Headless nonstop / permissions

Similar Questions

• two questions about apps headless

  Hi gang,.

  I have received the approval of _sys_headless_nostop (yay!) and started to refactor my app to be headless.

  I'm having a little difficulty and could use a couple pointers.  Two questions to begin:

  1.) once I receive permission, I have to do something special?  I updated my token, created a new certificate and generated new tokens of debugging, but when I look at the details for the debug token, I do not have permission to _sys_headless_nostop listed.

  2.) I found a few threads which implies that the only way to debug the part without the app is using instructions qDebug().  Looks like you can not attach a debugger or profiler.  is this true?  How are you supposed to make sure the party stays within the limits of resources imposed on applications without a head if you cannot debug, diagnose and profile headless?

  (3.) the page of stunts on apps without head said to remove the bar - descriptor.xml draft without a head, but some discussion in the forums show examples of how to set up the bar - descriptor.xml for the part without the app.  the headless part requires a bar - descriptor.xml or not?

  (ok, that's three questions!

  Thank you!

  J

  1. your permissions without head non-stop remains on BlackBerry Signing Server. When you export your app, IDE will contact Signing Server to sign your application.

  2. I can't use qDebug to debug, I connect my own debugging string in the HUB

  3. headless part has no need of bar - descriptor.xml, I guess it's useless there.

• Restricted permissions

  Hey,.

  I try to use a restricted in my application on a simulated device. When installation is request for permissions correctly, but I can't use the feature. Do I need the seller BBW has even to test the application on a simulated device? Because at this moment I am developing the app for me only and I do not have an account provider in any case. Authorization, I am using is read_phonecall_details, the app has been given the permission correctly to the simulated device, yet call.phoneNumber () returns an empty string.

  Thank you

  Daniel

  You must have permission to access_phone as well.

  However, this can be one of these permissions, you need to have an account for and must have requested access to.

  Did not use I don't know with certainty and documentation does not indicate as such, but for the long run headless documentation is poor in this respect. Thus

• Headless app - Release version

  Hi guys

  It's time I was here there is .

  I have a little problem. With app without a head. I create myself a project of default app model headless in Momentics IDE.

  Make changes, because I need the monitoring of calls. Everuything works if I run the IDE app, all functions, process headless, etc...

  But... If I create a BAR as a "Release Build" file and install it on the phone DON'T WORK.

  Process without head told me, which is started. If I also check the monitor process and device then there is, but nothing WORKS.

  You guys have some ideas where could be the problem why the app stop working in the Release version?

  THX

  Jesus, I'm real BFU 

  Problem solved. I have permissions for control of phone etc. within a request not to the Headless entrypoint process entry point. So I just moved them.

• What are 'File Permissions '?

  My beginner reading: http://macs.about.com/od/usingyourmac/qt/Fix-Spod-How-To-Fix-A-Spinning-Pinwheel --Death.htm says that file permissions are automatically repaired now with El Captain but that before that perhaps they should be "repaired" after updates or the spinning Rainbow wheel can appear.  I get the spinning wheel on entry just after put the password in and clicking on (but it's fast and not annoying) but worrying to see nonetheless.

  What are the file permissions?  Are they connected to the wheel that turns that I see at the time of the process, as it happens, or do I not to worry it is appearing briefly and then in endangered?

  Overwhelmed - please help with explanation so that I can learn more about my Mac.  Thank you for your time and your consideration.

  File permissions control which parts of the file system access is the best explanation I can find. They can cause a spinning beachball, but they are not the only thing that can cause that.

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Unable to repair the permissions of the library!

  Hello

  I'm pulling my hair out trying to restore access to my library of Photos...

  My photo library is located on a Synology NAS. After update macOS Sierra, I would lose permanently the connection to my NAS. Someone on another thread said to use SMB instead of the AFP for file transfer services. I did, and the connection has remained stable; However, since any attempt to open the pictures gives me an error message "repair permissions Library" and wrote "this library is locked or you don't have permissions to make changes. Photos can try to repair the permissions'.» I try to repair the library, and after about 20 minutes, I get "error repair permissions.

  Finally, I opened the console to see what was going on, and that's what I saw when the error occurred:

  Library Permission repair failed: error Domain = RKRepairLibraryPermissions Code = UserInfo '(null)' 3 = {NSUnderlyingError = 0x61800025ecf0 {error Code Domain = com.apple.library - repair.error = 4 "(null)"}}

  If anyone can decode this to give me a clue as to what is happening and how to fix it? Or is there any other suggestions?

  I would appreciate any info at all...

  See you soon,.

  Chris

  Vancouver, BC

  My photo library is located on a Synology NAS

  Photos is not compatible with the NAS volumes.  Photos libraries need to be located on an OS X Extended (journaled) formatted volume.

  So, copy the library on a volume formatted correctly and open it with Photos.  You may need to repair the library by launching it with the command and Option keys.

  

• whenever I try to, the open, Tunes, I have, get, message:, the file, "Ditties", is, on, to, locke d, drive, or you do not, write, permissions, for, this, file., Suggestions, to get on the past, this?

  whenever I, try to open it, Tunes, I have, get, the, message:, the folder, "Ditties", is, on, to, locke d, drive, or you do not, write, permissions, for, this, file., Suggestions, to get over the past, this??

  How about you post that again without commas and maybe then I'll read it?

• Reset home folder permissions and the default ACL on macOS Sierra?

  A tool that I've used in the past to troubleshooting doesn't seem to be available in macOS Sierra.

  There was a procedure in el captain to reset the permissions of file and ACLs in start in recovery mode, by running the command terminal, resetpassword.  This command pulls up a GUI in Sierra as el cap but the "reset the user permissions and ACLs" option is no longer there.

  This article describes the procedure to el captain

  http://appletoolbox.com/2016/07/fix-corrupt-user-accounts-MacOS/#For_El_Capitan _ andmacOS

  Is there another way to reset the permissions of the user and the default ACLs on macOS Sierra?

  If you are looking for in the forums on the topic and limit to messages by Linc Davis, he posted a script that will reset everything.

• The operation cannot be completed because you do not have the necessary permissions.

  The operation cannot be completed because you do not have the necessary permissions. This is the message I get when I want to create a new folder. I don't have this problem until recently. 1.

  How should I do?

  2 is that there is a security breach?

  I use sierra but, I had the same problem with el Capitan

  When you try to create a new folder? is it an external device? your office? a NAS?

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Help with account permissions / Yosemite

  Looking for help well informed with a pesky question of Yosemite...

  I have an old Mac with multiple disks, and I try to get the most recent versions of Mac OS X installed and working properly.

  The hardware and OS details:

  • Mac Pro 4.1 ("cheese grater")
  • 3 hard disks 1 to
  • Machine has been (and is still) 10.6.8 Snow Leopard as its main operating system running.  It's on HD #2.  That works very well, though obviously limited the age (old apps).  I need to keep this as a configuration to boot can be used - in other words, I need to preserve the ability to boot from the HD #2 in 10.6.8 as this is currently my workplace every day and will probably continue for a while.

  Last year, I installed 10.10.3 Yosemite on internal HD #1.  I initially had some difficulties to be able to switch between the boot disks, but am now able to choose with reliability drive/starting system at startup via the Startup Manager (boot, invoking the Boot Manager, I choose #2 with 10.6.8 HD or HD #1 with 10.10.3).)

  So far so good.

  Everything works well when it is started on the 10.6.8 by car.

  When it is started off the coast of the 10.10.3 drive, there is account/permissions issues that prevent me from using it for something meaningful.  That's what I'm trying to correct now.

  Note that I installed 10.10.3 on HD #1 for over a year and I've never used for anything - that the drive is empty other than the operating system.  If I need to blow this facility, I can do.

  The problem: I am currently not able to install apps on HD #1 (after starting on #1 with 10.10.3). HD  When I try to install anything, the operating system will appear an authentication dialog box: '< name of install App > wants to make changes. Type of administrator name and password to enable this. »

  I get my account name and PW (which I have always used for everything on this machine for ever), and it fails.

  Research in system preferences > users and groups, I see not what probably is the problem: my account is a "Standard user", not an administrator account.  There is no listed administrator account (in fact, no other users listed, other than the "Guest", which is disabled).  I don't know how he got in this State, I was always the administrator on this machine, and I guess it would have copied accounts and permissions of the 10.6.8 installation, or otherwise if he asked me about this information during the installation I took myself as an administrator.  In any case, my user account is now "Standard", which is probably the cause of the current unrest.  I am constantly invited to enter a log in admin whenever I try to do anything (a 'function' rather annoying but lets not go).  This machine is my home, nobody else is going to have physical access to it, no children in the House, that's for sure, I prefer to ignore as many log-ins required security etc. as possible, but for now, I just get my user configured as an administrator account.

  What is the best way to achieve this?

  As I said, I have nothing invested in the current installation of 10.10.3 HD # 1, this player is all-but-empty and I can blow that installation (and re - format the drive) if it's the easiest path.  But it is extremely important that I have the integrity of the other disk, HD #2, which is running 10.6.8 and has important data and apps on it.  I want to make sure that everything I do with or HD #1 and 10.10.3 is no impact on the #2 HD and my ability to boot from 10.6.8 on it.

  (I also have a third 1 TB internal disk (HD #3).  This player is 100% empty and unused.  After I get the permissions of the account/fixed on HD #1 with 10.10.3, I would then install 10.11 El Capitan on HD #3 - and have the ability to boot to one of the three systems - but I'll keep my questions on that until I have the 10.10.3 sorted issues.)

  Then... I guess the only real issue here that I need to address is the fact that my user account on #1 on 10.10.3 HD is not an admin (no?) account.  If this is the case, what is the best way for me to fix this?

  Thank you very much in advance for your help - it is much appreciated.

  Can you unlock the preferences system/users and groups? If so, you should be able to give administrator privileges. See if something in this article helps you. Since you have nothing else on the disc, if all else fails, delete and reinstall. Setup Wizard will allow you to create an admin account.

  User account - add new Admin

  Make a backup, best 2 separated on 2 discs. Start of recovery volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run the check/repair disk utility and repair permissions until you get no error.  Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Then re-install the operating system.

  OS X recovery

  OS X recovery (2)

• SSH permissions

  I know that this has been done, but I can't find here or elsewhere.

  I just reinstalled my SSH protocols after replacing a hard drive on the server and (data only) restore from a Time Machine backup. I seemed to have to start the SSH process from scratch.

  I'm from the procedure (which I learned here) ctlow.ca/SSH-VPN_MacOSX.html.

  It worked, but when I connect from the client, it just goes through without asking for password. I think that he asked a password the first time, the password private key (?), but he used to ask for it (in a small text box, echo) every time and then the password (?) server in the Terminal itself, not taken over.

  Now, none of those happening.

  So, I found some notes I had made about it and reset the permissions as 700 .ssh folder and files inside like 600, on the server and the client.

  It ends up looking like this:

  ClientComputer: ~ ClientID$ ls - ael .ssh

  Total 24

  drwx - 5 personal ClientID 170 11 Sep 15:24.

  drwxr-x-wx + 24 personal ClientID 816 13 Sep 08:26...

  0: Group: everyone deny delete

  -rw-@ 1 personal ClientID 32 10 February 2012 config

  -rw - 1 1766 11 Sep 15:11 id_rsa personal ClientID

  -rw - 1 818 11 Sep 15:33 known_hosts personal ClientID

  ====

  ServerComputer: ~ ServerID$ ls - ael .ssh

  Total 16

  drwx - 4 personal ServerID 136 11 Sep 15:28.

  drwxr-xr-x @ 25 personal ServerID 850 11 Sep 15:30...

  0: Group: everyone deny delete

  -rw - 1 416 11 Sep 15:28 authorized_keys personal ServerID

  -rw - 1 391 11 Sep 15:26 known_hosts personal ServerID

  I don't think I'm particularly threatened, but I was happy to have to use two passwords to log into the SSH tunnel. No idea why I wonder no password now? (I did specify a passphrase when generating the key.)

  Thank you.

  Charles

  P.S. The customer running 10.9, 10.11 server.

  P.P.S. For the client-user info window showed "shared folder" which I don't know how it got that way and have unchecked the box. I doubt if that is related to my question.

  Hello Charles,

  I'm not sure what you were doing before, but it seems OK now.

  Most of the internet uses the same set of instructions that tell people not to use a password for the private key. It's a hassle to the running ssh-agent and most people struggle enough as it is with ssh. But on OS X, keychain using ssh-agent. Thus, when you provide a password for your private key, the first time you go, you will be asked (via a beautiful Aqua GUI) your password. You can expect that and save it in the keychain, hence, you will never be asked again. Then, if the rest of your ssh stuff is correct, it will pass all by as you describe. It sounds like what is happening now, and that's how it should work.

  If I were to speculate, I think that maybe before you run a custom build of ssh and ssh-agent command line version. This would explain the double Terminal passwords can be made echo and the other not.

• Permissions problem

  Hello world

  I have a problem with permissions to write and read my hard drive on airport Time Capsule.

  I can't change the privilege, he tell me that: the operation cannot be performed because you don't have the required permissions.

  But I'm the only one using this time Capsule so I am the admin.

  What can I do to change the permissions?

  Thank you.

  The permissions are a lot more of a problem with El Capitan. You have a computer that still use older BONES?

  I recommend that you create the folder from the finder in El Capitan... then use the old computer to move the files to the new folder that you created.

  No luck so talk to me... but you cannot fix the permissions on the network drive on El Capo. And it's powerful fussy.

  I guess the only way then is to archive the files on USB... so you can plug the drive into your computer, access files, then copy backup.

• IMac locked out after changing the sharing and HD permissions

  Made a big mistake with my iMac internal sharing and permissions of HD.   I was experimenting with sharing and permissions of the HD info panel section in the administrator account.    In this article, I've changed the 'everyone' naming 'no access', but in doing so, it froze the machine.  Nothing did not.  I tried to restart, but after that the Apple logo and progress bar appears briefly, the screen went white.

  I tried to make a backup using Time Machine, but when the time came to clear the HD and replace it with the backup TM, I got an error message saying that the system could not erase the HD.  I tried to go into Safe Mode, but he continues to send me the recovery mode.

  I have a boot disc separate I made in Carbon Copy Cloner who is somewhere else right now but I can get, and maybe I can boot from that and do a total deletion of the internal HD and start again.  But I can do in the meantime?  It seems that a configuration option has locked me completely out of the HD to the iMac.

  Thank you

  Ed

  To keep track, I tried something different. I used the option to reinstall OS X when the pane of the utility is on the rise.  My iMac then crossed the download process and reinstall OS X.  After 40 minutes, when he was all done, my machine is back with the connection, settings, and data in place.  I didn't even do a time Machine reinstall data.  Problem fixed.

  Moral of the story is, don't play with fixed and permission of a lot!

• createinstallmedia permissions

  I'm doing an installation for el capitan disc. When I go to the Terminal, I get so far, but can't put my password, because the permissions are wrong - I just get a padlock logo. So what are the permissions do I need to change it please. It seems I only have access to Terminal, and I can't change the permissions on this point, because it is "the operation cannot be performed because you don't have the necessary authorization."

  So, how can I get the necessary permissions? Does anyone know?

  TIA

  If you typed the command createinstallmedia and are then asked a password, note that the characters that you type will not actually displayed in the Terminal window, even as a "•" s. Thus, when you type the command createinstallmedia and press return, enter your password even though you see only the padlock.