Mini desktop EliteDesk 705 G1: EliteDesk 705 G1 support mini desktop NVMe readers?

Similar Questions

• P6 - 2220t

  Hello

  It's the 3rd HP forum, that I was directed to then I hope it's good.

  I have a HP Pavilion P6 - 2220t under Windows 7 Home Premium. I want to set up a RAID 1 on 2 discs 1 TB I, leaving the operating system on the drive provided factory. Thus, the operating system on a disk existing without modification 2 new 1 TB drives in a RAID 1 configuration: using a SIIG RAID card. I bought a SIIG DP SATA II PCIe RAID card and installed in the PC, but it is not recognized, i.e. it does not appear in Device Manager.  I tried all 3 PCIe slots in the PC with the same result, the RAID card never appears

  I placed the card in a second computer (mini lathe) and it detects and installs the device drivers, but I cannot get the 2 drives in the mini tower.

  Any ideas why the flag can not see the map?

  Thank you

  dt03457

  T 2.0.

  I have advanced and tried to put SATA in IDE mode emulation and Windows wouldn't start.  Once the emulation mode has been set back on AHCI, the PC boots.  So, no harm, no fault.

  BTW, there is no RAID setting in my SATA emulation, I guess that I would have needed a RAID card shipped for this option to display.

  I have a box to open with SIIG so I will go back to work on it to see if they may have or will develop a sort of driver update that may resolve this problem.

  I guess that I'll probably end up moving mothers so I can get the motherboard that recognizes the card in a chassis that will support the number of readers, I need.

  Thanks for your advice, it helped to refine the list of questions and know that I was not far away in the right field.

  Jim

• Replacement of Tecra M9 DVD MultiRecorder Panasonic UJ-852

  Hello

  Unfortunatelly in my Tecra M9 DVD multirecorder is broken.
  It no longer works. System to 'see' it, but no reading CD or DVD, or writing is possible.

  I was looking for the recorder ultraslim PANASONIC UJ-852, but it is very difficult to find.

  So I bought the Panasonic UJ - 832 - almost the same driver (different write speeds).
  But BIOS informed me: ERROR INCORRECT of the BAY and the OS doesn't see at all.

  I also put the LG GSA-U10N multirecorder ultraslim wife U-300 toshiba unit but BIOS again informed me: ERROR INCORRECT of the BAY.

  What it means?
  Are there opportunities that I can replace my DVD broke to the other by myself?
  What I have to buy only UJ-852? Can someone help me?

  Thank you!

  Hello

  Maybe you bought a CD/DVD drive that is not compatible, and BIOS can not recognize this because of bad master/slave/c-salt settings.

  The settings for the desktop PC readers is editable using the jumper.
  The computer s portable slim CD/DVD discs online are controlled by the firmware and you cannot change these settings if you don t have the right firmware.

  So I think that you have to buy another compatible
  I recommend to ask the ASP in your country for a compatible ODD

• Can I move 3.25 floppy drive for HP Pavilion 6730 for HP Pavilion a6157c PC TV?

  6730 a Window 98; 6157 has Vista.  I would like to know the answer before I have start to open office units, I did only to install memory cards.  If the 6157 will accept it physically, I guess I have to download a driver.  Or the 6157 will know where to go and what to do to make it work?

  Here are the specifications of your HP Pavilion a6157c desktop computer and its card mother P5LP-(Leonite2). According to the specification, this model has a connector on the motherboard floppy drive and should support most of the readers of 3.5 "and 5.25" floppy. It seems that there is a space in the CD/DVD drive bays, mount 3.5 "but this space will be"unfinished"once the floppy drive installed. Floppy drivers should be provided automatically by the Windows operating system.

  Please click the White Star of KUDOS to show your appreciation

• Viewing PDFs in Windows 8

  How do you view the PDF files on the desktop in windows 8.  I have several open a PDF file that I must return between.  It seems that it takes me to the home screen to display and I can see only one at a time.  Help!

  How do you view the PDF files on the desktop in windows 8.  I have several open a PDF file that I must return between.  It seems that it takes me to the home screen to display and I can see only one at a time.  Help!

  Hello

  Windows 8 still support to almost all readers of free PDF for the office that were used in previous versions of Windows. Most of these products you will be asked if you want to make this PDF reader by default when they are installed.

  PDF reader, PDF Viewer | Adobe Reader XI:
  http://www.Adobe.com/products/reader.html

  Free PDF Reader and creator | Nitro PDF Reader:
  http://www.nitroreader.com/

  Foxit Reader - Reader download and Add - ons - Foxit Software:
  http://www.foxitsoftware.com/Secure_PDF_Reader/addons.php

  Concerning

• HP EliteDesk 705 G2 MT: windows 10 tries to install windows 10

  I bought a new HP EliteDesk 705 G2 MT Desktop, with 10 Windows installed and every day after that I turn it on, it did a restart planned to install "Upgrade to Windows Home version 1511 10, 10586". I can't stop this restart, and it does not level to something new?

  How can I stop this?

  quark_uk

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the problem of repeated upgrade Win10 and wanted to help.

  If you bought this PC last fall, it sounds like he's trying to make the November update - again and again.

  This update changed the OS release Win10 10240 to 10586.

  To see what version you have, open a command window and enter "winver" (without the quotes).

  "If who says NOT version 1511 release 10586.nnn, then it is the update of November" probem "- and you can work around this by forcing your PC in the new release to make something known as a repair installation. It is less destructive of all functions of Windows recovery and rewrites the files from Windows system, including drivers, leaving your apps, settings and data intact.
  
  To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT.  If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Once you have that media, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.html
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HP Elitedesk 705 LTS G1: pcie intel 6205

  After installing an Intel 6205 802.11 PCIe Wireless card in an HP Elitedesk 705 G1 SFF PC, the pc does not start upward.   It gets to the Windows startup screen and restart again.    This will be repeated this constantly until the power is off.   The pc works fine when the card is removed.   I tried several maps and several computers of the same model, and it does the same thing.   We just started to use the 705 Elitedesk.   6205 wireless cards worked well in other models of PC.   Anyone had similar problems?

  Hello

  You cannot use the card that is not in the list:

  http://h20195.www2.HP.com/v2/GetPDF.aspx/c04330394.PDF

  Integrated Broadcom NetXtreme GbE; Intel I210 - T1 PCIe GbE (optional); Intel Wireless - N PCIe 7260 802.11a/b/g/n (optionally); HP (2 x 2) 802.11a/b/g/n wireless dual band Mini card with Bluetooth® (optional)

  Kind regards.

• 800 Mini G2 EliteDesk: Dual 4K displays with EliteDesk 800 Mini G2?

  I have an EliteDesk 800 Mini G2 with the i5 - 6500T CPU and integrated graphics card Intel 530. There are also two DisplayPort connectors. As the title says, I tried to find out if the device supports two monitors 4K 3840 x 2160 @ 60 MHz. The specs seem to suggest that it would work. I'm confirming without having 2 K 4 monitors on site. Anyone know or have experience with a configuration like that?

  The i5 - 6500t supports up to 3 screens to 4096 x 2304 @60 Hz

  http://Ark.Intel.com/products/88183/Intel-Core-i5-6500T-processor-6M-cache-up-to-3_10-GHz

  Implementation of multiple 4K displays with your EliteDesk 800 Mini G2 will work. Your EliteDesk Mini supports up to three displays to the right of the box. I suggest using the displayport output ports.

  http://www.Intel.com/content/www/us/en/support/graphics-drivers/000005580.html

• Upgrade memory for desktop Aspire TC 705

  Hello, I would like to upgrade my TC Aspire 705 4 GB to 8 GB... whose memory is compatible and which is best?

  It has two slots a blue and a green, blue is occupied by the Bank of memory that came with the pc and is a SK 4 GB PCL3 1Rx8 hynix low voltage - 12800U - 11-13-A1 I said, I tried a similar Bank, but he did not not recognized by pc (?) no beeps or the other (?) I tried the solo Bank upgrade, then I got beeps (?) someone advice pls?

  TIA

  Rudy

  The problem with the purchase of Hynix is that it is too expensive.  Almost double or triple the price because they have really not the retail arm for their "regular memory.  They started a retail arm for their passionate high range for boards thing this year... which does not help.

  All you really need is this module of Kingston.  It works perfectly with your memory of BIOS and Hynix Board, CPU, Intel/Acer H81... and should run two channels with existing memory... no problem.

  http://www.Newegg.com/product/product.aspx?item=9SIA4M53GY8162&cm_re=KAC-VR316S%2f4G-_-20-239-298-_-...

  Edit: If you can find the part of Hynix on Ebay at reasonable prices, then go ahead.  I have the above kingston module and it works perfectly (dual channel) with Hynix in tc - 605 (which has the same advice that tc-705).

  Edit2: Memory voltage (DDR3L) will work to 1.35 or 1.5V.  Your existing Hynix DDR3L will work perfectly @ 1.5V as this is a standard JEDEC for your motherboard.

  http://www.Kingston.com/us/memory/search/?partid=KAC-vr316s/4G

• EliteDesk 800 G2 Mini 35W: EliteDesk 800 G2 Mini 35W - Bluetooth problems

  I'm trying to get this camera photographed with our base image 64-bit Windows 7 Enterprise. I get the following errors:

  • In Device Manager, the Generic Bluetooth adapter is to throw the error "Windows has stopped this device because it has reported problems (Code 43)"
  • In case the Viewer, in Windows logs - system, I see the following pop up every 20 seconds or so: "the local Bluetooth adapter ran out of undetermined manner and will not be used. The driver has been unloaded. "EventID is 17 and the Source is BTHUSB.

  I tried several different drivers, both HP and Intel and applied two patches (KB982046 and KB980396), from various other recommendations of Web sites. I tried the recommendations repeatedly repeated re-disabling/enabling; Uninstall/scan for hardware changes & pilots applying; closing (unplug) for several minutes and restart System. Currently, I'm doing a request only the USB and NETWORK card drivers and am still seeing this problem, but I also applied all the drivers with no difference.

  A few questions:

  • Has anyone else seen elsewhere and fixed it?
  • USB drivers would be the issue? I use USB drivers otherwise, I can't use my keyboard and mouse.
  • Any other suggestions?

  Hello:

  Try the W7 x 64 driver directly from Intel.  2nd pilot down on the left side of the page for 64-bit.

  https://Downloadcenter.Intel.com/download/25838/Intel-PROSet-Wireless-software-for-Bluetooth-technology-for-Windows-7-?product=86068

• My desktop sucks TC-705 computer freezes in World of Warcraft, after a few minutes of play.

  Had the game been gel after anywhere between 5 to 10 minutes of play.

  WoW help suggested to disable all background processes much (67) and re-definition of management power to the 'high performance '.  After doing this, I still had 29, including 3 by McAffee background processes which I don't really ever.  He then works the freedom to play the version of WoW for 24 minutes before it froze.  The only way out of the gel is to re - start the computer.

  I still get pop-ups for office, 'start' (' Start to the experience of the Acer BYOC applications & services ")

  WoW help think it's many pop ups that freeze the game.

  1. do you agree?

  2. How can I get rid of them?

  3. What can I do else?

  I guess he's adjusting the game settings.  Give it a shot.

  https://gameplay.Intel.com/

• HP Elitedesk 800 G2 SFF: external hard drive not detected in the BIOS. Only USB Flash drives are detected.

  Hi all

  I received recently 2 new HP desktop computers.

  HP Elitedesk 800 G2 SFF

  HP Elitedesk 800 G2 TWR

  The goal is to test our real W7 x 64 image on these machines and to inject the missing drivers in the image.

  MDT 2010 to create a deployment on a USB hard disk drive.

  This disc of deployment is already used on 16 different models of HP in the company (Elitebook, zBook, EliteDesk) to install our image so I know it works.

  Unfortunately, the two HP Elitedesk 800 G2, I can't start the boot disk but I cannot to USB for a USB key.

  The USB drive is not detected and not proposed in the BIOS Menu of STARTUP.

  Only the internal HD, external USB Flash Disk, DVD and network devices are detected.

  Here's what I already checked or tried:

  • Latest Version of the BIOS installed (2.05)
  • UEFI Boot has been disabled. (not supported by our record of deployment)
  • USB ports are enabled (front and rear).
  • All types of USB devices are allowed in the BIOS
  • The start command has been changed to start with USB devices.
  • Legacy support is active and Secure Boot disabled
  • Delete the keys to secure boot
  • Reset secure by default startup keys
  • This morning, I created a new disk deployment on a USB Flash drive and it works!

  So, it seems that only Flash USB drives are detected.

  I know it is possible to return the flag removalble on a USB device to cheat the system and make it appear as a disk fixed, but I want a simple solution.

  Does anyone know a fix or a workaround for this problem?

  Thanks in advance!

  For those interested in the answer, here's the final results.

  It turns out that the hard 500 GB external drive can be detected if it is fomatted in FAT32.

  It's strange because my 16 GB USB Flash drive formatted in NTFS works very well.

  In any case, I'll create a FAT32 Partition to the Boot MDT files and put my picture (because the file is too big for FAT32 partition) on the secondary partition (formatted as NTFS).

  Thanks to the technical pre-sales team of HP who helped me with this!

• HP EliteDesk 800 G2: HP EliteDesk 800 G2 2.5 inch screw drive

  Where can I get screws drive 2.5 inches.  They are distinguished by the 3.5 inch mounting screws.  These should be shock resistant mounting screws.

  I can't believe that it was so difficult for an answer.  I found that they use the isolation to drive screws 2.5 "on the recent series of mini EliteDesk.

  The correct answer is:

  HP part # 594220-001 - past - son of insulation of hard drive (blue color)

  They are difficult to find than the 3.5 "drive of isolation living in the after-market.

  Have a great day everyone.

• How to enable virtualization on hp elitedesk 800 g1?

  My desktop hp elitedesk 800 G1 and installed with 64-bit Windows 7. When run the virtual machine or vmware it inform me to enable virtualization in BIOS, but I counldn can't find where to enable virtualization in the BIOS setting (entry in the decoration by press F10 during restart). Any suggestions will be appreciated!

  Hello:

  I don't have your model, but nowadays, to access the BIOS on most of these new PC you must type the ESC at the beginning of the HP welcome screen button to display a menu of options.

  Then, you select the F10 Setup option and enter the BIOS.

  Normally activate VT definition is in the Security menu.

• Failure rate of hard disk EliteDesk 800 G1

  Has anyone else had rained failure rate of 5% on hard drives EliteDesk 800 G1?  We have a fairly LARGE amount of disk on these devices failures.  We cannot be the only ones... we have more than 900 of them, and they have failed across the country...

  Hello grimmda,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are looking for some statistics on rates of failure on the HP EliteDesk 800 G1 Series Business Desktop. I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do to the company - Compaq, Elite, Pro PC.

  I hope this helps. Thanks for posting on the HP Forums. Have a great day!