Guests of dashboard page

Similar Questions

• Separate guests for each report to a dashboard page

  Hi all

  Can you have different guests on the same page of dashboard for different reports on the same columns. For example, my dashboard page has 2 reports and I need

  Invites different on each report. Each report is based on 2 diff, SA1 and SA2 themes.

  I build separate guests on generic columns like name and period of the invoice to the customer which are present in the two areas.

  Both areas contain few shirts of presentation with the same name, i.e. the customer, contract, invoice, etc. If I take columns with the same names,

  for example, 'customer name' or 'contract ID' of these records, I observed that the guests are applied to the two reports.

  It remains the same even if I create separate presentation variables in reports. OBIEE allows this feature to have

  different guests on columns with same name.

  Thanks in advance

  Yada.

  This can be achieved using the Variable guests most frequently used guests from the column. There I created a variable and used presentation even in the filters in the analysis.

  Thank you!

• Issue of rapid spread across multiple dashboard pages in a dashboard

  I have a problem of rapid spread in a dashboard, i.e. guests dashboard page of different using the same column of presentation layer then the guests take the filter value filters on the dashboard of each other. Even if I try to change the scope of each guest to dash for a dashboard page that value only spread to the next page of dashboard.

  I can't redevelop the whole dashboard, it will take a lot of effort, I implemented a solution for now, but I'm looking for some script code java I could invoke using the OnPageLoad event to clear and reset that all the page invites you to default values.

  Can you guys let me know if you have any java script like this.

  I found the question, the reports have been migrated to OBIEE 10 g long back. I have all redesigned reports and dashboard page only the value of the scope and reports work properly. Thanks for all your support guys.

• Guest of dashboard

  Hello

  I have 3 pages in dashboard.page 3A page 1, 2 data with quick selection and when I click on the hyperlink on page 1 it should take me to a page 3 in the dashboard with values prompt but without having to select the guest once again, it should default to the first data page in the dashboard.

  I can't select the quick drop down value once I click on the link, it must be in default.

  Any ideas?

  Thank you in advance.

  Based on what I understand of your question... It seems that you want to run the report without selecting the prompt to Page 3, but want to click on a hyperlink to Page 1 to run the report in Page 3.

  If this is correct...

  You have an option called "Create the link invited" in the properties of the dashboard window. You can create a link prompted and use the URL of the hyperlink on Page 1...

  If this isn't what you're looking for, then please explain your question in detail...

• Export the dashboard or dashboard page

  Hello
  
  Is it possible that I can export the whole dashboard also a dashboard page. Please notify.
  
  Thank you
  Ravi

  Hi Ravi,

  There is also another book autour to export the complete dashboard to PDF page. In the dashboard page goto Page Option--> Print--> printable PDF. This option will export all of the report as well as the guest of dashboard to PDF.

  Thank you
  Stephanie

• Question of guests in dashboards

  Hi all
  
  We have a problem in the dashboards.
  
  We have five dashboards for the project accounting module.
  
  For all five dashboards, we have five different guests. For a couple of guests, we have selected default values and this varies between guest a dashboard to another.
  
  Now the question is, when the user navigates in a dashboard to another, assuming that from 1st to 2nd, the 2nd guest of dashboard takes the dashboard 1 values prompt as value by default even if this isn't what we have selected as default. Why is this happening?
  
  Ex: Gel is the guest of the dashboard and we have two values 'February 20, 2012'-'March 15, 2012' as values.
  (1) dash 1st time values were chosen as default values for the user.
  (2) for 2nd dashboard only 'March 15, 2012' has been set to the default value.
  
  However when the user navigates to the 2nd dashboard, dashboard 1 values appearing as default which should not happen.
  
  Hope my explanation is clear, can someone help me on this.
  
  Regds
  Mano

  You can try, on your dashboard guests change the scope of "Dashboard" to "Page".

• Variable session and only for a dashboard page

  Hello experts!
  
  I have a mission to do.
  
  My client wants to, in a specific dashboard page, see the current year in the guest of the year.
  
  So... in this page, I have a prompt of the year (the user can choose different years, 2009; 2010...)
  
  My client wants the guest of the year has been chosen by the current date, in our case, our default Guest, in 2011.
  
  My database is SQL Server and oracle directors I've created an inizialitation with this code block: SELECT (YEAR (get_date ()) <-Returns current year.) Then I created a dynamic variable and I put a default initialization with 2009.
  
  When I go on my dashboard page... I have two problems:
  
  (1) I don't see 2009 in all the pages of the dashboard. (I see only in a specific page)
  (2) I see 2009 instead of 2011 (current year)
  
  If I put a default initialization with 2011 I see 2011 in guests... but next year I'm having the same problem... I still see 2011...
  
  Any help?
  
  Thank you!!

  Yes, change the scope of guest to just the Page and NOT the dashboard AND create 2 separate guests for pages. I mean a curr year and one for a specific year

  Published by: Deepak Gupta on October 7, 2011 00:43

• Go to the dashboard Pages...

  Experts-
  
  I have a requirement where in... I have a main report, the report of Sub - 1, sub - 2
  
  I have a Master Page in pension DAHS with guests and a main report.
  
  When I click on a column of the report (I set sail in the property of the column to another report). He must think I'm a part of detail where it has two sections, first section should have a report (sub - 1) and the second section must be lower than the first article and has to do more. (sub - 2 ratio)
  
  I activated navigate feature in a column of the report main page in dashboard...
  
  But I could place only a single report in the detail section.
  I do not know how to place the second report under the first report in the detail section. I need all the guests/presentation variables must be passed on to my all subreports.
  
  Help, please!
  Thank you!

  HI user

  Create a page with same guests (as in the homepage) and subreports and hide the page. In the column homepage main report gives the navigation to this dashboard page. On this page give columns requested and scope of the prompt in the dashboard. Hope it resolves your problem

  Thank you
  Disney

• Date number of Format for date fields in dashboard pages.

  We have two guests of field date in our dashboard pages for which we need to show the default values.
  The SQL logic, we used for this is:
  
  Select case when 1 = 2 then "time Dim - effective". Day of another cobalt current_date
  
  When you click on the Preview button, the command prompt displays the current date in the format MM/DD/YYYY value.
  But when the same prompt is placed in the dashboard page, its projection upwards to the YYYY-MM-DD format.
  And when we choose the date in the calendar in the dashboard, the format is DD/MM/YYYY which is as expected.
  If we want the values by default also to be shown in the format MM/DD/YYYY.
  How can this problem be solved...
  
  Thank you
  Swetha

  Hi Swetha,
  Create a variable of the server default for this server vairable guests with this sql SELECT To_Char(SYSDATE,'MM-DD-YYYY') FROM dual (instead of sysdate, you can use your date column)

  Thank you
  saichand.v

• Reset the filter prompt when you navigate to the dashboard Page

  Hello world! Came across this bizarre situation when navigating from a source of report a target and then dashboard page topic to another page of dashboard. It seems that the prompt value filters are enabled on each succeeding because of this dashboard page.
  
  Scenario as follows:
  
  I have a report from the source
  
  Item ID * State * Contact
  12345 * open * SomePerson
  
  If I click on SomePerson (value Navigation Drill-Down), it takes me to a dashboard Page that has Contact = SomePerson applied filter, which works as expected.
  
  But now, when I go to all the other pages of the dashboard, both the status = open and Contact = SomePerson are applied to all views. Is there in such a way that by clicking on the dashboard Page tab would also default reset all filter values prompted since the guests?
  
  Thank you! I learn a lot here. Any help would be appreciated.

  Hello

  What is there in the other pages of your quick dashboard...
  According to my understanding of your question...
  you make the scope of the dashboard page guest

  OR

  You can turn off the guests before selecting anything...
  Follow this... http://obiee101.blogspot.com/2008/08/obiee-making-clear-button.html

  Thank you & best regards
  Kishore Guggilla

• Hide Dashboard icon edit on the top right of the dashboard page

  Experts,

  Is it possible to hide dashboard icon change completely from the dashboard page.  We want to disable all controls as 'export to excel', claire my customization ', 'Add to briefing book' etc a bit of links on a page of particular dashboard hide dashboard icon change itself.  Any input is apprecieated.

  OBIEE Version: 11.1.1.9.x

  Kind regards

  LIBERATOR

  So, if it's for a dashboard and you really want to do it... it's easy.

  Don't forget that OBIEE is a Web application, this means that the front-end server is just a web page and the best way to define how something is visible (or how to hide) is CSS.

  Often, people think that JavaScript is the solution when ultimately, you do not want to disable the links etc, you want to just hide (if users do not see where to click to get the menu they will never be able to use the menu).

  So, using the developer of your browser toolbar if you inspect the code of the page and you discover that Oracle has been quite nice to assign an ID to the element where you can click and the menu, so all you need is a few lines of CSS:

  PS: in case this helps or is the answer to your question please make sure you close the marking thread which is necessary, in order to you help others with the same or similar questions.

• Guests of dashboard does not not for some table

  Hello world

  I'm on OBIEE, the latest version and I was faced with a problem with the guests of dashboard.

  The schema is built progressively to the RPD. It's all in one area.

  I created a quick dashboard for the "Global ID" and the "Time range" using between operator.

  Guests of dashboard has worked for first two analysis I built. However, I have added a new table to the diagram and apply the same guests of dashboard, but it does not work.

  However, if the use of filters for the dash prompt and hardcode the Global guest and time range, I get the result.

  I still don't understand as to why the guests of dash wouldn't work for this analysis.

  I was able to use a variable presentation for the GlobalID from the dash prompt, and that seemed to work. But it does NOT for the time range.

  Appreciate any understanding to solve the problem.

  Hello

  I think that it doesn't work because of the type of data that you use in the time column.

  Try the following:

  1. create a calculated column in the concatenation of the year and the month of the RPD

  Example: mount (trim (cast ("YEAR" as char)): trim (cast ("MONTH_ID" as char)) under the number)

  change the fields of the YEAR and MONTH_ID to their respective

  2. replace your prompt 'slot' for this calculated column

  3 - in the analysis replace this column in the filter applied to the parameterization.

  As we are now working with the number data type, we can do between.

  Hope this helps

  Felipe Idalgo

• Display the default value between Dates in guest of dashboard

  OBIEE 11 g
  
  My users would say the default values shown in my dashboard of the guests. So far, I have created a guest of Dashboard using between operator for dates between CURRENT_DATE - 7 and CURRENT_DATE through SQL results. However, when the dashboard is running the date fields are blank and have not of these dates. Does anyone know how to get these to display. Thanks in advance.

  Instead of current_date-7 you can try with timestampadd(SQL_TSI_DAY,-7,current_date) and
  TIMESTAMPADD(SQL_TSI_DAY,0,CURRENT_DATE)

  It should work.

• Dashboard page is not able to access using URL

  Hi gurus,
  
  I have dashboard page that starts with 2 multiple spaces ("dashboard page"), I am trying to access this page using the url link, I am getting error in the invalid path. I tried this links below both give me the invalid path.
  
  1. < font color = "refractory" > < = 2 font size >
  < a*href="/analytics/saw.dll? Table edge & CheminPortail = / Partageent records/Topic1/tables of edge/dashboard & Page = dash1 "> < b > click here for a printable view < /b > < / has > < / has > < * / make >"
  
  -It has 2 places
  2 1. < font color = "refractory" > < = 2 font size >
  < a*href="/analytics/saw.dll? Table edge & CheminPortail = / Partageent records/Topic1/tables of edge/dashboard & Page = dash1 "> < b > click here for a printable view < /b > < / has > < / has > < * / are >-without space..."
  
  I use the ('* ') can have the URL link.
  I get the below error
  
  Path not found (/ Shared Folders/Topic1/tables of edge/dashboard page/dash1)
  Error details
  Error codes: U9KP7Q94
  
  Please help me. Thanks in advance...
  
  Concerning
  @li
  
  Published by: @l * Sep 17, 2012 18:12
  
  Published by: @l * Sep 17, 2012 18:13

  Can mark you as correct

• As a guest of dashboard column Chooser

  Hello
  
  My requirement is to have the column as a guest of dashboard selector.
  
  Example:
  With the three year period prompt options, month, quarter as radio button.
  
  -> If I select the month I have to get the wise chart months and
  -> if I select year to me year wise.
  
  Thanks in advance.

  Hi RR,.

  GoTo column period in the criteria tab, click on change the formula and use the presentation as varaible

  "Table name logic '." "@{Presentation_variable} '{Default_value}.

  For example: "Sun time". "' @{v_period} {month}."

  Save your report.

  Run the dashboard.

  You can see the chart change according to your prompt value.

  Try this...