Guard remote office Session disconnect

Similar Questions

• "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  Hello

  I received the following error message

  "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  This happens when I try to log on my remote on the icon access log, I put on my computer at home so that I can get to work if I need to.  He worked for a few months after I bought my new laptop and software, but now suddenly it doesn't.  I talked to my guy TI in the work and they seem to think it's a common problem with "Vista Home Premium", I can do to change it so that I can use the remote access icon?

  Thanks in advance

  Hello
   
  Licensing protocol handles the communication of information on licenses between your computer and the remote computer. If there is an error in the licensing protocol, your computer may not be connected to the remote computer.
   
  To resolve this problem, restart the computer and try connecting to the remote computer. If you continue to receive this error message, contact the server administrator.
   
  This also occurs if one of the registry entries is corrupt. Try the following steps to resolve this problem.
  1. Click Start, type regedit and press to enter.
  2. on the window of the registry editor, navigate to Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
  3. right click MSLicensing, click on export and provide a file name for example RemoteKeyBackup and click on save to the desktop.
  4. right click on the HardwareID key and store under MSLicensing folder and click on delete.
  5 restart the computer for changes to take effect. Restarting the computer will create new keys.
   
  NOTE: If the problem persists, then you can take backup of the MSLicensing registry key and to load it on the computer of the problem, this will fix the problem.
   
  Visit this link for more information:
  http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx
   
  Important: Incorrectly editing the registry can cause serious problems on the computer.
  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry
   
  Try the steps and check the result.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How can I put an end to a remote desktop session?

  Original title: "Incoming connections"

  My Vista 32 bit Pro is configured to accept incoming connections.  How to break the connection to the client computer?  For example, if I plugged in to my box from a remote site, returned to the Vista Pro machine and realized I forgot to unplug then on the remote site?

  Hello

  Look at this page under How can I disconnect from a remote desktop session?

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-remote-desktop-settings

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Shutdown options of Windows 8 Remote Desktop session are maddening

  Hi, for windows 8.1 pro via a remote desktop session

  Press 'windows key' + 'X '.

  In the context menu, click "Shut down or signout.

  In the submenu, click on "stop" or "restart" or "sleep"...

  Hi, for windows 8.1 pro via a remote desktop session

  Press 'windows key' + 'X '.

  In the context menu, click "Shut down or signout.

  In the submenu, click on "stop" or "restart" or "sleep"...

  I use Pro 8.1 and I'm sorry but stopping and restarting do NOT appear when connected via a RDP session and you click on the key Windows + X (or right click on Start).  The options you get are (ironically) "stop or d├⌐connexion" > "Disconnect" or "disconnect".

  

• Remote Desktop Session Authentication connects to Active Directory

  Hello

  I would like to know when a Remote Desktop session is happening between two workstations in an AD domain, is an event recorded in the ad servers and if so, what is the category and event code.

  Thank you very much

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Connection of remote offices SPA3102

  My boss just bought two SPA3102 VoIP routers in an attempt to set up a VoIP connection to a remote office, thus avoiding expensive international calls.  I'm looking for advice on setting up.

  This is the ideal configuration, we're after.  Box, it is in the seat, and it is connected via the RTC port on a phone line (in fact the PBX).  His IP address is 192.168.32.8 (we are without using the routing of each box function, then the two boxes are connected to the network via the WAN port, with the side LAN not used at all).  Any incoming call on the telephone line must be connected directly on the phone connected to the box of two.  There is no phone connected to the box one.

  Box 2 is in remote desktop. For testing purposes, its IP address is currently 192.168.32.9.  He got a telephone connected to the telephone port, and the PSTN port is connected to a standard telephone line.  We want the phone to use the RTC line by default, but if the user dials 9 then, we wish the appeal directed to the PSTN line on box a (i.e. PBX.), where it can dial into a PBX it seeks.

  The offices are connected by a virtual private network, so there is no NAT anywhere to worry.

  I have a problem in this place, what with the instruction light manual and confusing options, so any help much appreciated!

  Here are the settings I've worked. I have omitted some.

  Head office

  WAN configuration:

  Connection type: static IP address

  Static IP: 192.168.32.8

  Subnet mask: 255.255.255.0

  Enable WAN Web server: Yes

  Line 1:

  Activate the line: no

  PSTN line:

  Activate the line: Yes

  Use outbound Proxy: no

  Register: no

  Call without Reg: Yes

  Call for years without Reg: Yes

  Numbering plan 1: (P1[email protected] >)

  (causes the call to transfer to the other box after a delay of one second)

  Enable VoIP to PSTN Gateway: Yes

  PSTN to activate the VoIP gateway: Yes

  PSTN through line 1 ring: no

  PSTN response time: 0

  PSTN Ring through delay: 0

  Remote Desktop box:

  WAN configuration:

  Connection type: static IP address

  Static IP: 192.168.32.9

  Subnet mask: 255.255.255.0

  Enable WAN Web server: Yes

  Line 1:

  The line activation: Yes

  Register: no

  Call without Reg: Yes

  Appeal of ABS without Reg: Yes

  Auto RTC backup: Yes

  Dial plan: (0 x<:@gw0>|) <>xx. <:@gw0>| <7:192.168.32.8:5061>)

  (This operation transfers the call to the seat on numbering 7 9 box gets an outside line, any number beginning with 0 is also formed through the PSTN line)

  PSTN line:

  Activate the line: Yes

  Enable VoIP to PSTN Gateway: Yes

  PSTN-to-VoIP gateway enable: no

  I have a problem on the left: calls to the phone remotely (both by the PBX and telephone line remote) are very quiet.  I played with the settings of Gain PSTN SPA to compensate, but I set the remote zone to its maximum of 12 and it is still too quiet, so I think that there is a problem elsewhere.

• Not being able to have the remote desktop session ssh in putty

  I have cisco ASA and I have configured the ASA to have connection remotely from remote offices as well.

  I used the command ssh 0.0.0.0 0.0.0.0 outdoors where outside is my external interface in ASA.

  But, whenever I try to access the ASA of PuTTY, I get this error "network connection closed unexpectedly server."

  What can we do to solve this error and get access to the cli of my ASA.

  In the same way I did for my GUI access in the ASA using the command

  http 0.0.0.0 0.0.0.0 outside and I have the ASDM access that works well but not ssh.

  I have to open the ssh ports using static nat and access list? Even the port check tool says that my port 22 is open.

  Help, please. Thank you for your comments.

  Hi dinia,.

  Generate you the encryption key?

  cry 1024 rsa key gen mod

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Losing keyboard focus when the remote desktop session

  Hello

  I have several computers Win7 it remote to the server of a hosting company. Our users will register in the servers of the hosting via remote desktop. The question that arises is that the keyboard stops working after a locking of the user, the computer, then returns after a short period of time to continue working. The remote desktop session will remain functional when the computer is locked. After unlocking the computer, the keyboard does not work in the remote session. The mouse is not affected by this and minimizing the session, the keyboard works fine on the local session. Sometimes, you need to restore down and then restore back or minimize the RDP session several times to get the keyboard works within the remote session. A few times, close the RDP session will cause the keyboard work again. Someone at - he lived it and have a resolution of this problem? This issue seems to occur more frequently and we have already created on the remote server user profiles, but nothing helped. Thank you for your help.
  Jon
  Hi Jon,
   

  Thanks for posting your question in the Microsoft Community Forums.

   
  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:
  TechNet forums various Windows 7

• Remote Desktop sessions fail with the error of data encryption

  All my remote desktop sessions attempts fail with an error of bull data encryption *. It seems that half of the world has this error and no one can provide an answer. Before binding you to an answer without value, it is all my clients servers with Windows Server 2003-2011 everything, cannot RDP to any of them.

  Most suggested answers a problem of router or server specific problem or suggest disabling large unloading on the network card.  Well, this problem hooked 30 + servers I've tried lately.  I tried with unloading defined on deactivate and activate.  I tried ethernet and wifi.  I tried to do different internet connect, work, home to various customer sites.

  In other words, I can no longer use RDP to connect to servers on ANY connection.  It simply doesn't work anymore.

  I run Windows 7 32 bit and this couple suddenly some days ago.  Before you start, no virus, no updated drivers... blah blah blah.

  The first day, he started, he wouldn't let me RDP via VPN but if I went through the external IP (mapped ports).  Then, it only works if I was on ethernet, not the wireless.  Then he just decided it wouldn't work at all.  Today, that I even tried to get back into the work remotely via RWW and the RDP ActiveX... did not work.  Tried both servers a SBS 2003 to 2008.  Nope.

  XP has a ten years more of life.  Win7 has done roughly three years, now it starts to fall apart.

  If you can fix this before moving on to Windows 8, and without having to wipe my whole PC, it would be much appreciated.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• VGPU session disconnects with pcoip_server_win32.exe NvFBC.dll

  I run a proof of concept VGPU VDI using Horizon 6.1 and Vsphere 6

  
  

  I have only 8 test VDI users and the solution is running on the local network.

  
  

  Some users reported session disconnects and w hen I checked the event logs on the clients (windows 7 64-bit) the following are entries.

  
  

  Users can reconnect to the session almost immediately and no work is lost.

  
  

  I use some Autodesk products (Revit, Navisworks, etc.) on the clones related and so far, the results have been very good and it is only slight complaint.

  
  

  Someone at - it ideas?
  

  
  

  The failing application name: pcoip_server_win32.exe, version: 3.30.0.50438, time stamp: 0x54d1c88a

  The failed module name: NvFBC.dll, version: 6.14.13.4752, time stamp: 0x54d3ad55

  Exception code: 0xc0000005

  Offset: 0 x 00002474

  ID of the process failed: 0 x 3050

  Start time of application vulnerabilities: 0x01d09d05d59b60fa

  The failing application path: C:\Program Files\Common Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  Path of the failing module: C:\Windows\Syswow64\NvFBC.dll

  Report ID: fe48f786-092e-11e5-b5e4-00505695e34e

  
  

  
  

  
  

  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: pcoip_server_win32.exe

  P2: 3.30.0.50438

  P3: 54d1c88a

  P4: NvFBC.dll

  P5: 6.14.13.4752

  P6: 54d3ad55

  P7: c0000005

  P8: 00002474

  P9:

  P10:

  Attached files:

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_pcoip_server_win_4265ee79b0dcca81767abba3972da7a250fe2_3f7a349a

  Table of contents preceding:

  Version = 1

  EventType = APPCRASH

  EventTime = 130777269154662904

  ReportType = 2

  Consent = 1

  ReportIdentifier = fe48f787-092F-11e5-b5e4-00505695e34e

  IntegratorReportIdentifier = fe48f786-092F-11e5-b5e4-00505695e34e

  WOW64 = 1

  1. Response.Type = 4

  SIG [0]. Name = name of the Application

  SIG [0]. Value = pcoip_server_win32.exe

  GIS [1]. Name = Version of the Application

  GIS [1]. Value = 3.30.0.50438

  GIS [2]. Name = timestamp of the Application

  GIS [2]. Value = 54d1c88a

  GIS [3]. Name = name of the Module fault

  GIS [3]. Value = NvFBC.dll

  GIS [4]. Name = Fault Module Version

  GIS [4]. Value = 6.14.13.4752

  GIS [5]. Name = Fault Module Timestamp

  GIS [5]. Value = 54d3ad55

  GIS [6]. Name = Exception Code

  GIS [6]. Value = c0000005

  GIS [7]. Name = offset of the Exception

  GIS [7]. Value = 00002474

  DynamicSig [1]. Name = OS Version

  DynamicSig [1]. Value=6.1.7601.2.1.0.256.48

  DynamicSig [2]. Name = locale ID

  DynamicSig [2]. Value = 2057

  DynamicSig [22]. Name = additional Information 1

  DynamicSig [22]. Value = 0a9e

  DynamicSig [23]. Name = additional Information 2

  DynamicSig [23]. Value = 0a9e372d3b4ad19135b953a78882e789

  DynamicSig [24]. Name = additional Information 3

  DynamicSig [24]. Value = 0a9e

  DynamicSig [25]. Name = additional Information 4

  DynamicSig [25]. Value = 0a9e372d3b4ad19135b953a78882e789

  UI [2] = c: Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  UI [5] = check online for a solution (recommended)

  UI [6] = check for a solution later (recommended)

  UI [7] = close

  UI [8] = PCoIP Server has stopped working and was closed

  UI [9] = a problem caused the application to stop working correctly. Windows will notify you if a solution is available.

  UI [10] = & close

  LoadedModule [0] = c: Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll

  LoadedModule[2]=C:\Windows\syswow64\kernel32.dll

  LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll

  LoadedModule [4] = c: Files\VMware\Teradici PCoIP Server\inputdevtap.dll

  LoadedModule[5]=C:\Windows\syswow64\ADVAPI32.dll

  LoadedModule[6]=C:\Windows\syswow64\msvcrt.dll

  LoadedModule[7]=C:\Windows\SysWOW64\sechost.dll

  LoadedModule[8]=C:\Windows\syswow64\RPCRT4.dll

  LoadedModule[9]=C:\Windows\syswow64\SspiCli.dll

  LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll

  LoadedModule[11]=C:\Windows\syswow64\USER32.dll

  LoadedModule[12]=C:\Windows\syswow64\GDI32.dll

  LoadedModule[13]=C:\Windows\syswow64\LPK.dll

  LoadedModule[14]=C:\Windows\syswow64\USP10.dll

  LoadedModule[15]=C:\Windows\system32\Secur32.dll

  LoadedModule[16]=C:\Windows\system32\WTSAPI32.dll

  LoadedModule[17]=C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCR90.dll

  LoadedModule [18] = c: Files\VMware\Teradici PCoIP Server\svgadevtap.dll

  LoadedModule[19]=C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCP90.dll

  LoadedModule [20] = c: Files\VMware\Teradici PCoIP Server\libidn.dll

  LoadedModule [21] = c: Files\VMware\Teradici PCoIP Server\pthreadVC2.dll

  LoadedModule[22]=C:\Windows\syswow64\WS2_32.dll

  LoadedModule[23]=C:\Windows\syswow64\NSI.dll

  LoadedModule [24] = c: Files\VMware\Teradici PCoIP Server\VMwareResolutionSet.dll

  LoadedModule[25]=C:\Windows\syswow64\SHELL32.dll

  LoadedModule[26]=C:\Windows\syswow64\SHLWAPI.dll

  LoadedModule [27] = C:\Windows\syswow64\PSAPI. DLL

  LoadedModule[28]=C:\Windows\syswow64\CRYPT32.dll

  LoadedModule[29]=C:\Windows\syswow64\MSASN1.dll

  LoadedModule[30]=C:\Windows\system32\dbghelp.dll

  LoadedModule [31] = C:\Windows\system32\IPHLPAPI. DLL

  LoadedModule [32] = C:\Windows\system32\WINNSI. DLL

  LoadedModule[33]=C:\Windows\syswow64\SETUPAPI.dll

  LoadedModule[34]=C:\Windows\syswow64\CFGMGR32.dll

  LoadedModule[35]=C:\Windows\syswow64\OLEAUT32.dll

  LoadedModule[36]=C:\Windows\syswow64\ole32.dll

  LoadedModule[37]=C:\Windows\syswow64\DEVOBJ.dll

  LoadedModule[38]=C:\Windows\system32\WINMM.dll

  LoadedModule [39] = C:\Windows\system32\IMM32. DLL

  LoadedModule[40]=C:\Windows\syswow64\MSCTF.dll

  LoadedModule[41]=C:\Windows\SysWOW64\vmwsci.dll

  LoadedModule[42]=C:\Windows\syswow64\profapi.dll

  LoadedModule [43] = c: Files\VMware\Teradici PCoIP Server\pcoip_crypto_non_fips.dll

  LoadedModule[44]=C:\Windows\system32\WSOCK32.dll

  LoadedModule[45]=C:\Windows\system32\CRYPTSP.dll

  LoadedModule[46]=C:\Windows\system32\uxtheme.dll

  LoadedModule[47]=C:\Windows\system32\rsaenh.dll

  LoadedModule[48]=C:\Windows\system32\dwmapi.dll

  LoadedModule[49]=C:\Windows\system32\mswsock.dll

  LoadedModule[50]=C:\Windows\System32\wshtcpip.dll

  LoadedModule[51]=C:\Windows\system32\NLAapi.dll

  LoadedModule[52]=C:\Windows\system32\napinsp.dll

  LoadedModule[53]=C:\Windows\system32\pnrpnsp.dll

  LoadedModule[54]=C:\Windows\system32\DNSAPI.dll

  LoadedModule[55]=C:\Windows\System32\winrnr.dll

  LoadedModule[56]=C:\Windows\System32\wship6.dll

  LoadedModule[57]=C:\Windows\system32\rasadhlp.dll

  LoadedModule[58]=C:\Windows\System32\fwpuclnt.dll

  LoadedModule [59] = C:\Windows\system32\dhcpcsvc. DLL

  LoadedModule [60] = c: Files\VMware\Teradici PCoIP Server\pcoip_mfw.dll

  LoadedModule[61]=C:\Windows\system32\VERSION.dll

  LoadedModule[62]=C:\Windows\system32\CRYPTUI.dll

  LoadedModule[63]=C:\Windows\system32\ntmarta.dll

  LoadedModule[64]=C:\Windows\syswow64\WLDAP32.dll

  LoadedModule [65] = c: Files\VMware\Teradici PCoIP Server\ViewMMDevRedir.dll

  LoadedModule[66]=C:\Windows\system32\credssp.dll

  LoadedModule[67]=C:\Windows\SysWOW64\msv1_0.DLL

  LoadedModule[68]=C:\Windows\system32\cryptdll.dll

  LoadedModule [69] = c: Files\VMware\Teradici PCoIP Server\VMwareView - RdeVchanStub.dll

  LoadedModule [70] = c: Files\VMware\Teradici PCoIP Server\pcoip_vchan.dll

  LoadedModule[71]=C:\Windows\system32\apphelp.dll

  LoadedModule[72]=C:\Windows\system32\ncrypt.dll

  LoadedModule[73]=C:\Windows\system32\bcrypt.dll

  LoadedModule[74]=C:\Windows\syswow64\USERENV.dll

  LoadedModule[75]=C:\Windows\SysWOW64\bcryptprimitives.dll

  LoadedModule[76]=C:\Windows\system32\GPAPI.dll

  LoadedModule [77] = c: Files\VMware\Teradici PCoIP Server\audiodevtap.dll

  LoadedModule[78]=C:\Windows\Syswow64\NvFBC.dll

  LoadedModule[79]=C:\Windows\system32\d3d9.dll

  LoadedModule[80]=C:\Windows\system32\d3d8thk.dll

  LoadedModule[81]=C:\Windows\system32\nvapi.dll

  LoadedModule[82]=C:\Windows\system32\nvd3dum.dll

  LoadedModule[83]=C:\Windows\system32\powrprof.dll

  FriendlyEventName = Stopped Working

  ConsentKey = APPCRASH

  AppName = Server PCoIP

  AppPath = c: Files\VMware\Teradici PCoIP Server\pcoip_server_win32.exe

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: fe48f786-092e-11e5-b5e4-00505695e34e

  Display state: 4

  Check out this post on the forum.

  VMware View 6.1 Zero-Client disconnect

  Newer drivers are available on the NVIDIA site to the link NVIDIA DRIVERS NVIDIA GRID VGPU SOFTWARE RELEASE 346.68/348.27 WHQL

  Only Windows drivers are updated and need to be updated. ESXi pilots remain the same.

• Implementation of remote offices, VMware ESXi

  Hi people, I hate you bug with what he could have been asnwered before, but I couldn't find an asnwer very clear here. Any help/advice is much apprecaited. So, here's the deal:

  We plan blown full virtualization (Server + VDI) to our datacenter and 3 remote sites. Data Center (HQ) and 1 remote office are located in Europe, 1 in North America and 1 Office in Hong Kong. All remote sites are with about 5 to 10 local non computer users. HQ has about 90 users and staff. Clearly, we want to put everything in place so that it can be managed on the Wan. We will make IPsec VPN site-to-site with each remote site through Cisco ASA and ISR routers/appliences.

  In HQ, we implement the Server Blade HP (chasis c7000) of several ProLiant G7 and EMC Clariion CX4 storage.

  For remote offices, we plan to have a local server (2 CPUs) and local storage. Internet connections are good DSL, but nothing complicated. On the road, we could look at MPLS in the light of the video and voice conference, but for now it's off the table. Because we want to deploy VDI in remote offices, we want to have clones the on local servers so that they are independent of WAN. We run a file sharin, DC, print server in terms of orders OS Server mainly.

  1. How is back-up to be managed from remote desktop to virtual offices at Headquarters? You can just save changes/deltas or is it always?

  2. what type of products VMware, we need in remote offices? VSphere Standard would do for everything what we need (remote management, backup remote VM etc.)?

  3. is it possible to have remote users forwarded to use their VD through the WAN of local server failure? Software that manages this part?

  4 any other recomendatiosn or best tips in our case here?

  Thanks again for any advice you have as we are very pleased to start this, but sure looks like a lot of work... and a few uncertainties.

  Jim

  Hello

  1. How do you distribute patches and OS updates to the remote VDs via WAN?

  You can use AUVS to install packages in the comments. In this way, everything is done on the spot.

  2. with a ThinApp structure in a VDI infrastructure how do you deliver applications, their patches to remote desktop (stream or MSI or?)? You have to have ThinApp servers etc. at the remote office or what is really the best way to handle this?

  ThinApp is a bit different and has their servers for the deployment of ThinApps. I think you should transfer as you ThinApps the patch... You can ask this question in the forums ThinApp.

  3. does anyone know a really good guide to set up an "office in a box" and it deployment?

  I have unfortunately seen documents for internal use. However, ones I've seen are usually at least 1 usually 2 boxes 2U with necessary storage locally or on a NAS with at least Gigabit switch. Usually, I suggest at least 2 boxes depending on the load. Ideally something easy to carry and move... If there was a 2 or 4 blade blade chassis, which would be the ideal...

  All licenses is managed at the Headquarters Office "in a box" being shipped to the remote desktop that is almost ready to go. A few tweaks remote and viola, you have the office. Don't forget to leave you an administrative VM on a VPN tunnel to your desktop to the remote location.

  Worst case scenario involves some generic desktop computers at HQ for all applications that do not need local data.

  4. licenses for virtual desktops (VMware View) must be purchased by the local office, or by given headquarters he is managed by vCenter HQ and the fact that it is on another continent?

  It's really up to you. But if it was me I would centralize management and "Chargeback" with the Agency.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, 2010

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• Restart VCS without session disconnection?

  Is it possible to ensure that I can restart my sight connection to the server without causing my client sessions disconnect?

  -Gunnar

  Right - I figured this out.  The parameter is NOT the global setting, I did reference.  It's purely for the initial connection view client to server before the actual creation of the session.

  The desired setting is under configuration, servers - change the settings of the server down and tick the box enable "direct connections on the desktop.  Just tested with RDP and PCoIP and works a treat.  Session remains open if I restart the management server connection.

  Reno

• VI on a BladeCenter S for remote offices

  Hi everyone, it's a matter of design because I don't know much about BladCenter S.

  After reading this article, I become curious of this technology (http://it20.info/blogs/main/archive/2008/11/14/162.aspx) because it really can solve some problems, especially in remote offices.

  My questions are:

  (1) is the redundant eth switch? Article that I linked above, it seems that it is but to read the IBM documentation looks that all EPF blades are related to bay1 only, so only one switch eth (which would make not much sense);

  (2) is the internal memory, support for vmware? Could not find information on that, nor what hw config is required to share LUNS with blades;

  (3) is it possible to have 4 network adapters and interfaces 2 sas (from FC interfaces for it matters) without developing the blade server? I can't expand the blade increases the number of cards you can add but then each blade will take twice as much to place in the chassis, which is not good in a small bladecenter as the S

  I suppose to use HS21 XM blades just like I would on another chassis. Ibm documentation I found here (http://www.redbooks.ibm.com/abstracts/sg247523.html) and here (http://www.redbooks.ibm.com/abstracts/sg247682.html?Open) was very detailed, but confused about what I mentioned in my questions.

  Yes, ETH that a switch can be used, but then you get only half of the network connections.  Each blade is divided between the i/o modules, so if you have expansion for the blades ethernet card, and only have 1 switch, and then you get only half of the available network adapters.

  The IBM SAS HBA card is in the HCL: http://www.vmware.com/resources/compatibility/search.php?action=search&deviceCategory=io&productId=1&keyBasic=ibm+sas+&maxDisplayRows=50&key=ibm+sas+expansion&release%5B%5D=-1&datePosted=-1&vid=&did=&svid=&ssid=

  And Yes, I believe the extension ethernet 2 ports and the sas of maps extension and in a format that can fit into the PCI - X slots without the blade who need to take two slots, according to the guide.  I'm sure your IBM representative can go over this with you as well.

  -KjB

• Windows 7 hangs after successful Remote Desktop Session

  I have a dual boot Media-PC with XP Pro and Windows 7 Ultimate edition. This PC is part of my stereo and not convenient to do lot of keyboard work, as optimizing the WMP music library.

  Thus, historically I use XP Pro using remote desktop sharing. This brings well the contact Office of the Media-PC to my laptop. When I finished with my combination of media-computer, I connect to the PC Media. The laptop Remote Desktop connection breaks and the PC Media connects...
  I just installed Win 7 Ultimate and got the remote desktop connection works if I can bring my Win 7 Media PC interface to the laptop. Works very well. However, when I connect to the PC Media, to complete connection RD, basically the system hangs during the process of the Media PC connection... I waited 15 minutes and not able to connect. I have voltage in order to regain control of the PC...
  ... Anyone know what is happening?
  I hope you can help

  I found that if I explicitly lock the computer before shutting down my terminal session (actually unplugged), so I'm able to get a login screen when I arrive at my physical office.  If I disconnect without locking, then the screen is blocked.

• Permission issues key on the remote desktop session host server

  Morning all,

  I tried to fix a few problems that we wanted on our new Office Server remotely.

  This is a new server that we have put in place a few days ago and is now on the site in a remote and ready to leave office.

  We moved a few users on the server yesterday to begin to test it, but met with some major problems that we have not seen before.

  Server 2008 R2 and is the host of the session, and server roles installed licenses, as well as services (search and file server roles) of the file.

  The problems we have are:

  • Trying to configure Outlook 2010 exchange account using the automatic configuration, we get the error code: 0 x 80070057
  • When you open MS Word, we get: "your AutoCorrect file, \MSO2057.acl, could not be saved. The file may be read-only, or you do not have permission to modify the file.
  • When Word is closed, we get: "cannot save or create this file. Make sure that the disk you want to save the file on is not full, write-protected or damaged. (C:\normal.dotm)
  • Some users have managed to get their Outlook account settings, but get the same error code in the point 1, when you try to open or to move an e-mail message
  • Windows search is also a problem, as in the start menu search returns no results, and clicking on "see more results" gives an error: Windows cannot access the specified device, path or file. May not permissions to access you the item.

  First impressions, wherever the registry for AppData folders by user settings, have not been defined properly, which means that files that are trying to write, try saving in the wrong place.

  I didn't know how to check this in the registry, but all the environment variables look be ok compared to our running Server 2008 R2 RD.

  If anyone can offer suggestions or advice, that would be greatly appreciated.

  See you soon

  EDS

  Hey Eds,

  Thanks for posting in the Microsoft Community.

  However, the question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads