Two groups and two without

Similar Questions

• Group and ungroup without all the data to a single layer?

  Hello!  When I combine several functions (usually for purposes of alignment), separating them and then throw all the objects on a layer.  It's pretty frustrating; Anyone know a work around?

  You need to revise your workflow. When you group things they belong on the layer of the object higher in the Group and when you release that's where they stay. You could try to save a selection instead of a group for purposes of alignment by watching. A selection can have objects on multiple layers.

• A pencil of Apple can be used on the two iPad Pro - a large and small - without having to plug on the iPad?

  A pencil of Apple can be used with two iPad Pros - a big and small - without having to plug into each iPad before each use? The same pencil, Apple will be able to come and go between two iPad Pros?

  You can use a pencil of Apple with more than one iPad Pro, but you still need to plug pair to use with each device, serparately.

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.

• AnyConnect tunnel-group automatic assignment without selecting any group-tunnel-group-list alias and user-group strategy.

  Objective is that the anyconnect user must select group-alias, so that when a user enters his username and password he must go to his political group and tunnel-group specific. as I removed this command in webvpn 'no tunnel-group-list don't enable '. This I can not connect (user does not authenticate).

  1 - my question is why his past does not?

  Solution:

  If I keep only a single tunnel-group by default and make several group policies and assign to each user with his specific group policy that it works. in user attribute means I have only question following the commands it works, but if I put "group-lock value test-tunnel" that it did not identify.

  Please explain why.

  WebVPN

  allow outside

  limit the cache-fs 50

  SVC disk0:/anyconnect-win-3.0.10055-k9.pkg 1 image

  enable SVC

  internal strategy of group test-gp

  attributes of the strategy of group test-gp

  VPN-tunnel-Protocol svc webvpn

  the address value test-pool pools

  username, password test test

  username test attributes

  VPN-tunnel-Protocol svc

  group-lock value test-tunnel

  Strategy Group-VPN-test-gp

  tunnel-group test-tunnel type remote access

  attributes global-tunnel-group test-tunnel

  Group Policy - by default-test-gp

  tunnel-group test-tunnel webvpn-attributes

  allow group-url https://192.168.168.2/test

  Yes, you have the right solution. You only need to create 1 group of tunnel and multiple group policy. Under the attribute of the user, you re then group policy of vpn that you want the user assigned too.

  You can also authenticate users against AD and configure ldap attribute map to map the user to a specific group policy automatically.

  Here is an example of configuration if you happen to have the AD and will authenticate against AD:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808d1a7c.shtml

  Hope that helps.

• Added properties (Group and channel) are not a numeric data type.

  I use a use to add two groups and channel custom properties. The properties are text and digital, double and whole.

  When I create a request in the browser, I selects the custom using the drop-down list property, but has only the drop operator "=" or "<>". "" The property is displayed in the data portal is a number of float. I had this problem when I was adding properties custom by using a script. I then tried "Navigatorinstallation / my Index DataFinder/Reset/Reset", then repopulated my search box, using the use on my raw data files. At this point, all the properties of my have only the "=" or "<>" choice of operator in the query.

  It seems that my properties are digital in the data portal, but the the query string of the browser.

  Thanks in advance,

  Hi Bill,

  You don't have to delete the files.  Choose the NAVIGATOR menu "settings > My DataFinder > reset... '. "can clilck on the UPPER part of the two buttons, one called"reset the index.  Which will remove all records in database and re-index all of your data files.  If you one of these properties have already optimized, set their State not optimized before resetting the index, otherwise the optimized property data types will persist.

  If this does not help, then the problem could be in the use that you use.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Several open BBM BBM groups and message being deleted

  Hello all: I've recently updated my BB Bold 9900 at a new classic. I made the switch of the device and my three BBM groups transferred nicely. After a week of use, no problem.

  Recently, in the last 7 days, I noticed my self-suppression cats when I have more than one group of ongoing discussion.

  Then, with two or more BBM group discussion going, I will get a notification in the HUB that someone sent a message. I can see the preview in the HUB. I touch the notification in the HUB, and it opens the BBM "app." As soon as it opens I see quickly the cat disappear, as well as any history behind it.

  If I get a notification and I go to the BBM app directly, sometimes the cat is there and sometimes the cat is deleted. I put the story for all the conversations of "forever".

  EDIT: Don't know if this helps, but some of the participants in the group the cats are on iPhone and/or device Samsung Galaxy.

  Has anyone else had this happen to them and if so, is there a solution?

  Thank you

  G.

  Make another person in the Group and the administrator and then it prompts you to come back and make you an administrator once they invite you to come back. Everything will remove and then Resync.

• Trunk group and hunt inter-classes CUCM

  Hello

  I think I have some notion about what I have to do to get what I want to do, but it's always a good idea to get your expert advise to validate my plan.

  I have two clusters of CUCM 10.5 standalone. We have VPN connectivity between these sites. Site A has a group with call of broadcast distribution. If nobody takes the call, he goes to voicemail. Now my management wants to add an extension of Site B in this group of hunting, there will be a distribution more call coverage or load. My thought is to create ICT between the two groups and add the extension of site B in the hunting group. Is there another better way? Do I have to create a trunk of ICT? I need to make sure that the call goes to voicemail if no one picks up the call. Thank you for your help on this.

  ~ Khanal

  No, when you go to the Group of curves, you will notice the only things that you can add is a real number of directory. If the requirement is ring let simultaneously or circular between local cluster DN then build a ling group for it and then the backup is another cluster DN, DN build with single number reach destination pointing to the other cluster and then build the second group of line with this unique name. In your list of hunting point to two groups of line.

• VPN (remote access, ASA5520) with 2 clients, one with Internet and other without Internet

  Hello! I make a VPN with two clients, using the ASA5520 United Nations. Now I have to do what the customer has internet and the other does not. I can do using ACL? How?

  The configuration is:

  interface GigabitEthernet0/0

  nameif outside

  security-level 0

  IP 172.16.31.252 255.255.255.248

  interface GigabitEthernet0/1

  nameif inside

  security-level 100

  IP 172.16.1.237 255.255.255.240

  Access extensive list ip 172.16.1.224 ACLnonat allow 255.255.255.240 host 172.16.1.230

  Standard access list Split_tunnel allow 172.16.1.224 255.255.255.240

  IP local pool testpool 172.16.1.230 - 172.16.1.232 mask 255.255.255.240

  NAT (inside) 0-list of access ACLnonat

  Route outside 0.0.0.0 0.0.0.0 172.16.31.254 1

  Crypto ipsec transform-set esp-3des esp-md5-hmac hw_trans

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto dynamic-map dyn_map 1 transform-set hw_trans

  Crypto dynamic-map dyn_map 1 the value reverse-road

  stat_map 10000 card crypto ipsec-isakmp dynamic dyn_map

  stat_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 3600

  Crypto isakmp nat-traversal 30

  internal hw_policy group policy

  attributes of the strategy of group hw_policy

  value of server DNS 193.205.160.3

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list Split_tunnel

  Split-dns value 193.205.160.3

  username User1 encrypted password privilege 0 pqA3EDHB1cfLxwWn

  password username User2 FIQ1c02tX8lU1wHJ encrypted privilege 0

  attributes of user User2 name

  VPN-framed-ip-address 172.16.1.233 255.255.255.240

  allow password-storage

  type tunnel-group hwclients remote access

  tunnel-group hwclients General-attributes

  address testpool pool

  Group Policy - by default-hw_policy

  hwclients group of tunnel ipsec-attributes

  pre-shared key *.

  ISAKMP retry threshold 30 keepalive 5

  Thanks in advance.

  Hello Jose,.

  I see that you use LOCAL authentication, what you can do is, you can create another political group and link this political group for the user name, example:

  attributes of group PALLET policy

  Split-tunnel-policy tunnelall

  name of User1 user attributes

  RANGE of VPN-group-policy

  The other username will use hw_policy, since it is the default value for the tunnel-group hwclients.

  HTH

  AMatahen

• How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  Hello

  I want to give as open & export to the level of permissions.

  How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  For example, if the group permissions, inturn should reflect on the users.

  Please help me.

  Thanks in advance,

  A.Kavya.

  Your question is quite broad and fuzzy then I suggest the security catalog presentation to read documentation: http://docs.oracle.com/middleware/1221/biee/BIESC/mgrgrpsusers.htm#CIHIBJGD

  And I think that you mix you two things which are managed in different places:

  ) an object as read access permissions, write, delete... which control you through the object "Permissions" dialog box

  

  

  (b) functional privileges controlled through "Manage privileges" under "Administration".

  

• I have windows 8 and my husband has win8. Can we post appts etc and then be able to view the calendar of each and others without it going throug mail?

  I have windows 8 and my husband has win8. Can we post appts etc and then be able to view the calendar of each and others without it going throug mail? If I post an apt for one or two of us on the calendar, it is possible for him to see and vice versa?

  Hi Candy,

  Thanks for the reply.

  Yes, of course, there is a way to put the appointment both of your calendars. When you use the same account Microsoft to connect both computers, the changes made in the calendar by a user is looking at another user's calendar. So, if your husband books calendar for an opportunity, then you will be able to see it.

  Feel free to get back to us any time for other issues related to Windows.

• How to set up users, groups, and security role in WebCenter E-capture 11.1.1.8.0

  Hello

  I need to set the security of user group and the role of E-Capture but not no matter what doc and I configured 5 reviews in web logical console with the administrator group, but faced with a problem that is mentioned below

  Problem:

  (1) in the E-capture show only user weblogic and I'm not able to search for any user.

  (2) not yet able to connect to e-capture console and client using another user except weblogic.

  Please guide me how to set security for e-capture console and customer e-capture.

  Thanks in advance

  Sanjeev

  Hello

  Connect to Enterprisemanger-> right click on the domain-> titles-> roles and policies

  Then select capture and navigate to capture roles add LDAP users and groups to roles according to your requirement to capture. If faced with any LDAP related issues can create the user with the admin role and try to add it all first by assigning the two roles out there. Hoping that this will certainly help.

• unexpected results of the Group and the merger of processor

  Hi team,

  I use a processor of group and the merger in a process that includes "Store-num" and the "Cust-num" and mergers based on the most common value.

  I have few records store-Num = 42 and a few records store-num = 426. But for the same "Cust-num" for these two stores, store-num ' 426' we replace "42"

  My point is that these documents should not have grouped at all.

  No idea why this happen?

  Kind regards

  Ravi

  Yes, that's correct. Dates will be converted to a string representation of the date.

• Grouping and clipping masks

  I just created a merry-go-round.  I create each animal separately and then combining them.  By far the most complex animal is the Zebra.  I created the strips by drawing lines that go outside the Zebra adjusing using the widths and - thanks to the wonderful of the forum, created a form of Zebra clipping mask.  Very well.  Now I would like al to group items so I can treat the Zebra as one object among others.  First of all, I'm doing the clipping mask group and scratches.  All well and good so far.

  

  But then, when I bring together all the elements, the effect of cut goes, and the stripes extend beyond the Zebra.  I see that the clipping mask is always there, but the effect of the clipping mask disappeared.

  

  Not very good.

  (Note: the same thing happens if I I do not first a group of the clipping mask and the scratches .)

  Frustrated (72 years) old-dog fearing that it becomes too too old to learn all the new stuff.

  There are two types of clipping masks. Object, it automatically creates a group. The second is a mask of base layer. This is not a group, but rather of all the objects on a given layer clips.

  That the second is the type that you created. But it cannot be contained within another group.

  What you need to do is create a based clipping mask object instead (don't worry, you can use the same objects that you already own. You must use the command object > clipping mask > make instead of the button in the layer panel.

• Need help in the optimization of the query with the Group and joins by clause

  I'm having the problem by running the following query... It takes a lot of time. To simplify, I added the two tables FILE_STATUS = stores the file load details and COMM table Board table job showing records treated successfully and which was communicated to the other system real. Records with status = T is trasnmitted to another system and traansactions with P is waiting.

  CREATE TABLE FILE_STATUS
  (FILE_ID VARCHAR2(14),
  FILE_NAME VARCHAR2(20),
  CARR_CD VARCHAR2(5),
  TOT_REC NUMBER,
  TOT_SUCC NUMBER);
  
  CREATE TABLE COMM
  (SRC_FILE_ID VARCHAR2(14),
  REC_ID NUMBER,
  STATUS CHAR(1));
  
  INSERT INTO FILE_STATUS VALUES ('12345678', 'CM_LIBM.TXT', 'LIBM', 5, 4);
  INSERT INTO FILE_STATUS VALUES ('12345679', 'CM_HIPNT.TXT', 'HIPNT', 4, 0);
  
  INSERT INTO COMM VALUES ('12345678', 1, 'T');
  INSERT INTO COMM VALUES ('12345678', 3, 'T');
  INSERT INTO COMM VALUES ('12345678', 4, 'P');
  INSERT INTO COMM VALUES ('12345678', 5, 'P');
  COMMIT;

  Here's the query I wrote to give me the details of the file that has been loaded into the system. He reads the table of State and the commission files to display the name of the file, total records loaded, total at the table of the commission and the number of records which has finally been passed successfully loaded (Status = T) with other systems.
  

  SELECT 
      FS.CARR_CD 
      ,FS.FILE_NAME 
      ,FS.FILE_ID
      ,FS.TOT_REC
      ,FS.TOT_SUCC
      ,NVL(C.TOT_TRANS, 0) TOT_TRANS
  FROM FILE_STATUS FS
  LEFT JOIN
  (
      SELECT SRC_FILE_ID, COUNT(*) TOT_TRANS
      FROM COMM
      WHERE STATUS = 'T'
      GROUP BY SRC_FILE_ID
  ) C ON C.SRC_FILE_ID = FS.FILE_ID
  WHERE FILE_ID = '12345678';

  In production, this request has several joins and takes a long time to deal with... the main culprit for me is the join on the COMM table to count the number of number of transactions sent. Please can you give me tips to optimize this query to get results faster? What I need to delete the Group and use the partition or something else. Help, please!

  Don't know if it will be faster based on the information provided, but analytical functions offer an alternative approach;

  select carr_cd, file_name, file_id, tot_rec, tot_succ, tot_trans
    from (select fs.carr_cd,
                 fs.file_name,
                 fs.file_id,
                 fs.tot_rec,
                 fs.tot_succ,
                 count(case
                          when c.status = 'T' then
                           1
                          else
                           null
                        end) over(partition by c.src_file_id) tot_trans,
                 row_number() over(partition by c.src_file_id order by null) rn
            from file_status fs
            left join comm c
              on c.src_file_id = fs.file_id
           where file_id = '12345678')
   where rn = 1;
  
  CARR_CD FILE_NAME            FILE_ID           TOT_REC   TOT_SUCC  TOT_TRANS
  ------- -------------------- -------------- ---------- ---------- ----------
  LIBM    CM_LIBM.TXT          12345678                5          4          2