H P and Dymo labelwriter printer are not recognized
I'm using Windows 7 Home Edition. My computer is an Intel I7 processor, 12 GB of Ram, hard disk of 1 to build custom.
I have a printer HP 6988 and a turbo labelwriter Dymo 400. Everything worked well and I had used both earlier.
Then I went to use the label writer and a message to a writer of the label must be installed and make sure it is connected.
Well it is connected, I disconnected and then reconnected and I hear the tone of the USB. The problem of the printer is essentially the same. I've had this problem once before, but can't remember what I did to remedy. I tried to reboot several times. I don't have the system restore option that I have no restore points. Don't forget to set up this feature before.
Thanks for your reply. I did an anti-malware scan and it found 27 bad entries. I removed those and everything works fine now. I have AVG anti-virus, it found 5 horses Trogan, but I found the fix before that. Thank you.
Tags: Windows
Similar Questions
-
Computer and a wireless printer are not more speaking
I have a HP wireless computer and the wireless printer. I spent my wireless router. Now, our building has gone wireless, and I connect to the internet through the router of the complex (somewhere in the building). But now my computer is not talking to the printer. How can I reconnect the two?
Hello
You get the error message? If Yes, what is the full and exact error message?
Method 1:
I suggest you check out the link and try to set up the printer:
Install a printer on a home network
http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network
Method 2:
If you encounter a problem after you set up the printer. See the article and check if that helps:
Solve printer problems
Let us know if it helps.
-
Photoes printed are not equal to calibrated screen
I have Photoshop CS3, calibrated screen (with x-rite eye - one display 2) all-in-one printer HP Photosmart 7283. The prints are not the same colors on my screen. How to solve this problem?
I see that the i1 offers a luminance target setting. Not only that, he has a prior calibration function that allows to use the OSD of the monitor controls to get as close as possible to the target before the calibration. It is the best way to do it.
Read the manual (you need to be in advanced mode). Then go to a target of 100-110 cd/m².
Fact.
Then go to the dialog box print in Photoshop. Under color management, click on 'Document '. It should say Adobe RGB.
Choose "Photoshop manages color".
Then, under "Profile of the printer" see if there is a that corresponds to the printer and the paper you are using. If not, this means that HP provides no profiles for this printer. In this case, you must use "Printer manages color" and the foregoing is questionable.
If there is, take it, and then click 'Print settings' to take you to the printer driver. Here, clear color printer (ICM off or similar) management. Again choose the correct paper type so that the printer use the right amount of ink.
That's all there is. I repeat myself just from this point. Basically, I said all this in the first post in the PS Windows forum.
-
Installed at El Capitan and now HP printer does not work via the network
Installed at El Capitan and now HP printer does not work via wireless network
Open system preferences > printers and Scanners and select the print tab.
Then the right or control click on the HP printer on the left then click: reset the printing system
-
New tab and close tab buttons are not enabled
Firefox new tab page and close tab buttons are not neabled and do a right-click shows the same functions that is not available.
Try Firefox SafeMode to see how it works there.
A way of solving problems, which disables most of the modules.
(If you use it, switch to the default theme).- You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
- Or use the Help menu option, click restart with the disabled... modules while Firefox is running.
Do not choose anything at the moment, just use 'continue in safe mode.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.
If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themesWhen find you what is causing that, please let us know. It might help others who have this problem.
-
I recently downloaded Lion and now my printer does not print.
I recently downloaded "Lion" and now my printer is not working. I keep getting "the printer is not connected.
Well Yes, the PowerPC software is dead and buried.
Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.Reset the printing system:
-Go to System Preferences > print & Scan
-Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks. -
HDD and dvd are not recognized in the configuration menu, what could be the problem?
The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f. What is a controller failure? A PCI controller can be used to replace the motherboard controller?
dhobs,
Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)
You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.
Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.
-
When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.
Hello1. how you try to install Service Pack 2?2. are you able to boot to the desktop?Method:Step 1: If you are able to start the computer in normal mode, then try a clean boot.To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: after troubleshooting, start the computer in normal mode.Step 2: Try to install Service Pack 2 manually.How to obtain the latest Windows Vista service pack
If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeIf you are unable to install Service pack 2, you can consult this article.Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
http://support.Microsoft.com/kb/949358Please note: method 2 refers about upgrade on site. Perform a repair installation/place will not damage files and applications that are currently installed on your computer. However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot. -
Support for Microsofts and printer is not recognized and said that it must be declared
Original title: Declare the printer in vb
Hello
Follow-up
HOW to: Trigger and control Visual Basic print dialog boxes
Support Microsofts and printer is not recognized and said that it must be declared. I tried their code for the example and it still says that this printer is not declared
Thank you
Dan
Hi Daniel,.
Thanks for posting your query in Microsoft Community.
I appreciate the effort you have taken to solve this problem yourself.
This problem is better suited in the MSDN forum. We have a dedicated team with advanced tools and permission to help with this issue. Then I suggest you to report the same query in MSDN forum.
https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=vbgeneral
Thank you.
-
I get this message your Skype name and password are not recognized what should I do
original title: Skype
I get this message your Skype name and password are not recognized what should I doLook at the Sticky Thread at the top of this page.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/where-do-i-get-Skype-support/3ae98b5e-566c-4D8C-B189-37b50e475539 -
I recently bought a new camera from Sony a7 - ii. the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7. What should I do to get these files imported as raw files?
Hi Bobsirkus,
The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.
Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices
You can use the DNG Converter, converts images and then import them into DNG in Lightroom.
Kind regards
Tanuj
-
I recently bought a Canon 5 d camera SR and when I imported the photos taken in RAW, Lightroom gave me the following message: "files are not recognized by the inLightroom of support for the RAW format (73)" what should I do?
Hello
Looks like you may not have the latest version of Lightroom as the Canon 5 d R raw files are supported in Lightroom 6.0 and above (not in previous versions)
-
Since the Windows 10 update, Adobe Reader XI and Microsoft Edge forms are not complete when opening a Web site. Why should I register to my computer before can fill them?
Hi kay3452,
Microsoft Edge is not compatible with the Acrobat/Reader plugins. Please try other web browsers.
Kind regards
Nicos
-
Can someone tell me why Lightroom cc wants to import my files under a DNG, I used to import as a raw file, it says the files are not recognized, I use a Canon 5 3 and never had the problem before, he said actually the Raw Format is not supported in Lightroom.
Thanks in advance John.
Hi, dj_paige,
I managed to sort it out, the problem was when I used my Kingston card reader to import my images in LR Cc, it would not recognize the file format, so when I thought a little more, tired of importing directly from my 5 d 3, it worked very well, so now I need to find a card reader supports LR CC ,
Thanks for your reply, regards, John.
-
Reinstalled dreamwever cc and now my extensions are not displayed. Any ideas? PS when I open the extensions manager that they are there
Hi the solution was that I had to reinstall all extensions, then they came. Thank you
Sincerely
Dennis Handa
DHManagement and PR
www.agentezsite.com
www.businessezsite.com
www.flarren.com
www.keysluxuryliving.com
321-956-4003.
2601 Reed Avenue
Melbourne, Fl 32901
Maybe you are looking for
-
A friend on FB said that if my URL box does not show as starting with https: (instead of http :) I am at risk of being hacked. I fixed it to FB, but all my other sites are coming as http:Is it really something to worry about?
-
Accessibility of the FN on Satellite L505
I have to question why Toshiba Satellite L505 13 X, FN buttons does not work on Windows 7 Home premium 64-bit operating system.I tried to reinstall the package added value & toshiba flash Cards, but it still does not work. and now I can not turn on w
-
Satellite A10 - problem of the fan and processor speed
Hello Recently, my computer stops and overheated while clunked there fan who told me that I had to clean the fan and the heat sink. I have it done, replaced everything and then turned back on my computer. The fan seems fine now except that it only li
-
Export the graph to image: a few questions
A few questions. (1) what does export average image "simplified"? (2) the invoke node export the Image export the image or simplified? (3) export the image to a .eps file, what I get is a picture of real vector graphic? Thank you
-
AVG is stuck in my computer and I can't go out with their solutions and downloads. It remains in the firewall and security and I tried all the downloads and more. I also tried serval programs that State they remove all the remaining elements of the