Grid Y looking positive and negative in CS5

Similar Questions

• How can I design square wave which has a positive and negative values equal to the other and separated from each other by controlled time or distance

  How can I design square wave which has a positive and negative values equal to the other and separated from each other by controlled time or distance, as indicated in the figure below. and enter this signal in a data acquisition.

  

  At the time wherever you go for the beautiful diadram, you could have done the vi

  Your DAQ would like a waveform (table of values and dt ak 1/sampling rate)

  If you set the sampling rate you know the length of the array, create a matrix of zeros and set the values of the two amplitudes...

  Because I don't want to connect other duties here are some photos

  And it does have a few drawbacks leaves to be desired in my solution, just think... rounding errors and what might happen if the tables are becoming more...

  

• Positive and negative frequency of calculation deviation

  Hello

  IAM with PXI-5620 to measure RF PXI 5600.

  I need to measure the frequency deviation, Positive and negative. The example or vi "MT DAMA demodulate FM.vi" gives peak frequency deviation . Can any please help me find the positive frequency Deviation and negative frequency deviation of her

  Thank you

  Niju.

  Hi Johanna,.

  First things first - 5620 5600 + combined is what we call a PXI-5660 RF Signal Analyzer.

  The PXI-5660 module cannot be presence via the driver NOR-DAMA. The Modulation Toolkit FM sample that you reference is for the PXI-5661 and SMU-5663 analyzers, both use the driver NOR-DAMA.

  You use MT ni5660 FM demodulation. vi, located under the ni5660 examples.

  Now to your question...

  When you perform an FM demodulation, resulting the Subvi MT Demodulat FM data frequency / time with the frequency values (Y axis), is compared to the carrier frequency specified. Thus, data deviation of frequency (Hz), function of time. All you need to do to get the positive and negative frequency deviation is to use LabVIEW table Max & Min primitive functions of table palette. This will give you the min and max value of the FM data that will be the negative peak and the positive peak frequency deviation.

  Concerned,

  Andy Hinde

  RF systems engineer

  National Instruments

• SELECT statement: summing up a positive and negative value

  If I want to get the sum of the positive and negative values, can I do it like this?
  
  
  Negative:

  Select sum(amount) INTO negative_amt FROM order where amount like '%-%';

  Positive:
  

  Select sum(amount) INTO positive_amt FROM order where amount not like '%-%';

  If this is not the case, how should I go about this?

  SQL> SQL> With t As  2  (  3  Select   -100 c1 From dual Union All  4  Select -300    From dual Union All  5  Select -15.6    From dual Union All  6  Select 90    From dual Union All  7  Select 80    From dual Union All  8  Select 300    From dual Union All  9  Select -203.8    From dual Union All 10  Select 922.56    From dual 11  ) Select Sum(neg_num) neg_num, Sum(pos_num) pos_num 12    From 13    ( 14    Select Case When c1 < 0 Then c1 Else 0 End neg_num, 15           Case When c1 > 0 Then c1 Else 0 End pos_num 16    From t 17    ) 18  /
  
     NEG_NUM    POS_NUM---------- ----------    -619.4    1392.56
  
  SQL>
  

• Calculate if got only positive and negative values

  I have this problem that I need help.
  
  I have this table called MESSAGES. There fields client_name and AMOUNT like this:
  
  MESSAGES*.
  
  CUSTOMER NAME_
  Amy
  Amy
  Amy
  Bill
  Cheryl
  Cheryl
  
  AMOUNT
  500
  -200
  -100
  -111
  50
  100
  
  
  As noted, my client AMY has 3 quantity: 500, -200, -100. I want my PL/SQL in order to calculate to summarize these amount if the amount of the same client_name 1 has a value negative and positive, and all remaining the same if all of its values is positive or negative.
  
  Result:
  
  CUSTOMER NAME_
  Amy
  Bill
  Cheryl
  Cheryl
  
  AMOUNT
  200
  -111
  50
  100
  
  How am I suppose to do?

  Hey lee,

  hope this helps

  SQL> SQL> Create Table lee_test As  2  (  3  Select 'Amy' Name,   500    amt    From dual Union All  4  Select 'Amy'    ,    -200          From dual Union All  5  Select 'Amy'    ,    -100          From dual Union All  6  Select 'Bill'   ,    -111          From dual Union All  7  Select 'Cheryl' ,    50            From dual Union All  8  Select 'Cheryl' ,    100           From dual  9  );
  
  Table created
  
  SQL> SQL> Select Unique  2         Name,  3         Case When min_sign != max_sign Then Sum(amt) over (Partition By Name Order By Name)  4         Else amt  5         End amt  6  From  7  (Select Name,  8         amt,  9         min(sign(amt)) over (Partition By Name Order By Name) Min_sign, 10         Max(sign(amt)) over (Partition By Name Order By Name) max_sign 11  From lee_test 12  ) 13  Order By 1;
  
  NAME          AMT------ ----------Amy           200Bill         -111Cheryl         50Cheryl        100
  
  btw: are you chinese (cantonese??)
  

• Guagewith scale positive and negative scale

  Hi all

  I thought it was simple. I need a gas reading of 0 to + or - 180 degrees either side of GUE positive readings figures up to 108 degrees, and the other side negative readings to-180 degrees

  Several skeins

  Greg

  1. use the text tool and enter the values on the ends of the scale.

  2 properties: scale. Enter the minimum and maximum values.

  3. other ways also exist, such as the nodes property.

  Lynn

  

• positive and negative rotation numbers

  Hi all

  I create a roulette game that calculates the winning number based on the rotation of the main wheel. I'm if/else using statements to determine the winning number based on the rotation. I am tracking the rotation in the output panel. I want my rotation to go between 0 and 360, but the output panel trace 0-180, then it starts from "-180-0."

  The wheel can turn several times. No idea how to keep the positive numbers between 0 and 360, and do not have to write my if else to accommodate negative numbers?

  Thank you!

  var rot: Number = (whatever._rotation+360)%360;

• angles, positive and negative area on a plot of polar

  Is there a way to label the sector on a polar plot angles with +/-values? We generate a lot of bosses of directivity of sonar and angles scored from-180 to 180 instead of 0 to 360 have long been the norm. Looking at the definition of the curve and Polar - display the tab - it doesn't seem to be an obvious way to do it.

  Hi Greg,.

  Unfortunately, there is no way to do in tiara at the moment. I presented a report of Corrective Action to resolve this (#323394), and I hope that this feature will be included in a future version of DIAdem. Thank you for that bring to our attention.

  Kind regards

  Jackie

• Looking for help to find articles or resources to learn more about how to migrate to a new computer and also upgrade CS5 to CC at the same time. Can I migrate and then upgrade?

  Looking for help to find articles or resources to learn more about how to migrate to a new computer and also upgrade CS5 to CC at the same time. Should I migrate and upgrade?

  You don't want to think in terms of migration when it comes to Adobe software.  You must install using installation files.  There is no need to have installed CS5 unless you plan to use it.  There is no way to upgrade of CS5 at CC, there is a reduced plan should soon be interrupted.  You get the first annual subscription for almost half of the normal price.

  Creative cloud plans

  https://creative.Adobe.com/plans

  Director of the installation:

  Download/install the desktop application, connect and install applications subscription.

  Creative cloud to desktop
  https://helpx.Adobe.com/creative-cloud/help/creative-cloud-desktop.html

  Sign out, sign in | Creative office cloud app
  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  Install, update, or uninstall applications
  http://helpx.Adobe.com/creative-cloud/help/install-apps.html

• well... try #3... I spend 80% of my life offline... off the grid, as I live in a remote area, the power produced by wind and water. CS5 or 6 is still available? I also hate the Basic applications to... any help here?

  well... try #3... I spend 80% of my life offline... off the grid, as I live in a remote area, the power produced by wind and water. CS5 or 6 is still available? I also hate the Basic applications to... any help here?

  We're just facing some misinformation: creative cloud, CC of Photoshop, Photoshop CC2014 are NO CLOUD. Yes, it is a name quite stupid, because.

  They install and run locally exactly like previous versions. They are different in three ways:

  1. simple integration of cloud services from Adobe to keep the files, which you can ignore.

  2 subscription only.

  3. you will need to regularly connect to the internet to verify your subscription status. Not sure it can be monthly. This could still be unsuitable for you of course.

• iTunes 12.5.1.21 not remember iTunes position and size

  Update iTunes 12.5.1.21.

  Win 10 (v1607) does NOT remember iTunes position and size.

  My system uses two monitors with extended desktop. I would like to put iTunes on the 2 left / top of the page. But after the closure and revival, iTunes always appears in the center of the screen 1 and the original size when updating. She also can't remember the last page of the articles that appeared, for example, Podcasts, applications, etc. When iTunes has been closed. Instead always defaults to the page music.

  Also on launch a screen "Welcome" iTunes with No thanks / OK buttons on bottom is displayed momentarily before displaying the page of music. There is not enough time to read what this screen offers. Looked in the menus to try to find this page to display... no luck.

  Anyone else having these issues?

  Same problem here.  Very annoying.  Each time is like the first time, which is great when you talk about sex, but not when you run iTunes.  All versions up to now has been able to hold its window size and position, but not anymore.  I also find the interface is very slow to boot.

• Where can I find the tutorial or sample Vi to control the position and speed of the stepper motor?

  Hi all

  I use a driver on 3rd for a stepper motor and I use USB6356 as the controller to drive the motor. Could you recommend some VI sample or tutorial on the position and the speed control of stepper motor?

  Thank you

  The best

  I think that what you are looking for is the LabVIEW SoftMotion Module:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/14234

  Here is a good resource on stepper motor theory:

  http://www.haydonkerk.com/resources/StepperMotorTheory/tabid/192/default.aspx

  My recommendation would be to start from a counterexample of LabVIEW. These can be found in LabVIEW > help > examples > material input and output > DAQmx > input meter, output meter.

• How do you know if there are more positive or negative numbers?

  I'll try to explain my problem with an example, because I do not have labVIEW installed in the computer.

  I have 10 numbers and multiply to 10 other numbers

  and of course I get 10 results, after I have to show the value of meddium of this 10 results and must show the signal that most seem (+ or-)

  My problem is to show the signal, if I have 7 positive 3 numbers and negative numbers, how to measure and display the negative signal to the final?

  example:

  -0,3-0,8 1 0.3 0.6-0.7 - 0.1-0.5 0.3-0.4

  If I have to put in the final:

  -0.5

  Thank you

  You can do something similar (Simplified) altenbach proposed:

  

  If the output is true your table has more positive values.

• Rigid body position and Orientation control via screen Simulator

  Hi all;

  I want to simulate a robot manipulator a LabVIEW Module of 2013 robotics.

  I watched a video on YouTube and get a few question marks.

  The link is here

  In this VI, the desired position and orientation of the definitions effector

  is obtained via the Simulator window

  First;

  I want to know How can I control the position and orientation of a rigid body through Simulator display with a mouse?

  Thank you for your attention

  I asked around and it looks like our team in Shanghai may have the code that was used in the video. I'll let you know what happens in the next few days, we have an example of community in the works.

• Digital photo looks like color negative

  HP Photosmart Premium 410; Windows XP SP3, no changes made to the system or software.  Digital photo looks like color negative.  Replaced all ink cartridges and printing of always the same.

  Hi partners,.

  Using new OEM or remanufactured cartridges?

  Follow the steps below and let me know if you get better print quality?

  Note: You can run the printhead over to once cleaning process to properly prime the printhead

  Clean the print head

  Follow these steps to clean the printhead from the printer control panel.