XP3 st6uck in safe mode will not start or run msconfig help

Similar Questions

• Home Vista Safe Mode does not start correctly. What should I do about it?

  Hi, I was struck by an unknown number of bugs. I don't know how.  I ran my anti-virus software and could not find bugs. I tried to start in safe mode to run antivirus and Vista programs won't let me access Mode without failure. I turn on the computer, press F8 repeatedly until my options appear. I tried the Safe Mode and safe mode with networking Mode. In both conditions, Safe Mode begins to start. Crosses of approximately 42 drivers and comes to the black screen with the oversized arrow, then the computer restarts.  What can I do?  I can't access Safe Mode!

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Set to start in safe mode, will not light

  My computer was working normally, no problem, no virus. I was troubleshooting a wireless connection problem and decided to try the safe mode, boot in safe mode. I tried to restart my computer in SafeMode with F8, but this does not work, it's just booted normally. Then I put manually the configuration to restart in safe mode (system configuration > boot > safe mode). After the attempt to restart the computer, it starts, but never turned on, nothing appears on the monitor. I tried several times, nothing. I also checked the material, that is not the issue. Powers of computer, tries to start, but nothing ever appears on screen.

  Computer running Windows 7 Pro

  No idea what could cause this, or how to solve without a clean installation?

  Try a system repair disc to start.  If you have not done one for you, you can do it on another Windows 7 computer as long as it matches the number of bits of yours (32 vs 64)

  You need a blank CD recordable.  Start, all programs, Maintenance, on the other PC.

  Insert the CD into your computer and start your PC, you must make sure that the PC actually uses the CD.  Which may require you to get a boot menu to select the CD player to do the marketing.  There's a key (on a Dell computer it's F12) you need to press when your computer starts to prepare and presents the start menu.  It varies depending on the brand of the PC.  You should see on your start screen briefly as he begins to launch.

  Once you have started on this CD, it will offer alternatives to repair the computer.  The one to which you probably need is to restore to an earlier date.  It does no data, only programs.

• Firefox crashes on startup in normal mode and safe mode does not start reset mode

  using 26.0 FF
  using windows 7 Home premium v 6.1 (last)

  My problems started after the loading of 26.0 FF. If I start FF in normal mode it crashes. Same thing when I boot in safe mode. I close FF (while it's hanging) by clicking on the X in the upper right.

  When I launch FF in safe mode and click Reset FF, it crashes without FF never appear. I have to stop it using the Task Manager. Off mode reset, I can launch FF in normal mode and everything works fine. However, stopping FF does not close it. I have to use the task of the Manager close. Then I'm at square one when you try to start FF, i.e. reset firefox, crashes, Task Manager, stop, then start FF.

  When FF is on, I can open a new window of FF. All my addons are up-to-date. I reinstalled FF 26.0, three or four times.

  I deleted the cache and cookies.

  I scanned for viruses and rootkits etc. with microsoft security essentials and spybot.

  I've been a happy user of FF for over ten years and have never had a problem like this. Any help will be appreciated.

  Thank you!

  I think that I fixed it, it gives a trial because he has started to do this on my two PCs.

  Go to Options > general tab > start switch / "Show a blank page" and the charges of all good. What I used was 'Show my home page' which is the default page of Firefox with the Logo of Fox and history, Favorites and other options at the bottom.

• The Explorer does not start, the Task Manager does not start, safe mode does not start. Wat to do?

  I have recently been diagnosed with some sort of spyware / trojan in Avira and, apparently, he had removed. Apparently NOT.

  Yesterday my laptop crashed and explorer.exe would not load at startup. The screen is all black with just the cursor. Windows Key + R is not raise Run and Alt + Ctrl + Del to appear the option lock and stop... but no task manager.

  Safe mode has the same problem. I tried the option restore also, but all the restore points has mysteriously disappeared.

  I wonder if there is no solution without a ridiculous amount of data backup and restoration of the entire system. Thanks in advance

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Operating system will not start and run - error codes 2000-142, 0F00:075 D, 41166486 uncorectable data error media wrtie block protect error code 0F00-0244

  I have dell 1525 top of the tower and OS will not run. Error code 2000-142, status bite 79, error code 0F00:075 D and Bios memory hard drive, SATA drive read your 41166486 data uncorectable media wrtie error block protect error code 0F00-0244then kept showing up on several more blocks.  Can I fix?  Joe

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to start the computer in safe mode and check if you can start the computer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the verification and startup repair if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Windows will not start since the update :( Help, please

  Windows could not start. a recent hardware or software change might be the problem

  file\windows\system32\config\system
  status: 0xc00000e9

  When I try to start the system restart that nothing happens

  When I try to restore the computer to factory settings it says that the necessary files are not there.

  My computer was working fine until I installed an automatic update from microsoft. Help, please

  For any problem with the recovery of software/process to factory settings, you will need to contact the manufacturer of your computer.
  This isn't their recovery process, Microsoft.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a Toshiba with vista 64-bit. Stuck on welcome screen and safe mode does not start loading windows files pass,

  My phone threw sleep for a few months because I had no internet. I just got the internet hooked upward and started the computer, worked fine until about 10 mins in., I got a blue screen crash. tried to restart and now when I click on my user account he just says welcome and very much in charge. halp please! Ive been working on this problem for 8 hours now and its getting a bit frustrating I sem find lots of ppl with the same problem or similar but not much help answers.

  Hello

   
  I suggest that contact your computer manufacturer to get the disc to repair the system to solve the problem.

• BSOD error: Windows will not start. 0x0000007E

  Windows XP does not start = get the BSOD after the Windows XP splash screen

  Last know good = does not.
  = Safe mode does not start.

  BSOD: Stop Error Message:
  Adequate disk space, check the updates to the BIos, etc...

  Tech. Codes: 0x0000007E (0x805BA6EC, 0xF79e32b8, 0 x 80000003, 0xF79E2FB4)

  Read, inwardly digest and then try the resolution...

  http://support.Microsoft.com/default.aspx/KB/330182 Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• Adobe Reader DC will not start.  Uninstalled and reinstalled.  Does not start while I can change protected view.  Any ideas?

  Adobe Reader DC will not start.  Running Windows 8.1.  Uninstalled and reinstalled.  Will not start.  Any ideas?

  Hey You,

  You get any sort of error message when you try to start the player?

  Please uninstall, run the cleanup tool to remove all traces and then reinstall it from this page: https://get.adobe.com/reader.

  You can get the cleanup of this page tool: Download Adobe Reader and Acrobat tool - Adobe Labs.

  Best,

  Sara

• iMac, 2012, 27″, will not start, not even in safe mode

  IMac my wife, 2012, 27″, El Capitan, will not start, not even in safe mode. The problem started during the installation of Mac Office 365 (2016), although the installation on my machine worked fine.

  The following two photos are sure Mac verbose mode. (Photos are from consecutive boots, that the camera did not focus, but the behavior of the Mac is constant in boots attempts.)

  http://www.jdawiseman.com/2016/20160218_230538_mac_wont_boot.jpg

  http://www.jdawiseman.com/2016/20160218_230059_mac_wont_boot.jpg

  Disc utilities reported an error. Although fsck - fy is not.

  Please, kind of people from the communities of Apple support, what should I try then?

  Thank you.

  Have you tried to boot into recovery mode. Combinations of keys start for Mac - Apple Support

  Select disk utility, then check the disc. Resolve startup issues and perform maintenance on disk with disk utility and fsck - Apple Support

  How much free disk space hard do you?

  What is the error Disk Utility has.

  Kim

• Our Toshiba Inspiron will not start windows, even in safe mode. Help, please!

  After the updates of this week, the system will not load anything.

  Hi Juliet,

  Thanks for asking the question in the Microsoft Community forum.

  From your description, I understand that after Windows Update, you can not load Windows.

  To better understand the question, please answer the following questions:

  1. What is the version of the Windows operating system that is installed on your computer?

  Reference: http://windows.microsoft.com/is-IS/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  2. what happens when you try to load the system? You receive an error message?

  3. what application or anti-virus security suite is installed on your computer?

  4. you remember after installation of update, you are facing this problem?

  Remove any external device connected to the computer without keyboard and mouse and then perform the methods.

  If you are using Windows 7 and Windows Vista, follow the mentioned methods:

  Method 1:

   

  If the computer does not start in safe mode, perform the last known good Configuration.

  Reference: http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Note: Link above also applies to Windows Vista.

  Question remains always use same method 2.

   

  Method 2:

   

  Try to perform the Startup Repair and check.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  If you are using Windows XP, follow the mentioned methods:

  Method 1:

  Perform the last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2:

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Hope the above information is useful, if you have any question back to us, we are happy to help you.

  Thank you.

• Acer Aspire laptop bluescreened, will not start even in safe mode, running vista

  My roommates son asked me to help him to be on the internet, which I did, ran unusually slow in doing so, I noticed it when I checked, I found that the notebook had three solutions of different software protection, antivirus, Norton, McAffrey and AVG 2011 version for free. Also I noticed he had some solutions that provided a diagnosis, list of problems found and wanted to pay for the product before they would allow acccess to the fix. I uninstalled Norton and the McAffrey and improved the AVG free version of 2012. I also uninstalled the pesky diagnosis/buy me for the correction and the ask.com toolbar software. I installed ccleaner from piriform as well. The laptop seems to run a little faster, but the next morning he projected blue and when I tried to start it in safe mode it not loaded so far and then frozen, always in the same spot something AVGi and then it crashes, it will not load the rest of the necessary drivers. I tried to boot to the last known good as well. I even tried to downgrade to Windows xp home edition sp3 and when I do it it says there is no hard drive detected, and do I have to make sure that it works correctly.  I am at a loss, my sons friends bought the laptop (Acer Aspire 5315) for $50.00 and did not get a recovery disk so that the option does not exist or the other. What can I do to solve this problem. I'm sure that for some reason, it has to do with the BIOS and I went to the Acer site (from my laptop) and downloaded something to repair the bios on a flash drive, but me is not good because I can not start on either flash player. I am at a loss here and have no idea how to solve this problem. I am practically self-taught and I am a beginner when it comes to repairing the problems. This one is right behind me, someone has an idea what is my problem?

  I even tried to downgrade to Windows xp home edition sp3 and when I do it it says there is no hard drive detected, and do I have to make sure that it works correctly.

  If you tried to install Windows XP, and it says that? Do you have any installation CD? I don't want to say this, but maybe the hard drive went kaput. Maybe a little rare, but it can happen and so he bought the laptop for $50, which I am sure he did not a store. You hear a clicking sound from the hard drive? Have you checked for the hard drive in the BIOS?

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Vista will not start even in mode without failure or will start up repair help

  Hello everyone,

  I've been many problems with my OS recently (Vista 32 bit business) and decided to reinstall (it was really a last resort). The relocation went well, but in the end, he got the black screen with the extended cursor and didn't budge (I left it overnight).

  I forced to restart at the end of the day, and now it won't start, it just says loading windows and displays the logo of loading, but will not charge.

  Safe mode will start to load the drivers, but then freeze, leaving a permanent list of drivers and a "Please wait".

  I tried to boot from the Vista startup disk, who works the Startup Repair very well and running. The first time, he said he found problems with the boot files automatically and then asks me to click on "repair and restart. Once I do, nothing changes, it's always the same.

  I tried to run a further startup repair, but it does nothing, just scans and scans and scans... but can't find anything in the newspaper (it is not passed the crawl log entry).

  I can access the features on the disc to start very well, so I ran guest and drive a DSKCHK (read-only), but again it froze in the third part.

  As far as I know all my hardware works fine, and a diagnostic scanning don't tell something abnormal.

  ... any ideas?

  Enjoy your time,

  Chris.

  Hi Chris,

  This resembles the faulty Ram or a hard drive does not properly, even if the systems on board diagnosis cannot capture an error!

  Of what you sayed I recon, it is a hard drive error more defective ram, try rerunning DSKCHK and see if it stops on part III, once again, if the fact, its probably your hard drive! Maybe someone else has a similar thought?

  Hope this helps with your problem.

  Jon