Grip and HP m9380.be, a gel

Similar Questions

• My V5-571 CAREB is extremely slow at startup and would become very hot gel frequently

  My laptop CAREB 571 V5 running on Windows 10 is extremely slow at startup and becomes very hot, gel frequently.

  I recommend reloading the windows to see if it helps the slow and freezing. If it is not the case, I suggest that you contact technical support for repair options. I am including the instructions below to reload Windows without losing any data.

  http://Acer.custhelp.com/app/answers/detail/A_ID/37335

• Laptop brightness is increasing and decreasing of its own, gel Touchpad...

  Hello

  I bought my phone yesterday and found that its brightness is increasing and decreasing of hers... it is not even always...

  His problem with displaying his looks...

  Touchpad freezes also on several occasion... very annoying sound...

  Please such the solution else I will return the laptop... I don't want to keep the defective part with me...

  Hello:

  I will not be able to help you with why the touchpad does not work.  Maybe it's a defect.

  Have you installed the latest driver of pad touch support page for your laptop?

  Any laptop you buy that comes with W8.1, you can have the screen brightening and the thing was dimming.

  This is because there is a new setting in Windows 8.1 called Adaptive brightness.

  If you find it boring (what seems do you), you can easily disable the Adaptive brightness adjustment.

  Please see this link for information on where to access this setting.

  http://www.eightforums.com/tutorials/6042-Adaptive-brightness-turn-off-Windows-8-a.html

• Very slow grip and HP pavilion dv6

  Help me pavilion computer HP dv6 bought 1 and there is a year and a half, and these days in the first 5 minutes after the start, he crashes and is also slow. I have to force reboot holding the power button in front of stop suspension. I did a full scan on the titanium trend micro but he says everything is fine, and today it maintains suspended anything, could not get the computer to work and cannot access the verification of reliability because it loads for a long time and then crashes my computer. Right now my computer says one of my disks needs to be checked for consistency and scans now. How can I fix hanging and slow?

  Hello

  Shut down the laptop.  Tap away at the esc you key start Notepad to open the Start Menu.  Select the BIOS (usually f10) and under the Advanced or the Diagnostic tab, you will find the possibility to run tests on the hard drive and memory.  Post back with the details of any error message.

  Kind regards

  DP - K

• errors.__Programs bad image Explorer.exe and dwm.exe chrome.exe gel!

  Laptop has gone haywire, a couple of days and were not abloe to use it since. End laptop will start, then freeze as soon as I click on something. The cursor stays on loading mode (blue circle) until I have to manually turn off. I ran windows Defender, but he couldn't finish before freezing. I had Google chrome.exe bad image or dwm.exe and explorer.exe errors pop up. I even tried to run in safe mode, but my malwarebytes scan froze at the 6 minute mark. If all else fails, I'll have to re - install Vista, but hoped for more suggestions of your savvy it professionals there. IM on Vista Home btw.

  Altogether. Yes, you can replace a hard drive in a laptop. If the laptop is still under warranty, contact Dell technical support. If this isn't the case, you can buy a hard drive for the laptop to your favorite online or offline store. I normally buy equipment in NewEgg.com. Of course, you will need to install Windows on your new hard drive. If you do not have a recovery with her media, you need get the Dell disks. After you have installed Windows on your new hard drive, if it was not with a recovery disk, you will need to download/install drivers and utilities from the Dell Web site, update Vista Service Pack 2, do all the Windows updates, install a good antivirus (I recommend ESET NOD32 for a commercial and Avast for a free) restore your data from backup.

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  Dell - request backup discs - http://support.dell.com/support/topics/global.aspx/support/dellcare/en/backupcd_form

  MS - MVP - Elephant Boy computers - don't panic!

• Windows 8 guard slows to grip and 100% use of the disk.

  original title: upgrade to WINDOWS 8 PRO - system crashes - no Resposnive

  I had recently upgraded family basic form win7 Windows pro. My laptop does is VPCEH15EN from Sony. By Download Upgrade Assistant I had updated. The 1st time, my system became dead slow. After reboot, I found that my use of the disk is 100% all the time. With very little knowledge I had killed some of the background process that I know (and also a few random apps) use of disck came dowm. Here begins another problem. Am not able to uninstall, open Task Manager, change some settings etc... Can help. I have 8 GB of ram, processor i3, 64-bit

  Hello

  I had this same problem, my computer laptop lenovo would remain idle for about 15 minutes, then go back, 100% use of the drive, but not the tag to any process.

  It was a scheduled defragmentation task.

  Task Scheduler open-> Microsoft-> Windows-> Defrag

  Disable or delete the task.

  Hope this helps someone else.

  I thought it was drive problem hard as the computer would be useless without restart using the power button.

• used grip and WIRING

  Hiya,

  I finally bought a camera and is about to shoot some interviews (head and shoulders stuff) using tungsten lamps.

  I am looking for the material used as supports for c, 2 k lights (pars, powerful moles of things like that) and small lights like inkies and tweenies etc...

  barn doors, gelatin and various tricks associated with...

  In addition, flags and nets (24 x 36) and a few 4 x 4...

  I'm sorta more interested in hearing people that I know who have been around in the forums for a few years only because of the issue of 'trust' about transactions of money and do not care to hear about eBay and other sources... (Sorry, but I got that covered already).

  I know this expedition thing is a pain in the neck, etc. and will pay for it of course...

  Just thought I'd throw this little idea for regulars and is no big deal... like, I can buy the stuff I need again, but if I can get it used that gives me more money to upgrade computer and get cs6... .as I am limited with $$ I can use to

  Buy camera, lenses,

  lights, stands, flags

  cs6 computer stuff and various

  ACK!

  You are used to the big things, that I can see is where you're leaning.  But yourself, you may want to consider a new technology that can meet your needs perfectly, now smaller for a much lower cost.

  Specifically, LED lighting. You can pick up a complete kit at B & H for under $ 500 that would work very well for interviews.

• Svchost.exe is free running and leaves multiple windows open all gel. Re-loaded windows XP after a crash with original rescue records.

  Original title: Windows XP - free race - is lost.

  Just re - load windows XP after a crash with original rescue discs, svchost.exe is free running and leaves several Windows Open gel, all on and offline. Any ideas? I ran ms-fixit beta for all listed. I also disabled Norton and now use Windows Defender, still no luck.

  Hi MarkBerri,

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  Svchost.exe is a process name generic host for services that run from dynamic link (dll) libraries. The Svchost.exe file is located in the folder C:\Windows\System32. At startup, Svchost.exe checks the registry services part in order to build a list of services that it needs to load. Multiple instances of Svchost.exe can run at the same time. Each Svchost.exe session can contain a grouping of services. Therefore, separate services can run, depending on how and where Svchost.exe is started. This grouping of services enabling better control and easier debugging.

  Svchost.exe groups are identified in the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\Svchost

  You can run the auditor of system files on the computer.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:

  http://support.Microsoft.com/kb/900910 (valid for Service pack 3)

  Hope this information helps.

• Problem starting el capitan (sierra) - built-in keyboard and the mouse do not respond

  Hello

  I have a 2015 macbook pro (SSD 256, 16 GB of RAM last el capitan updated) with a wired problem.

  I use it mainly to a cinema monitor and I use wireless keyboard and mouse (office installation program), and of course as a stand-alone laptop when I'm not at my desk.

  When I put the laptop to sleep, everything works fine when I wake up.

  but, if I'm away from the office and I have to restart my laptop, here is the problem.

  The boot process is very very slow, there is no edge, and when I finally have the screen to unlock the safe, the keyboard and the touchpad do not react. Actually, that's not exactly true, they are so slow that they are unusable and get caught quickly, all gel. So I can't unlock and complete the boot. My laptop is unusable ;-(

  At this point, I get a message that if I forgot my password I just need to reboot by pressing the power button, and I'll be able to reset it.

  When I do this and aprΦs the dΘmarrage that more slowly than usual but ok, I get another screen with several options of problem solving. One of them is "keyboard not responding do not. When choosing this one, it asks if you want to remove safe. I tried and everything was back to normal.

  later, I delivered safe and I had the same problem again. I did the thing to be able to restart again and improved to sierra in the hope that it would disappear. However, the problem is still there.

  I thought I could try to restart my office to see if my keyboard and wireless mouse would still work. Indeed, even if responsiveness was not normal, I could unlock and fill the chest.

  I have the impression that my laptop always "believe" it is on my desk, linked to my screen (probably the reason why I don't hear the Bell) and to my wireless K & M.

  It's really annoying and I hope someone has a solution.

  Thank you very much

  best,

  Alex

  I'm having a similar problem with macOS Sierra which I didn't have with El Capitan.  I can possibly move the cursor on the power button and turn off (no), but I must be patient because the keyboard and trackpad are only for a fraction of a second, which only allows me to move the mouse slightly.  After he stop and start back up, everything is perfect until I tried another reboot, and then I'm back to the beginning.

  I tried to reinstall the operating system, reset the SMC, resetting the NVRAM, reboot in SafeMode... nothing worked so far.

• RN316 - Pack of broken - Silica Gel beads to the unit

  It never ends!

  I ordered a RN316 to replace my 6 Ultra. The unit arrived today and the pocket of silica gel opened its doors kind of packaging or shipping.

  These crazy pearls are inside the unit. Am I void my warranty if I open the machine to get out or there at - it another way to solve this problem?

  Hi Mook1,

  I'm sorry to hear about what happened to your newly ordered NETGEAR ReadyNAS. Where did you order article? Better report their so a replacement can be delivered before the end of the week (possible free & fast).

  Kind regards

  BrianL
  NETGEAR community team

• Using the drive almost always at 100% at the start and sometimes at other times

  Recently, my laptop seemed particularly overwrought, even when executing threads. Whenever I start it (and also sometimes at random so that I use for light work), it is much slower than it has been in the past, and when I check the tast Manager, it says that the disc is in 90 to 100% almost every time. So I watch programs using the floppy and almost all of them use it with a rate of 0 MB/s, and all other use at a fairly slow pace. I know it's normal for notebook computers to slow down over time (mine is a little over a year old), but I wonder if it is an expected behavior. I find it odd that the drive is the treatment so furiously, but it seems to me that no program is really use it. I enclose below, pictures of my complete task manager a few minutes after starting.

  My processor is an Intel i7-4700MQ CPU @ 2.40 GHz and I have 12 GB of RAM.

  @MirandaSnow ,

  Hello and thanks for the display on the HP support forums.  What you have going here is not a hardware problem.  It is a common problem with windows 8.1 and an update.

  Here are some links that I could find that should help you with this problem.

  Use of the disk Windows 8.1 100%

  Windows 8 guard slows to grip and 100% use of the disk.

  How to fix: problem of its use for the drive 100% Windows 8

  Let me know how things are going with this.

  Thanks again for posting and have a great day.

• the mouse freezes and bumps all the time

  I have my mouse and it freezes in place and bumps, it almost constantly. Help

  I finally found a solution for the mouse freeze problem which has been a pain in the A * because I bought the wireless mouse and used with my Windows 7 laptop. Try it to see if it works for me.

  THE MOUSE FREEZE PROBLEM SOLVED! (HOPE THIS HELPS)

  >>
  Mouse freeze problem is more likely to be linked to the USB SUSPEND MODE as most mice now use the USB port to connect the blow in.
  >>
  You can try this out. It works for me.
  >>
  Go in select
  >>
  According to what plan of power, you are 'Balance' or 'Power Saver', select the accordingly
  >>
  Select and expand <+USB settings="">by clicking the <+>sign
  >>
  Enlarge it <+USB selective="" suspend="" setting="">by clicking on the <+>sign
  >>
  Set both & on "Disabled" and click 'Apply'
  >>
  GEL MOUSE (SUSPEND) PROBLEM HAS DISAPPEARED FOR ME!
  >>
  Hope it will be useful.
  >>
  See you soon,.
  >>
  cybersam999
  >>

• keyboard and mouse freeze, hang, do not work

  again, the question was better but once again tonight.

  I have windows xp pro, acer power non-portable pc, ps2 requires laser (not wireless) mouse.

  at random times and programs, they will work and the mouse may hang and then keyboard. Sometimes I can take the mouse out of the back and use it in another form. Sometimes he stop and go in that direction or not responded on the card, even if the light is on. I heard today 3 beeps of the tower and the keyboard and the mouse has frozen.  If the keyboard is blocked so the only thing I can do is turn it off and restart. I don't think not that it's too hot because the problem may start immediately or later. the Device Manager in the Control Panel indicates these 2 works correctly and I can't find a place to make sure market. I clean the heat sink.  I'm not real smart but suggestions. What do the beeps mean.

  I finally found a solution for the mouse freeze problem which has been a pain in the A * because I bought the wireless mouse and used with my Windows 7 laptop. Try it to see if it works for me.

  THE MOUSE FREEZE PROBLEM SOLVED! (HOPE THIS HELPS)

  >>
  Mouse freeze problem is more likely to be linked to the USB SUSPEND MODE as most mice now use the USB port to connect the blow in.
  >>
  You can try this out. It works for me.
  >>
  Go in select
  >>
  According to what plan of power, you are 'Balance' or 'Power Saver', select the accordingly
  >>
  Select and expand <+USB settings="">by clicking the <+>sign
  >>
  Enlarge it <+USB selective="" suspend="" setting="">by clicking on the <+>sign
  >>
  Set both & on "Disabled" and click 'Apply'
  >>
  GEL MOUSE (SUSPEND) PROBLEM HAS DISAPPEARED FOR ME!
  >>
  Hope it will be useful.
  >>
  See you soon,.
  >>
  cybersam999
  >>

• EOS M accessory Grip

  Anyone who uses the EOS M with the EF adapter probably knows the major problem of this great theory installation - balance. Compatibility EF was the reason number one, I bought the M, mainly for lighter weight and no slap shutter. It works well with the privileged on AF lenses, but with zooms or manual focus, it really does balance the difficult camera by rotating the zoom or focus rings. The grip on the M is way too small to support the weight of the largest EF lenses, not to mention the mount EF - M was not supposed to bear a lot of weight, so the tripod on the EF adapter.

  So I got to thinking, why not an accessory grip that screws in the bottom of the EF adapter? It would be very simple to mount on the tripod adapter support (or better yet, remove the adapter from tripod and screw directly on the EF adapter, with a rounded joint more support) and Gush a handle molded to meet the existing handle. It should be just a half inch solid somewhere really nice to hold.

  I throw the idea out there to see if anyone likes it, and maybe someone with a 3d printer would try prototyping one. If there is enough interest, maybe it's a kickstarter campaign.

  SOLVED!

  Here's a grip and a thumb rest for you! I ordered it.
  https://www.YouTube.com/watch?v=gOe02X0HpYQ

• Computer freezes for a split second every 3 seconds, the cursor disappears for a split second and the clock freezes and restarts.

  Original title: OS time questions continuum (microfeezes)

  It seems that my computer freezes for a split second every 3 seconds approximately. My cursor disappears for a split second, and because the clock freezes and restarts, it displays a worst time of the day. Audio and video have the same gel splitsecond. The problem persists in safe mode. Dell Inspiron 1520, servicepack2 of vista running. I've never had any problems with this machine. Here's a video I took of the number: http://youtu.be/fbUeK8U7wHw

  I would like to know if there is other info/specifications that could be useful.

  Thank you.

  Good,

  1:
  Updated the chipset drivers even though it said I was with the best.

  2:
  Run a SFC scan, which revealed no violations of integrity or files not repaired.

  3:
  five hours and 8 infected files later, my computer is totally cleaned.

  I opened the event viewer, but I don't know what I'm supposed to be looking for. There are many changes to the machine because it began to act up, which were intended to correct the problem. I installed the Service Pack 1, then 2, scan MS Safety and new chipset.

  I also ran a memory diagnostic, but all was well.

  What should I look for in the event viewer? I know that the problem started in a 12 hour window. Should I save and post the logs at the time?

  There is a certain mystery. We need Sherlock Holmes.

  -UPDATE

  I have reset the system to its factory settings. Now, it's as if it were new.

  The problem persists. He still hiccupping. It freezes again for a few milliseconds about once per second. And I'm going crazy.

  UPDATE 2-

  The computer was closed for about 12 hours and when it restarted and Windows initialization complete, the problem disappeared. It works normally for a vintage computer 2007. I'll let you know if I learn more.