Group Smart talk offline
Hi all!
I want to know if I can use me y SBT when I havn't my smartphone?
Sorry for the bad English.
In french:
Hello world!
Let me explain my problem:
After days of research pour find a bracelet that is connected...
I found the one don't I have needs, the Sony smartband sw30 talk.
But before I buy it I would like to know if it is possible to use it without the connector permanently with a smartphone?
Situation of my:
I have a 7 2013 5.0.2 Android nexus slot and an IPod touch 4G jailbreak in 6.1.6.
Waiting to acquire a plug-in my iPod touch smartphone pour go underway the talk smartband SOR is not compatible iOS.
So you could I synchronize my bracelet only in the morning and in the evening.
That's so everything will be back my question above!
If you need more info ask me!
Thanks in advance!
Roman.
It is an option in lifelog, which lets you record on the smartband when you don't have the device.
Tags: Sony Smart
Similar Questions
-
Why paste smart (for DITA) is disabled?
I just started working with FM 11. I would try the new ability to convert Word documents to DITA, but I can't.
If I understand correctly, you copy the part of a Word document (or an HTML document) to the Clipboard. In the framework, you place the cursor over an element in a DITA, concept, task, or reference section and then in the context menu, select "paste smart."
I tried this multiple ways, but the item "Smart paste" in the menu is always disabled.
I installed DITA-FMx - could this be the cause?
AJ...
I just uploaded an update file "structapps stub" dita-fmx-users files area to stick to the Yahoo Group smart for the purposes of DITA-FMx default theme. If you are a member of this group, you can download this file and give it a whirl. If you are not a member of the group... you should join. :-)
See you soon,.
.. .Scott
-
I'm about to define and organize a list of contacts-sized companies.
I want to TAB contacts so that they appear in different types of categories (say by provider type), but I would also (perhaps) personal contacts in a single address book business contacts and in a different address book.
is there such a feature and if so can someone point me in the right direction? Perhaps there is an existing TAB/word KEY feature in the contacts, and I just haven't used?
Thank you
You can configure groups of Contacts. Go to the view menu and select Show groups (or command + 1).
Go to the file menu and select new group and a new group of "Untitled" will show under list groups, you can then type a name of your choice.
Then in your list of contacts, select the contacts you want and make slide them on the name of the group.
Another method is to create smart groups (file > new Smart group) which allow you to define various settings in which contacts which correspond to them become a part of this intelligent group. See the article by MacNN, pointers: groups and groups smart in OS X Contacts.
HTH
-
My games download why? game store is what I use
When I try to down load my games, that they will not. I downloaded many games before.it don't download it keeps running.
It is a help for Firefox for Android area.
If you are having problems using Google game store from your phone then your mobile service provider is the group to talk to him.
-
Cause many ATA exceptions in syslog, looking for SD6SF1M128G1022I
I bought one of these drives promising to have as a boot drive for my NAS omv.
Unfortunately I get quite a few exceptions ATA in the system log:
Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363285] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363328] ata1.01: BMDMA stat 0x64 Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363350] ata1.01: failed command: READ DMA EXT Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363379] ata1.01: cmd 25/00:00:a0:3e:44/00:02:0a:00:00/f0 tag 0 dma 262144 in Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363379] res 51/84:7f:21:3f:44/84:01:0a:00:00/f0 Emask 0x10 (ATA bus error) Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363456] ata1.01: status: { DRDY ERR } Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363478] ata1.01: error: { ICRC ABRT } Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363519] ata1: soft resetting link Aug 10 16:26:53 msa-nas1 kernel: [ 1455.547847] ata1.00: configured for UDMA/33 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.556895] ata1.01: configured for UDMA/33 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.556915] ata1: EH complete Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595322] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595375] ata1.01: BMDMA stat 0x64 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595401] ata1.01: failed command: READ DMA EXT Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595438] ata1.01: cmd 25/00:00:a8:4e:44/00:02:0a:00:00/f0 tag 0 dma 262144 in Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595438] res 51/84:8f:19:4f:44/84:01:0a:00:00/f0 Emask 0x10 (ATA bus error) Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595529] ata1.01: status: { DRDY ERR } Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595556] ata1.01: error: { ICRC ABRT } Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595603] ata1: soft resetting link Aug 10 16:26:53 msa-nas1 kernel: [ 1455.783876] ata1.00: configured for UDMA/33 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.792925] ata1.01: configured for UDMA/33 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.792945] ata1: EH complete
A check with chip gave me this
root@msa-nas1:~# sudo smartctl -a /dev/sdf smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.16.0-0.bpo.4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Marvell based SanDisk SSDs Device Model: SanDisk SD6SF1M128G1022I Serial Number: 144211400493 LU WWN Device Id: 5 001b44 c9f40532d Firmware Version: X231200 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Mon Aug 10 17:10:00 2015 HKT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 9 Power_On_Hours 0x0032 253 100 --- Old_age Always - 740 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 32 166 Min_W/E_Cycle 0x0032 100 100 --- Old_age Always - 0 167 Min_Bad_Block/Die 0x0032 100 100 --- Old_age Always - 29 168 Maximum_Erase_Cycle 0x0032 100 100 --- Old_age Always - 7 169 Total_Bad_Block 0x0032 100 100 --- Old_age Always - 209 171 Program_Fail_Count 0x0032 100 100 --- Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 --- Old_age Always - 0 173 Avg_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 0 174 Unexpect_Power_Loss_Ct 0x0032 100 100 --- Old_age Always - 10 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 194 Temperature_Celsius 0x0022 061 050 --- Old_age Always - 39 (Min/Max 25/50) 212 SATA_PHY_Error 0x0032 100 100 --- Old_age Always - 426 230 Perc_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 0 232 Perc_Avail_Resrvd_Space 0x0033 100 100 004 Pre-fail Always - 100 233 Total_NAND_Writes_GiB 0x0032 100 100 --- Old_age Always - 58 241 Total_Writes_GiB 0x0030 253 253 --- Old_age Offline - 25 242 Total_Reads_GiB 0x0030 253 253 --- Old_age Offline - 9 243 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 715 - # 2 Extended offline Completed without error 00% 691 - # 3 Extended offline Completed without error 00% 667 - # 4 Extended offline Completed without error 00% 644 - # 5 Extended offline Completed without error 00% 621 - # 6 Extended offline Interrupted (host reset) 00% 618 - # 7 Conveyance offline Completed without error 00% 0 - # 8 Conveyance offline Completed without error 00% 0 - # 9 Conveyance offline Completed without error 00% 0 - #10 Extended offline Completed without error 00% 409 - #11 Short offline Aborted by host 00% 409 - Device does not support Selective Self Tests/Logging
Any idea what goes wrong, why the SSD is causing all these exceptions in the system log?
The SMART info actually say quite a bit about a few errors have occurred, smartctl-x:
Device does not support Selective Self Tests/Logging Warning: device does not support SCT Commands SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 54 Command failed due to ICRC error 0x0002 4 76 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 8 Device-to-host register FISes sent due to a COMRESET
Thanks for any help!
Well, I solved the problem... Finally. http://UNIX.StackExchange.com/a/225781/41400
In case anyone else ends up with this... But I can't recommend get this model by car when they are intended for use with Debian...
-
I receive many notices of delivery failure in my hotmail
I get notifications of delivery failure on the old emails for months or years there are groups. Talking to people and they really delivered, some prescriptions of placement for Penthouse, etc.. Why? How can I stop it?
Your hotmail account seems to have been hijacked or hacked.
You must discuss this with your email provider or ISP - you can't fix it yourself (although at the same time, change your password would be a good step). They are the ones who can access these things on your account and close it because it may be the only viable option (although I'm not sure they can stop emails being sent to your name, even if the account is closed because the source is probably not the ISP or e-mail provider but an unknown location abroad). But do not notify them immediately in order to take appropriate measures (and don't forget to discuss how you will have access to your files if they close your account - you will need to keep it open long enough to move the information elsewhere). To support hotmail, go to:http://emailsupport.spaces.live.com/ and follow the instructions to report a hacked account. You can also get support information at the:http://support.microsoft.com/kb/316659.
. You must also report it to the authorities (the police) so they can try to track down those criminals who cause damage even more before all is said and done.
You can also report it to the internet crime complaint center if necessary
http://www.ic3.gov/complaint/default.aspx
Here's a suggestion on what to do next:http://www.microsoft.com/athome/security/bank/PhishingVictim.mspx
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
is the power line Networking is a good idea to build werkgroep netwerk with windows 7
Hello
1-is the power netwerk line is safer than wifi or it has also some drawbacks.
2-can we replace cables in small business with power line newterk adapters or it is not a good idea.
3 can be power supply adaters also suspect to sniff.
Thank you
Johan
"Broadband PLC" was the provision of access to internet via incoming food, not something that was very common or successful.
Your proposal is entirely internal is so different, for example, they refer to it "are on the same range" as ADSL. HomePlug PowerLAN solutions do not have something like this beach as it is designed to work with a main inner ring.
Yes, the technology is much improved and the standards are now closely identified. Most units also offer an encrypted mode that allows only of these units in a group sure talking to each other.
-
On ASA 5505 VPN cannot access remote (LAN)
I have an ASA 5505 upward and running, all static NAT statements I need to forward ports to the internal services such as smtp, desktop remotely and it works very well, however I have set up an IPSEC vpn connection that authenticates to our DC and part works. However, after I connect and cannot ping anything on the local network or access services. I don't know what a NAT statement I have corrected. Here is the config. I really need to get this up and going tomorrow. Thanks for any help.
Tyler
Just remove the line of nat (outside) and ACL outside_nat0_outbound.
And talk about these statements:
IPSec-1 sysopt connection permit... (If it is disabled, you can check with sh run sysopt).
2, crypto isakmp nat traversal 10 or 20
3 no NAT ACL, mention your local subnets as the source and vpn client as the destination.
4, create the other ACL (ST) with different name and source and destination like no nat ACL.
5, then type nat (inside) 0 access-list sheep
6, in the dwgavpn group policy, talk to splittunnel tunnelspecified and mention the tunnel split ACL (ST).
Concerning
-
Message from blackBerry Smartphones I get after you set up e-mail. Help please
What should I do to remedy this?
Dear customer of AT & T Yahoo!:
We noticed that you access using mail not secure electronic settings in your email program.
We want to make sure that your AT & T Yahoo! Member ID, password, and e-mail messages are transmitted securely between your e-mail (such as Outlook or Outlook Express) software and servers AT & T Yahoo! Mail. To meet this need, please enable SSL via the instructions available on the support Web site.
As several mail notifications have already been sent to this topic, we ask that you Please make the necessary changes immediately. Don't forget, you need to make these changes, if you want to continue to send and receive e-mail using an e-mail client.
Thank you for your cooperation,
The at & T Yahoo! customer support
What email address this message comes, you can chk mail from yahoo or BB to find the senders e-mail address.
also chk this thread: http://groups.google.com/group/alt.usenet.offline-reader.forte-agent/browse_thread/thread/2084bb2287...
-
I need a PKI authentication at the Application level
We are in 11g; APEX 4.2
Thank you
There is but I don't think this is an appropriate forum to address this issue, if you want to talk offline we can, but I would refrain from talking more about it in this open forum...
Thank you
Tony Miller
Software LuvMuffin
Ruckersville, WILL -
After I have updated to the latest version of reflow all my text converted to nonsense (example: my button 'ABOUT' now reads as "CDQWV".) It reads still about on the value of the key, but real button reads as described. Someone has a solution for this, or the cause?
Hi swvictor!
We have not a way generate 1 main CSS file for all pages. I am curious about your workflow! Happy to talk offline to [email protected] you want to know how we can help!
-
Facing a problem while RAC configuration on my virtual machine
Hi all
While configuration RAC 10 g on VMWare with Cent OS 4, I came across a few issues that have been resolved by rebooting (last resort)
The problem is after the installation of the database by checking the cluster resources using crs_stat - t, the State shows off line for 2 resources.
The + ASM1 instance and listening on the RAC1 began not when I checked. So I started the manually.[oracle@rac1 bin]$ ./crs_stat -t Name Type Target State Host ------------------------------------------------------------ ora....SM1.asm application ONLINE OFFLINE rac1 ora....C1.lsnr application ONLINE OFFLINE rac1 ora.rac1.gsd application ONLINE ONLINE rac1 ora.rac1.ons application ONLINE ONLINE rac1 ora.rac1.vip application ONLINE ONLINE rac1 ora....SM2.asm application ONLINE ONLINE rac2 ora....C2.lsnr application ONLINE ONLINE rac2 ora.rac2.gsd application ONLINE ONLINE rac2 ora.rac2.ons application ONLINE ONLINE rac2 ora.rac2.vip application ONLINE ONLINE rac2
But when the instance is started, I got an error
I was unable to disassemble and reassemble the drive. It gave an error sayingWARNING: cache failed to read fn=3 indblk=0 from disk(s): 2 ORA-15196: invalid ASM block header [kfc.c:7910] [endian_kfbh] [3] [2147483648] [0 != 1] NOTE: a corrupted block was dumped to the trace file System State dumped to trace file /u01/app/oracle/admin/+ASM/bdump/+asm1_lgwr_12518.trc NOTE: cache initiating offline of disk 2 group 1 WARNING: offlining disk 2.3912953495 (DATA_0002) with mask 0x3 NOTE: PST update: grp = 1, dsk = 2, mode = 0x6 Wed Sep 12 22:43:44 2012 ERROR: too many offline disks in PST (grp 1) Wed Sep 12 22:43:44 2012 NOTE: PST not enabling heartbeating (grp 1): group dismounted
Firstly can someone tell me what "ora". SM1.asm' and «ora...» C1. LSNR"there? Why the TARGET column was also showing online?ORA-15130: diskgroup "DISK" is being dismounted
I also tried to close resources, then by restarting the services rawdevice. But after that, while trying to start (resources from crsctl) the order was simply hanging on both instances.
I then didn't know what to do and just restarted both machines and then saw that everything was in place. I managed to create the database and everything works fine now.
I didn't know where else to find errors. Can someone help me understand the question please?
Now after setting up, I see the error in the newspaper of the ASM alerts for both nodes below.
I checked the support of oracle DOC ID 1054033.1 and tried to check permissions. But I do not see the file asmadmin in $ORACLE_HOME/binErrors in file /u01/app/oracle/admin/+ASM/bdump/+asm1_rbal_9071.trc: ORA-15183: ASMLIB initialization error [/opt/oracle/extapi/32/asm/orcl/1/libasm.so] ORA-15183: ASMLIB initialization error [driver/agent not installed]
The support doc
Thank youSolution 1. Manually change the oracle binary ownership and permission: as root user: # cd $ORACLE_HOME/bin # chgrp asmadmin oracle # chmod 6751 oracle # ls -l oracle
Abhishek.I'll find a virtual solution taken in charge for this and put in place on that :)
I'll close this thread for now
-
Does anyone have a full working example of Jquery autocomplete with json that works?
I can't get any of the examples I found online at work.
The thread here http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:64866 underway is really saying the same thing you and I are, to know that the data are not in the proper format (as you know). That thread made reference to this article: http://www.petefreitag.com/item/720.cfm. The attack "/ /" on the front of these data shows that ensure JSON is activated. This ' / / ' prefix should be removed from the data. Can you put this in your code to disable safe JSON and then see what response you get?
-
Momentary entities in the planning
Our users requirements are to allow a group defined by the user of the projects (entities). For example, a user has access to 50 different projects but would like to group 5 to use on a master forecast form (looking at the actual spending of the last year, this year and next forecast). They would have several groups; Group 1, group 2, etc. These groups would be strictly defined by the user and they change when they want (if a cumulative dimensional entered administrator is not possible).
I thought I was doing something with a smart list, but can't figure out how it would work. The Group (smart list) would be at the TOP level and therefore you can not show total dollars (account) at the level of the line or column.
Has anyone go through this type of request before? Any way to manage planning?Hello
An easy solution that I could think of is to use user variables. However, you should limit the number of groups and projects within a group a number.
Say that the limit for number of projects within a group is 10 (maybe more) and the limit for number of groups is 10 (maybe more) in ths case the variables that you create are:
Group1Project1
Group1Project2
Group1Project3
...
Group1Project10
Group2 Project1
...
Group10Project10
You can now duplicate the shape for each investment group of every 10 of these variables to the section of the page. Users can update these variables to create and modify their own groups.See you soon,.
Alp -
Cannot start Coldfusion 9 Application Server Service
Note that this is a Dev server. Not vital, but super boring. I found that my machine has been restarted due to Lumension. It's normal. However, given that I imported a file .because the old CF8 server directly to this Dev CF9 Server I had not restarted or restared the CF9 service.
I found these error messages in the event viewer:
The ColdFusion 9 application server service could not be started. Check the log files from the server 'coldfusion' for more information.
and
The ColdFusion 9 application server service stopped with the error special service that the system cannot find the specified file...
I checked the JRUN logs and can not find all the papers relating to correspondence timestamp of today or anything out of place, which seems to be the cause. Nothing in the CF be newspapers, mainly because CF never rose from the status running if no newspaper could be generated.
I thought I found the culprit in this post http://www.houseoffusion.com/groups/cf-talk/thread.cfm/ThreadId:61223 ... but the fix is without effect. I can't find anything in my search using grep outside the JRUN temp folder a single .xml file with a path of Coldfusion8 not valid. The path of attachment or remove the offending temporary files does not solve the problem.
I also tried to move all files from the root that was moved in the directory / / ColdFusion9/wwwwroot/out and you try to start the service, but the same error and failure occurs.
I have not tried to reinstall. I installed the CF9.0.1 update and it work just dandy wait this restart. There are no other experienced computer problems that I can tell, and no other errors were found in the event viewer.
Thank you! I now have an error that I can hunt and diagnose if all goes well.
"Error: no known VMs." (Check for corrupted jvm.cfg file) "has been exposed error.
With a little big of the Goog I'm done with a solution of another CF user experience the same joy: http://forums.adobe.com/thread/795168
Found the problem because I suspected an incorrect path. It's the java.home variable that was incorrect. Java.Home =
: / ColdFusion9/execution/jre, I changed to java.home=C:/ColdFusion9/runtime/jre and he has pulled up very well. Solved!
Maybe you are looking for
-
To version download link Android of the Aurora is offline, page not found
I am trying to download firefox-aurora to my android, but the file is not available. I get page not found... I couldn't find a place where I could report it correctly, so I post here...
-
Boot Camp x 64 is not taken care of on this computer model
Hi all I need help to install Windows 7 on my imac I have listed all the specs here: 24 "iMac - early 2009 - Intel Core 2 duo E8135 - 8 GB - running El Capitan I have several versions of windows can I install: XP Pro, Vista (somewhere), version of 32
-
Re: Laptop model not found
[This | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=102277#102277] is what happened to me. So, I contacted the ASP in the Netherlands and the people he said that they could not fill my request because my Toshiba Satellite
-
recovery disc will work with the new hard drive
I have a HP Pavilion dm4. My hard drive died so I installed a new hard drive. The original operating system installed on the computer is Windows 7. I don't have a Windows 7 disc with the computer. If I order the Windows 7 HP recovery disk, it will in
-
From what I've read, it seems that there is no compatibility between the fonts on the 2009 icon editor and the Publisher of old icons. Am I wrong in thinking that all newly created screws can't have the same aspect of icon as old screws imported into