GUY! CLEAN YOUR "HOSTS" FILE - this is the SOLUTION!

Similar Questions

• "Your host does not support the current settings for comments.

  My requirement of virtualization are demanding very high resolution on a Win2000, ESXi host guest.  I upgraded, using the stand-alone version of converts, but I can no longer switch to full-screen (the scale).  I get the following message:

  -

  ---

  Error

  -

  ---

  Connection error: your host does not support the current settings of comments in mode full-screen.  Try to reduce the color depth or resolution of your guest and try again.

  Impossible to enter full screen mode.

  Do you want to retry?

  -

  ---

  Yes No

  -

  ---

  Does perform a work around?

  Thank you

  Alan

  The vSphere client is a terrible Viewer. Very slow. W2K is also a limitation. Take a look at the other viewers if RDP is not suitable. Radmin is one I've used several years ago.

• should I trust to clean your hard drive with all the files listed?

  I'm working through Windows Vista, step by step manual. I have a question on system and maintenance > administrative tools > free space disk (also called "Disk Cleanup").

  I want to clean my hard drive to free up space and improve performance by using this feature.

  I'm in the box to answer when you check in the files, that you need more, or not deleted on a conclusion of programs.

  in any case, I want to check a box for "temporary files" that amount to 8 gigabytes of memory.

  How do you know if it is safe to do so?

  could I be delete something important?

  I would just leave it be?

  I looked at windows vista help on this, and he said that you can safely delete temporary files that have not been modified in over a week.

  However, I see no list of dates in the box diologe/check page.

  any ideas anyone?

  Yes you can trust disk cleanup to safely remove your files, otherwise the option is not there.

  Confusion between Yes! but it removes only the files that have not been modified in over a week.

  Your computer will run faster and better especially with 8 GB free.

  You can manually delete these files if you wish and also see and choose only those that you want to remove.

  To do this: open the box run by pressing the Windows Logo key and the R key.

  Type: folder and OK or enter.

  You can sort by update for a better choice.

  To do this: click view on the menu, point on group BY and click Update, if the descendant is not chosen to go back and click on it.

  Alternatively, you can delete the temporary files that way:

  Open race box, type: temp, OK, you can delete everything, and if windows needs some we won't let you delete those he needs.

  Open, run, and type: recent, you can remove all if you like or keep those you want to if you use recent items on the start menu.

• If your SWF file is resized the code your FLA? And playing SWF in browsers (crop)?

  Is it possible to ActionScript 3 code in your FLA file when you export your SWF file and view it people is at a size smaller than the size I created (proportionally).

  Also, I've always wanted to know, and I have yet to find someone who knows the answer. Is it possible to have an art that, outside limits of your SWF (size of your FLA document) do not show in the browser. So if I was a bird flying into a 300 x 300 document, it would show a bird outside 300 x 300. The only solution I can think of is drawing white apart from the size of my document boxes so that it looks like the white background of the browser.

  Thanks a lot for your help.

  You can use a listener to resize the stage to customize your swf for any browser size.

  anything behind the scenes in a main swf file will be displayed.  Backstage articles are displayed if the swf file is loaded in another.  Use a mask to avoid this.

• What is the correct way or better to manage your site files according to the folder of your site?

  I apologize if this seems to be a silly question but I'm still having trouble getting my head around the management of files when using dreamweaver. I know that I am supposed to create a root folder that I created on my desktop. All of my sites that I have here in create in dreamweaver go to sub files in this main file or am I supposed to have several root file?

  Ive assumed I create a single up to that point. However I have other questions... for example when I create a fluid grid site I go through the steps of creating first my folder under this new site in my account from the main root for dreamweaver, save my css inside file when asked, and then I save the html file main Sub ' save under ' as well... However, as you know, creates then two files separate, 'catch-all' and 'response' but instead of placing them in my folder of pennies for this site, he places them in the root file instead of in the subfolder that is located in the file root (if necessary). If I manually move them to the sub folder to keep things tidy this will mess up my files? Dreamweaver will be able to go to search folder under rather than the file root where he keeps putting automatically their?

  Or I have the complete wrong end of the stick to understand how to make the management of the work all together?

  Any help greatly appreciated

  Ed

  OK so just to clarify. Each site actually has its own root folder and simply for the love of the organizations you place all of your files to the root of each site in a larger folder which in your case is called 'sites '.

  Exactly that.

  My confusion is that dreamweaver seems to have everything automatically create new site, I try to go in a root folder, I created a site earlier. That's why I guess you don't have that one folder root and all of your different sites exist within of the it.

  Ignore this. I see sometimes that happens as well. But because you browse to find the folder new root of the site in any case, it is imminent can be ignored!

  -I created a new folder outside of dreamweaver on my desk first who must accommodate all that documents sites. I was the creation of each new folder in what I thought, it's the main single root for dreamweaver folder that was on my desktop up to this point.

  There is no "single root for dreamweaver folder. As you might have guessed, each site has its own root folder and root each folder contains * all * files that make up this particular site. ***

  -J' then I open dreamweaver and will create a new site layout fluid grid

  -He asks me to save my css somwhere... I save in my new site folder (I now know what will be the root folder of my sites that each website has its own root folder)

  All my sites have a "_css" at the root folder. I precede these files with an underscore so that this and other like him (for example '_img', "_scripts", etc.) will sort together, and at the top of the list of files. This issue of _css in the root of this site, this is where I would put the stylesheet quote you. ***

  -When he opens all I go to 'file' and ' save under ' so that I can put the HTML in the document in my root folder as well. (don't forget this root folder is sitting in another folder called "root folder" but you assume I simply call 'sites' in this example.)

  So. ***

  -When I do this the html records in the folder root of the site as I hope.

  -However, dreamweaver application also my permission to create two new documents as mentioned (boilerlate and respond). Despite me trying to click the folder root of sites and it saves the documents it contains, like the rest, he saves instead what is in your folder "websites" in this example... next to the folder root of sites that i would have it should be in (not... correct me if I'm wrong)

  Well, this suggests that you have not set the root folder properly. These two files must be saved in the root of the site. If this location is not what you are talking about as the root of the site, then something is wrong.

  Why do you think that what is happening? or is it supposed to? I would have thought not myself.

  as I side question while I'm here... when I see that my css or js documents have been saved in the wrong place, as I assume they were in the example above... How can I change the location of their in dreamweaver so that dreamweaver knows where they have been moved to? I know not how to do for the HTML document main because its easily done using "save under" on the file menu, but I'm not sure how do for the other document that dreamweaver creates something like a checkerboard to fluid.

  Sorry... I'm sure it's painful for those who know how... but I'd love to get my head around things like basic

  The best way to change the location of all files used in a DW site is to use the DW files Panel to drag - move these files to the desired location. Management of DW links will kick when you do this and adjust all the existing links to these files to accommodate your move. ***

  Here is a series of images that show the process to create a new site-

  THE NEW PROCESS OF SITE

  

  NAME of THE SITE, THEN BROWSE to THE NEW LOCATION for THE ROOT (this image shows the starting state of those that have been done before)

  

  NAVIGATE TO THE FOLDER OF YOUR NEW SITE WILL BE CREATED IN WHICH

  

  BY CLICKING THE NEW FOLDER OPTION, YOU CREATE THE NEW SITE ROOT FOLDER AND THEN CHOOSE IT

  

  I CREATED TWO NEW FILES IN THE ROOT FOLDER THAT WILL HOST MY CSS AND IMAGES RESPECTIVELY

  

  After SELECTING THE NEW ROOT FOLDER of the SITE AND clicking 'Choose' I SEE THE DIALOGUE START WITH THE path box to ACCESS CORRECT WORMS CE FOLDER ROOT IN THE FIELD RECORD of SITE LOCAL

  

  I hope that helps!

• To list VM, cluster, hosts, files, path of the vmdk file

  Hi all

  Someone at - it a working script for the above?

  I'm in 4.1

  Thanks in advance

  Hello

  You can try this:

  $AuditVM = @)

  ForEach ($vm in (Get-Cluster |)) Get - VM)) {}

  foreach ($vmguest in @($vm |) (Get - VMguest)) {}

  foreach ($cluster in @($vm |) Get - Cluster)) {}

  foreach ($datastore in @(Get-VM $vm |) Get - Datastore)) {}

  foreach ($Network in @(Get-VM $vm |) Get - NetworkAdapter)) {}

  $objGuest = "" | Select the State, name, CPU, memory, IPAddress, OSFullName, Cluster, file, UsedspaceGB, store data, Description, MacAddress, path, NetworkName, NIC

  $objGuest.State = $vmguest.state

  $objGuest.CPU = $vm. NumCPU

  $objGuest.Memory = $vm. MemoryMB

  $objGuest.Description = $vm. Notes

  $objGuest.Folder = $vm. Folder

  $objGuest.Name = $vm. Name

  $objGuest.IPAddress = [string]: join (',', $vmguest.) IPAddress)

  $objGuest.OSFullName = $vmguest. OSFullName

  $objGuest.UsedSpaceGb = $vm. UsedSpaceGB

  $objGuest.Cluster = $cluster. Name

  $objGuest.Datastore = $datastore. Name

  $objGuest.MacAddress = $Network.MacAddress

  $objGuest.Path = $vm. Extensiondata.Config.Files.VmPathName

  $objGuest.NetworkName = $Network.NetworkName

  $objGuest.NetworkAdapter = $Network.Name

  $AuditVM += $objGuest

  }

  }

  }

  }

  }

  $AuditVM

  Kind regards

  Julien

• During the installation of 6 Lightroom I get the following error code. How can I fix this. The solution is given by the error code does not work. Thank you very much Exit Code: 7

  Exit code: 7
  Please see specific errors below for troubleshooting. For example, the ERROR:

  
  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 6 (s)

  -Payload: Microsoft Visual C++ 2008 Redistributable Package (x 64) 9.0.30729.5677 {512B6D21-18F9-11E2-93C1-00215AEA26C9}.

  ERROR: Cannot install Microsoft Visual C++ 2008 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "E:\Win files\payloads\Microsoft VC 2008 Redist (x 64) support \vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x 64) Microsoft Web site - www.microsoft.com

  -Payload: Microsoft Visual C++ 2008 Redistributable Package (x 86) 9.0.30729.5677 {539B5BB0-18F9-11E2-BBBC-00215AEA26C9}.

  ERROR: Cannot install Microsoft Visual C++ 2008 Redistributable Package (x 86). Please try to install by double-clicking the executable file to "E:\Win support VC 2008 Redist (x 86) files\payloads\Microsoft \vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x 86) Microsoft Web site - www.microsoft.com

  -Payload: Package redistributable Microsoft Visual C++ 2010 (x 64) 10.0.40219.325 {54B0C34F-18F9-11E2-BC1D-00215AEA26C9}.

  ERROR: Cannot install the Package redistributable Microsoft Visual C++ 2010 (x 64). Please try to install by double-clicking the executable file to "E:\Win files\payloads\Microsoft VC 2010 Redist (x 64) support \vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x 64) Microsoft Web site - www.microsoft.com

  -Payload: Package redistributable Microsoft Visual C++ 2010 (x 86) 10.0.40219.325 {55B82130-18F9-11E2-8D43-00215AEA26C9}.

  ERROR: Cannot install the Package redistributable Microsoft Visual C++ 2010 (x 86). Please try to install by double-clicking the executable file to "E:\Win support VC 2010 Redist (x 86) files\payloads\Microsoft \vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x 86) Microsoft Web site - www.microsoft.com

  -Payload: Package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}.

  ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "E:\Win files\payloads\Microsoft VC 2012 Redist (x 64) support \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com

  -Payload: Package redistributable Microsoft Visual C++ 2012 (x 86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC}.

  ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 86). Please try to install by double-clicking the executable file to "E:\Win support VC 2012 Redist (x 86) files\payloads\Microsoft \vcredist_x86.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 86) from the Microsoft Web site - www.microsoft.com

  -------------------------------------------------------------------------------------

  
  The system configuration required

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• I need to change the host file in Windows\System32\drivers\etc but I get an error message telling me that I need administrator privileges to do this.

  I use Windows 7 on a Toshiba laptop. I am logged in as Administrator group member why not I have permissions to modify the file (I need to add an IP address to the list)?

  I never had this problem when using XP, so why are administrator permissions so darn limited in Windows 7? And why does the system not recognize me as a member of the Administrators group? It's so frustrating.

  Windows 7 UAC (User Account Control) prevents rogue programs do things behind your back. Click Start / Help, then look for help on UAC learn more.

  To change your hosts file, follow these steps:
  1. Locate Notepad in your Start menu or in the System32 folder.
  2. Right-click.
  3. Left click run as administrator.
  4. Open the hosts file, edit and save it.

• Corrected the host file corrupted, now showing 2 host files in XP

  I have a corrupt host file and 2 host files have now for some reason any. What to do to fix this?

  After explaining all this several times, here are some notes:

  The hosts file is a read-only file, hidden system.  It is just a text file that you can manipulate with WordPad, Notepad or any text editor.  Before you modify the hosts file, make a copy of the current in case you need to restore the original.

  The hosts file is (or should be) a file read-only, which means that if change you it, you will not be able to save the changes until you remove the read only attribute of the file.

  You may be able to create a new one or reset your hosts with Microsoft Help file:

  http://support.Microsoft.com/kb/972034 (this does work as expected the last time I tried).

  If you use the Fix It from Microsoft, you will have no hosts file when you're done (which is not necessarily a bad thing) so you can just read and follow the instructions to find out how to fix it yourself.

  Some third-party software analysis tools (like Spybot) may add entries to the hosts file on purpose to block your browser from loading WWW websites completely or block ads from certain sites WWW.  They claim to have a list of sites that most of the people want to block and insert them into your file hosts for you.  You can always delete the entries in the hosts file manually if you wish.

  Another good option to block ads sites is to use Firefox with the Adblock Plus extension (it is updated regularly with new sites).  If you use that combination, you don't have to worry about your hosts file and these two together really do a good job.

  Malware can also add entries in the host file to redirect the browser to another site than the one you really want to visit WWW.

  For example, if you try to browse to www.google.com, you can find yourself on a WWW site that is inappropriate or simply an advertisement for a product you never heard and do not want.  Your browser will always be redirected away from www.google.com until correct you the hosts file.

  The malware can also modify your hosts file to block your browser to go to Web sites where you might find a solution for how to remove the malicious software.  The malware sometimes knows what you're going to try to find and remove, so it will prevent you to do so.

  If your hosts file has been manipulated by malware, edit the hosts file does not remove the malware.  You will still need to scan your system with software tools to make sure that the malware has entirely disappeared.

  Malware analysis tools can also remove the malicious software and leave the bad entries in the hosts file.  Analytical tools cannot tell if the entries in the file hosts were made on purpose or by malware you still may need to edit the file hosts manually in case of redirection of the browser once the malware has been removed.

  Some analytical tools will report changes to the hosts as a suspect file and allow you to review the changes and allow you to decide whether the changes are appropriate, and to take action.

  Sometimes, analytical tools cannot tell if the entries in the hosts file have been put there by malicious software or you put there on purpose so cannot do not report any problems with the hosts file.  This does not mean that the hosts file has not been adjusted by malicious software.

  A hosts file is not required for your browser to operate.  If you suspect a problem with the hosts file, you can rename the hosts file and test your browsing without it.

  Always reboot your system and the navigation test after making changes to the hosts file.

  To manipulate the hosts file, you need to make hidden files not hidden and remove the attribute only read the hosts file.

  In Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):

  c:\Windows\system32\drivers\etc

  Click on tools. Of files, display options.  In advanced settings, enable (check) the box option for:

  Display the hidden files and folders

  Click OK.

  The hosts file has also no extension (for example, .exe or .doc) and it may be useful to also see the file extensions for all files in
  the folder.  While you adjust the display of folder options, bring up the file extensions.

  Click on tools, Options, view.  In advanced settings, clear (uncheck) the box:

  Hide extensions of known file types

  Click OK.

  Now the hosts file must be visible and you can also see the file extensions.

  Make a copy of the current hosts file and name the copy something he can remember so that you can find it later and cancel
  any change if the changes don't work or things get worse.

  The host file is usually a single reading, so to change it, you must remove the read-only attribute:

  Make a right-click the hosts file, properties, uncheck the box that says:

  Read-only

  Click OK.

  Now you can edit the hosts file with a text editor (Notepad, Wordpad).  Be sure to save the hosts file after any changes.

  You will need to decide what is in your hosts file.  The default hosts file has only one entry (and a lot of comments) so if you think that the hosts file are the part of your question, you can remove all but the default entry and save the file.

  Always reboot your system and the navigation test after making changes to the hosts file.

  You should make hosts read-only folder again when you are finished making changes.  Obviously some programs or malware do not pay attention to the attributes of a file read-only, but it is advisable for the host file to be unalterable.

  If you want to, reverse explore changes to hide system files and extensions of known file types.

  If you think your hosts file is irretrievably, replace the contents with the default values of Windows.

  The default for Windows XP hosts file looks like this:

  # Copyright (c) 1993-1999 Microsoft Corp.
  #
  # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
  #
  # This file contains the mappings of IP addresses to host names. Each
  # entry should be kept on an individual line. The IP address must
  # be placed in the first column, followed by the corresponding host name.
  # The IP address and the host name should be separated by at least one
  space #.
  #
  # In addition, comments (such as these) may be inserted on individual
  # lines or following the name of the machine indicated by a symbol "#".
  #
  # For example:
  #
  # 102.54.94.97 rhino.acme.com # source server
  # 38.25.63.10 x.acme.com # x client host

  127.0.0.1 localhost

  There are places on the Internet to download information to your hosts file which is based on what other people think your hosts file must block or allow for your Internet browsing.  Sometimes that works very well, but you now need to know more on the manipulation of the hosts file now so that you can decide what's best for your environment.

  Here's some additional reading on how to manipulate your hosts file:

  http://www.MVPs.org/winhelp2002/hosts.htm

  This is a user-friendly tool with a graphical interface (GUI) to help you work on your hosts file:

  http://www.Funkytoad.com/index.php?option=com_content&ID=13

• Why the hosts file is reset periodically?

  Hello, I would like to redirect an IP address to a localhost, but whenever something comes back the original contents of the hosts file.

  I open windows/system32/drivers/etc/hosts with Notepad under run as administrator, and then make a change in the hosts file. All new Vett are redirecting to localhost (127.0.0.1), but suddenly some time my hosts file is returned to the original state.

  My system runs Windows Vista x 64-bit edition.
  What can change my hosts file and how to make a constant change in it?

  Best regards
  Voronkov Konstantin

  Konstantin,

  I'm not familiar with VPNS modifying the file hosts as Brian suggested. Also, VPNS are a bit outside the scope of support here in answers and if you need more information about the VPN, I would recommend display in TechNet Windows Vista Networking:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

  From personal experience, I find some antivirus software will monitor and restore the hosts file. If the host file is always reset to 0, you can perform a clean boot, use the system and see if the file resets. If not, it means that something in startup is reset the hosts file and from there you can determine what startup item is causing the problem.

  Check out the link below for instructions to boot:

  http://support.Microsoft.com/kb/929135

  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I connect to Photoshop CC I still can't go to the program - I need to change the host file?

  When I connect to Photoshop CC I still can't go to the program - I need to change the host file?

  Please follow it mentioned below as follows:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 reset the hosts - IP addresses redirected file may prevent you to complete the authorization process.

  • Run the host file fix in the cleaning CC tool.
  • Reset the file hosts manually.

  4 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  5 - raise the cloud creative app and connect

  Let us know if that helps.

• Impossible to locate [EssbaseServer] in the Hosts file

  I installed the Essbase 11 system and got the following error message when I try to create an application in one of the Essbase servers:
  
  Error: 1042003: error network [11004]: could not find [EssServerName] in the Hosts file
  
  I did 'essmsh' and connect with my login and my pw on the local host and it worked well, was able to connect without any problems. The user/pw that I use is the lack of administration.
  
  I don't understand the issue here.
  
  No indication as to what happens "behind the scenes" here and how can I solve this problem? What is the file Hosts the role by connecting to Essbase Server?
  
  Published by: EssbaseApprentice on October 27, 2010 10:21

  If there is a set a single machine, go to your hosts file and point your name of Essbase server on 127.0.0.1. That should do the trick.

• Cannot change the Vista hosts file

  I started Notepad as administrator and open my hosts file, made my changes, but when I try to save it I get this message: cannot create the c:\windows\system32\drivers\etc\hosts file verify that the path and the name are correct

  How to save this file? Thanks for any help!

  Hello

  The host files are linked to the internet explore and this is why it must be very careful when you change them. And this is the reason why they were safe as to change. We have a FixIT tool to assign default host files. It's here.
  http://support.Microsoft.com/kb/972034 also, here is the article that explains how to change the host files and the Lmhosts file in Windows Vista and Windows 7. You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/923947

   

  I hope this information helps you!

• Change the configuration of DNS host file SCAN

  We have a 2-node rac configuration on our machine. When it was created first, use host file to set the IP name and scan scan because our DNS is not yet ready.

  The DNS is now ready, and when we do nslookup, we are able to see the name of scan & IP.

  How can we migrate the scan configuration to use DNS? Will be just comment on our values of host works file?

  Thank you

  In the case of linux, it is necessary to:

  1. set your DNS servers in/etc/resolve or the NETWORK card configuration file.

  2. check name resolution.

  3. definitions of SCAN comment in the hosts file.

• Is it possible to download a file google html to reference his website when your host his businesscatalist

  Is it possible to download a file google html to reference his website when your host his businesscatalist and the site build with muse

  Please refer to a similar debate here:

  https://forums.Adobe.com/message/5940490

  Thank you

  Sanjit