GTX 650 PC not start
Hello
I have a Hp p6745ru
I recently bought the 650. GTX when I install the screen card startup hp turns on and just there for a while. I hear a followed another beep beep about 30 seconds later. Then the screen goes black.
I refreshed Windows and remove all drivers associated with the latest GPU.
PC with my radeon hd6570 everything is working properly.
The power supply of the system is 550w recommended by nvidia for the 650.
Map of have no vices, I tested it on another PC.
I read on other forums, that my motherboard is not compatible with my 650 gtx because the BIOS is a very old, so I have him to update, but I can't find a new version (on the site official c. 7.15 but this version ver. 2011).
Where is the new version?
Thank you very much
Rimad
Hello
Removing the drivers will not solve the problem.
I suspect that the NVIDIA GTX 650 isn't compatible with your PC. Your PC is 3 years and I don't expect HP to post an update of the BIOS of your PC.
Return the graphics cards and try the NVIDIA GTX 660 or one of the NVIDIA GTX 750 models.
MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF
Tags: HP Desktops
Similar Questions
-
GTX 750 will not start with HP P7-1233w
Hello
I use a desktop PC HP P7-1233w and the EVGA GTX 750 will start at the HP Logo blue screen and after about a minute it will boot to a black screen (and that's all). When I leave the card it starts very well. I know that my diet is very well that others have used a GTX 750 Ti with the same block of power SUPPLY HP OEM as mine.
When the system comes on, I hear the spinning card fans. So I don't know, it's getting power and video. I tried everything, including clear CMOS. I also started in Mode safe, off the map graphic, firm and installing the card. Just to get the same thing.
In my system motherboard is a MSI MS-7778 (Jasmine). I thought that it could have something to do with the UEFI settings and inheritance, but there is no option in the BIOS and there is apparently no updated BIOS for my motherboard.
If someone could help me, that would be greatly appreciated.Hello
HP P7-1233w was released in may 2012, and HP has not started to ship full UEFI level consumer computers to office until the middle of October 2012.
Modification on the motherboard to a card mother UEFI would require a new license of Windows 8. Windows 7 will not work in UEFI mode without some special hacks.
-
Upgrade to 750 GTX ti - will not start
I want TO 700-209
I just swapped the graphics card and added a ti 750 gtx
The computer does not start and goes to auto repair.
I also added a blu ray player.
I ended up restoring with the new installed hardware. Windows is running now, So far so good. Fortunately, I had a lot of my important data is backed up.
-
HP Pavilion HPE h8-1216 Desktop PC/new Nvidia Geforce GTX 650 will not install
HP Pavilion HPE h8-1216 Desktop/windows7
Have already replace supply 500watts power when I put the old GT520 it works very well put when I replace it with the
GTX 650 that I just get the HP welcome screen, nothing else seems to work without a mouse and Esc just make the screen off
and the right of return to the HP welcome screen. Is there something that prevents the installation of the card?
Check the ASUS PCIe - x 16 video cards.
It all depends on your budget
The following map has inherited by default vBIOS. Check the specs on the ASUS cards.
-
HP Pavilion p6-2104ed: 960 GTX prevents the computer start
I bought a HP Pavilion p6-2104ed years but wanted to change the GPU. I have moved everything to a new case (Coolermaster 280), updated the standard power supply in a Seasonic 650 W 80 + gold and bought a new GPU (GeForce GTX 2 960).
The computer works perfectly in the new deal with the old GPU (Radeon HD 7550) but does not start with the GPU nw.
When I start the computer, the first startup screen appears and a total of three beeps are displayed until the screen goes black with a small line flashing in the top left. It's like this: https://www.youtube.com/watch?v=M9F0LWwZD3w
-J' I connect the GPU with a cable PCI for power and its lights and the fans turn on.
-There should be enough power to run all (650W).
-J' uninstalled the drivers before installing the new GPU.
-J' updated the BIOS via this link: http://support.hp.com/us-en/drivers/selfservice/hp-pavilion-p6-2100-desktop-pc-series/5187028/model/.... (not completely sure if difficult, I managed)
-I doubt that there is a problem with my RAM as the three beeps may indicate that the computer works fine with the old GPU.
What can be the problem and how can I solve it?
-Maybe it has to do with the legacy / settings UEFI? The MoBo should be compatible (http://support.hp.com/us-en/document/c03235578).
Is there a problem with the BIOS?
-It might help to disable the Integrated GPU? If so, how. I can't find the right settings.
-Am I misunderstood something?
An overview of all don't care (Dutch):
-Intel (R) Core i7-2600 CPU 3.40 GHz, 3401 MHz, 4 core('s), 8 logical processors
-Mobo: Foxconn (H-CUPERTINO2-H61-uA (Cupertino2) TX)
-BIOS-versie/datum FRIEND 7.16, 23/03/2012
-Geinstalleerd fysiek geheugen (RAM) 6.00 GB
-Totaal fysiek geheugen: 5.98 GB
Available - fysiek 2.50 GB geheugen
Totaal - virtueel 12.0 GB geheugen
Available - virtueel 7.35 GB geheugen
Ruimte - voor wisselbestand: 5.98 GB
-Running GPU: AMD Radeon HD 7500
-No operation GPU: MSI GeForce 960 GTX 2 GHelp is very appreciated!
After installing the different mobo, I finally managed to get the new gpu to work. Thank you all for the advice.
-
My bootcamp partition is not start after resizing partition. I'm under el capitan. Thank you very much for your help!
Last login: Saturday, June 25 at 14:30:15 on ttys000
independenceadec1s-Mac-mini: ~ the independenceadec1 list $ diskutil
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 256.1 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Untitled Apple_HFS 1 GB 101,0 disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: Apple_HFS 71.3 Untitled GB disk0s4
5: Microsoft database BOOTCAMP 82.7 GB disk0s5
independenceadec1s-Mac-mini: ~ independenceadec1$
Can you use [help] can not boot Windows after resizing partition (8.1) as reference and check if the solution will work for you?
-
Minecraft could not start because it could not find an accelerated opening
I installed Minecraft and when I tried to install and download got this error message - don't know what to do next
Bad video card drivers!
Minecraft could not start because it did not find an accelerated OpenGL mode.
Generally, this can be corrected by updating the video card drivers.BEGIN 7fe0271 error REPORT
Generated 17/03/12 19:51Minecraft: Minecraft 1.2.3
OS: Windows XP (x 86) version 5.1
Java: 1.6.0_31, Sun Microsystems Inc.
VM: Java hotspot Client VM (mixed mode), Sun Microsystems Inc.
LWJGL: 2.4.2
Unable to get system (java.lang.NullPointerException) propertiesorg.lwjgl.LWJGLException: Pixel format not accelerated
t org.lwjgl.opengl.WindowsPeerInfo.nChoosePixelForma (Native Method)
at org.lwjgl.opengl.WindowsPeerInfo.choosePixelFormat (WindowsPeerInfo.java:52)
at org.lwjgl.opengl.WindowsDisplay.createWindow (Windows wsDisplay.java:185)
at org.lwjgl.opengl.Display.createWindow (Display.java:311)
at org.lwjgl.opengl.Display.create(Display.java:856)
at org.lwjgl.opengl.Display.create(Display.java:784)
at org.lwjgl.opengl.Display.create(Display.java:765)
at net.minecraft.client.Minecraft.a(SourceFile:230)
at net.minecraft.client.Minecraft.run(SourceFile:650)
at java.lang.Thread.run (unknown Source)ERROR e32a7ca2 END REPORT
Have you read this:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65633 -
After installing a video card and a new PSU (Antec 25 430 WATT power & NVIDIA GEFORCE GTX 650), my system has become unstable. It worked fine for the first 3-4 hours, then had a BSOD (blue screen of death) with kernel_data_inpage_error 0000007 a and later a 000000F4 of critical failure of the process. I did all the tests mentioned on this page but also removed and replaced the cmos battery:
* 1137.html http://www.faultwire.com/solutions-fatal_error/kernel-Data-InPage-Error-0x0000007A-
All the tests passed and no problems have been found, and yet the system still does not work after 3-4 hours of use.
So, I removed from my system and restored to its original settings. He seems to be back to normal now (but we'll see how long).
This experience has demoralized me. This is because I heard other people having difficulties trying to upgrade their systems. Looks like he has about a 50% success rate, unless you know what works from past experiences. I think that the only way to get a system that now has good graphics is a well tested game box (PS3, XBOX or Wii). Are there any recommended or possibly well tested configurations for this type of system that could give me the quality of a GEFORCE GTX 650 without result in a blue screen or instability for my computer?
Because this computer comes with ATI and AMD parts, I guess that maybe to get an ATI or AMD graphics card would work? Whatever the graphics card, the 250W power that comes with this system would probably need to be replaced. Are there any power supplys that recommend or possibly tested?
I realize there are a few questions in this post, but I have a more. Is there any motherboard of analytical tools to enusre that nothing went wrong with the motherboard? When the blue screens are produced that it seemed to make strange noises from the drive as he stole it and after the reboot it would sometimes fail to recognize the existence of the hard drive as well. Given that all the hard drive passed (I also ran SeaTools), which leads me to believe that power is great, but I fear now that if I upgrade the power it will only cause more problems.
A paying, customer
Zintage
The machine was only 2 years old. It of a shame that it worked so well for so long and then brought by a poor diet. It is a 750 GB Seagate Barracuda hard drive.
I went back to the power supply and the video card, cut my losses and buy a 1 TB drive. I cloned the old disk (on fortunately he was still working) and left on for more than 24 hours. The system is now on his feet and works as it should. Who will be last and only attempt to upgrade.
-
Do not start after installing Bootcamp find for dual boot
This is my 1st post on this site, hope I don't live to the top.
I tried to install the refined Boot Manager and screwed up my Bootcamp for windows 8 will not start. He appears at startup by pressing the option key, but it doesn't do anything else than a screen black when selected. Even when you choose to start in CD/DVD, black screen. I read some posts similar to this, but suggestions of 'LonerT' he has not fixed my problem. I hope that LonerT or someone of his knowledge base is available to help me, I really don't want to reinstall the window if it can be helped. :-)
This is the information requested by the LonerT in previous posts:
AV-server-enet: ~ list of joe$ diskutil
/ dev/disk0
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 750,2 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Microsoft database BOOTCAMP 749,9 GB disk0s2
/ dev/disk1
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 750,2 disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS Macintosh HD 150,4 GB disk1s2
3: disk1s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft data base KodiBuntu 598,9 GB disk1s4
/ dev/disk2
#: NAME SIZE TYPE IDENTIFIER
0: ESD-ISO * 4.7 GB disk2
AV-server-enet: ~ joe$ sudo fdisk e/dev/disk0
Password:
Fdisk: could not open/usr/standalone/i386/boot0 MBR file: no such file or directory
Type 'help' for more information
AV-server-enet: ~ list of joe cs $ diskutil
No logical volume group CoreStorage found
AV-server-enet: ~ joe$ sudo TPG - vv - r show/dev/disk0
Password:
See the TPG: / dev/disk0: mediasize = 750156374016; SectorSize = 512; blocks = 1465149168
See the TPG: / dev/disk0: MBR suspicious to sector 0
See the TPG: / dev/disk0: Malformed MBR at sector 0
See the TPG: / dev/disk0: Pri GPT to sector 1
See the TPG: error: wrong card
See the TPG: could not open device ' / dev/disk0 ': Undefined error: 0
AV-server-enet: ~ joe$ sudo fdisk/dev/disk0
Disk: geometry / dev/disk0: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-409639]
02:07 25 159 7 - 1023 254 63 [411648-951814144] HPFS/QNX / TO THE
03:07 1023 254 63-1023 254 63 [952225792-512917504] HPFS/QNX / TO THE
* 04:07 0 0 0-0 0 0 [0-0] HPFS/QNX / TO THE
You don't have a training camp entry in the MBR.
Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it. Once the GPT Fdisk is installed, perform the following steps.
Rebuild the MBR to match the new GPT information so reset the hybrid MBR. Use by default for other issues (such as codes of the partition). The only values that need changes are the flags of Boot and step 10. Accept all other default settings that offers Gdisk. For example, see the Q & A of the sample. These steps can be repeated if you make a mistake, before we get to step 12, otherwise start at step 1 for these steps. Step 6a of the numbers that are typed with a space between the numbers. Please see le Q & A sample before performing these steps.
- Sudo gdisk/dev/rdisk0
- P (print from parts list)
- R (Recover)
- O (current MBR hybrid in block letters)
- H (chooses hybrid)
- Partitioning numbers be hybridized: 2 3 4
- Y (good for the GRUB question)
- (Indicator boot part 2) N
- N (part 3-flag of boot)
- Y (boot indicator part 4 make the bootable NTFS partition)
- O (current MBR hybrid in block letters)
- W (Write new MBR)
- Y (yes! write the new MBR)
- Reset
Here's Q & A sample for this section. Please note the press enter/return.
Partition of EFI GPT (0xEE) place first in the MBR (good for GRUB)? (Y/N): Y
Create entry for the #2 GPT partition (partition MBR #2)
Enter a hex code MBR (default AF): press enter/return
Set the bootable flag? (Y/N): N
Create entry for the #3 GPT partition (partition MBR #3)
Enter a hex code MBR (default AB): press enter/return
Set the bootable flag? (Y/N): N
Create entry for the #4 GPT partition (partition MBR #4)
Enter a hex code MBR (default 07): press enter/return
Set the bootable flag? (Y/N): Y
Test 1 - Bootcamp Volume appears in the viewfinder?
Test 2 - you see the files in the Bootcamp Volume?
Test 3 - you can select Bootcamp in system-> startup disk preferences?
Test 4 - If Test 3 was successful, select Bootcamp and click on restart.
-
EVGA GeForce GTX 650 desktop computer HP Pavilion HPE h8-1120une Ti
I have had this computer ( http://support.hp.com/us-en/document/c03000614 ) this computer for about 2-3 years and I plan on updating my the 530 gt graphics card to the gtx 650 ti ( http://www.amazon.com/EVGA-GeForce-Dual-Link-Graphics-01G-P4-3650-KR/dp/B009KUT322/ref=sr_1_3?s=elec... ) that my old card can't handle modern games for example battlefield etc. 4.
I'm not an expert in the technology when it comes to the installation of pc hardware. If someone could give me any insite on how this can be done or if my pc case will be ENOUGH space or that it is compatible with my motherboard / bios of the computer/etc for this graphics card!
Thanks for your time
John, welcome to the forum.
The video cardback in your case. It is 6 "x 4,38". However, the power supply unit (PSU) in the computer is only 300W. The card requires at least a 400W POWER supply. This would require an upgrade of the PSU, as well. In addition, the card has a connector 6 extra pins. The current PSU will not have the necessary cable for extra power.
I like to use Newegg to review components. Normally, they have the best section 'Technical data' for the products they sell.
Here are requirements for the battlefield 4. You have reason to believe that a video card is your weakest component.
Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.
-
I have the same problem as this post 2013! Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.
I installed a new power supply (Seasonic 620W), which works well. I also installed a GTX 660Ti last year and it was works fine as well. I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.
My BIOS date is 2011.
Where can I find an update for this?
I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use. Should I do back up to 7 or 8? and then update the BIOS? Y at - it a update for my BIOS and where can I find.
In any case, I hope that this is a solution. Again, this is not a bad machine to be 5 years old.
Thanks for any help!
If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.
It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.
I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS. I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards. I would return to the map. Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.
ZOTAC (they don't say anything about their product vBIOS)
https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core
Sapphire Technology
http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng
Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng
-
HP PAVILION HPE h8-1192d: could not start after installing new graphics card
I recently bought a Gigabyte GTX 750 Ti Black Edition to replace my old. But it will not start after installing on my h8-1192d, and stuck on the screen flash hp. Help, please!
Hello
NVIDIA GTX 7xx or 9xx series graphics cards will not work in your PC. The BIOS in "chicago" mothererboard is not compatible with the video BIOS in the graphics card. You will need to get an older card chart such as the one of the below listed OEM HP graphics cards. Depending on the graphics card, you may need to replace the power suplly.
-
Win 7 does not start after the creation of new partition for fileswaping.
Hello!
As the header says, Windows 7 does not start. Made a partition to swap files between OS X and Windows 7.
I saw in a thread that it could be repaired using fdisk. I'm really new to OS X, so I did not really
know what to do. Writing the result of the controls, I found in the thread.
I know now there is a warning to the partition AFTER installing Windows.
Would really appreciate if everyone took some time telling me what to do!
diskutil list
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 500,1 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage MacBook Hoveddisk 382,5 GB disk0s2
3: disk0s3 Apple_Boot Recovery 650.0 MB HD
4: Microsoft database FILDELING 16.6 GB disk0s4
5: Microsoft Windows HD 100.0 GB disk0s5 data base
/ dev/disk1 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD GB + 382,2 disk1
Logical volume on disk0s2
AD4E7A3F-9F8E-4734-8B4B-B65587CDD2A1
Unlocked encrypted
Fdisk/dev/disk0
Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]
Signature: 0xAA55
From end
#: cyl hd s - cyl hd s id [Start - size]
------------------------------------------------------------------------
1: EA 1023 254 63 - 1023 254 63 [1-409639]
2: AC 1023 254 63 - 1023 254 63 [409640-747116216]
3: AB 1023 254 63 - 1023 254 63 Boot Darwin [747525856-1269536]
4: 0 b 1023 254 63-1023 254 63 [748795392-32403968] Win95 FAT-32
TPG - v - r see the/dev/disk0
See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168
See the TPG: / dev/disk0: MBR suspicious to sector 0
start index size summary
0 1 MBR
1 1 Pri GPT header
2 32 table GPT Pri
34 6
40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 747116216 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC
747525856 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC
748795392 32403968 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
781199360 262144
781461504 195311616 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
976773120 15
976773135 32 table dry GPT
976773167 1 dry GPT header
Please after the release of
sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C
You see the Windows files in the volume of training using the Finder?
-
EVGA GTX 650 Ti SSC and HP H8-1455 compatibility (black screen)
Material
HP H8-1455
Win 8 64-bit
Black screen (problem)
When installing EVGA GTX 650 ti SSC
Try installing an EVGA GTX 650 ti SSC in a h8-1455 HP with a 460w power supply. I uninstalled the 7570 AMD drivers and disabled startup secured on the motherboard (EVGA support). I'm leaning towards what is either a related problem of bios, or not enough power through the connector 6-pin. I tried two different cards same question.
Any other ideas?
Fixed. In addition to a new power supply and by disabling secure startup, you must also enable legacy support. Found a thread on a site of Nvidia.
-
Care of my MacPro is lower from a previous post. It does not start, but keep train. I get the rope to music if I stop and start again. Advice please. Thank you very much. Allan
Mac Pro (early 2008) (data sheet)
Mac Pro - model: MacPro3, 1
2 3 GHz Quad - Core Intel Xeon processor: 8 strands
8 GB of RAM expandable
DIMM Riser B/DIMM 1
1 GB DDR2 FB - DIMM 800 MHz ok
DIMM Riser B/DIMM 2
1 GB DDR2 FB - DIMM 800 MHz ok
Riser DIMM A/DIMM 1
2 GB DDR2 FB - DIMM 800 MHz ok
Riser DIMM A/DIMM 2
2 GB DDR2 FB - DIMM 800 MHz ok
DIMM B/DIMM Riser 3
1 GB DDR2 FB - DIMM 800 MHz ok
DIMM B/DIMM Riser 4
1 GB DDR2 FB - DIMM 800 MHz ok
Riser A/DIMM DIMMS 3
Vacuum
Riser DIMM A/DIMM 4
Vacuum
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en2: 802.11 a/b/g/n
NVIDIA GeForce 8800 GT - VRAM: 512 MB
HH281 1920 x 1200 @ 60 Hz
DELL3007WFPHC 1600 x 2560
OS X 10.10.2 (14C109) - since the start time: 20:27:26
ST3320820AS_P disk0: (320,07 GB)
EFI (disk0s1)
: 210 MB Disc 1 - system (disk0s2) /: 319,21 GB (17,69 GB free)
HD (disk0s3)
[recovery] recovery: 650 MB WDC WD5000AAKS-41YGA0 disk2: (500,11 GB)
EFI (disk2s1)
: 210 MB System install disks 1 and 2 (disk2s2) / Volumes/installation discs for systems 1 & 2: 16.11 GB (4.40 GB free)
Disc 2 (disk2s3) / Volumes/disk 2: 483,52 (291,34 free go-go)
Hitachi HDS721010DLE630 disk1: (1 TB)
EFI (disk1s1)
: 210 MB 3-1 TB (disk1s2) Dist/Volumes/Dist 3 TB: 999.86 1 GB (328,00 GB free)
Prolific Technology Inc. IEEE-1284 controller.
Hewlett-Packard HP LaserJet P2055dn
Hub keyboard Apple, Inc.
Logitech USB receiver
Apple, Inc. Apple Keyboard
Apple Inc. Bluetooth USB host controller.
EPSON USB printer
Mac App Store and identified developers
You still have OSX 10.5.8?
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
Subject of memory NVRAM and PRAM
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
-Start to recovery and repair the startup disk if Lion or higher
OS X: on OS X Recovery - Apple Support
Otherwise start from the installation DVD and keep the boot disk
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
Run the Apple hardware test. You will need one of the original installation discs
Using Apple Hardware Test - Apple Support
You may have a bad graphics card. The NVIDIA GeForce 8800 GT - VRAM: 512 MB are prone to failure
Maybe you are looking for
-
HP Envy dv6 CTO - 7300 Quad ed.: Simplepass mainly work - Can t Open Settings
When I try to open Simplepass via click right (so I can change the settings), software startup screen briefly appears, then disappears. I've never up until I can slide finger (log or manually) to change the settings. All other Simplepass functions se
-
Please help me find the driver for HP LaserJET COLOR PRO 200 for MAC OXC 10.10 YOSEMITE
-
Screenshot Manager prevents closing
Now and then, when I stopped, I get a message that the 'screenshot Manager' is running and prevent closure. This only lasts a few seconds and then the PC stops. I opened the desktop and Adope Photoshop and tried a 'paste', but there is nothing... I h
-
I generate several pdf files of our system and suppliers. I would like to create my own pdf by combining different pdf files into a single pdf file. I would like to convert a pdf file to excel for example.It's all the needs I have. Plan to use?
-
CALIBRATE_IO worked for 14 hours
Hello all,.Oracle 11g R2 on Windows 2008I started DBMS_RESOURCE_MANAGER. CALIBRATE_IO yesterday and it is still being more than 14 hours later.We use a San, so I did not know how many records so I used 1 for disks and 10 for latency.This is normal? A