Guard gmail move me to safe mode says that I am running version 3.6

Similar Questions

• My recovery D says that I'm running out of space. How do I free up space?

  My recovery D says that I'm running out of space. How to free space on D. I tried but doesn't seem to work. Any ideas out there. I don't download a lot of things and not use my computer a lot. Have had problems recently with memory. Could it be the problem?

  Hi Patio_karim,

  Try running disk clean up and remove unwanted system files and folders. Through disk cleanup, you can delete all the temporary files and folders that are not needed on your computer.

  1. open Disk Cleanup by clicking the Start button picture of the Start button, tap all programs, accessories, click System Tools, and then click Disk Cleanup.

  2. in the Disk Cleanup Options dialog box, choose whether you want to clean your own files only or all files on the computer. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. If the disk cleanup: drive selection dialog box appears, select the hard disk you want to clean and then click OK.

  4. click the Disk Cleanup tab and select the check boxes for files that you want to remove.

  5. When you have finished select the files you want to delete, click OK, and then click on delete files to confirm the operation. Disk Cleanup on delete all unnecessary files from your computer.

  Delete files using disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  You can also check out the link below for more options on the release of disk space on your computer.

  Strategies to free up disk space

  http://Windows.Microsoft.com/en-us/Windows7/strategies-for-freeing-disk-space

• I have vista ultimate 64 and I try to run HAWX in DX10. It is gray in the game. When I run DXDIAG it says that I'm running DX 11. How can this be? How to register for dx10?

  I have vista ultimate 64 and I try to run HAWX in DX10. It is gray in the game. When I run DXDIAG it says that I'm running DX 11. How can this be? How to register for dx10?

  Gearrunner,
  I have Windows 7 32-bit last month.  I installed the demo of HAWX and he ran a program compatibility Wizard after installation.  He showed that DirectX 10 has been installed.  When I run DXDiag, I also show DirectX 11.  Now, I have installed DirectX 9 .0c on this machine.  Then you can try to install it and see if that makes a difference.

  DirectX 9 .0c

  Of course now that I've tried the demo you have shot me in another game I have to play.  :)

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IM in safe mode because that's the only way to get into my computer it blue screens when I try on a regular basis, how to do a system restore or restart in safe mode?

  Hello I'm in safe mode because it's the only way to get to my desk, it blue screens when I try on a regular basis, how to do a system restore or restart in safe mode?

  Hello

  Do a restore of the system using the same safe as you would in Normal Mode.

  http://bertk.MVPs.org/html/restoresysv.html

  http://www.computer-answers.info/maintenance/Vista/How_to_Use_System_Restore.php

  See you soon.

• my computer runs only on 'safe mode' when I try to run regularly. It just goes to a blank screen

  idk what to do all I can do is power the computer on safe mode. its supossed to go to the user where I connect to the windows vista computer, but he doesn't. He's on the safe mode.

  some 1 help me please idk what 2 do... D:

  Try the following steps:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• How uninstall Firefox when it always says that it is running

  I checked all the troubleshooting suggestions to get Firefox running properly again. Finally decided that I just need to completely remove and download a new copy.

  Problem is when I try to uninstall the program he says "Firefox must be closed for uninstalling, close firefox to continue."

  I have, it does not appear in one of the processes that are currently running. Any advice?

  Hello
  Upgrate to the latest beta... 34.0.5...
  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
  2. Once the download is complete, close all Firefox Windows (or open the Firefox menu

     

     Click the close button

     

     ).

  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.

  Please report to say if this helped you!

  Thank you.

• I upgraded to FF 7.0.1 and it not is not loading. If I try to uninstall, it says that it is running. I have uninstalled and rebooted, and installed an earlier version, but the program does not open. Can someone help me please?

  I have tried everything I can think and suggested in your base of knowledge, but FF does not open. I downgraded to a version earlier, but which did not help so I uninstalled everything and did a clean reinstall of the 7.0.1. I restarted at every stage.

  However, when I tried to put my favorite chrome (so I could continue to work) he says that FF was opened. Same thing when I went to uninstall. The Task Manager is not running. Chrome works is not my internet connection.

  I have not installed a new software or hardware recently, although I've improved Roboform to the latest version. This is the reason to update to FF addon RF was not compatible with the version of FF I used.

  I scanned for virus and the machine is clean.

  I'm on a PC running Windows 7 Home Premium. Right now I'm working on my old laptop but I need to FF works on my main machine.

  Any help much appreciated.

  Thank you

  Kathy

  -> Recovery of data from an old profile

  Check and tell if its working.

• Photoshop says that I'm running a trial even if I paid.

  I bought photography package which is Photoshop and lightroom, I paid the first monthly amount. Creative application Cloud say that photoshop, I am currently running a trial version. It does not say that Lightroom however.

  I don't want to get to the end of 30 days and find Photoshop disappears.

  Thank you

  Hi NickEastham,

  Please see the below help document for this problem:

  Sign out, sign in | Creative cloud desktop application

  Kind regards

  Sheena

• System Restore will not work for any date and computer says that it is running in auto mode.

  I have a 30 GB master and slave of 160 GB. 26/03/11 I copied a large file of 11 GB of the master to the slave because I received alerts that the disc was or almost. After you have copied from C to D, I deleted the C file and the missing file of the two drives. I tried to use the restore of the system without result. No matter what I do "Unsuccessful System Recovery" is the only message I get. Is it possible to recover a file that took me hours to compile it?

  This looks like a self-inflicted wound / pilot error.

  Deleting files in the Recycle Bin does not release disk space.  When you delete things in the trash, all you really do behind the scenes moves the items from one folder to another folder (the folder to the Recycle Bin).  They always take place until you clear items from the trash.

  System Restore won't help you recover personal files anyway - this isn't what he does.  SR cares your personal files.

  A backup will help recovery of personal files.

  I think it's against the rules for people at Microsoft to suggest or sometimes even to read all the information of any URL Internet that does not begin with microsoft.com, where the previous warning about third party programs.

  However, I think that to get off the beaten track (as they say).

  This is a popular program of third party who sometimes helps to recover accidentally deleted files:

  http://www.Piriform.com/Recuva

  It may be too late for your files, but I would also check the configuration of your trash if you have several volumes of hard drive from your symptoms question do not quite add up correctly.

  Even if SR would not help in this case, your SR expected still works what is another potential problem to solve.

  Now I'm folding stock and return things to the technical support engineers.

• How to disable boot safe MODE permanently in the 43.0b6 version?

  I tried all the suggestions I can find online without success.
  I'm not a developer but I have some experience with programming, for example VBA, fortran, algol, etc., and I've used windows since 1981.
  However, I would really appreciate step by step clear instructions in English.

  I did a refresh using the link you provided (thanks a lot for this) and reinstalled a couple of my most used extensions. Everything seems to work as I wanted to work. I still have to allow some others and I clean probably a few that are just hanging out but which should be no problem.
  Thanks for the quick and easy solution to the problem.

• XP3 st6uck in safe mode will not start or run msconfig help

  someone knows how to order for it to stop and bring up msconfig to fix to normal, I can't restart to normal or last good config

  Hello

  What happens when you try to run msconfig?

  Try the following steps to start using the F8 key and check if you have the ability to start windows normally.

  a. restart your computer and start pressing the F8 key on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

• When I try to download a digital copy of a movie on my computer it says that I must have windows media player version 11. That's what I have.

  Windows XP Professional on a pc with a processor I3.  Windows media player works well, but apparently the version is not recognized.  Can I manually change the setting that gives the version number.

  Hello
  is it never worked correctly? Do you know if the codecs for WMP 11 is updated?
  If you have never heard this, click here for a quick overview:
  http://support.Microsoft.com/kb/306331
  Eddie B.

• How raise a synchronizaton event and say that it is running correctly?

  Don't know how to make a synchronization to occur, nor say if he is executed correctly. Please, point me to a "Sync Start Now" button so I can save information as it is created and show me where to look to see if the synchronization was successful.

  You can check the about: page of sync-log via the address bar to see if there are any available error logs.

  You can temporarily set the pref services.sync.log.appender.file.logOnSuccess true on the topic: config page in order to get also a newspaper of a successful synchronization.

  Do not forget to reset the pref services.sync.log.appender.file.logOnSuccess false after you are finished testing the synchronization, or you will end up with a large number of unnecessary log files.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• Windows 2003 Server keeps stopping every hour on and saying that he must run the Setup program to create a domain controller.

  WINDOWS 2003 SERVER STANDARD EDITION

  HELLO TECH TECHNICAL SUPPORT ENGINEERS.

  WE HAVE WINDOWS SMALL BUSINESS SERVER 2003 STANDARD EDITION,

  WE HAVE EVEN INSTALLED AND CONFIGURED IN A WORKING GROUP, WE DO NOT WANT TO CREATE A DOMAIN CONTROLLER,

  BUT OUR SERVER IS BLOCKING DOWN IN ANY ONE HOUR AND SAY TO RUN THE SETUP PROGRAM TO CREATE THE DOMAIN CONTROLLER.

  PLEASE SUGGEST, AS WE DO NOT WANT TO CREATE DOMAIN

  CONCERNING

  DECCAN TEAM

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Security Center indicates that microsoft security essentials is off, but essential security says that it is running and up to date.

  I ran a scan and update Microsoft security essentials and the little green house with the checkbox appears in my toolbar, but the Windows Security Center, said although it is turned off, but it tell me how can I activate...

  I ran a scan and update Microsoft security essentials and the little green house with the checkbox appears in my toolbar, but the Windows Security Center, said although it is turned off, but it tell me how can I activate...

  See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/my-safety-center-says-i-have-no-functioning/10a9ed7a-def7-4d50-9980-7d2ca68904a3

  Kind regards...