Guide to the flow of WORK in APPROVAL.

Similar Questions

• How far is the flow of work & GUI in 10 pre pre 8?

  In fact, I'm not sure that I ask in the right place - is equivalent to "Discussion" "Forum"? It's been a while since I've posted in the forum and things have changed a lot. I seem to be going round in circles. (You know you're in trouble when you know not even how to use the help forum :).

  My one question became two when I tried to use this forum.

  (1) how close is the flow of work & GUI in 10 pre pre 8? A PrE8 manual would be very helpful for PrE10? (Note: the latest version, I have worked with is pre 2 so I should know the basics.) I'm just learning where everything is now).

  (2) I would like to read all of the questions in the forum, but all I can see are securities under "a trend of issues." Is it the way it is now? I would like to extend the question list so I can read the first few sentences - is there a way to do? I used to learn a lot by reading the forums, but only titles are not very useful.

  First of all, you're in the right place - Discussions are the Forum. Now, if you do not see the wires themselves, you're probably in the preview mode. Just click on one of those and if playback, search the debates of the elements of the first and click on this hyperlink. You should then see all the threads of Discussion.

  Regarding countries 8 vs pre 10, they'll be close enough. Although there are a few changes with pre 10 (for most things like more project Presets, etc), the general course will be almost identical. Some operations may take their "button" in a slightly different place and with a little, the syntax might have changed. In general, things pretty much always works the same way. All the main concepts NLE (of Non-linear editing) will always be applied.

  Today, Steve Grisetti, our tireless MOD here, has a book of pre 10 updated through Muvipix.com, and it has been updated for the new program, pre 10, so what it will cover what changes little there.

  Good luck

  Hunt

• Duplication of the Guides at the duplication of work plans

  How do you duplicate the guides on a work plan during the duplication of the artboard? I tried to unlock the guides beforehand and sometimes some of the guides are duplicated, but not all.

  I noticed that the vertical rails that appear beyond the borders of the artboard tend to be more likely to reproduce, but as I say, sometimes some of them don't.

  Which also leads me to ask, why do guides go beyond the artboard and others not?

  I use CS5 on Mac.

  Thank you

  Dave

  Dave,

  Create a new document, download the tool of work plan and place your guides to ensure that they are not locked. When finished, press the ESC key. Now duplicate your work plans.

• What is the flow of work to prepare and sign a document with Acrobat DC when you're a signatory?

  I think it would be:

  1 convert the document to PDF

  2 Add fields of signature with "prepare the form."

  3. the signal under "Fill & Sign".

  4. send to others

  However this breaks down proceeds to step 2 or 3. After adding the signature fields and go to fill & sign, you don't get any options to sign. On the right, he said only: "you opened a PDF form. This form won't let you drag-and - d├⌐poser saves information. "There are two buttons for"Send & Track"and"To get others in the sign", but not a 'Sign This Myself" or similar.

  Yes, it works with Acrobat XI. It is not compatible with the latest version of Acrobat DC.

• The flow of work, Servlet, popup and a managed Bean validation

  Hello
  
  We try to display a PDF file in a pop-up window by calling a Servlet in a JSF page using a workflow in JDeveloper 11 g R2.
  
  The relevant part of JSF:
  

  <af:inlineFrame id="if1" shortDesc="Report" source="/pdfservlet" styleClass="AFStretchWidth"></af:inlineFrame>

  The /pdfservlet points to a Servlet with a method doGet as follows:
  

  protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
    response.reset();
    
    OutputStream out = response.getOutputStream();
  
    FacesContext context = this.getFacesContext(request, response);
    OracleReportBean bean =
      context.getApplication().evaluateExpressionGet(context, "#{reportBean}", OracleReportBean.class);
  
    bean.run(context, out);
    removeFacesContext();
  
    out.close();
  }

  The Servlet is trying to get the FacesContext, but we met with the following exception:
  

  Caused By: javax.faces.FacesException: Cant instantiate class: oracle.adfinternal.view.faces.component.AdfViewRoot.

  We have removed the following lines to the getFacesContext() method:
  

  UIViewRoot view = facesContext.getApplication().getViewHandler().createView(facesContext, "");
  facesContext.setViewRoot(view);

  This avoids the exception above, however... We try to get the settings of the form that was submitted. Here is an example of the form element:
  

  <h:inputHidden value="MyMedicationList_Report" id="system_REPORT_RESOURCE"/>

  When the Servlet calls the Bean managed to retrieve the value, it uses:
  

  Map<String, String[]> requestParameters = getRequestParameters();
  Parameters p = getParameters();
  
  for( String key : requestParameters.keySet() ) {
    for( String value : requestParameters.get( key ) ) {
      int i = key.indexOf( ':' );
  
      if( i >= 0 ) {
        key = key.substring( i + 1 );
      }
  
      p.put( key, value );
    }
  }

  Where getRequestParameters() tries to get the external context to retrieve the map of query parameter values:
  

  return getExternalContext().getRequestParameterValuesMap();

  The card is empty.
  
  I tried after http://www.oracle.com/technetwork/developer-tools/adf/learnmore/oct2010-otn-harvest-183714.pdf by assigning the web.xml file:
  

    <!-- JspFilter must be configured before adfBindings. -->
    <filter-mapping>
      <filter-name>JpsFilter</filter-name>
      <servlet-name>PDFServlet</servlet-name>
      <dispatcher>FORWARD</dispatcher>
      <dispatcher>INCLUDE</dispatcher>
      <dispatcher>REQUEST</dispatcher>
    </filter-mapping>
    <filter-mapping>
      <filter-name>adfBindings</filter-name>
      <servlet-name>PDFServlet</servlet-name>
      <dispatcher>FORWARD</dispatcher>
      <dispatcher>REQUEST</dispatcher>
    </filter-mapping>

  And set the data bindings on:
  

    <pageMap>
      <page path="/pdfservlet" usageId="ca_bcpra_promis_reporting_view_PDFServletPageDef"/>
    </pageMap>
    <pageDefinitionUsages>
      <page id="ca_bcpra_promis_reporting_view_PDFServletPageDef" path="ca.bcpra.promis.reporting.view.PDFServletPageDef"/>
    </pageDefinitionUsages>

  The Servlet is running, called the managed bean instantiated, but cannot read the query parameters.
  
  Is the button used to start the workflow in a dialog box:
  

  <af:commandButton text="Run Report" id="submitReport" useWindow="true"
                    windowEmbedStyle="inlineDocument" windowModalityType="applicationModal" windowHeight="500"
                    windowWidth="700" action="runReport"/>

  By using a workflow, the user input are validated before the opening of the pop-up window. We want to keep this behavior. The PDF file opens and then returned with a NullPointerException:
  
  http://pastebin.com/raw.php?i=PaM64jL4
  
  The Servlet, through the managed bean, made a request to the report server to pass parameters and generate a PDF file. The PDF is sent to the browser via the Servlet.
  
  What other steps can we take to:
  
  1. send user and system parameters.
  2. generate a PDF file on a remote server.
  3 distribute the PDF file to the user in a pop-up window.
  
  Thank you.

  Here you go
  https://www.EverNote.com/shard/S48//sh/ae8f58be-c4d3-4AB9-8F94-3e01d0e967d0/923ab115aca22fd1e2fccbf6321cbf09

  Timo

• automatic control in the flow of work flow

  Hello
  
  I use jdev 11.1.2.2.0
  
  I have a workflow with 3 pages (p1, p2, p3). each page wil have an output text.
  
  My requirement is with out having more buttons command or something... Firstly it must view page1, then after 10 seconds it should go to page 2 automatically
  then, after 10 sec, he should go to page 3
  
  Thanks in advance
  RAK-

  You can put an af:poll to page 1 and page 2 component that you initialize with the amount of time you want to wait (10 sec). After 10 seconds, the pollListener is called. This listener is implemented in a bean that queue of an event on a hidden button (or navigation directly). The button is hidden on the page but it goes to the second page. Here, do you the same thing.

  Timo

• Problems with the flow of the bank account

  Hello

  I subscriped CC 6 months ago. The flow of work of until last month. I received an email, that he had problems and I have to check my bank account of data.

  I do not understand what had happened, because nothing had changed since the last valid flow. The balance of my bank account was more than 'ok '.

  So what has past?

  Concerning

  Stefan

  Info support (via chat): there was a server problem to the cc-product flow assing in on behalf of adobe. Will be fixed soon.

• Will there be a new commissioning Guide in the works?

  Hi, I'm looking for a commissioning guide that is updated.  The new Jabber Cisco telepresence admin guide asks the reader to find in my version of TMS Provisioning Deployment Guide.  Now that I've installed Extensions commissioning, I can't find a guide that works.  Maybe I missed it.

  Darren

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/tmspe/Install_Guide/Cisco_TMSPE_Deployment_Guide_1-0.PDF

• Flow of work presentation action causes the "presentation presentation processing, please wait."

  I have a workflow with a string field I want to offer as a dropdown of the results of a SQL database. I created an action to query data that is passed to a value of SQL: Database. The action script is below to:

  Queries on MGMTDB

  var results = new Array();

  var SingleResult;

  var query = 'SELECT TemplateOS, TemplateVersion FROM TableName';

  var QueryResults = MGMTDB.readCustomQuery (query);

  for each (QueryResults SingleResult)

  {

  model var = SingleResult.getProperty ("TemplateOS") + "" + SingleResult.getProperty ("TemplateVersion");

  System.Debug ("getTemplateNames:" + model);

  Results.push (template);

  }

  return results;

  However, as soon as I add the action to a property of presentation, the work flow forever "presentation of treatment." The action itself works fairly quickly. I've added it to a workflow of test as part of his scheme, and I retrieve the table desired channels instantly. It is only when it is used for the presentation he gives me a problem.

  Anyone has any ideas, what happens?

  This field is then used to calculate other areas? The issue may be that when first load your presentation can try to calculate the fields using entries zero. One way to avoid mistakes is to test the input null in every action parameters and returns the null value.

• Understand the flow of appeal through VCS c/e

  Hey Geeks,

  I write this to understand "how to work things. Here's the design.

  I have a VCSC configured with the name of the domain example.com SIP (we have internal DNS server to resolve)

  I have a VCSe configured with the name of the cisco.com SIP domain (we have external DNS server to make globally routable)

  I create a link bw VCSC and VCSe course.

  How the call will flow between the Ep A and B Ep

  Scenario a.

  My Ep A is [email protected] / * / dials Ep B Jabber client (user) recorded on VCSe [email protected] / * /

  How call flows; I understand that the flow of the beginning IE Ex 90 will send a register message to VCSC etc etc.

  Scenario B:

  If Ep A [email protected] / * / call a 3rd party (distinct) = (inter appeal cases) End point ie [email protected] / * /

  How runs the call.

  Please excuse me for asking layman explanation:

  Thanks in advance

  Vikram

  Hi Vikram,

  First thing to note is in most of the customer scenario prefer same sip domain on highways and control so that they can avoid transform and simplify the numbering plan.

  Happens to your scenario.

  Scenario a.

  EP A VCS-contrl<--traversal-->VCS - Ex <--SIP--><--sip-->Ep B (points of termination assumptions made using the SIP protocol)

  EP began with the sending of a guest for VCS-cntrol SIP message, which gets transmitted to VCS - by VCS-cntrl exp, hope you're installation rules research properly on vcs control.

  VCS - exp send this appeal to Ep B and call connect. You can google for SIP call flow, so nothing different happens in this case.

  Scenario B

  EP A VCS-cntrl<--traversal-->VCS - Exp<-->public cloud<--SIP--><-->Ep B (dell.com)

  A DNS zone, which uses the dns configured on exp do query srv records to the external field like "dell.com" is now required to apply for external part VCS - exp

  in this scenario again Ep began with the sending of a message to the VCS-cntrl invitation gets sent to the SCV - exp rules-based research. VCS - exp begins looking for new address based on the rule of the research and since it does not find the URI ending with exp and "dell.com" starts to send query record srv for the domain "dell.com". DNS configured on exp in the SRV company A sends question and get an answer for this domain with the company B VCS - exp - ip address, and then vcs - exp in company A starting configuration of the call to the remote ip address.

  now in the present, you can have several scenarios and I recommend you consult the guide deployment for VCS-control and traversal solution VCS - exp.

  Rgds,

  Alok

• Understanding of the flow and steams AQ and AQ

  I use 11g.
  
  Can you explain the differences between currents / vapours QA / QA / standard queued?
  
  
  
  Thank you

  AQ (Advanced Queuing) is an enabling technology that flow is based on top of. You can write applications that use AQ without using water. You cannot use streams without the use of QA.

  Originally, streams and AQ were distinct projects. Recently (I mean in the span of 11g, but I don't guarantee that), the designation of the two products have been grouped. I guess it's because that water is the main way that QA is used so it was logical to combine just the names. But because AQ was long regarded as a separate project, there are a lot of references to the 'flow' and the 'AQ' separately in older documents, or when people are not thinking in terms of Oracle approved a Naming Convention. For example, I almost never use "Streams AQ" because my brain still has the two separated. I guess in 3 or 4 years, I'll think of it as "Streams AQ", which means that Oracle will want to just rename by then (most likely to incorporate GoldenGate).

  11 g, water courses is available in the standard edition, but there are limits. For example, you can apply changes to an Enterprise edition database in the standard edition. But your capture options are limited to synchronous if my memory serves. Licenses for 11g Guide has more details, and there are some documents on Metalink that go into details.

  Justin

• Tecra A8 downgraded XP and none of the Toshiba Utilities works

  Hi all

  I just got a new Tecra A8 - it is downgraded to XP, and none of the Toshiba Utilities work (energy saving function keeys, keyboard shortcuts, etc.). When I try to reinstall - there is always an error message (missing dll or sth similar) - I tried to update the bios - couldn't - once again a missing file!

  any ideas how to solve this problem? at least the fn keys (fn key works - I see a light come on when I press - not the functions well!)

  your help, I much appreciated!

  see you soon,

  Dimitris

  Hi Dimitris

  May I ask you what Tecra A8?
  I visited the Toshiba driver page and it seems that Toshiba provide XP drivers for two different units A8 PTA83Eand PTA82E.

  You should be 100% sure that you are using the correct drivers!
  In addition, Toshiba released the Installation Instructions of the document on the page and to my knowledge it s necessary and important to follow this line of installation guide. The proper installation order is necessary!

  So take care and check again

• Help explain the flow meter VI

  After a lot of tinkering, I seem to have developed an effective VI for use with a type/pelton turbine flowmeter. The flow meter outputs a stream of pulses which

  can count on the counter of my 6501 line. Unfortunately this eureka moment happened somewhat by chance, and I'm hoping someone

  could be kind enough to explain step by step or in terms very simple for beginners (me) works of VI, thank you.

  Kind regards

  GER

  GER,

  Welcome to the Forums and LabVIEW.

  If you don't the have already made, please work through the tutorials online to get started with LabVIEW. The answers to some of the questions you may have are probably there.

  A brief description of your VI:

  1. the overall structure is a loop For. It works for the number of iterations that is connected to the Terminal in your case 5 N.

  2. the calendar of the loop is determined by the longest time required for any part of the code inside the loop execution. On the first iteration, the DAQ Assistant configures the counter and starts measurement. On all subsequent iterations, he reads everything simply an indictment. On these iterations, the 25 les 25 ms ms expect will dominate. This VI runs approximately 40 iterations per second (for 5 iterations).

  This means that the program will take place on 5 * 25 ms = 0.125 sec and then stops. If you run for more 1/8 of a second to help run it continuously button, STOP. Which is intended for certain types of troubleshooting only.

  3. the table of waveform and the flow rate meter only shows the last value of the five iterations. (This suggests also that you use run continuously)

  4. the registers at offset in this VI nothing do. The upper shift register calculates the cumulative number of the flow meter, but the result is never used. The underpass registry has nothing connected to the Terminal inside the loop on the left. It could be replaced by a terminal.

  Suggestions:

  1. in order to avoid using run continuously, replace the loop with a while for loop. Add a stop button on the front panel and connect it to the stop it real terminal in the loop. Move the graphic terminals of waveform and flow inside the loop.

  2 check your pulse to the algorithm of flow rate. The time for the count interval must be considered.  For example if the meter registers 25 pulse in 25 Member States, which represents 1 000 pulses per second. This isn't which will show your VI.

  3. see examples of code that uses counters.

  Lynn

• Controlling the flow of data

  Hello

  I'm working on a program in which I have to control the flow of data on the wires.

  The task is that the data should not pass until a given value is generated. And the program remains the playback thread until this value is generated.

  While the value received, now the passage of data to all loop regardless the data that is generated on.

  That's why I created two loops while we research this value and the other is the principal who must perform processing when the specified value is generated (taken in the first loop).

  It could also say that "wait until the reception of a certain value.

  

  The first loop is created just to wait until a value of 3.

  The second loop is the principal who must deal with.

  
  

• How to change the value of string clustered, to implement using the node value of property instead of writing directly on the flow of data or using the variable

  new to labview :-) and I have a problem when I want to change the value of a string in bunches, and I want to implement this using the node value of property instead of writing directly to the stream or by using the variable, enclosed is the picture.   No matter, I have change in cluster (control) or value of Popery out (indicator) cluster, the value (sensor 7) dataflow keeps unchanged even I gave the new value by value of property node. Thank you to give me some advice about this.

  

  Hi GerdW

  Thanks a lot for your answer. The reason I'm stubbornly tring to break the flow of DATA is: we have a test system that have about 100 screws, they have a few connected flow, some of them will be unbundling a cluster dataflow chain to check the value in order to make the different cases.  Now I want to insert user event by changing the control and influential cases during run time.

  As I initially uses a global variable (to control cases) instead of unbundle string data flow, it works well.  But then, I found there are a lot of screws that are using the string unbundle.  One of the 'lazy' means, I tried is to change the value via the property node (because that way, I did not need to find all the places where using the unbundle string and replace them with the global variable), then I noticed a problem with "dataflow", the value in the stream of cluster in fact will not be changed by changing the value of the property node.

  I did a test with VI simple (like the picture in last post), and after reading your advice, I tell myself that I need to understand the concept of "DATAFLOW" in labview, it seems that my "lazy" way can not work in this scenario.

  I have attached the criterion VI here, have you furthur suggestions on what I can do in this case?

  Mant thanks!

  Minyi