GUIControl supported in readers?

Similar Questions

• Mini desktop EliteDesk 705 G1: EliteDesk 705 G1 support mini desktop NVMe readers?

  Can anyone confirm or deny that the mini desktop EliteDesk 705 G1 supports NVMe m2 disks?  I've seen mention that 800 systems G1 supports NVMe readers, but not the 705 series. The quickspecs for this DM says that the m2 is PCIe X 4, but not if the BIOS supports NVMe.

  (The G2 DM 705 record clearly indicates this. I would like the 705 plug G1 DM have been a little clearer).

  705 EliteDesk or 800 models of G1 Destop Mini DO take in HP Turbo Drive G1 SSD, which are based SATA, PCI-e cards. The BIOS of these systems do not have the ability to communicate with controllers NVME. This feature has been added to the current G2 models

  Here is the Quckspecs technology for more info

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/c04344796.PDF

  See page 46 for support (HP brand anyway) SSD cards

• Airport Extreme and USB hub

  Hi all!!

  Witch of USB hubs with printer and hard drive connected can work with last gen extreme airport?

  Witch is good, the best of the witch? Powered? No powder?

  You can use any hub powered; USB port of the AirPort Extreme provides only a limited amount of energy itself, and is not enough to support many readers.

  (142446)

• PC HP Compaq 8000 Elite: Hard drive of PC HP Compaq 8000 Elite

  I want to spend the hard drive in my 8000 Elite.  It seems that all are 6 GB/s (SATA 3) these days.  Seagate said I'm looking at that will work if my computer is not 6 G/s if the controller supports the SATA speed autonegotiation.

  question 1: what is the speed of the controller, I spent the last two hours looking unsuccessfully.

  2nd question: is this the controllers SATA speed autonegotiation support?

  Thank you!

  Vince.

  Hello:

  I'm running a Sandisk 240 GB SATA III (6.0 GB/S) SSD in my 8000 Elite CMT and it works fine.

  I used to have a 1 TB SATA III hard disk in it.  It worked very well also.

  It will only work in the SATA II (3.0 GB/S) of speed, because it is so fast that the Intel 4 series chipset will run to.

  The first 8xxx Elite business desktop PC that could run at a hard drive SATA III 6.0 GB/S pace, is the Elite 8200 series with the Intel 6 Series chipsets.

  Do not exceed a HDD 2 TB in your PC if you intend to use it as a boot drive.  The BIOS does not support the readers from over 2 TB to be used as boot disks.

• Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

  People,
  I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
  It will read fine data disks, but refuses to play with the audio CD or video DVD.

  I tried to uninstall & Re-Installing DVD - RAM Driver;
  That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
  He now just doesn't see the drive. Someone at - it ideas?

  I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

  I found a thread in this forum that describes a similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

  Sometimes this error is displayed because the player does not support the environment.
  Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

  Maybe the drive is defective and can not calibrate lens in the right position.
  But this laptop is not very old, and I can't imagine that the drive is defective
  However, nothing is impossible.

  What you can do is to carefully clean the lens and see that it will help.

• Satellite 300CDT: number of HARD disk - partitions show only 4 GB

  I have an old Satellite 300CDT, I can't support it appears not yet listed on the Toshiba site.
  I have added a new hard drive and bought a 40 GB drive, but it will only show 4 GB per partition.
  I want 2 partitions that I have and in fdisk I said 50% for each but it only shows 4GB each even though it says support big readers.
  I'm running Windows Me.
  Is it possible for an old laptop of this type to display the size of the hard drive.

  Thank you

  Hello

  Did you use the FAT32 or NTFS?
  I use partition Magic 8 to do and to manage the partitions on the HARD disk.
  In my opinion, you should try this program. I think that using the PM8 you will get the total size of the HARD drive.

• Tecra 8100: Which compatible burner CD or Combo (master/slave-settings)?

  I want to replace the internal Tecra 8100 DVD - ROM (SelectBay) against player
  a CD - RW or DVD-Combo-Drive. Which models are compatible with the Tecra 8100
  SelectBay?
  I heard that the drive MUST be in Master mode to be able to work
  with the Tecra 8100 (and most of this type of disc is delivered in slave
  setting the operating mode)?

  Thank you all in advance for the answers!

  Hello

  I put t know what parameters should support compatible readers, but I found several compatible devices:

  Drive drive TEAC CD-224th-B30 CD-ROM and DVD - ROM Toshiba SD-C2302

  Additional I found this site which drive CDRW Toshiba compatible for Tecra 8100
  http://www.getpartsonline.com/za2295p02.html

• How to remove backups Time Machine to a specific drive

  I can't find how to better use Time Machine in my situation. Here is my configuration:

  I have a 6 TB external drive dedicated as a Time Machine backup. It backs up my internal drive as well as the three external drives (A, B, C). Player "A" is always connected and is constantly supported, but readers 'B' and 'C' are linked only from time to time to archive older files.

  I recently made a few changes on the disc 'B' and left connected so it was saved, but Time Machine tells me I don't have enough room... it seems he's trying to save the whole 1.3 TB of data rather than the 15 GB or if I've changed.

  I'd like to time Machine would be just delete old backups from the 'B' drive specifically, but except that, what I would do is manually delete older backups for just the "B" drive get rid of enough space to do a new backup, but I get an error when you try to delete the files off the backups. How can I get rid of backups for a specific player?

  Thank you!

  Visit Time Machine FAQ of Pondini helps with Time Machine. You will use the Time Machine application in your Applications folder for managing backups. There is an excellent explanation on the site linked above that explains how to remove backups or backup files.

• Compatibility of drive M8020, Windows 7 64

  Hi I am trying to use a large 2nd drive, above. 2.2 TB, I upgraded the drive to an SSD of 500G, the motherboard support he, she, s a TB WD Red 4.0, thanks

  Given that your PC is a 2007 model, it is very unlikely that the BIOS has support for readers more than 1 terabyte.

• What optical drive is compatible with Satellite A30

  Hello

  Builtin of my DVD/CDRW drive A30-104 appear to be endangered (fails to climb most of the discs, just click a lot and trying / fails to turn upwards) so I need to go on the replacement of it. I have two questions:

  (1) the drive is listed as "Toshiba SD-R2412" and I found a lot of matches for this on eBay. However, some ads to mention a number of 3 additional digits (e.g., 202, 209 etc.) after the designation. -What this means and how to find the number of my disk (and is so important I)?

  (2) at - it a DVD burner available in the same form factor, and it would be likely to work with my laptop?

  Thanks in advance!

  Hello

  Additional portable players are numbers don't know about me and I don t know what it means.
  However, you should know that not all readers can be used in the notebook. The CD/DVD drive supports different master/slave/c-salt settings that are not editable and sometimes don't match with the laptop.

  This is why you should only use the readers recommended by Toshiba! As far as I know, different compatible readers are included in the user manual. Please take a look here!

  I found a support several readers. For example:
  TEAC DW-224TH
  TEAC DV-W22-85
  Toshiba SD-C2612
  Toshiba SD-R2412

  But as said above, check the user manual. All readers listed there

  Greetings

• HP Pavilion 15-e038tx laptop computer: laptop HP Pavilion 15-e038tx

  Hi, I have the laptop model HP Pavilion 15-e038tx for which I installed widows os 8 more early but now installed windows 7 ultimate 32 bit os. There is AUDIO, RADEON GRAFICS, ETHERNET, and USB CONTROLLER problem. I need support from readers for these. If possible send all readers support the model.

  Hello:

  For graphics, see if my blog article works for you...

  http://h30434.www3.HP.com/T5/notebook-display-and-video/solution-for-getting-HP-notebooks-with-the-R...

  Audio: Accept the agreement, download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  USB:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_135422_1

  Ethernet: Download and install the 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• WRT54G v5.1?

  Dear Support, dear readers,

  I have the aforementioned wireless router, im trying to find the firmware update.

  My version is not in the list, select versions. There is only 1.0, 1.1, 2.0,

  2.2, 3.0, 3.1, 4.0, 5.0, 7.0 and 7.2, but there is no 5.1 on the sticker under

  the device.

  Then

  Use the 5.0 for v5.1 or not?

  If this isn't the case, then where can I find the right method?

  Any help would be much appreciated.

  It is ok.  There is no firmware available for these routers on most levels of version (5.0 and above).

• Windows 64-bit Vista and Western Digital drives

  I have two external drives from WD. One being the WD2500 and the other being the WD2500B007.
  I just bought this new HP with Windows Vista 64-bit machine. Readers will show up, but when they do, they don't show any of the data that I have on them. Everything they say is that they are the two 6 GB. That is the amount of space, they show that I've left on both drives. It's really weird. I perform virus checks, and no viruses are found. Is there a newer driver for these readers? BTW, I have an old WD firewire external drive, and it works fine.
  Please let me know if there's something escapes me! I use two drives for the same backup. I have a portable drive 500 GB that I have with all my data on it, so if I have to reformat the two 250 GB, I. But I didn't reformat the disks if they recognize only 6 GB each.
  Western Digital technical support told me that they won't support the readers for Vista 64-bit.  Can someone enlighten us and help out?

  Thank you!
  Todd.

  You can also try to update your readers to your manufacturers Web site drive controller... but who are internal discs... most of them is provided with the chipset drivers...

  You can try to run the WD on their website... to scan your drive for errors without losing data. also try plugging your drives with USB support. Most Microsoft Valuable Professional

• Drive upgrades

  I have a

  Precision T7500

  Serial number: Service tag removed by privacy policy > | Express service code: abducted by the Express service code privacy policy > which was shipped in December 2009. I have recently upgraded to Windows 10 and has been designed on the installation of a 2.5 inch 500 GB SSD (SATA 3) as a new boot disk and a 3.5-inch 6 drive to for backup use. I'll also have disks 2 to and 1.3 to existing that I intend to continue to use.

  Can you tell me if this machine will work satisfactorily with SSD SATA III and that I will be able to access the space 6 TB?

  Concerning

  You won't see improvement using a SATA 3 disc versus a SATA 2 drive as your comtroller does support SATA 2. But honestly, there are very little practical difference in real-world applications.

  Yes, my comment about the controller refers to training of 6 TB. Newer systems will support the readers from over 2 TB as long as you have the Intel RST up-to-date format using GPT. But 6 to push things. A controller card will make it a breeze.

• Replacement and hard drives in PowerVault 725N

  I have an old PowerVault 725N configured with 80 GB of four disks for a huge 320 of storage.  I would like to replace these readers with something bigger.  Is this possible?

  Is that simply pulling the old records and inserting new ones? Will I need to reload the OS? I have to update the BIOS to support new readers?

  Dell has a 160 GB drive available through spare parts for $65.99 (341-1247)
  Do I need to use Dell discs? If this is not the case, what kind of readers do need me?

  Anyone can offer help or advice would be greatly appreciated. Thank you.

  -C. Thomas