Gw not compiled basic Windows 7 XP mode

Similar Questions

• HP Pavilion dv9330us STOP: 0 X 00000116 (0X872C4AB0, 0X8A9C30, 0x00000000, 0x00000002)... Could not load even windows in safe mode after full system restore.

  I have a Pavillion dv9330us laptop.  My computer crashed after an update has been installed automatically.  I did a complete system restore.  After completing the restoration I was downloading all updates.  after SP2 updates are available.  The computer crashed again after the installation of one of the most recent updates.  The update was probably an update of graphs, I have done research.  Now my computer does not load windows.  I get the BSOD and cannot access the windows at all, not even in safe mode.  I can't do anything for drivers or anything else because I can't even access my computer in cmd mode.  The error code is STOP: 0 X 00000116 (0X872C4AB0, 0X8A9C30, 0x00000000, 0x00000002)...

  NVLDDMKM. SYS - address 8A9C30 base at 8A9C0000, DateStamp 4578eca9

  Help, please... HP says they can do a refurb more money that the laptop is worth.

  Hi Volatus,

  I would say lets you do a system restore using the Windows Vista DVD to one hour before the update that has the problem of the installation and check if you are able to boot.

  What are the system recovery options in Windows Vista?

  I hope this helps.

• How to not show the windows in safe mode (pop-up), start in safe mode

  Firefox Safe mode

               Safe Mode is a special mode of Firefox that can be used to troubleshoot issues.
               Your add-ons and custom settings will be temporarily disabled. You can also Reset Firefox if you want to start fresh.
                                                                           Start in Safe Mode           Reset Firefox
  

  This window I want to cancel whenever I want to use the command line

  "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -safe-mode  How to do it? Thanks
  

  There is a pref extensions.enabledAddons you can find on the topic: config page.

  One possibility would be to have two versions of a user.js file to initialize this pref with extensions installed and enabled and copy one you need by launching Firefox via a cmd file.
  If you are that tight on memory, then you only need to run a version at the time.

  • http://KB.mozillazine.org/user.js_file

  It is Pref plugin.state to disable plugins in case you want to do the same, but plugins are used when you visit pages that use them and affecting all the plugins for "Ask to activate" should suffice.

• a preparation free gata with GK Publications cd does not run on windows 7 Home Basic.

  A cd of free door preparation with GK Publications does not run on windows 7 Home Basic.

  I have buyed a book for the preparation of the door named GK Department with a cd inside, it includes the series of door documents test to practice. But it is to create an error message problem showing that Microsoft.jet.OLEDB.4.0' is not regestered on the local computer.    Please sort out the problem as soon as possible.

  Hi preyashi,

  Thanks for posting your question in the Microsoft community forum!

  I understand that you are having problems running a program from a CD on your computer. I'll help you solve the problem. To be able to understand the question in a better way, I would like to ask you a few questions.

  (1) did you make any changes before the show?

  (2) you are able to run the other Setup program on your computer?

  Senario 1:

  See if it is compatible with Windows 7.

  If this isn't the case, you could try installing in compatibility mode for Windows Vista or Windows XP.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program.

  (2) click on Properties.

  (3) click on the tab compatibility.

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and run the program compatibility problems:

  1. open the troubleshooting program compatibility Troubleshooter by clicking the Start button.

  Then click on Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  Senario 2:

  The behavior you describe is expected if your application runs in 64-bit mode, all components that use must also be 64-bit. There is no 64-bit Jet OLE DB Provider, so that you get the message as described. You will receive a similar error when you try to connect to a database by using OLE DB or ODBC if there is no 64-bit of the specified OLE DB provider or ODBC driver version.

  This problem occurs only in applications that run in 64-bit mode. Compiling the application so that it works only in 32-bit mode is the current best solution.

  You may need to contact the manufacturer of the program to find out how to set the path target to x 86.

  More information

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• Why the browser (FF42) is not as it is in navigation mode in a normal window on a mac?

  Based on article at https://support.mozilla.org/en-US/kb/control-center-site-privacy-and-security-firefox that the screen should display only in the center of control in private browsing mode. However, on a Mac, this shield appears (and it is functional) in private browsing mode and must not be used on websites that have integrated a twitter calendar to see this content. On a computer Windows, the shield appears only in private browsing mode and not in mode private, there is no shield and integrated twitter timelines appear as they should. Is this a bug on the Mac of FF42 version?

  UPDATE: problem solved

  Thanks jscher2000.

  My problem was that the protection of follow-up (and "shield)' appears in a window that was not a private window - as a result, your step #1 did nothing to correct my problem (I had already tried that before).

  The solution to my problem was just check and correct the following:

  "Default settings:"

     privacy.trackingprotection.enabled = false
     privacy.trackingprotection.pbmode.enabled = true  "
  

  .. .as by the post I linked above ( https://support.mozilla.org/en-US/questions/1092893#answer-803473 ).

  Thanks for the info that may help others in the hope of solving a similar problem.

• Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not what should be checked in t

  Question... I was not able to take tab FireFox Mode... you have eliminated the possibility of moving from a 2 window... If not, what needs to be checked in the menu options for mode 2 window window... I use Version 23.0.1

  Hi gordie, you could use an addon to restore this configuration of the user interface: https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/

• Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode,

  Please help with the problem of itunes

  Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode or if windows install is not installed correctly "...  I tried everything that the computer does not work please help as soon as possible, thank you

  Hello

  • What version of Windows are you using?
  • This happens with this program only?
  • What were the changes made before the problem occurred?
  You can check this link:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• Windows XP safe mode does not

  The computer, I work with the University running windows xp sp2, not authentic and is infected with several viruses and to among which are Sality.AT and Hikjav! INF and Hikjav! At and some more... I had Avira installed on the computer and I uninstalled and installed NOD32 today, I tried to analyze your computer in safe mode I discovered safe mode works not at all, whenever I tried running safe mode, I was sent to the page asking if I want to start windows normally or in safe mode... I don't know if scan with NOD32 will help me and it removes all viruses and the to tho I should mention especially, he found the virus Sality.AT in partitions on my hard drive. I discovered that the computer is infected with the virus and worms, when I used my flash at home on my computer when I use MSE as protection program... I thank your help and let me know what I need to do...

  Thanks in advance...

  Kind regards

  Zeinab

  Is that you are not able to start in safe mode, and then try the other options such as N/W and safe mode with command in safe mode prompt.

  In SafeMode with command prompt when you have the command window press Ctrl + SHIFT + ESC to open the Manager tasks, then click on file-> new task-> Type EXPLORER. EXE and press the ENTER key. Close the Task Manager and you will be able to see the desktop.

  If you are still not able to start then do a system restore to restore the computer to an earlier date when the computer was working fine and then run a scan for malware removal.

  If you want to work in normal mode to remove the virus then try Microsoft online safety analysis, which manages similar definitions than MSE

  Security scanner: http://onecare.live.com/site/en-us/default.htm

  Or you can also run a scan with Kaspersky AVP tool:

  http://devbuilds.Kaspersky-Labs.com/devbuilds/AVPTool/

  Touhami

• After the installation of Windows Vista, I get this error: winload.exe tries to load a 64-bit application, but this processor is not compatible with the 64-bit mode.

  I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:

  Winload.exe

  Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?

  Thank you

  Ryan

  Hello

  Do a clean install of XP with the XP disk provided by Dell, if you.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.

  They should do this for a small fee.

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Vista installation was able to destroy this option of relocation:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP

  See you soon.

• Using Dev - C++ 5.0 beta 9.2 (4.9.9.2) on Windows Vista. Nothing does not compile.

  I'm trying to use Dev - c++ on windows vista. the program installs fine
  but when I run the application, it gives a message below
  IT IS NOT GNU MAKE FILE IN THE PATH OR THE BIN FILE
  .
  .
  .
  NOTHING WILL BE COMPILED

  and when I write a code and try to compile n run it message "SOURCE FILE NOT COMPILE.

  do I have a problem with my operating system

  According to the Director, Bloodshed.net, it is not compatible with Windows Vista http://www.bloodshed.net/download.html. I got it running (and do everything else) while following the instructions here: http://www.cs.okstate.edu/~katchou/devcpp-vista-dirs/devcpp.htm.
  I hope this helps.

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• I've upgraded to window 10, but not happy with windows 10 I returned to windows 7, but I'm unable to log on to the pc. the pointer of the mouse and keyboard are frozen device, even in safe mode.

  After the upgrade to windows 10, I loved not the style was thus to Windows 7, but I have not been able to log on the PC since. He's going through commissioning, but when on screen password box the pointer of the mouse and keyboard do not respond.

  This happens in safe mode for.

  The PC is a Sony Vaio laptop.

  Any suggestions,.

  John

  Hello Orwell,

  Thanks for posting your query in Microsoft Community.

  You have a Windows 7 installation disc?

  As you cannot start your computer at all, I suggest to run a Startup Repair to repair the damaged boot system files and try to boot into normal mode. See the section: How to use Startup Repair in the following link.

  Startup Repair: frequently asked questions

  If this does not help, try to boot from a disc to install Windows 7 on the Windows recovery environment mode and then try to run the Startup Repair tool and check if you are able to start normally with mouse and keyboard.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Older webcams do not work in windows 7. even in compatibility mode

  Hello!  great to have a forum here to fix my problem!

  I have an old Logitech QuickCAM Express V - UH9 that doesn't seem not detected by Windows 7 (64-bit).  Older drivers do not work in compatibility mode, and also auto-detection does not seem to find a driver to make it.  The software seems installs successfully but then again just to plug in my webcam (I tried all the usb ports I have on my computer).  I have another webcam which has the same problems (more detail).

  I'm guessing that his could be a trend with the older webcams?

  Help, please! I would like for my hardware work under win7... I had a pretty good luck with everything.

  Bravo and thank you!

  Hello

  Try this - check with Logitech QuickCAM Express V - UH9 is compatible with Windows 7 or not.

  Also take a look at: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx

  Need more help, come back to me.

  See you soon.

• I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I try the windows XP mode and it tells me that I need to connect a hardware device 3D

  I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I have try on windows XP mode and it tells me that I need to connect a hardware 3D device. I really love the game and I want to use it again.

  Any old copy of Windows XP that could be installed in the host system? If you do not, it should be available at a modest price of an online seller. Perhaps (I'm not too), even an old Windows 98 TO work. The game (using a 3D engine) will not work under pure DOS, so you need a Windows environment so that it can work. Just FYI: If you get this old classic to run, new issues may arise. Known are the "mss32.dll" runtime error (you may need to replace this file with the newer version of SW:KOTOR 1) and the issue of video cutscenes (the games uses an obsolete video codec, Smacker - either you find an old *.) DLLS for it or have you convert movies in a modern format).

  In conclusion: get old games to run on software/hardware modern (it is not only a problem of BONE) is one of the most fascinating and rewarding challenges to a real fan. But do not expect it will not be easy "out of the box" (or simply insert a CD).