GroupWise admin uac authorization

C:\Program Files\Novell\GroupWise\grpwise.exe ask to permission to UAC now.

Icon has blue and yellow shield.

I chose fo the executable to run as administrator.

I found the answer.

C:\Program Files\Novell\GroupWise\grpwise.exe

Do a right click, properties, compatibility, change the setting to all users.

Disable running as an administrator.

I know it's against intuitive, but it fixed the problem.

Tags: Windows

Similar Questions

  • Why not working IE and Windows Explorer on a new Admin UAC

    I created a new user account with Admin power.  Originally, I have 2.  The news gives account me the message "the Internet security settings prevented one or more files being opened," I went back to MY id and changed C: and D: to share.  I also changed Windows, Program Data, Program Files, program (x 86) shared.   I had no idea if sharing C: and D: would extend to all the folders/files below them.

    When I go to the center of control/Internet Options / Security I only refer to the computer and NOT the normal inputs.

    I've set up a new user account with Admin power...

    You have a Restore Point available that predates the creation of the new user account, and if so, the behavior persists it in one of the two user accounts 2 original after you restore the computer to the time?

    TIP-online you would be much better to post in the forum security, privacy & accounts - or, where appropriate, the forum of repair & recovery.

  • With Windows 7 online game lag s for 1 min every 15-20 minutes. Help, please!

    Just downloaded Battle of the Immortals free MMORPG and every 15-20 minutes I have a lag of 1 min where the game slows to an almost unplayable State. First I thought that maybe my internet has strangled so I called my ISP. They ran a few test and said that everything was running at 100%... So next time, I contact the support team technique video games... They had run me a dxdiag and a program to hack... I also ran a tracer on my connection just to show them this is not not my internet... Then, they responded and said "it could be Windows, Windows Firewall, Admin, UAC, network or anti-virus settings you need to change so that they are not blocking or limiting the game." I tried everything until I even contacted them... I watched my CPU usage and prosesses and nothing no longer uses the CPU than normal usage... I have no virus and I just bought this processor so there may not be a hardware malfunction about 2 months... More 5 other online games I play run very well... I also tried setting the game as high priority in windows Task Manager... That which seemed to work for about 6 hours but now my windows task manager keeps reseting back to normal priority. I downloaded a program called Prio which is suppose to set a permanent priority... Well, this program has not completely... I also tried to run the program with the resolution of the problems of compatibility and as an administrator... Without success... I have also all the drivers for all... I have triple checked the drivers... Help, please!

    MY CPU Specs:

    AMD Athlon (TM) II X 4 820 2.80

    RAM: 8,00

    64-bit operating system

    Graphics card: Nvidia Geforce 9100

    1 Terrabyte HARD drive

    Well I think I got myself the solution...  I discovered that the game made my jump 20 c cpu temp... So when my CPU hits 50 - 54 c temp the game hits a pic gal... Currently, I have on my open cpu and a fan blowing on the one side and I had 3 hours of spike no lag... It was difficult to find a limit temp CPU specific before you start to make mistakes, but what I found said it was about 50 to 60 c Temp...

  • IOS router with several groups of VPN

    Similar to a discussion, I read with a PIX firewall, I need to set up multiple VPN groups on IOS-based router to support different levels of security. For example, a VPN "GUESTS" group would only have access to 1 server, while the VPN "ADMIN" group would have access to the entire network.

    With a PIX firewall, you can simply specify additional group names (for example "group1 vpngroup',"vpngroup group2"and so on). However, I have not been able to find how do with IOS-based router (Cisco 831 12.3 (4) T) running.

    For example, I have these dynamic groups of VPN:

    the crypto isakmp client configuration group of GUESTS

    password1 keys

    DNS 10.1.1.1

    swimming POOL1-IP pool

    Configuration group customer crypto isakmp ADMIN

    key password2

    DNS 10.1.1.1

    POOL2-IP pool

    ! - Users get authenticated to a RADIUS server

    list of card crypto CRYPTOMAP customer VPN-USER authentication

    ! - The problem is that line taken out. "I can only specify an allow list (a group name) for this encryption card!)

    card crypto CRYPTOMAP ADMIN isakmp authorization list

    I did research on this site, Google, usenet and ORC and have not found what I'm looking for. Any ideas?

    Thank you.

    Command 'isakmp authorization list' you do it reference does not refer to the VPN group, it refers to a whitelist of AAA name which States that the groups are configured locally. Change to the following:

    AAA authorization groupauthor LAN

    card crypto isakmp authorization list groupauthor CRYPTOMAP

    The "groupauthor" is just a label that matches the encryption to the aaa command. Your clients VPN will be accompanied to a specific group depends on what group name, they set up in their VPN client.

    See http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080095106.shtml for details, it's a HW 3002 client to a router but the router config is exactly the same thing.

  • ESXi 5.1 AD join domain issues

    People,


    I need some clarification regarding ESXi 5.1 AD following domain join:

    Location of the object Active Directory computer ESXi

    Where expected or can we place the computer object of ESXi? can move in another custom ORGANIZATIONAL unit can I created myself? as: domain.com/DC1/Production/ESXi servers

    Location of the object group security Active Directory ESXi

    What about the group Admins of ESX? should I put / create in my universal security group of both custom location? as: domain.com/Users/It Admin/Dept/ESX Admins

    Authorization to VCenter

    Do I need to do anything on the tab authorization VCenter to replace the role of Administrator security group assignment existing? because at this time I created the custom security group as a Director for the vShere environment as well as the authorization of some blue folder to select a few people.


    Thanks in advance.

    On the first two questions, it's more an AD organization than anything else. IMHO, Hung specific UO is better that mix everything in one place, so your examples are good.

    The subject of the third, ESXi permissions have no relationship with vCenter permissions - they apply for direct access of ESXi, not reflecting not at all in the way vCenter accesses resources of ESXi.

  • UAC WILL NOT CHANGE THE ADMINISTRATOR, WILL NOT ACCEPT SECRET ADMIN, RESTORE THE SYSTEM, SFC OR MSCONFIG

    • Recently, I tried to delete a program and received the error that I need to log on as an administrator. Original set up was for single user.  UAC icon a panel show me as a standard user. By clicking on select account type by selecting administrator, and change account type brings back me to the screen of type change original account with my screen showing always name standard user. UAC is disabled message when the system is restarted.
    • Trying to set up or access the secret or using the admin account emergency create a new account, administrator naming TEST or any name alpha returns error "the specified account name is not valid. Cannot contain the following characters / \ ><+=>
    ?:;...   Any character for a standard or administrator account, or alpha name valid returns this error.
  • SFC or back command MSCONFIG error solutions' you have not privleges, sufficient to run this utility or 'you must be an administrator running in the console session' for access...
  • Programs, tools, the system restore System Restore returns error "you have been refused permission...". "RSTRUI.exe BACK returns"error unexpected-class not registered Ox800040154.
  • Here is copy of my current version\policies\system of the registry
  • Key name: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\
  • Name of the class:
  • Last write time: 01/05/2010 - 14:30
  • A value of 0
  • Name: ConsentPromptBehaviorAdmin
  • Type: REG_DWORD
  • Data: 0x2
  • Value 1
  • Name: ConsentPromptBehaviorUser
  • Type: REG_DWORD
  • Data: 0x1
  • Value 2
  • Name: EnableInstallerDetection
  • Type: REG_DWORD
  • Data: 0x1
  • Value 3
  • Name: EnableLUA
  • Type: REG_DWORD
  • Data: 0
  • Value 4
  • Name: EnableSecureUIAPaths
  • Type: REG_DWORD
  • Data: 0x1
  • Value 5
  • Name: EnableVirtualization
  • Type: REG_DWORD
  • Data: 0x1
  • Value 6
  • Name: PromptOnSecureDesktop
  • Type: REG_DWORD
  • Data: 0x1
  • Value 7
  • Name: ValidateAdminCodeSignatures
  • Type: REG_DWORD
  • Data: 0
  • Value 8
  • Name: dontdisplaylastusername
  • Type: REG_DWORD
  • Data: 0
  • Value 9
  • Name: legalnoticecaption
  • Type: REG_SZ
  • Data:
  • Value 10
  • Name: legalnoticetext
  • Type: REG_SZ
  • Data:
  • Value 11
  • Name: scforceoption
  • Type: REG_DWORD
  • Data: 0
  • Value of 12
  • Name: shutdownwithoutlogon
  • Type: REG_DWORD
  • Data: 0x1
  • Value 13
  • Name: undockwithoutlogon
  • Type: REG_DWORD
  • Data: 0x1
  • Value 14
  • Name: FilterAdministratorToken
  • Type: REG_DWORD
  • Data: 0
  • Value 15
  • Name: EnableUIADesktopToggle
  • Type: REG_DWORD
  • Data: 0
  • Key name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\UIPI
  • Name of the class:
  • Last write time: 02/11/2006 - 11:28
  • Key name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\UIPI\Clipboard
  • Name of the class:
  • Last write time: 02/11/2006 - 11:28
  • Key name: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\UIPI\Clipboard\ExceptionFormats
  • Name of the class:
  • Last write time: 02/11/2006 - 11:29
  • A value of 0
  • Name: CF_TEXT
  • Type: REG_DWORD
  • Data: 0x1
  • Value 1
  • Name: CF_BITMAP
  • Type: REG_DWORD
  • Data: 0x2
  • Value 2
  • Name: CF_OEMTEXT
  • Type: REG_DWORD
  • Data: 0 x 7
  • Value 3
  • Name: CF_DIB
  • Type: REG_DWORD
  • Data: 0 x 8
  • Value 4
  • Name: CF_PALETTE
  • Type: REG_DWORD
  • Data: 0 x 9
  • Value 5
  • Name: CF_UNICODETEXT
  • Type: REG_DWORD
  • Data: 0xd
  • Value 6
  • Name: CF_DIBV5
  • Type: REG_DWORD
  • Data: 0 x 11

  • This who should I try next?

    Try the second link in the HAA procedure (the one in the post two above this).  That it does not require that you start the system, like the first.  You can work and if it can solve your problem without having to reinstall the system.  At least give it a try and then tell me if I am wrong and even the process cannot be done.

    I hope this helps.

    Good luck!

    ====================================================================================================================

    Xenypoo,

    Please ask your question in the Forums of Windows7 in the: http://social.answers.microsoft.com/Forums/en-US/category/windows7.  Your situation is different, and I don't want to mix the answers here with people wondering to which a response is addressed.  Thank you!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • that allows standard users change ppp settings, removing UAC admin fast pwd to DPIscaling.exe

    I am currently using windows vista ultimate 64-bit with an installed nvidia geforce 8800 gtx card. I'm the ADM on the machine, with the standards users who connect it. My account of adm does not have the problem. I'm trying to find a way to allow standard users on the machine to have the ability to change the ppp settings.

    The path of the file is C:\Windows\System32\DpiScaling.exe

    I tried to use the solution listed on this site: http://blogs.techrepublic.com.com/window-on-windows/?p=635

    and used the Application Compatibility Toolkit.  I used a lot of different options, the 32-bit version, 64-bit, different boxes, without success. When you click right on the file properties and click on the Compatibility tab, it says:
    Cannot be set on this program compatibility modes because it is part of the Windows version.

    I have a standard users also granted full control of the executable, and if the logged-on user account, he got always invited him to enter the administrator credentials. I understand that this only gives the user access to the file and not what the file does.

    I need to find a solution to allow standard users on the computer to change the DPI settings without the need of the admin password.  While looking for solutions here and on the site of regular microsoft (support.microsoft.com) support, all I could find are methods that disable the guests of UAC elevation and ways to disable UAC completely.    http://social.answers.Microsoft.com/forums/en-us/w7security/thread/0364515a-301e-47C5-AF99-39347b83c6b4-je don't want to do that.  I even tried and the standard user has always invited to enter an admin password.  I don't want to disable UAC or the guests of elevation, surprisingly these guests don't mind.   The computer is set to high resolution and need to continually change the DPI setting to enable the second monitor (my HDTV) text output in a format that is clear and correct.  The reason why we have change back is because the cursor of the mouse in the PC video games being played here on disappears when the DPI is set to what higher than normal / default. So before any game is played, the DPI settings in windows settings must be changed to the default / normal.

    Since I was the user only administrator on the machine, I am concerned when other users would like to play their games. but can not, because I am not present.  I want to be the only Admin account on the machine.  Bad things tend to happen when I allow other users are administrators on the machine.

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the security of Windows Vista on TechNet. Please ask your question in the TechNet forum.

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • The shield the UAC/Admin on programs icon disappears

    Hello

    a family to date win7 with security essentials, I got some big bugs with the shield icon.

    Several programs that require admin rights and had the shield on their icon, lose.

    There is no more direct running as admin window / login/pass. I need to ask to 'run as administrator '.

    Programs do not seem to have been changed, but I don't know where the need UAC was declared (internal manifest or other)

    I managed to find them with a restore point, but I would be grateful to know the real source of the problem and a real solution. any ideas?

    Thank you.

    I finally fixed that!

    Then, go on your administrator account. Open the command RUN by opening the start menu, then typing "Run". Press ENTER. You will see a dialog box with a place to type... Type: 'NETPLWIZ' (you can type all lowercase, I typed in uppercase so that you know the keys on which to base) and press ENTER.

    A window will appear with your user accounts. I bet you that under the section 'group', you will see at least one account with 2 groups assigned. What you need to do is click on that account to select it, then click on 'Properties'... click on the tab "Group membership" top of the window that you open, then select 'Other' for it the group... In the drop-down list next to 'Other', select 'Users' or 'Administrators', depending on what you want that matters have. Users is standard, and administrators for the user is a normal administrator account.

    Do this for all accounts that have more then 1 group!

    Then, after clicking on apply and OK for all windows, disconnect from all accounts... Now, you will be able to connect to your standard account and be able to run administrative programs!

  • Hidden an administrative user, now cannot type promt UAC admin password or login account

    Recently, I wanted to hide an administrator account to the logon screen. I used a standard method for creating in SpecialAccounts/UserList regedit a DWORD value with his user name and value of 0 to hide it. So I need to do some administrative actions, but UAC is not identifying information to type a password. As far as I know, double CTRL + ALT + DEL does more work at the logon screen. So, how to get back these changes?

    My goal was just to hide the administrative account from the logon screen.

    -> Hide an admin account is useless with respect to users who are familiar with these tips.
    The logic was simple: I just hide, not disabling account, I never even imagined it could stop working.
    -> This trick worked under Windows XP. It does not work under Windows 7. During the test of such things, we must ensure that there is a path of proven uninstall...
    The second point that I do not have is dissability enter random credentials by UAC promt.
    -> You must be logged in an admin account when responding to a challenge of UAC.
    Disabling the option double A + C + D. All this makes no sense to me and a total nonsense.
    ->, You should complain to Microsoft.
    Ask a question here I wanted to see if there are solutions to undo changes besides the option restore point.
    -> There are two options: System Restore (restore =) or an alternative admin account.
    Oh and btw, if it's off the only way is system reinstallation?
    -> There is a method to perform a manual registry restore. It expires after a few days.
  • How you rquire USERNAME and PASSWORD to type in UAC control featured instead of the list of admins, and then the password box?

    I have Windows 7 Professional and I'm Configuring UAC settings.  However, instead of users see the long list of admins and for more security, how can I do (like XP) users need to type in BOTH the admin user name and password?

    Hello

    Thank you for visiting the Microsoft answers community site.

    The question you have posted is related to the connection of users and would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

    I suggest you to ask your question on the TechNet Forums.

    http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

    I hope this helps.

  • UAC of Windows to type the Admin password but do me not not a place to go. Help.!

    You are prompted for an administrator password after trying to implement the parent controls.  My move to the standard administrator account. Now have two standard accounts and cannot repair. Invited by the UAC of Windows to type the Admin password but don't give me a place to enter.  My computer cannot even upward with out having to buy pass this fast.  Help.!

    It's because, apparently, there is no administrator account.
    If and only if, there is account admin on your system Windows will allow the built in (if not already enabled) administrator account if you start Sate mode.  Use the main administrator account to activate admin at least a user account.  Restore your admin account or create a new admin account.   You must keep at least one active admin account to manage your computer.  A supplement is even better.

  • ~/Applications without authorization of the Admin Setup, how?

    I just went through a program installation and the end of it, he asked my admin password that I do not give (I clicked Cancel), and yet it remains installed successfully to ~ / Applications.

    ~/Applications is locked in 'Read only' without an Admin password. How does it work? I'm guessing that if the system has the required permissions, it can install in ~ / Applications, which makes me wonder why he asked my password in the first place?

    Hello polarrrbear,

    Unless you have made specific changes to permissions on the folder, any user who is a member of the admin (default setting) group can write to the folder. There are some risks to it security. While it is just to have a file in / applications will trigger any execution, there are always a few things that malicious applications can use to fool you by throwing. Here is an example: https://blog.malwarebytes.com/threat-analysis/2016/08/pcvark-plays-dirty/

    I suggest you contact Apple directly on this subject through your comments: http://www.apple.com/feedback/

    or bug report: https://bugreport.apple.com/

  • Re: Vista UAC always request authorization to run Tempro times Satellite Boote

    I installed utility "Tempro" from Toshiba, which is very useful to talk about updates etc. TEMPRO is installed as one of my startup programs, and I'm happy to do.

    However, whenever I restart my computer, control Vista application user account permission to execute Tempro.
    This does not happen with all the other programs that I set to run at startup.

    It is an irritation, because when I turn on my computer, I would go until all startup routines have completed.
    But instead, I have to hang around waiting for the window UAC to appear and then tell him to go forward and then wait a little longer before I can use my computer.

    Can someone tell me how to configure so that user account control is not in the path?
    As I say, UAC doesn't interfere with any of my other startup programs, so I'm puzzled why he should get involved with Tempro.

    Hello

    You can turn off UAC using the msconfig.
    RUN-> msconfig
    Then click on the Tools tab scroll down until you find "disable UAC". Click on this line. Press the launch button.
    A CMD window opens and after a few seconds when the command has fished, you can close the window. Close MSCONFIG, and then restart the computer.

    All that s

  • How to move files between folders without having to turn off UAC (as admin)

    I am connected to my computer as an administrator (Windows Vista).  I take loads and loads of photos - when I edit that I need to move them between folders or subfolders.  If I have active user account control, the system tells me that I don't have permission to do so.   I had the same problem with Windows XP.  Please tell us how can I fix this.  I'm not invited to passwords.

    Hello

    Here are some easy ways to Take Ownership and Grant Full Admin Control

    Add 'Ownership' to the Menu Popup Explorer in Windows 7 or Vista
    http://www.howtogeek.com/HOWTO/Windows-Vista/add-take-ownership-to-Explorer-right-click-menu-in-Vista/

    How to add appropriate to the context Menu in Vista
    http://www.Vistax64.com/tutorials/112795-context-menu-take-ownership.html

    Take and Grant Full Control permissions and ownership in Windows 7 or Vista right click Menu
    http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-Windows-7-or-Vista-right-click-menu/

    --------------------------------------------------------------------------------------------

    How to take possession of an item in Vista
    http://www.Vistax64.com/tutorials/67717-take-ownership-file.html

    How to change the permissions on the folders
    http://www.Vistax64.com/tutorials/157304-folder-permissions.html

    ===================================================

    From a post by Rehman F.

    Here are the steps to change the ownership and permissions of files and folders:

    1. right click on the file or folder, click Properties, and then click the Security tab.

    2. click on advanced and then click the owner tab.

    3. click on edit and then do one of the following:

    ·    To change the owner to a user or group that is not listed, click other users and groups, and in the box type
    the object name to select (examples), type the name of the user or group, and then click OK.

    ·    To change the owner to a user or a group is listed in the change owner to box, click the new owner.

    4. If you want to take ownership of the contents of the folder, select the replace the owner of sub containers and objects check box.

    5. click OK and then click Yes when you receive the following message is displayed:

    You are not allowed to read the contents of directory folder name. You want to replace the directory
    permissions with permissions granting you full control?

    All permissions will be replaced if you click Yes.

    Note folder_name is the name of the folder you want to take charge.

    6. click on OK and then reapply the permissions and security settings that you want for the folder and its contents.

    Additional considerations

    7· An administrator can take ownership of any file on the computer.

    8· Affecting the ownership of a file or a folder might require that raise you your permissions using user access control

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Windows 7 authorization on the Admin Local account error

    We noticed a recurring problem with one of the administrator accounts on our image of Windows 7.

    The mistake was noticed first when an attempt to placement of files on storage devices detachable (a 4 TB external HD and a memory card).

    The next thing we saw is when you try to create a system image, we get the following - error

    "Cannot find backup devices.

    Access denied (0x80070005).

    I was able to restore the permissions to the admin user account to just close the account, sign in with another account administrator and reset the password.

    It's good to have this work around, I would like to be able to identify what caused this problem and how to prevent it.

    Hello

    Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

    Error code 0 x 80070005 while backup and updated to Windows Update appears due to a lack of permissions that are required to complete the process. This usually happens to the files or registry permissions modified due to malware or some registry files deleted during the installation or uninstalling programs.

    You may consult:

    http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

    https://support.Microsoft.com/en-us/KB/968003

    Hope this information helps.

    Let us know if you need help with the issue. We will be happy to help you.

Maybe you are looking for