Group incoming Boolean data in groups of two

Similar Questions

• Regenerate the Datastore groups every two minutes

  Hi all

  Currently, I have added a NFS data store on my ESXI hosts and now every two minutes I see regenerate the Datastore groups every two minutes. My VMKernel is set on a group of ports DvSwitch and MTU 9000. The Load Balancing Teaming and failover strategy he set for road base on physical NIC load. No idea why this happens or if this happen to someone can point me to the right direction.

  Thanks for any help!

  OK, I made myself. This problem was linked with the MTU not set correctly on the DvSwitch himself. Once I changed the Maximum MTU on Advaced Options, he stopped.

• Create a group of two separate reports on a dashboard

  Hello
  
  I have a dashboard consisting of guests (several filters) and two separate reports below that the display of the results according to the selected criteria. Please make suggestions if it is possible to change the dashboard so that I would have a group (one of the filters) placed above this group and two reports would be applicable to these two reports.
  
  For example, one of the filters is store #. If I select two stores, then both reports display the information summarized for those two stores. However, I would like to have a breakdown of these reports for each individual store. The dashboard should show #1 and two Store associated with this followed Store #2 #1 store and two reports associated with this #2 store.
  
  Any suggestion is appreciated.
  
  VP

  VP2 wrote:
  David, if I, say, 2 reports placed side by side I can see groups for each store on a single page. However if I have 3 or more reports and they can fit on one single page next to each other. How can I place a third under the first report? If I put the third report under the first two, first the dashboard prints two report with stores like groups and then prints the third report after them. I would like to be able to print all three of report for a store on a single page.

  Thanks in advance

  Published by: VP2 on April 25, 2011 13:16

  Published by: VP2 on April 25, 2011 13:17

  I'm confused by what you say. Please explain how you organize the reports in sections and columns for I can get a better idea of what you're trying to do.

  If you want to print at the same time the "3 reports" for a store, you can do something like this. (Even once, I cannot understand your needs after the last post, so please explain if this isn't answering your question.)

  One thing you could do is put to all the columns of your three reports in view of criteria. Then, you can create 3 PivotTables with each report with only the columns for this particular report. Now you can put all pivot tables three compound mode set by giving 3 reports on the store in question.

  When you print, the three reports will print together.

  BTW, do not use this method, the Store column must be in the Pages section of the PivotTable. You must select each store, but when you do, you'll have three reports corresponding to this store together in one place.

  Edited by: David_T April 25, 2011 10:31

• You can import data field twice - need two of each person

  I'm a member of a club card. They want two cards by excellent field. So, if the line is John Smith, I need 2 cards with the news of John Smith, Jane Doe 2 and so on. I have 119 names and eventually need 238 merged fields. And before you tell me two print side up, it goes to a specialized card printer and they specified a file with 238 merged cards. Any advice appreciated on getting the data merge to do two of each row of data (name, your member number, active/inactive member). Thank you.

  Make sure you have facing pages not controlled in the document format.

• split the data belonging to the same group at two different levels

  Hello
  
  I have data in the same group I want to split into two levels.
  
  For example: If the XML is:
  
  < data >
  Taxable < Type > < / type >
  < value1 > one < / value1 >
  b < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  e < value1 > < / 1 >
  f < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  g < value1 > < / 1 >
  h < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  u < value1 > < / 1 >
  v < value2 > < / value2 >
  < / data >
  < data >
  Taxable < Type > < / type >
  o < value1 > < / 1 >
  < value2 > x < / value2 >
  < / data >
  
  
  The output using the RTF model should be:
  
  Taxable
  a and b
  e f
  g h
  
  Not taxable
  u v
  l x
  
  I can't change the query to add a group.
  
  Kindly, if anyone can help
  
  Published by: user10606061 on 25/06/2012 01:05

  
  

  delete a table with 2 columns and two rows. In the second column of row 1
  
  in column 2
  

  table below
  

  PS: your must be within a root element

• A group of two calc script?

  So I did away with budget group vs group planned and created a group using substitution variables to control if users can load. Works beautifully. So less maintenance. But now its time to budget and we have a problem: we need users to be able to run the two buds Calc... 14 and 13 fcst.

  We cannot have users see all the CALC that someone could erase data by mistake or run the Calc evil. Any suggestions or do I need to create two groups again?

  You can assign several Calc to a group outside the SSP by using grant maxl.

  Grant execute 'Sample'.' Basis '.' CLR' to the group 'testgroup2 ';

  Grant execute 'Sample'.' Basis '.' clract' to the group 'testgroup2 ';

  If you have multiple databases, I think he'll throw some warning on request have several databases, but the grant will work.

  Cameron already posed the question that was in my mind, you're looking at a problem of security.

  Concerning

  Celvin

• Grouping of two fields

  Hi all
  
  I have a small request. Can assemble on two fields in a simple ForEach loop?
  
  In my report, I have two columns from two different sets of data, and I want to group my report on two of them.
  Currently uses a foreach and grouping on fields. But it does not work.
  Here's what I do.
  
  <? for-each-group: opportunity; Country, Closedate? >
  
  I have to define two loops for each?
  
  Please suggest me.
  
  Thanks in advance,
  Imtiaz.

  You can try this:
  

• User authentication groups WebVPN two tunnel

  Hello, I have two groups of tunnel using WEBVPN, I have ASA 5510 version 7.2 local users.

  How is it possible to authenticate a user in one group?

  Now, with local users, I loggin in both groups of tunnel

  Hi, Caesar,

  You can use the 'group-lock' for this feature:

  name of user attributes

  value of group-lock

  HTH

  Herbert

• Same radio buttons (groups) on two pages

  Two PDF pages with forms: for the most part the same - first of all the page for company, second for the customer. Contains the same forms (differences above, marked as copy for the customer or for society + some additional images on companys copy).

  In Acrobat Pro MS I did and copied shapes from the first page to the second, so they have the same names, and after completing their on the first page, same forms are automatically filled on second too (as expected).

  OK to the check boxes and text fields. Problem with just the radio - changes buttons are not copied to the second page. And when the radio button is checked on the second page, radio buttons in the same group on the first page will be disabled.

  For now, I removed radio buttons copied on the second page (3 groups with 2 to 4 radio buttons) and created new ones (with new names). They can by completed independently (variations on a single page will not register/unregister radios on another page). Better, but not perfect.

  Is it possible to make radio-buttons work even in the text and checkboxes? Thus, when filling on the first page, the changes are automatically copied to the second page (and when someone make changes on the second page, they are copied to the first page too).

  Thanks for the advice (and patience with my English).

  Go to the properties of one of these boxes and option under the tab tick box Options "buttons with the same name and the choices are selected in unison.

• Grouping of two small objects done overall size change (huge) in the Info palette

  I have a logo that I am grouping two small items. When separated, the piece of text is about 2inches wide and the mark above is approximately 1 inch wide. However, if these two group objects, the size appearing in the palette of information or the transform palette says that the group object is 227.5417inches. Is - somewhat weird glitch in Illustrator? On different sets of objects I group.

  Looks like you have a Guide that is included in one of the groups. Delete it and try again.

• Two groups and two without

  Hiya,

  I'd do it liketo share with you a few problems I found in my environment.

  I have bunches of towing appointed like GOLD and SILVER.

  GOLD group consists of 3 ESX 3.5 and an EMC SAN.

  Cluster's MONEY is devoted to the ESX 3.5 5 and a BULL SAN.

  A call from VCS CONSOLE manage GOLD and SILVER clusters and is attached to EMC and BULL without.

  On SAN BULL, we use a LUN for the models. We manage the same models for both groups. When I try to deploy a model of the GOLD cluster, the process of becoming very, very slowly. I guess this deployment is done through network (a Gbit/s connection) between CONSOLE (VCS) and a GOLD ESX Server... is it true?

  How you implement templates?

  Maybe have a LUN on EMC SAN and scpying models each time that change you?

  Can be role models on the RESUME and spread to SAN SAN?

  Any comments would be great...

  Thank you

  If you want to limit the time of deployment, then you need to maintain multiple copies of the same model.  It is not very effective as now you can have the same changes not reflected in both models.  Given that the SAN do not replicate to get a picture of one to the other will require a kind of network.  Anyone of ESX when you deploy everywhere without, or scp, belongs to you.  Personally, I keep my models in one place and let the deployment task to copy network for me.  If I have to deploy several s vm, then I will deploy a model and then clone the new VM as long as I need.  Depending on the size of your model, this process must generally be fast enough.  For this reason, a NFS data store is also common to store templates, but with several without, except if you copy the model in each of them, network copy is involved.

  -KjB

• I have a few groups of troubled spacing of text boxes. Someone at - it automated a way to distribute the space between groups of two text boxes?

  It of not much more to this issue. My format works like this:

  Title H2

  Explanation of H3

  Title H2

  Explanation of H3

  Title H2

  Explanation of H3

  I need to distribute these evenly text boxes towards the bottom of my page. It's a bit of pain to do manually. Since there are other objects on the page, spacing guidelines to throw out of whack. My safest way is to create a box, line it up at the bottom of the first group and the top of the other. Then repeat all the way to the bottom of the page.

  I thought to use a text box, but it was rejected. I need to have content pulled from other parts of the site. That is not possible with the single text box. In addition, it is easier to format individual text to text box.

  If someone has an idea, I'd love to hear it.

  Thank you.

  Yes, which makes it difficult. The only way I can see to get around it is to temporarily remove the 100% width, so you can group objects, and then come back them once you have changed the spacing.

• How grep connectors in a group, between two words required?

  Must catch some connectors between two words in a very comprehensive document.

  1 Joanna of Smith

  2 Felicitas of the Tour

  3 Perpetua is Beatrice Kennedy

  but the solution is very poor resolved in three steps and it seems to be just one channel.

  {1 < \u\l{2,}of (\u\l{2,})+\ >)

  {2 < \u\l{2,} Delcourt (\u\l{2,})+\ >)

  {3 < \u\l{2,}y (\u\l{2,})+\ >)
  

  Try this one:

  ((? \u\l+)+((de) (la)? | y) (\u\l+)+)

  It seemed to work when I tested it on your sample.

• LAbview program behind schedule and displays the data arriving more than two minutes ago

  I am currently using two OR 6070e daq cards PCI (16 analog inputs on one) which are syncronised in the software. In the producer I loop gain of 32 channels data and do my processing on the data in the loop of the consumer. Each signal is displayed on a waveform graph. I have sample at 32 kHz to my problem is that my software works well, but it lags behind in the necessary time sto updated graphics. More I run the software becomes more lag. For example, data showed the field of waveform if poster both 5 minutes after the due event. Even if I use a lower sampling rate (3 kHz) continues to accuse software. The number of samples, I've read is always a second of data. How can I make this software performing near real time with out such a big lag. I need to run my software on a windows OS. I know that you won't get no hard real-time running labview Windows OS, what can be done to improve the speed of my program.

  1. another question on the data sheet of the data acquisition card NOR 6070e PCI indicates the size of the buffer FIFO is 512 S. Why can I in labview set myh size buffer to a value greater than 512 samples. For example when I taste 1000 Hz and read 1000 Hz off buffer I exceed the isze of buffer FIFO data acquisition card, but my program still works.

  Cordially (sorry for the spelling error typed this quickly)

  the main VI is DP_software

  You do not have something interesting to look at.

• How to lock the indicator of Boolean data

  Hello guys,.

  Good night

  I have a problem with indicator (lamp) Boolean

  In my project.

  When the value of > 7 1 lamp lights

  When the value< 5="" the="" lamp="" 2=""  turn="">

  I want,

  1. If the lamps > 7 value locked, so before the value< 5="" the="" lamp="" 1="" always="">

  2. If the value < 5="" lamps="" locked,="" so="" before="" the="" value=""> 7 the lamp 2 always on

  Sorry 4 bad English,

  NB: vi on join post

  Thank you

  Stewkidz

  See if it works as expected.

  (Note that some things could be improved by the use of compound nodes, but this code is clearer. There are several ways to do so. I would probably use an array of two Boolean values in the shift register, and one each for the Boolean operations)