Grey diagonal lines on my calendar - driving me crazy

Similar Questions

• How to get rid of the blue diagonal lines on my calendar?

  

  If it is a nested sequence, it could be that the media is shorter than the time on the timeline.

  It would also be as entry points and are resolved to make it shorter.

  Make sure that the tracks are not locked.

  If not those, then:

  See if Ann suggested here helps:

  Lack of chronology - help video

  See here, too:

  The blue diagonal lines & no reading

  Grey diagonal lines on my calendar - driving me crazy

• Satellite L750 - diagonal lines on the screen

  Last week my Satellite L750 had pale grey diagonal lines connecting the upper left corner to the lower right corner. They cover the entire screen.

  Tried to check for update nVidia drivers in Control Panel configuration, but Windows says I have the latest version.

  No idea how I can solve this because it is very annoying.

  How can you solve this problem?
  As a first step, you should check what is may be defective. I'm 100% sure that it has nothing to do with the drivers.
  What you can do is to connect the external monitor to your laptop and check if the same will be on screen. I guess not so in my opinion, your display is faulty and must be replaced.

• Clips in timeline showing diagonal lines gray, black mode reading without audio

  I have a project that I'm getting that last, I worked on a few weeks and I moved the folder but nothing has changed. However, now many clips have grey diagonal lines on them you see below. The reading is dark and silent. Time code did not change, interpret cadence and images settings are correct and unchanged files multimedia sources have not changed and no clips are offline. I rebooted the computer and the first and erased the caches. These same clips are also grayed out in all the previous backup automatically sequence, regardless of age. Help!

  

  Well someone suggested something that worked. I went back to the

  automatic backup until the problem occurred, unplugged my media player and

  Open the project. Once the film come link dialog box I reconnected it the

  support car and relinked. Problem solved.

  [Flotsam email deleted.]

  Post edited by: Jim Simon

• user with diagonal lines on his entire calendar

  I have a user with diagonal lines, for a full week on the entire calendar.  It's every day for the entire week.  Other weeks without lines, just this one.  You can still see his appointment.  Any ideas?

  Are we to guess what program the user, Outlook, WLM or?

• A white circle with a diagonal line appears when I turn on my Mac book air

  A white circle with a diagonal line appears when I try to start.

  If that's what you see, follow the instructions from Apple:

  

  Ciao.

• Satellite A660-07R: 3D display diagonal lines

  My a660 07R 3d portable satellite showing diagonal lines, color Rainbow. Help, please!

  Connect the laptop to external monitor and check if the same lines would be visible on the 2nd monitor.
  I guess its problem of graphics so the same line wouldn't be visible on another screen

• The difficulty to pass the black diagonal line that follows the clips in WLMM believe its called the toolbar. Sometimes it 'moves' and other times it will not move

  This question is more than 6 characters. I'm unable to move the black diagonal line preceding each video clip in WLMM, believe he is called to the toolbar. Sometimes when I left click it will move for me and sometimes it does not move or go anywhere. What I am doing wrong? In addition, there are a clip in particular that the toolbar will not pass through the play. Like the above, sometimes it works and sometimes not.

  Hello

  Given that the problem is related to Windows Live Movie Maker, I suggest that ask you your question in Windows Live Solution Center.

  Movie Maker - Windows Live Solution's portal

• Creation of smooth diagonal lines... ?

  Hello

  I use the online tool to create diagonal lines, but they are appearing rough or more pixels-y I want to (see photo below).  Is there a way to adjust things for lines appear?  thnx!

  

  Adding to this said JSM, I took a glance at the crescendo/decrescendos in the final and they look almost like they do in Sibelius. They look better printed, of course. Ultimately I wouldn't worry too much on this subject until the idea gets it's a crescendo.

  I am dealing with the worst with the typographical error in all directions in the impressions of partitions.

• A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  Means generally that you're trying to work on a layer locked.

• After installing lightroom cc, the photos show ok in library. When sent to develop module there is a blue screen with 2 white diagonal lines on pic. How is it removed?

  After installing lightroom cc, the photos show ok in library, but when the peak is selected and implemented development module, there is a blue screen with 2 diagonal lines white covering the picture. half of the photo will show when I put side by side feature on. How can I remove this blue screen.

  Edit/Preferences/Performance and uncheck "use graphics processor.

• Creation of diagonal lines of width to 100% in Muse

  I was hoping someone could help, by explaining how to create diagonal lines in Muse - but 100% width?

  The following link explains what I'm doing: vibrating - introduction of Panpan

  I want to create a site to a page with blocks / bands of color, but 100% diagonal angle.

  Any ideas?

  Penny

  They are probably just transparent PNG used as overlays or even integrated into the real background image. No magic involved.

  Mylenium

• Lightroom 6 develop Mode.  Screen loupe and compare view after screen show blue background with two diagonal lines of tbrl top low right another top right at the intersection of criss left in the Center.  If I move to another photo, the program stops

  Lightroom 6 develop Mode.  Screen loupe and compare view after show blue background wallpaper with two diagonal lines left and top right side of the other top right at the crossroads criss left in the Center.  If I move to another photo, the program no longer works and ends by asking me to close the program. Help?

  Go to your Lightroom preferences, performance tab, uncheck the option of the graphics processor.

• Cut a section of the diagonal line

  Hello

  I'm working on an invitation with line segments.  When I cut the line segment there is always a small gap when you zoom in, which is between the edge of the page to the line segment.  I'm looking to find a way to close the gap.  Using the scissors tool it crops not the segment of the line up against the edge of the page. A few tips on how to have a diagonal line with a line segment right trim? I also tried the knife and fade to and still sidelined.

  Help!

  See photo, for example the gap.

  Here's the video:

  If you have any questions, then just ask.

• How do a diagonal lines filling?

  I want to fill a simple box of diagonal lines. How to make a fill with different widths of line style?

  Ok. So what you want to do is to create a fill pattern. I'll try my best to explain it in terms of cs5 as bosses have changed since then.

  You must first create the lines. Draw two vertical lines high to 1 "ETV 1" out. Select the two lines, and then click object > blend > make. After mixing, click object > blend > mix Options. Check the "Preview" in the lower left. Click the menu drop-down (I believe the default is "smooth color"). Select "specified steps" and enter the values in the dialog box until the lines look appropriate on the other distance. When you are finished, click ok.

  

  Select the blend object, and then click object > break down. In the dialog box, make sure that only the "Subject" box is selected. Click on expand.

  

  at this point, you have a group of selected vertical lines. Rotate 45 group * draw a rectangle around the outer edges of diagonal lines.

  

  now that scale down so that the whole box is inside the diagonal lines.

  

  Select the two objects, and then click object > clipping mask > make

  

  duplicate this object and keep it on the side (because if you need to adjust the width of the line in the future, you will need this). now select the original one and go to your Pathfinder palette and click 'crop '. This gets rid of the clipping mask, so you're left with diagonal lines extended.

  Now drag the object extended/cropped in your Swatches Panel and voila. don't forget to name the new filling of model so that you can identify it (you do not want to have several different models, called 'New model Swatch 1' and 'new shade of motif 2 "etc. etc..)

  If you need to adjust the width of the outline for a different reason, see the duplicate what you did before and isolate the traits to adjust the width of the line and repeat the above steps to crop.