Guide to Installation of the MEV

Similar Questions

• New drive p P: 6930, 6930 - Installation of the OS

  Hello

  I bought an old HP 6930p laptop which worked very well.

  The hard drive has begun to break up and I just bought a new hard drive for it.

  At the time of the Installation of the OS it keeps giving me a blue screen of death.

  Unfortunately, I don't have a HP OS drive and I'm trying to load from a Dell XP disc that came with my Dell laptop.

  Is it possible to load the top OS?

  I tried to run diagnostics on the hard drive and it shows me that the hard drive has all the problems.

  Thank you.

  Loki.

  Hello:

  You must install the AHCI sata drivers either "slipstreaming" them or by using a USB floppy drive to install the specific sata ACHI driver you need for the 6930p.

  Please read this guide on how to integrate the drivers.  Read the Intel section and then read the downloadable document on how to integrate all drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  I compressed upwards and tied the drivers that you need wake below.

  If you prefer to install the driver at the F6 prompt that you get at the beginning of the install XP via a USB FDD script, then you must use the up/down arrow keys to scroll and select the Intel(r) ICH9M-E/M SATA AHCI Controller in the list.

  If you live in the USA/Canada, you can call this number to order a recovery disc for the PC license originally supplied with (the COA sticker is on the bottom of the laptop under the card holder clear plastic).

  1-800-334-5144

  Have the serial number of the laptop handy to give to the customer service rep.

• Cursor not moving/working after the installation of the new keyboard

  I just finished replacing the keyboard on my HP G72 due to spill water on the keyboard a few days ago & some keys no longer work after laptop parched. However, I find that things are not as they should because I can't get the cursor to move. I do not use a mouse & rely on the touchpad. I tried to remove the keyboard & reinstall several times but all about no. avail & wonder if anyone can give me some advice, even if it is the keyboard itself may be defective & I need to buy a new one. I don't want to just assume there is a problem with this new keyboard only to discover that the problem is somewhere else & that there is other things I should be doing or trying.

  I had to install a new keyboard on this computer laptop sometimes last year afer having a similar accident with the flow of the water, but the installation of the new time was pretty much a piece of cake, I followed the guides on the screen, I have been looking & everything was perfect, once I had installed the new keyboard.

  Thank you if you can advise.

  Hello

  If possible, try a USB mouse for awhile. This way if the slider works, you can try reinstalling the drivers for the touchpad that could solve the problem. If the cursor does not work with an external mouse also then the problem could be hardware related.

  Sometimes to repeat the installation process of the keyboard all over again also helps.

• Best practices for installation of the equipment of the unit

  Is it possible to use the CD of hardware for installation with the unit while I'm using the correct equipment. Or is it recommended to install from scratch and apply the updates of security on the Unity software page.

  Thank you

  Tim

  I think that you are writing about Hardware configuration CD of the CallManager. If you are, then this is a NO-NO.

  You need the disks of the Platform Configuration that is provided with the server if you have purchased the license for the windows 2000 Server.

  So, if you don't have the disks in the Configuration of the platform, you can download the driver from HP hard drive controller and install Windows manually. Install SP4, IE6 Sp1 and you can use automatic Windows Update If you follow this guide:

  Support policy for the automatic update of Windows

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/prod_pre_installation_guide09186a008020a63e.html#wp64185

• Installation of the R 11.2 grid Infrastructure and RAC on AIX 7.1

  By referring to:

  Manual 'Oracle Grid Infrastructure -
  "Installation Guide 11 g Release 2 (11.2) for AIX on POWER Systems (64-Bit).
  E48294- 01

  Chapter 2.7, "id Software".
  requirements '.

  Q: as prerequisites to IM and
  Installation of RAC, we ABSOLUTELY NEED to have installed

  -ADA (OC PowerAda 5.5 systems),

  -Pro * Fortran (IBM XL Fortran v. 11.1 April)
  2008 MFPS for AIX)
  
  -Pro * COBOL and

  -Oracle Messaging Gateway (IBM WebSphere MQ
  V6.0.2.0)?

  We wish to avoid
  unnecessary scopes during this installation.

  The overview of the project:

  We run Oracle EBS R 12.1.3 on RDBMS
  11.2.0.3 on AIX 6.1, simple installation of the enclosure.

  Plan is a proof of concept and
  migration/switch to: two new boxes AIX 7.1, install GI 11g R2, RAC and set up
  OEBS to run in clustered environment. RDBMS and EBS will be cloned to

  existing environment.

  Thx a lot!

• Installation of the RCMP to ebiz R12.1.3 32 bit

  Hello
  
  I am new to the RCMP.
  I need to install the RCMP in oracle ebiz R12.1.3.
  operating system is 32-bit linux.
  
  in delivery, for 64-bit available only software?
  For the installation of the RCMP, I need any server applications like WLS, SOA?
  document available to any step by step?
  What is the use of the RCMP?
  
  
  Please suggest me.

  Thanks for all replies.

  I've successfully implemented the preventive governance R12.1.3 Vision pending e-Business suite.

  Document that I followed to install,
  Oracle® controls preventive Governor
  Installation Guide
  Version 7.3.2
  E25385-01.

  In this, validate the procedure also available.

  Thank you & best regards
  Kumar

• Problem with the Installation of the AIA.

  Hi '.
  
  I try to install Oracle AIA on my local machine, however on step 4 of 12 error is coming
  Node Manager unreachable for machine 'Local computer', please make sure that the node Manager service is running and port 5556
  
  I have Oracle SOA 11.1.1.5.0 installed as a prerequisite.
  
  I'm following Oracle® Fusion Middleware
  Installation Guide and upgrade for the integration of Oracle applications
  Architecture Foundation Pack
  11g Release 1 (11.1.1.4.0)
  
  This doc on page 2.2.1 ensuring the correct settings for starting Node Manager... 2-8
  that we should have a node Manager, race, now when I go into the SOA Suite installation folder, some of my files are missing
  
  C:\Oracle\MiddlewarePS4\wlserver_10.3\common\bin---startNodeManager.bat (MISSING)
  C:\Oracle\MiddlewarePS4\wlserver_10.3\common\nodemanager---nodemanager. (MISSING) properties
  
  
  I don't know why it is missing,
  
  If someone has done the installation, please help me.
  
  Thank you
  Yatan

  Hello Yatan,

  To start the nodemanager, you need to browse to C:\Oracle\MiddlewarePS4\wlserver_10.3\server\bin and run "startNodeManager.cmd" (there is no file as startNodeManager.bat).

  "nodemanager.properties" will be created under '"C:\Oracle\MiddlewarePS4\wlserver_10.3\common\nodemanager\" once you start the nodemanager.

  You can also check the status of console weblogic nodemanager.

  (a) connect to the weblogic console.
  (b) access the Middle-> Machines in the Structure of the field (on the left side) Panel
  (c) click on "LocalMachine".
  (c) click on the 'Analysis' tab for the status of nodemanager.

  Thank you
  -Pavan

• Installation of the Sierra

  It is essential to backup prior to installation of the operating system Sierra?

  Yes. It is always essential to backup before starting any kind of a major project as an upgrade of the operating system.

  Old saying IT: it is always best to have a backup, no need then to need a backup and not have it.

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• After installation of the latest version of firefox on the homepage still says that I don't have the latest version

  After installation of the latest version of firefox and I use the new icon on my desktop, it always says that I don't have the latest version. Installation will correctly

  It - http://www.google.com/firefox - is the old Page to start Firefox used by the Firefox 3.6 and earlier versions of Firefox, I do not think that it is maintained by Google.

  From version Firefox 4, Firefox uses a 'local' with the address Start Page of Subject: House. It looks like the old start Page, but this isn't exactly the same thing.

• Portege 2000 - new installation using the PCMCIA CD-ROM XP

  I try to install XP on Portege 2000 using the official PCMCIA Toshiba CD-ROM drive.

  Install the XP disk boots fine, but after that Setup copied the files it blue screen (BSOD blue). I'm not very tech savvy, but I think it means that the BIOS can 'see' the PCMCIA CD-ROM, but that the real image of XP loaded by the installation program cannot, probably due to missing drivers for the PCMCIA CD-ROM?

  Then, I thought that maybe I could use F6 to load additional drivers during the initial installation, but it is beyond me to create the right set of files required. I know that you can download the Freecom drivers, but I don't know what are the driver files from CD to use and how to create from scratch the txtsetup.oem file right.

  Does anyone know how to properly use F6 and load the drivers for it?

  I found a lot of messages suggesting I copy the installer to the HARD disk and launch the installation from there. My problem is that the XP installation is an upgrade CD, so I will ask you at a certain time to insert a previous Windows CD and if at that time there I don't have a working CD-ROM drive...

  First post on this forum so be nice - I did a search but not find a thread with a real solution, but of course if I miss a please report!

  Edited by topic: beneix_1

  Hello

  I managed to install Windows XP Home the Portege 2000 using the PCMCIA reader but I ve used recovery disks original Toshiba which includes the correct driver for external optical drive.

  So far I tried not to install Windows XP Home edition, using the Microsoft installation disc.

  Maybe you should get the disks of facilities and not use this upgrade disk. I think that on this path, you will be able to install WXP as suggested when you copy data from facilities at the disk directly.
  Have you tried to get the original recovery disc Toshiba WXP?

• OfficeJet Pro 8000: installation of the driver wireless Officejet 8000 Pro says default gateway is 0.0.0.0

  I'm chasing a well-documented problem of my printer lost network connection after a variable period of printing to do not. The only way to connect is to change the power supply, but the printer may take 5 minutes to blow and grunts until it settles and prints...

  I put a static IP address on the printer (10.0.0.250) as well as an empty default gateway successfully, and the documents are printed after 5mins of blowing and grunting (save the regular lost connection which I'm hunting...).

  I put what I thought has a static IP address on the router to match (see image below), but now I don't know if it was necessary, and if the 'hosting of the fixed DHCP server' is correct. It might be useless and missleading...

  Using the configuration of the printer to 10.0.0.250 interface, it seems to accept the installation of the network when the default gateway is blank. With the help of 10.0.0.2 caused the 'page not found' error in my browser (Chrome).

  However, when you try to reinstall the drivers, the installer has grumbled to the default gateway is set to 0.0.0.0, which currently is the only way it will work...

  The Win7 PC is plugged into the router.
  The printer wireless to the router.

  ipconfig on the pc gives Ethernet card details below.

  So basically I have no idea what I'm doing...!

  ==============

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::c8e1:63ef:85e0:7 24% 13 c.
  IPv4 address...: 10.0.0.249
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 10.0.0.2.

  Router config.

  

  Thank you for your comments. It seems that I solved the problem of the default gateway. Time will tell if the remains of the printer connected through long periods of no use (see update below).

  It seems that the configuration of the router of the "DHCP fixed existing host" has nothing to do with the device assigned a static IP address. In fact, it seems that this setting prevents the printer through a default gateway of the router address.

  I noticed that when you give the PC a fixed IP, it connected through the router without any other configuration of router. If I reasoned that it may be applied to the printer also, so I moved the printer 10.0.0.251 and Bingo! the default gateway can be set to the IP address of the route.

  Since then I downloaded to other updates, which is supposed to correct the common problem of wireless printers, loss of the connection.

  I'll try to report in the next few weeks an update about the stability of connection network printers.

  UPDATED: May 23, 2016

  And more of the foregoing, my router support suggested I increase a parameter "timeout" from 24 hours to 10 days. I did it more than a week. Today, the printer worked after the impression of not for about 5 days

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• Question about the installation of the OS

  I have some problems with the shortcut keys and I want to reformat my system.
  Problem is that I have not created recovery cd before, is this going to work if I do it now.

  Thank you

  Hello

  Please don t worry about the recovery procedure. It's very simple to do. Put the recovery CD in the CD/DVD drive, start Notepad and press C button and hold it for a few seconds. This will force your unit to boot from the CD/DVD drive.

  Follow the instructions on the screen. Standard mode will erase the whole HARD drive and create a partition. If you have only one partition I recommend to set up two of them. One will be used for the OS and application installations. The other can be used for the backup of data.

  If you need more instructions, please write again.

• Re: Where to find the installation of the driver so that the Satellite A500 - 14q?

  Hello...

  I use Toshiba numere for awhile now and I never really paid attention to the order of installation the installation of the drivers.
  Now, I'm doing some research around this forum and discovered order 'is' somewhat important. or not?

  I just usually begin as desktop:
  Chipset, graphic, audio, and then all the rest. OK, toshiba must also have this addon of value, but I never installed in a specific order.

  So, the question is - where to find that my current machine (a500 - 14q) and my future one (p775.10j)?

  Thank you very much...

  Hello

  The order of installation is important if you are installing the tools of Toshiba.
  Some tools require installation of other tools.

  I looked into some of this forum for similar topics and found some details:
  Order of installation of Win 7:
  1 Windows 7 64 bit
  2 Intel Chipset SW Installation Utility 9.1.1.1019
  3 Intel Matrix Storage Manager 8.9.0.1023
  4 AMD driver 8.634.1 - 090729 a-086065C-Toshiba to display
  5 NVIDIA HD Audio Driver, 1.0.0.55
  TOSHIBA 6 utility 1.63.0.7C supervisor password
  7 TOSHIBA HW Setup Utility 1.63.0.11C
  Utility support 1.63.0.4C 8 TOSHIBA Flash Cards
  9 Realtek Audio Driver 6.0.1.5904
  10 Intel Wireless LAN Driver 12.4.1.11.0.s64_wCAT
  11 Synaptics Touch Pad Driver 14.0.1.1
  TOSHIBA Software Modem 2.2.97 12 (SM2297ALS03)
  13 Toshiba HDD Protection 2.2.0.2
  14 Bluetooth Stack for Windows by Toshiba v7.00.08 (T)
  15 Realtek LAN Driver 700.305.222.009
  16 Jmicron 1.00.32.01 card reader
  17 Sleep USB TOSHIBA and 1.2.3.0 service fees
  Facial recognition TOSHIBA 18 V3.1.1
  19 TOSHIBA eco Utility V1.1.11.64
  20 Sun Java2 Runtime Environment 1.6.0_14
  21 TOSHIBA HDD/SSD Alert 3.1.64.0
  22 TOSHIBA Service Station V2.1.33
  Control HDMI 23 2.0.0.1.64 Manager
  Manager remote control TOSHIBA 24 3.0.0.0
  25 TOSHIBA SD utility 1.9.1.12
  26 TOSHIBA PC Health Monitor 1.4.1.64
  27 TOSHIBA Fingerprint Utility 1.0.2.9
  ConfigFree 28 8.0.23
  29 TOSHIBA Web Camera Application, V1.1.1.4
  30 TOSHIBA Software Modem region Select utility 2.3.0.13
  31 TOSHIBA Network Device ID registry tool 3.0.32.4
  32 TOSHIBA Bulletin Board 1.0.04.0
  TOSHIBA ReelTime 1.0.04.0 33
  Memory SD 34 V1.9.1.12 utilities
  35 value package V1.2.26_64