GSM - problem with Ext data tab model

Similar Questions

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• problems with the date picker

  I found some problems with the date picker to make my first presentation of object BPM.
  
  I created a group with a datetimestamp it contains. When I click on it in run mode, it will bring a new tab in the browser. This behavior is different from that of a date picker outside a group where there just a small javascript popup.
  
  Anyway around this problem?
  
  Also, would be nice if could be set by default to the current date. is there a way to who?
  
  For the component "time" it seems impossible to define the default value - at least on the tab object structure.
  
  Thank you

  Try to set the property "DHTML" to control date Yes. This option is under the Properties tab-> the calendar section. This will force it to use the popup javascript on screen instead of opening a new browser window/tab.

  To set a default value for a date/time, you can simply set the value in the constructor of the BPM object in which the property is located.

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• problem with the Favorites tab

  Hello, I have a problem with the Favorites tab in my browser. I took my computer to a computer shop earlier of him having served. They have changed something in My Favorites tab. The former Favorites tab no longer works properly, otherwise I don't know how to use it properly. A new is now open with a star next to it. This other does not upward with all my favorites. He keeps only upward with them on a daily basis. I would like to know how to get the old Favorites tab to work again. Your help is greatly appreciated. Thank you.

  Please repost your question in Forum Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where people who specialize in IE issues (such as problems with the favorite tabs) will be more than happy to help you with your problem.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Problem with Capture Date & time change

  I just became aware of a problem with the Date of Capture use to is very strange. Initially, a brief explanation of the import workflow I'm used with jpeg image 6 iPhone since Lightroom Mobile was presented. The images appear in the section of times iPhone app Photo, and from there I transfer to a collection in Lightroom Mobile. Once the collection syncs to Lightroom on my Mac (running latest El Capitan), they sort by capture time and I make choices and rename images. I have a naming preset that adds automatically the date to all the images. Recently, I noticed that some of these images, but not all, have been appointed with the wrong date. I had traveled without my computer - only my iPad, and it was a month before the images have been synced on my Mac it was very obvious that the dates were incorrect. The problem may have expressed earlier, but if the date was off by a day or two he would not have been as sensitive.

  The problem occurs when I take pictures with the app in time of MomentLens company. I use the application because it is designed to work with instant attachment lenses and the case of the Moment (which makes no difference in time to capture problem).

  
  

  Once that the images are added to LR Mobile news for images show good capture date and time. That's when they images sync for LR (latest version) that the problem occurs. And this is not a problem of LR Mobile, such as changes of date and hour occur if images of the iPad are added to LR without using mobile LR (from the iPad to Mac with AirDrop). Looking at the EXIF metadata Panel in LR, images taken with the iPhone camera app show three dates: Date time Original Date time digitized and Date time - all the which three are the same. Show only pictures taken with the application of the time Date time, but it's the same as in the iPhone Photo app and in LR Mobile capture time. However, when I show info on imagine in Lightroom, the time that appears to capture the time is the time that the image has been synchronized (if it came at LR Mobile) or the time that the image has been added to the iPad over wifi. It is also the time that is added to the preselection of naming. Note that if I send a picture directly from the iPhone to the Mac with AirDrop the date and time is correct.

  For the life of me, I can't understand this anomaly. I did thorough Imaging tests, and it happens only with the application of the time - other camera apps do not exhibit this problem. Interestingly, LR recognizes both the time Soft, which is reported under EXIF on the range of software and the lenses of the Moment when it is used with the iPhone the Moment case.

  If anyone has any ideas I'd be pleased to entrance. Thank you

  The link to the file is Dropbox - Photo of the Moment

  I have just confirmed with Exiftool that the sample file does not EXIF:DateTimeOriginal, although it does not contain EXIF:DateTime.

  You can send the following to the current time, the EXIF 2.3 specification:

  

  

• Problem with field date

  Hello
  I have problems with the dates. I have a datagid which fills the XML values. Some examples of dates in the xml document.
  (1) 2008-08 - 05T 00: 00:00Z
  2) 2008 - 07-22 T 00: 00:00Z
  (3) 2008-08 - 04T 23: 00:00Z
  4) 2008 - 07-11 T 11: 18:20Z
  
  I have the function that is called when an element is clicked on the data grid. This function is supposed to take the above date and the date of the datefield in a summary Panel. I continued to get xmllist@23232 to date conversion error if I tried to bind the property of selectDate datefield in dataGrid value.
  
  I've seen examples of datefield defined using a date object. So I stored the date above in a string. Screens of the string data fine only thing is a the componenet (T) of time as well. So I split the string using the string to split the function and the use of "T" as a separator. The problem is the 2nd and 4th dates in the above examples worked well and display perfectly in the datefield.
  
  The 1st and 3rd dates however wrongly displayed. I've posted the table stored items from split, which found that the date of the first one 2008-08 - 05T 00: 00:00Z rose in 2008-08-06 instead of on 2008-08-05
  and for 2008-08 - 04T 23: 00:00Z rode in on 2008-08-05 instead of 2008-08-04. I checked the string that was storing the data grid data and who has been properly storing the value.
  
  any suggestions?
  
  see you soon
  Aerts
  

  sorted,
  lacked a bit of caffeine. I had another string of storing a value different date and because of my stupidity, I tried to parse this string and get the two different dates.

  see you soon
  Aerts

• Problem with the DATA types, in a UNION

  Hello
  I m trying to disply a custom message when no data found using the structure below. Unfortunately I ve you have a problem with the data types I im trying to union
  I tried different types of data in the 2nd SELECTION tool but the rest of the problem. Help, please.
  
  SELECT HOSP_NAME 'HOSPITAL' DOC_SUR 'NAME', 'NAME' DOC_NAME, d.DOC_ID ID, diagnosis
  H., DOCTOR d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1
  
  UNION ALL
  
  SELECT TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), TO_CHAR ('test'), 0
  OF THE DOUBLE
  If NOT EXISTS (HOSP_NAME 'HOSPITAL' 'NAME' 'NAME' DOC_NAME DOC_SUR, d.DOC_ID ID, diagnosis
  OF ΝΟΣΟΚΟΜΕΙΟ h, ΙΑΤΡΟΣ d, (SELECT d.DOC_ID, COUNT (d.DIAGN_ID) diagnosis
  OF PATIENT_DIAGNOSIS d
  GROUP BY d.DOC_ID)
  WHERE diagnosis > 1);
  
  
  ORA-01790: expression must have same type of data, matching expression
  01790 00000 - "expression must have the same type of data, matching expression.

  DOC_SUR 'NAME' DOC_NAME 'NAME', ID d.DOC_ID, HOSP_NAME "HOSPITAL", diagnosis

  What is the data type for these columns

  To_char('test'), to_char ('test'), to_char ('test'), to_char ('test'), 0

  What you're doing here 'test' is already a character. Why do you use TO_CHAR?

• Problems with the date in the procedure on Oracle 11 g

  Hi gurus,
  
  I have some problems with the date under Oracle 11 g format.
  
  Let me explain the situation:
  
  When I start such a request
  Select to_number (to_char (to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'))
  of sys.dual
  
  I had as a result 2009 under the number.
  
  When I do the same thing in a procedure of a package like this
  
  my_year: = to_number (to_char (to_date('01.04.2009','dd.mm.yyyy'), 'yyyy'));
  
  the my_year variable contains the value 9 instead of 2009.
  
  Can someone explain to me what goes wrong?
  
  I just tested with the evolution of the variable nls_date_format of environment for the session and the database is complete without success.
  
  Kind regards
  Björn

  Yes, it has everything to do with your environment settings.

  SQL> set serveroutput on;
  SQL>
  SQL> declare
    2    my_date date;
    3    my_zeitstempel varchar2(32767);
    4    my_tageswechsel float;
    5  begin
    6    my_zeitstempel := '01.03.1998 07:00';
    7    my_tageswechsel := .25;
    8    my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
    9    dbms_output.put_line( my_date);
   10  end;
   11  /
  01-MAR-98
  
  PL/SQL procedure successfully completed.
  
  SQL> alter session set nls_date_format = 'dd.mm.yyyy hh24:mi:ss'
    2  /
  
  Session altered.
  
  SQL> declare
    2    my_date date;
    3    my_zeitstempel varchar2(32767);
    4    my_tageswechsel float;
    5  begin
    6    my_zeitstempel := '01.03.1998 07:00';
    7    my_tageswechsel := .25;
    8    my_date := to_date (substr (my_zeitstempel, 1, 10), 'dd.mm.yyyy') + my_tageswechsel +1/24;
    9    dbms_output.put_line( my_date);
   10  end;
   11  /
  01.03.1998 07:00:00
  
  PL/SQL procedure successfully completed.
  

• Problem with the new tab button

  The problem with my Firefox, it's the 'new tab' button at the end of the last tab, then in the menu "open a new tab" doesn't work at all. Open a new window does not work but the new tab not. That's happened?

  This problem may be caused by the Ask.com toolbar (Tools > Modules > Extensions)

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Problems with the Panel tabs with CS5, CC2014, CC2015?

  I created a script with TabbedPanel in ESTK CC, works very well in afx CC 2014, but it seems that there are some problems with the other versions (CS5 and CC2015).

  Can someone help how to generalize the limits and the tabs?

  Here is my Code briefly for the tabs.

  //

  //

  //

  function buildUI (thisObj) {}

  var myPanel = (thisObj instanceof Panel)? thisObj: new window ('pallet', 'Gear of Stress', undefined, {resizable: true});

  myPanel.timeSavers = myPanel.add ('tabbedpanel', [0,0,400,300], "Reducing Stress V1'");

  myPanel.timeSavers.cProject_tab = myPanel.timeSavers.add ("tab", undefined, 'Project');

  myPanel.timeSavers.MyTools_tab = myPanel.timeSavers.add ('tab', undefined, 'MyTools');

  myPanel.timeSavers.Explorer = myPanel.timeSavers.add ("tab", undefined, 'Explore');

  myPanel.timeSavers.Others_tab = myPanel.timeSavers.add ("tab", undefined, "Install");

  Return myPanel;

  }

  var myToolsPanel = buildUI (this);

  //

  //

  //

  Below the results to remain CS5, CC2014, CC2015. How to promote the universalization of the buttons, tabs, alignments etc as in CC2014 in other versions. Someone please help?

  

  Don't you think that the resource string could solve this problem?

  You can certainly try a resource string. I used only once I understood how they worked, I find it much easier to build a UI in this way.

  myPanel.layout.layout (true);  Tried it, but all child elements arranged in a line or column that's it, do not respect the limits specified.

  To a resource string, make sure that every single container element specified margins or spacing info. If they do not have this set the automatic layout manager will just default to each calibration of control internal specifications, which vary with each version of AE.

  How can I universalize the user interface for all versions of EI? While I'll change once and for all.

  There is no miracle solution for all versions of AE to play nice with your construction. You to beta-test your code in each version of the EA you want your script to run on and then unique questions individually. Your script should contain a checker version AE, so you can know what patches, you need to implement when the user runs the script. It is not ideal and is one of the many oddities of software development based on the API of someone else.

• Problems with Samsun Galaxy Tab Android 3

  Hello:

  We have a problem with a Samsung Galaxy Tab 3.  The app is installed fine game of Google store. It does not show thumbnails of the public/free journals on the library (black rectangles just to appear). The signs of the user in the application (we live right active) and thumbnails of law journals are displayed with black rectangles. Taps user on a blanket and it starts to download, but all of a sudden the screen goes black and the user has kill the app and then restart again.

  Any suggestions on what could be the problem?

  Saludos...

  Testers told me that once they did a software update (fram, Samsung), everything works fine on this device.

• Problem with cells date for integrated workbooks ADFDI

  Hello
  
  I have some problems with my built-in workbook DI ADF date fields. My situation is as follows:
  -My request for merger is hosted on a server from another time zone. The time difference is 10 hours.
  -In my workbook, I insert a new line. For the lines that represent the dates, I insert the current date.
  -Excel workbook, I download the new created the line on demand.
  -The result is that in the database, full dates are converted to the zone time server (ex: 26/01/2012 is converted to 25/01/2012 14:00).
  
  Can you help me with an ideea?
  
  Thank you
  Alex.

  I have to disagree. A date and time object represents a time: noon in California is from 15:00 in New York. More important still, if you enter noon in California and upload, you had better get back midi when you download then (in California) little any where servers can be. ADFdi guarantees than uniformity.

  can more details on how I change the type of my date attributes

  I suggest that to start a new thread for this question.

• 5 d Classic - problems with the Date of creation on the files

  I use Bridge CS5 v 4.1.0.54 and am having a problem with my 5 d classic, where some of my photos are dated correctly, and then some are dated as 11 hours later. They were all kick the same camera and same lens (no), a few seconds apart. Date information only appear to be incorrect in Bridge and are therefore sorted incorrectly, making it difficult for the workflow. However, I still have the pictures on my camera, so I took the CF card and examine its contents in Windows. In this case, all dates seem to match and be consistent. I posted in other forums, and most have suggested that there is probably a problem with Bridge, ACR, or Photoshop.

  I have provided links below for an example of images with different info Date created by bridge and then the correct information of the Date of creation in Windows when you view them on the map see

  I saw cela in at least two different scenarios recently. Haven't looked through all of my recent photos still to say whether or not it's got more than that.

  Any help would be appreciated.

  Thank you

  Jamie

  -Adobe http://www.jamiegphotography.com/portals/0/images/datecompare.jpg

  -Windows http://www.jamiegphotography.com/portals/0/images/PhotosWindows.jpg

  Have seen the problem before.  Two things to try.

  1. empty the cache in the folder with the bad weather (Tools/cache/purge cache folder xxxx).

  2. read this link http://forums.adobe.com/thread/854763.  The guy is from Austrialia and concluded that, after a certain time bridge labled it the next day.  Where are you from?

• Problems with the pages of models CS3

  My site is www.cft-aft.org and I have problems with a page or two that were created from a master template that the images are not loading or projection. An example can be found at http://http :// www.cft-aft.org/Get%20Involved.html. I don't know what the problem is or how to diagnose.  All pages of this website have been created from the master template. I had some file management problems in the past, and I think I have corrected most of them (with the exception of the change of name without spaces). I understand that this could be a problem and if it is my problem with this specific page, I understand.

  I have attached a few screenshots of the presentation of dreamweaver and a screenshot of my side of local and remote sites.

  The main problem with the page get involved is not editable images do not exist. Everything lies in the local root folder of the site/htdocs, on both sides. I noticed that when I do to the top of the page get involved in DW is at the top right of the screen, he reads a long path (shown as an example on the screenshot) and on other pages which load correctly, the path is not the same thing, but they reside in the same folder. I suspect that this is probably my problem, but I'm confused, how it got like that and worse still, how fix without having to completely rebuild the page.  I am a total novice and teach me how to do this using the DWCS3 Missing Manual book, but I can't find a solution in there, so please help if anyone can, with step by step instructions.

  If anyone has any idea how it happened, I'd appreciate comments so I do this again.

  If more information is needed, please let me know.

  Thank you

  Hi, Kelly.

  What keeps you from renaming files with Word spaces? It is a good idea. On ALL of your files. Rename them to the INSIDE of the files Panel.

  You work in a defined site? Yes, you are.

  The page you we directed (with an address disheveled, but easy to fix on the track), shows a large number of links to files on your computer, do not using links to other files in your root directory.

  You must open your template and reapply links to all images. Save the model. Once you have re-applied the links in your template Master.dwt, change > models > update of the Pages... while your model is open (especially if DW does not ask if you want to update the files). Record everything (better yet, don't have other pages opens when you update the pages...).

  Depending on how you created your page "Se Involved.html", it would be preferable for you to set up a new page of the child of your template and copy the changing content of the old page. Name the new page (without spaces in the file name... lol...) and save it. You won't be totally rebuild the page, because a lot of it will flow in your model.

  Commenting on your illustration to pdf, you want the indicator model-based Yellow Page in the upper right of your page based on a model of read model: Master. Pages containing the path to the top there are incorrect. I don't know how this happens, but it could be a problem with moving the files outside the DW (bad idea)... always use the files Panel to move files. You have full access to your computer in this window.

  Beth