Similar Questions

• IP address of server blades management

  Hello

  Could someone please help me know which path is followed to reach the ip addresses of the server blade chassis management? To be more precise, to say that I have the management interfaces of interconnections connected to the switch network management of my fabric. When I ping addresses it ip of the blades, that ping through the management interface of the FIs management? Can I assign different subnet IP subnet Management Server as the FI management interfaces?

  Also, could someone share a document illustrating this architecture?

  Thank you

  Quesnel

  Hi Quesnel

  Let's be very clear: IP address management blade = IP address of the MMIC, you can for example. access by the KVM.

  There are 2 modes:

  - out of band which is accessible on port 1 G of the interconnection of fabric management

  - in the band which is accessible via a fabric interconnect 10 G uplink interface

  See the discussion in

  https://supportforums.Cisco.com/discussion/12185011/management-blades-OU...

  Management in-band MMIC

  A determinant to provide access management in-band for integrated management Cisco (CIMC) controller is the desire to separate traffic treated tenant provider cloud for service provider deployments shared, public or private. Out of band (OOB) management traffic is at the fabric of interconnections and cross management via the management port. This has the potential to cause bottlenecks and affect the bandwidth of the processor in the management ports.

  In-band management allows MMIC traffic to take the same path as the data traffic into and out of the fabric of interconnections via the uplink ports. The highest bandwidth available to the uplink ports means that inband access greatly accelerates the management traffic and reduced risk of bottlenecks and the stress of CPU. When out of band (OOB) and inband address pools can be configured for access to the administration in Cisco's UCS Manager. Out-of-band access only supports IPv4 addresses. Access inband supports IPv4 addresses and IPv6, which allows a management single or double stack.

  The two addresses of OOB management interface that can be configured in Cisco UCS Manager blade and rack servers are:

  • An OOB IPv4 address assigned to the physical server via the pool global ext-mgmt
  • An address IPv4 OOB derived from a service associated with the physical server profile

  In addition, up to four inband management interface addresses can be configured:

  • A tape attributed to the physical server IPv4 address
  • An IPv4 address of inband derived from a service associated with the physical server profile
  • An IPv6 address band attributed to the physical server
  • An IPv6 address of inband derived from a service associated with the physical server profile

  Several in-band for each server management IP addresses take additional sessions of CIMC. When you configure the OOB, and strip addresses, users can choose from a list of these addresses in the KVM Console dialog box when they launch KVM from a server, SSH to the ground, a service profile, the KVM Launch Manager or Cisco UCS Manager GUI web URL.

  MMIC inband access supports the following services:

  • KVM console

  • SSH to MMIC for soil

  • vMedia of ISO, virtual CD/DVD, removable disk, floppy drive

  Note	Only Cisco UCS M3 and M4 servers support access in-band MMIC. Access Inband MMIC for Cisco UCS M1 and M2 servers is not supported.

• Is it possible to make Internet connection sharing by the command line rather than the GUI on Windows Server 2008?

  Hello world!

  I need program/reset sharing Internet connection by the command line rather than GUI tools under Windows 2008 Server (could be a .cmd to run startup script or the programmer). Is this possible? Or there is some registry keys I need to set/restore and restart some services?

  Thank you very much.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the TechNet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Question about encryption keys for TP server 8710

  I'm discovering the activation process of encryption keys for my telepresence server clusters.

  I know that we need this encryption key (L-AESCDN7-K9).  We need one per frame, or one per blade?

  The encryption key is installed directly on each Blade Server, as you would apply the key to each of them.  Each server blade has its own twist.

• Server Blade ASYNC / threshold of passage / hardware verification

  Hey people,

  strange things occur yesterday evening. I bypassed about 120 messages "threshold crossed: CAW: etherTxStats...» "and"IO Module Warning.

  I looked in the events of UCSM. Each server blade in our UCS started a WSF. What is a routine of UCS? We do not know what is happening. All the 32 ESXi 5.5 blade server. It has not changed anything.

  Events of WSF see attached file. I have filtered all the events of 'jumps '. To me, it seems that MMIC began the new inventory for all servers? Do you know something about this or have the same events? Is there a scheduled task internal UCS?

  UCS version 2.2 (3f) (all systems = same beam of firmware; UCSM, FIs, blades...)

  Thank you very much

  / Hugo

  It would be interesting to have a look at the audit logs around that time and DME (data base management Enginer) to see what is really happening... You better open a case of TAC and then post the result here for future users faced with the same question it will require a deep investigation of the newspapers before we a tell you what/why he happeed.

  -Kenny

• iCloud for windows server

  Hello

  I want to iCloud for windows server

  TNX

  Hello aminicpa,

  Thank you for using communities of Apple Support.

  If I understand your message you are trying to download iCloud for Windows.  As it is a tool designed for a personal computer, there is only one version.  To get instructions on iCloud for Windows download, take a look at the instructions in the link below.

  Download iCloud for Windows

  Have a good.

• my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  HOPE TO HEAR SOME ADVICE PLEASE :)

  1) go in your user library folder (~ / library). Hold down the option/alt key while accessing the menu Finder go.

  2) go to the calendar folder

  (3) delete all files that say "cache" (replace the your desktop in the case where you want to move them at least)

  (4) always in the user library folder, go to the Preferences folder

  (5) delete the com.apple.calendar.plist (on the desktop again)

  (6) restart your computer

• Definitions for Windows Server 2008

  Hello!
  I was looking for definitions of toshiba for windows server 2008, and then I realized that there are no definitions for windows server 2008.

  So if someone knows how to fix this please let me know.

  You are right. Support Toshiba doesn t Windows Server 2008 and as a result you will not be able to find any Toshiba statement associated with this OS.

• Satellite L650D - need drivers for Win server 2008

  Laptop model: Satellite L650D-PSK1SA-03E014

  before that I installed win7 32 bit OS.

  Now I want to change to 64-bit, but he says still no startup disk after the completion of copy and restart.
  I use the recovery disk that I burned after that I bought and used the System Restore Wizard.

  So I decide to install win Server 2008 r2 64-bit, installation is successful, but some hardware drivers can be find and install from the Web site.
  (I use win7 64-bit drivers, I read online, a guy said that it works on his laptop, but do not know why it does not work for me.)

  should I take the laptop to the support center and ask them to install the drivers for me?
  I'm not sure that this service is covered by the warranty or not.

  Or I can ask them to install win7 64 bit OS for me?

  Does anyone have the link to the drivers for win Server 2008 r2 64-bit?
  Thank you very much!

  As much as I know Win server 2008 is not supported by Toshiba, so you will not be able to find the drivers for it. Toshiba offers support for OS preinstalled only and possibly an upgrade if your laptop model is supported for the new OS.
  Warranty has nothing to with Win server 2008 so I think that guys will not be helpful for you. What they can do is to check if the original recovery image can be installed or not. If this is not the case, there may be a hardware problem.

• Need driver LAN for 2008 server 64 bit - Tecra 10 M (PTMB3A)

  Hello

  Having a devil of a time trying to install the 8257 lm intel LAN driver (found on the website of intel) for 2008 server 64-bit, that is to say LAN card not detected but it is operational in XP so I don't know its good. There is also no driver of LAN 64-bit Vista listed on Toshiba Aus site for this model.

  Has anyone overcome the Please this problem?

  Hello

  Tecra 10 M is designed for "2008 server 64-bit?

• HP Deskjet Adv 2060: Driver for HP Deskjet Adv 2060 for Windows Server 2008 x 64. ?

  Hello

  I have a desktop PC remotely with Windows Server 2008 x 64.

  I tried and still can't get a driver for my HP Deskjet Adv 2060, so I can't print in my house.
  
  May I ask if there is a compatible driver for HP Deskjet Adv 2060 for Windows Server 2008 x 64. ?

  Thank you very much.

  Ryan

  Hey Ryan,

  This kind of low printers end support client operating systems only, it supports all print server OS or Citrix or RDP.

  You can find the printer specifications below, only the operating system on the system Rquiredments are supported:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-3183-all-in-one-printer-series---K1/4157434/model/4157334/document/c02063036/

  Kind regards

  Shlomi

• Color LaserJet Ent M553dn: HP Laserjet Enterprise M553dn PCL6 x 64 drivers for Windows Server 2003

  Just bought a HP Laserjet Enterprise M553dn and was able to install the drivers for Windows Server 2003 x 86 driver disc supplied with the printer, but I cannot locate the drivers for Windows Server 2003 x 64.

  I checked the site hp.com, but what they have there is PCL5 x 64 drivers, which gives me a 'printer driver is not installed. Message operation could not be completed.

  Just for fun, I tried to download the drivers for PCL6 Windows 7 x 64, and trying to set up the printer with these, but it gives me a message "Windows is unable to locate a suitable printer driver.

  Where can I find the Windows Server 2003 PCL6 drivers x 64?

  Thank you!

  As any pcl6 driver will work, why not just load any pcl6 64-bit driver that is built into the operating system.  Simply choose hp on the left and choose any color laserjet 64-bit driver on the right.  If none is available, download the driver 64 bit hp universal pcl6.  When loading the driver do not have system autodect the printer but load the driver manually.

• Office Jet pro 8610: Office Jet pro 8610 for windows server 2008 R2

  I got the new Office Jet pro 8610 prither but does not have the driver for "Windows Server 2008 R2 Enterprise" 64-Bit.

  What to do now. Can you please provide?

  Thanks in advance.

  Hello

  The same driver as expected for any operating system like Windows 7 or 8 must be used, however, the installation should be launched via the command line and not as a standard installation.

  Follow these steps to install the software of the printer on a server:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8610-e-all-in-one-printer/5367603/model/5367606/document/c03351547

  Shlomi

• Wireless LAN Card for Windows Server 2003?

  Hello

  I need a fast Gigabit Wireless LAN Card for Windows Server 2003 32-bit Edition can say list the name manufacturer & model of LAN cards.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I lost the installation media for windows server 2012 std

  I lost the installation media for windows server std 2012, but I have the key. where I can download the media.

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.