Group VPN using names
I would use DNS names in the name of the group, but cannot, someone there a way to use a DNS name in the group name in the tunnels on an ASA L2L.
Thank you for your help
Sent by Cisco Support technique iPhone App
Resolve IP address via dns to a static way of an identity IPsec configured FQDN name should be no problem.
I never did exactly that, in this case, I used a quick and dirty "ip host" entry up to a 'name' on the SAA, I have more confidence in the config as in an axternal dns server.
For your dynamically addressed 2811 s you will very certainly "Eazy VPN remote."
Rgds, MiKa
Tags: Cisco Security
Similar Questions
-
Contact - removal of the entire group and its name.
In Vista, I can delete individual members of a group, but how to remove the group bearing his name. Tried all I know. Help! Thanks adavance if you can spare the time to calm down a user of profanity.
It is clear. That's also what I thought that you said in your original post. If I gave you this...
Assuming you are using Windows Mail...
Open Windows Mail > toolbar, click Contacts > highlight the group in question, right click > delete see screenshot for illustration:
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
ASA 5520 - VPN using LDAP access control
I'm setting up an ASA 5520 for VPN access. Authorization & authentication using an LDAP server. I have successfully configured tunnel, and I can access internal resources. What I want to do now is to limit access to a specific ad group membership. In the absence of this belonging to a group, a user cannot access the VPN.
My VPN client software testing is Cisco Systems VPN Client 5.0.05.0290 Version. The Group authentication is configured in a connection entry that identifies the Group of Tunnel. I think I wrote that correctly.
The Version of the software on the SAA is 8.3 (1).
My current challenge is getting the VPN to stop letting each request for access through little matter belonging to a group. I found the thread below to be significantly useful, but there is obviously something which is not entirely mesh with my situation.
https://supportforums.Cisco.com/message/3232649#3232649
Thanking all in advance for everything offered thoughts and advice.
Configuration (AAA LDAP, group policy and group of tunnel) is below.
AAA-Server LDAP protocol ldap
AAA-Server LDAP (inside) host x.x.y.12
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
microsoft server type
LDAP-attribute-map LDAP_MAP
AAA-Server LDAP (inside) host x.x.y.10
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
LDAP-attribute-map LDAP_MAP
AAA-Server LDAP (inside) host x.x.y.11
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
microsoft server type
LDAP-attribute-map LDAP_MAPAAA-Server LDAP (inside) host x.x.y.10
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
LDAP-attribute-map LDAP_MAP
AAA-Server LDAP (inside) host x.x.y.11
Server-port 636
LDAP-base-dn dc = domain, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn cn = svcacct, or = svcac, or = users, or = svcad, dc = domain, dc = com
enable LDAP over ssl
microsoft server type
LDAP-attribute-map LDAP_MAP
!
internal group NOACCESS strategy
NOACCESS group policy attributes
VPN - concurrent connections 0
Protocol-tunnel-VPN IPSec webvpn
address pools no
attributes of Group Policy DfltGrpPolicy
VPN - 10 concurrent connections
Protocol-tunnel-VPN IPSec webvpn
enable IPSec-udp
vpn group policy - pro internal
vpn - pro group policy attributes
value x.x.y.17 x.x.y.27 WINS server
Server DNS value x.x.y.19 x.x.y.29
VPN - 50 simultaneous connections
Protocol-tunnel-VPN IPSec svc
group-lock value vpn - pro
field default value domain.com
value of address ip-vpn-pro pools
WebVPN
client of dpd-interval SVC no
dpd-interval SVC 1800 bridge
!attributes global-tunnel-group DefaultRAGroup
LDAP authentication group-server
LDAP authorization-server-group
Group Policy - by default-vpn-pro
authorization required
type group tunnel vpn - pro remote access
attributes global-tunnel-group-vpn - pro
LDAP authentication group-server
Group-server-authentication (LDAP outside)
LDAP authorization-server-group
Group Policy - by default-vpn-pro
band-Kingdom
password-management
band-band
authorization required
type tunnel-group NOACCESSGROUP remote access
attributes global-tunnel-group NOACCESSGROUP
LDAP authentication group-server
NOACCESS by default-group-policyHello
The configuration of what you are looking for is a feature called DAP (Dynamic Access Policy)
The following link will explain how to set up the same.
http://www.ciscosystems.com/en/us/products/ps6120/products_white_paper09186a00809fcf38.shtml
I hope this helps.
Kind regards
Anisha
P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.
-
Could not find 'Use name tags Transparent' façade in Tools - Options - façade - LabVIEW 2010
I studied a style guide which suggested the 'Transparent use name labels' marketing front panel options. I can't find this setting in Tools - Options - front panel. This SETTING disappear or moved somewhere else in LabVIEW 2010?
You must add it.
noBoxAroundName = True
-
Get 810 error message when you try to connect to the VPN using L2TP protocol
Original title: L2TP will not let me connect.
I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests). All are not updated, but the PPTP, IKEv2 work without problem. The second server that has the CAs and RRAS is a member of the AD - DC server. The Win7 is not on the domain and I have Win7 a client certificate. I have ensured that the CA root of trust is in the user store and computer Trusted Root CA. I have also ensured that the Win7 client certificate is in the user store and personal computer. I get a 810 error message when I try to connect to the VPN using the L2TP protocol. I have exhaustively studied this problem and I can't find a solution to this problem. I also raise the functional level of the domain to 2K8R2.
I think this should be a simple and easy solution, but where can I find the answer?Please help me.Thank you for your time.Allan.Hi Allan,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:
http://social.technet.Microsoft.com/forums/en/category/w7itpro
If you need any other assistance, let know us and we would be happy to help you.
-
Is if possible to group files by name and display for each letter instead of "A - H"?
Is if possible to group files by name and display for each letter instead of "A - H"?
Hello
I don't think that there is a way to group all the numbers/letters individually.
Grouping like this would appear likely several empty sections, since not all files will have file names that begin with all 26 letters.
There are several ways that you can view the files by name, for example, list, details, category, etc.
Concerning
-
name of group/prot-vmhost name / vlan id /Swicth
Get-vmhost xxx | Get-VirtualPortGroup more or less gives me what I need
But I'm looking for format like this
name of group/prot-vmhost name / vlan id /Swicth
I need this o/p to have include VMhost name 1st column & also run for all the vmhost in a cluster. Can someone do this
It is a way to do
Get-VMHost-xxx name | Get-VirtualPortGroup |
Select-Object - property @{N = "HostName"; E = {Get-VMhost-Id $_.} VMhostid | {{Select - ExpandProperty name}}.
@{N = "PortgroupName"; E={$_. Name}}, VLanId, VirtualSwitchName
-
SSL VPN using core instead of configured Group group
I have a 3000 configured for Ipsec using ACS to authenticate users. I tried to add SSL VPN. I can authenticate and install the SSL client, but I can't access anything whatsoever. I am connected via the base group, explains the newspaper on the 3000. How can I get SSL to work via the group which I configured and not the core group?
You should be able to achieve this with your RADIUS server. You must set the class attribute 25 as an ORGANIZATIONAL unit name equal on behalf of the particular group you want to connect to on the hub.
For example, suppose you want a SVC_User user to connect to a group called SSL_VPN. In the configuration of the RADIUS user, you would (under the attribute 25):
UO = SSL_VPN;
(... Do not omit the semicolon.)
-
SSL VPN using ASA 5520 mode cluster - several problems
I configured 2 ASA 5520 s in the load balancing cluster mode. I connect using anyconnect and I download the customer the first time and everything works well except outlook. I don't know why outlook does not work.
The second problem is after the anyconnect client is installed on your machine, he remembers that ASA (say ASA2) he first connected and the GUI shows the address IP of ASA2 instead of the virtual IP address of the cluster. I want users always connect using the virtual IP address.
The third problem I have is there is a default group of SSL VPN and I want all users to use this group. In the initial web page, there is a drop down menu which shows that this group, but I still want to disable this menu drop-down.
Any suggestions?
To disable the drop-down menu, you can turn it off with the command
WebVPN
no activation of tunnel-group-list
This will take care of your last issue.
***************************
You can create a profile of the Anyconnect client with the name of the server you want to connect with and that make the ASA that will solve your problem of virtual IP.
**************************
Regarding Outlook, do you use specific ports which allows inspection of the ASA. Take a look at the list of inspection on the SAA and perhaps try to disable inspection and see if it works.
*****************************
-
ASA checks AnyConnect VPN computer name
Hi all
I have searched the Forum and documentation, but have not found a solution to my problem. I'm guessing it happens sometimes, but maybe I'm looking for the wrong thing. We AnyConnect deployed across our cell phones, but have trouble with employees who do get the software from other sources AnyConnect and install on personal computers. We are an agency, although relatively small, but we have policies in place and I need to lock for users unable to connect to the VPN unless you're a book PC connected to our AD domain. I found a possible solution is to use dynamic access within the ASA policies to check the Windows computer name. So I set up LDAP and has created a policy to check an AAA attribute. It lets me select "MemberOf", which I assume it is the Group of users, but I need to check the name of the computer on the client before allowing access.
Step by step of what I did, does anyone know of a more logical or easier way to lock on what AnyConnect VPN client computers can be used?
Or if I go about this common sense with dynamic access policies, anyone have any suggestions or knowledge of documentation that helps to configure things properly when you check the computer name LDAP attribute?
Thank you!
JD
Hey Joe,
You do not need LDAP to do this, what you need is CSD (Cisco Secure Desktop) combined with DAP.
Once you enable SSC, edit your DAP strategy and instead of an IPN to attribute you to try, add an attribute of endpoint (on the right hand side).
To verify the host name, select the type of the attribute "peripheral".
Alternatively, you can also activate the sweep of host (under Contract) and let the CSD to check the presence of a file with a certain file name, or a registry entry or a process name. CSD passes the result of this verification to the PAD, so you can use it in a policy (attributes of endpoint of type process, registry and files).
Another alternative is to use the CSD with a policy before opening session - that you cannot check the host name, but it does not have control over the IP, OS type, certificate as well as the presence of a process, the registry key, the file. In this case you need not to DAP.
HTH
Herbert
-
PIX to PIX VPN using Ipsec Tunnel. Need help please.
Hello everyone,
I have a connection of two sites using 506th PIX and PIX 501. The one on the central site (WATBCINX1 - 506th PIX) sends the packet correctly and one on the remote site (CTXPOINX1 - PIX 501) receives (checked using icmp backtrace on the two PIX). The problem is that PIX 501 at remote site return packages. I have to say that the two PIX hace a 3com OfficeConnect ADSL router as gateway Internet 812. If someone could help me I would appreciate it a lot. Thank you!
PIX 506th Configuration (central site):
WATBCINX1 # sh conf
: Saved
: Written by enable_15 to the CEDT 08:36:50.090 Friday, June 20, 2003
6.2 (2) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate qU51Wrx8ggFHLusK encrypted password
qU51Wrx8ggFHLusK encrypted passwd
hostname WATBCINX1
NEOKEM domain name. LAN
clock timezone THATS 1
clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
no names
name 80.37.246.195 POLINYÀ
access-list outside_access_in allow accord any host 10.0.0.10
outside_access_in list access permit tcp any host 10.0.0.10 eq 1723
outside_access_in list access permit tcp any host 10.0.0.10 eq smtp
outside_access_in list access permit tcp any host 10.0.0.10 eq pop3
access-list outside_access_in allow icmp a whole
inside_access_in ip access list allow a whole
access-list inside_access_in allow a tcp
access-list inside_access_in allow icmp a whole
Allow Access-list inside_access_in a whole udp
access-list 101 permit ip 192.168.0.0 255.255.255.0 192.168.11.0 255.255.255.0
pager lines 24
opening of session
interface ethernet0 10full
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
outdoor IP 10.0.0.3 255.0.0.0
IP address inside 192.168.0.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 192.168.0.100 255.255.255.255 inside
location of PDM 192.168.0.0 255.255.0.0 inside
location of PDM 192.168.0.128 255.255.255.255 inside
location of PDM 192.168.0.135 255.255.255.255 inside
location of PDM 192.168.11.0 255.255.255.0 outside
location of PDM 192.168.11.0 255.255.255.0 inside
location of PDM 80.37.246.195 255.255.255.255 outside
location of PDM 192.168.0.254 255.255.255.255 outside
PDM 100 debug logging
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
(Inside) NAT 0-list of access 101
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside, outside) 10.0.0.10 192.168.0.100 netmask 255.255.255.255 0 0
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 10.0.0.2 1
Timeout xlate 0:05:00
Conn Timeout 0:00:00 half closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0: 05:00 sip 0:30:00
sip_media 0:02:00
Timeout, uauth 0:00:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
authenticate the NTP
NTP server 192.43.244.18 source outdoors
NTP server 128.118.25.3 prefer external source
Enable http server
http 192.168.0.100 255.255.255.255 inside
http 192.168.0.128 255.255.255.255 inside
http 192.168.0.135 255.255.255.255 inside
http 192.168.11.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set esp - esp-md5-hmac COMUN_BCN
Polinyà 1 ipsec-isakmp crypto map
correspondence address 1 card crypto Polinyà 101
card crypto Polinyà 1 set peer 80.37.246.195
card crypto Polinyà 1 the transform-set COMUN_BCN value
interface to crypto map outdoors Polinyà
ISAKMP allows outside
ISAKMP key * address 80.37.246.195 netmask 255.255.255.255
ISAKMP identity address
part of pre authentication ISAKMP policy 1
of ISAKMP policy 1 encryption
ISAKMP policy 1 md5 hash
1 1 ISAKMP policy group
ISAKMP policy 1 lifetime 1000
Telnet 192.168.0.128 255.255.255.255 inside
Telnet 192.168.0.135 255.255.255.255 inside
Telnet 192.168.11.0 255.255.255.0 inside
Telnet timeout 10
SSH timeout 5
username password QSECOFR privilege ELFfg8t/K5UMO89z encrypted 15
Terminal width 80
Cryptochecksum:74cd0cf16ef2c35804dffaeee924efdf
WATBCINX1 #.
PIX 501 Setup (remote site):
CTXPOINX1 # sh conf
: Saved
: Written by enable_15 to the CEDT 09:27:14.439 Friday, June 20, 2003
6.2 (2) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate qU51Wrx8ggFHLusK encrypted password
qU51Wrx8ggFHLusK encrypted passwd
hostname CTXPOINX1
NEOKEM domain name. LAN
clock timezone THATS 1
clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
no names
name 80.32.132.188 BCN
access-list inside_access_in allow a tcp
Allow Access-list inside_access_in a whole udp
access-list inside_access_in allow icmp a whole
inside_access_in ip access list allow a whole
access-list outside_access_in allow icmp a whole
access-list 101 permit ip 192.168.11.0 255.255.255.0 192.168.0.0 255.255.255.0
pager lines 24
opening of session
interface ethernet0 10baset
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
IP 10.0.0.1 address outside 255.0.0.0
IP address inside 192.168.11.2 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 192.168.0.0 255.255.0.0 inside
location of PDM 192.168.11.0 255.255.255.255 inside
PDM 100 debug logging
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
(Inside) NAT 0-list of access 101
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 10.0.0.2 1
Timeout xlate 0:05:00
Conn Timeout 0:00:00 half closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0: 05:00 sip 0:30:00
sip_media 0:02:00
Timeout, uauth 0:00:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
authenticate the NTP
NTP server 192.5.41.209 prefer external source
Enable http server
HTTP 80.32.132.188 255.255.255.255 outside
http 192.168.0.0 255.255.0.0 inside
http 192.168.11.0 255.255.255.255 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set esp - esp-md5-hmac COMUN
BCN 1 ipsec-isakmp crypto map
card crypto bcn 1 set peer 80.32.132.188
card crypto bcn 1 the transform-set COMMON value
bcn outside crypto map interface
ISAKMP allows outside
ISAKMP key * address 80.32.132.188 netmask 255.255.255.255
ISAKMP identity address
part of pre authentication ISAKMP policy 1
of ISAKMP policy 1 encryption
ISAKMP policy 1 md5 hash
1 1 ISAKMP policy group
ISAKMP policy 1 lifetime 1000
Telnet 80.32.132.188 255.255.255.255 outside
Telnet 192.168.0.0 255.255.0.0 inside
Telnet timeout 10
SSH timeout 5
username password QSECOFR privilege ELFfg8t/K5UMO89z encrypted 15
Terminal width 80
Cryptochecksum:dc8d08655d07886b74d867228e84f70f
CTXPOINX1 #.
Hello
You left out of your config VPN 501 correspondence address... put this in...
correspondence address 1 card crypto bcn 101
Hope that helps...
-
VPN using hotspot with ios 10 does not
I often work off site and use my iPhone AT & T s 6 to attach my work Windows 10 Pro (processor ASUS T300CHI) Tablet. Although many places I work have Wifi, most only allow VPN I need to connect to my work server. After updating ios 10 (I'm on 10.0.1), I did have problems engaging, but VPN doesn't work anymore.
VPN integrated Windows 10 Pro on my Tablet has an automatic configuration that appears to detect the type of configuration (IKEv2/IPSec/PPTP/L2TP, etc.) and you just put in user name and password. According to my dept IT, the VPN connection in the office not only supports PPTP (I understand has been disabled with ios 10) but also supports IKEv2 and L2TP/IPSec. Nevertheless, I always left configuration VPN on Windows 10 in auto. I tried selecting the connection type, but it did not work either. Generally I get the error "failure of VPN tunnels.
Any thoughts would be appreciated
MattyBH,
Please keep us informed if you were able to solve this problem. I also have the same problem since the update iOS10. I think it has to do with Apple, removing the IOS10 PPTP protocol... I was able to confirm the conclusion of downgrading to previous IOS 9.3 and my VPN works very well, unfortunately my users with iPHONE7 cannot sink their IOS and now can not access VPN through hotspots iOS10
-
How to get all the stage within a group or sequence names?
Hello
I want to show all the steps within a sequence or group names.
I wonder if there is a simple function that can be used directly, for example RunState.PreviousStep.Name.
I tried via a stupid way to add the name of each stage, if it shows all the stage names, but I still think that there is a simple function can access all the stage names.
Can anyone give me any suggestions, thanks a lot!
I fiddled a little towards the top of your sequence. But yes, you have a loop.
Also, what format you want names?
Hope this helps,
-
Connect to the router VPN using PPTP (Ubuntu)
Hello
As I mentioned in other post, I try to get the VPN works for my Ubuntu workstation. I'm not an expert of VPN, so I need help.
So far, people seem to agree that pptp is easier to config that IPSec (under Linux platform). Select the PPTP Protocol and add a user account for the Linksys router.
Now, the Linux part.
I have pptp-linux installation (it is the best client for linux pptp seams). I try to set it up, but I missed something relatd to coding or something.
I try to follow this documentation: https://help.ubuntu.com/community/VPNClient#PPTP
When I run this command: pon myvpn nodetach
I get the following error:
Using interface ppp0
Connect: ppp0 <-->/dev/pts/2
MPPE required, but not executed [v2] MS-CHAP authentication.
Connection down.Here is the log of the router:
15 Oct 21:51:02 2008 Client Remote System Log [] disconnect PPTP server.
Kind regards
Hello
Thanks for your help and this useful link.
I have change my configuration file and I managed to set up the pptp connection.
Here the configuration file that I use (for people with the same problem):
RemoteName until-vpn
LinkName until-vpn
ipparam entmd-vpn
Pty "pptp exemple.dyndns.org - nolaunchpppd.
name budderball
usepeerdns
require mppe
garbage-eap
/noauth
file /etc/ppp/options.pptpAlso, I change the contents of/etc/ppp/chap-secrets:
Budderball until vpn-based *.
With this configuration, I can launch the tunnel and communicate with the gateway and LAN.
Here the command line I use to establish the connection and than create road so that any request for 192.168.1.0/24 use the ppp0 interface.
sudo pon entmd-cpn debug dump logfd 2 nodetach
sudo route add - net 192.168.1.0 netmask 255.255.255.0 dev ppp0
Finally, by reading the documentation, I found a plugin for Network Manager. It's a work like a charm.
For ubuntu: sudo apt - get install network-manager-pptp
An installation, you must restart to 'activate' the plugin. (this is a bug)
You can use the network - manager to configure your pptp connection. I intend to post a wikiw on the Ubuntu Wiki page.
--> -
Has features missing from Windows XP in Windows 7?
I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.
In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard. It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately. I imported thousands of photos in this way.
This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them? It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?
To illustrate this point, let's look at my current situation. I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture. Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name. It has been easy. This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name. Want to see pictures of St. Peter's Basilica? If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010» Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.
This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP. It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).
So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7? I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.
Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!
Has features missing from Windows XP in Windows 7?
I'm doing a simple import of photos using the option 'Import pictures and videos using Windows' native Autoplay.
In Windows XP, I could choose what images to import and give them all the basic name custom during the import process, with each photo added later with a "001", "002" etc using the scanner and Camera Wizard. It is very convenient because it could have been hundreds of photos on some of my cards from a long period of shots, I could run the tool more than once for different groups of photos that I would choose Import, and the pictures would be get named sequentially and stored in their files you want immediately. I imported thousands of photos in this way.
This new tool for Windows 7 allows me to add tags to all of the photos on the cards and devices and name photos after their date, or on the label, or other combinations of that... but why doesn't this new tool in Windows 7 suppose I want to import every single photo on the card device / I just connect and more that I want them all to have the same tag assigned to them? It's stupid and useless - there, makes only has pictures of a theme on their card at any time that they connect to import their photos and always wants to import everything each time?
To illustrate this point, let's look at my current situation. I'm just on vacation in Europe and took pictures to more than one place, I visited, of course and now I would like to mark photos with the location of the names individually... or even more, I would like to actually name photos when importing with the name of the place in the picture. Scanner and digital camera Assistant & would do that, no problem - you just had to run the tool once for each different group name, then select the appropriate images to import with the same group name. It has been easy. This type of naming is far superior to the addition of tags to images named simple-list or date-wise because you can tell what the image file in your library that you want to open just by going to (or get) the group name. Want to see pictures of St. Peter's Basilica? If you named the photos with that (added with 001, 002 etc), then simply browse to that name in your folder of photos «The Italy, holiday 2010» Without trying to find photos Tags into the sea by the name of "IMG20100324005" - soup and no program Photo Gallery Windows Live Photos or necessary Picasa.
This new program in Windows 7 for the import of images does not appear to be able to handle the very handy feature of its predecessor Windows XP. It's very frustrating to have opted for the version of Windows newer and supposed to be 'better' but find several programs that have been very useful for XP have valuable features removed or are no longer present at all (like how Windows 7 is no longer a Clipboard Viewer - that has great idea that is?).
So is it possible to recover the image import feature I apparently lost by 'redevelopment' of Windows Windows 7? I could of course go and buy an image import and edition program (Smart Photo Import very nice for the price, a quick search I just do), but as this feature was native in Windows XP it is still stupid to have to buy a 3rd party simply program now because Microsoft does not understand the idea of keeping popular features in their software and seems rather "he dumb down.
Any help to select the pictures I want to import and naming them when importing with a custom group name using the import wizard would be greatly appreciated... + 10 GB of photos and videos of this trip is sitting & waiting for a solution!
===========================================
Perhaps the following links will propose a few ideas:Windows 7 - change settings for importing pictures and videos
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
(don't forget to extend "Import in the view settings" at the bottom of the page)Windows 7 - How to make photos from my camera to my computer?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-pictures-from-my-camera-to-my-computerYou might find the free Picasa software or Windows Live Photo Gallery
to be useful:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Download Windows live Photo Gallery
http://explore.live.com/Windows-Live-Photo-Gallery
(There are other applications included in the download...
Uncheck the ones you don't want)Picasa
http://Picasa.Google.com/Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
Maybe you are looking for
-
How do you remove drop guests for user id fields?
When you fill in the user id field thinking I had tabulated field password but had not typed the password in the user id field after my user id. It seems now every connection for all to see!
-
Satellite M70: How to get the Express Media Player feature?
I M70, but I formatted it once I bought it. Now, you could tell me how to recover the function of Express Media Player? There is no setup.exe file in the Express Media Player recovery CD. Thank you
-
What is the difference of the photos on my Mac and iPhoto
I have pictures in iPhoto AND Mac pictures, in the Finder. I am not clear in my question but, when iPhone ask you what images to be imported, the whole group is important to the images. Very confused how to transfer photos from my Iphone5s to my Ma
-
Model BDP-S360 can be upgraded with the new firmware to play 3D?
-
How to change the default color for the text label
Hello friend I have a question, Z10 Simulator has the default theme of the white background & Q10 thoroughly black theme, if I put a white background of the page, & txt for the label by default color is black on Z10 is good, but the same page on Simu