H & R Block at home

Similar Questions

• Error - Please insert a disc into the drive trying to open & H R Block at home software CD.

  Original title: XP will not launch my H & R Block at home software CD.

  I bought the & H R Block at home tax software to target and Windows XP will not launch the CD in a CD/DVD players.  I tried manually running the software, but whenever I get the response "Please insert a disk in the drive", even if the disk is in the drive.  I tried other CD and they work all including the H & R Block CD provided in the mail.  Any suggestions for ways I can manually launch the CD ROM?  I returned to the store and exchanged, and the second CD did the same thing.

  Hi AALLIS,

  You did it all change hardware or software on your machine before this problem?

  You can follow this link & check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  Hope the helps of information.

  Please post back and we do know.

• ClientServices to framework blocking my home screen?

  Recently, my home screen has been blocked. But when I tried to turn it back on to the it, he says that ClientServices to frame it was blocking and I needed to uninstall it. So I did, but this error message again.

  I've uninstalled and restarted the computer. I don't know what else to do.

  Hello

  1. could you give us the exact error message?
  2. by chance your computer is connected to a domain network?

  3. have you made changes on the computer recently?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  Step a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

   
  Step b. You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• blocks to home page Yahoo toolbar

  Just the last update and now my homepage partially block the Yahoo toolbar.

  What do you mean by 'partially block Yahoo Toolbar?'

  Can you give me a screenshot so I know what you see? Please see How to make a screenshot of my problem? to create a screenshot
  
  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

• Blocked VISTA home page

  Whenever I start my computer it gets stuck on the home page.  By pressing ctrl, alt, del moves the process, but it does not ask that if I want to go into a safe mode, it never ceases to move things forward.  It happens on both of our turn to computers.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  The foregoing is prerequisites them necessary.

  -----------------------------------------------

  Now, try to use a process of elimination to find the problem - because it happens on the two system think antivirus.
  programs of security/antispyware - updates of Windows - and in common startup programs.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I disable the "mixed content blocker' for a single Web site, for example, NYTimes?

  Until about 3 weeks ago, I saw the site of the New York Times a day with no content blocked by the Firefox browser. With recent updates in Firefox, the NYTimes site appears in a default form blocked, whenever I go to him. So, I have to manually disable the blocker mixed content Firefox to view the site Web of the NYTimes in the normal display mode. My only other option, right now, is to use a different browser (IE or Chrome), I want to do. Ask for help turn off the blocker of home for individual Web sites. Thank you.

  It is not possible.
  You can watch this extension:

  • https://addons.Mozilla.org/firefox/addon/toggle-mixed-active-content/
  • https://developer.Mozilla.org/security/MixedContent

• Vista does not like my H & R Block commercial software, HELP!

  My H & R Block program for individuals runs and prints well.  However I also H & R Block at home business for our company.  I printed a 1099 the other day with an error when I tried to print a checklist.  However, I took this morning to print another 1099 and it won't print anything.  I was also on the phone and the computer all day today with the support of H & R tech.  They say Vista doen't like something the program did.  The problems in the control panel section are saying APPCRASH and Stopped working.  These messages appear only when I try to print.  I really need someone to help.  I tried unistalling and reinstalling the program.

  Only H & R support can provide assistance on their program

• Download Ohio State problem

  When I try the download of my Ohio State that I paid with & H R Block at home Deluxe + e-file federal State I get the following error message: unable to connect ERROR SSL: bad server certificate or PC incorrrect date please check the date on your computer. Saved federal return and closed H & R Block at home, made sure that the date and the clock has the right day and time. Reopened the program to try to get the State program only that she either get the error again. Has started on Saturday, March 2, 2013, again Sunday, March 3, 2013 and once more on Sunday, March 3, 2013, always put the error message. Is there a problem with obtaining of the Ohio State program? Or should I try only in week H & R Block Office hours, or the business hours of the State of Ohio? grammyfigment

  Hello

  Welcome to the Microsoft Community Forums.

  According your description of issue I see that when you try to download the program of Ohio State, you get an error saying unable to connect ERROR SSL: bad server certificate.

  Could you please answer these questions to identify the issue?

  1. what browser you use to download the program of Ohio State?

  2. you are using the proxy settings?

  This problem can occur if Internet Explorer does not recognize the authority of the root of the SSL Web site, and the Proxy Automatic configuration file is configured to return another Proxy Server to the client. When Internet Explorer uses a proxy table and can't match the authority root servers secured with one local store, Internet Explorer adds internally the proxy used to created the connection to the list of server BadProxy in Internet Explorer. Internet Explorer then tries to communicate with the proxy in the table and if the next server is unavailable, Internet Explorer attempts to locate the server, and if this is not successful, it generates an error of navigation.

  If you use Internet Explorer, please try the steps in the following link and check if that works:

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  It will be useful.

  Retrieve information for assistance.

• No permission to write to the directory. (see WinFileWriterImpl::open())

  I installed H & R Block 2010 Home Premium on windows vista. I lived a kind of attack via the web, on my machine. After fixation by restoring to a previous restore point, when I click on the application of H & R to launch I get this:

  No authorization in writing to the directory.

  (see WinFileWriterImpl::open())

  I completely removed the app and reinstalled. I keep getting the same message every time I try to start the application. I think there must be a problem with windows vista.

  • I had the H & R block to introduce a brand new facility, did not work.
  • I installed to a new directory, opposed to the default location of request. did not work.

  Any ideas would be appreciated.

  Tried all the foregoing.  Did not work.  Spent 2 hours on the phone with support on R & H-block (they were VERY helpful and great to deal with).

  Finally, here is what worked for me.

  Copy (backup) your personal data in the file in a new directory.

  Uninstall the software (Federal and State if you have both).

  In the "Program Files" folder, delete the folder "HRBlock2010".

  In the "Program Data" folder (this is what I was missing at the top for me), go to the folder "TaxCut.  In that folder another folder is labeled "2010".  Delete the folder '2010 '.

  Reinstall the software.

  Double-click the shortcut and load your personal data file... Fact.

• Everytime I open Firefox I get a message: "an attempt to change your home page has been blocked" and firefox crashes

  Everytime I open Firefox I get a message: "an attempt to change your home page has been blocked" and firefox crashes.
  I unintalled (on my MAC) and reinstalled twice. Makes no difference. Any suggestions?

  Could you try starting Firefox in Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the option key when starting Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

  While you are in Mode without failure, you could copy a list of your extensions and paste them into an answer? The best place for this is the support information page - either:

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  Scroll down to the Extensions section, and then select from there until the end of the following table with the mouse and copy. Then paste into a response. It may seem a bit messy but don't worry, we're used to it.

  In addition, if you check your homepage settings, he changed? This article explains where to find that page preferences: start-up, homepage, tabs and download settings.

• Since the new update of firefox, I lost my pop up blocker and impossible to reinstall, my home page to open when I click on the n of the firefox browser cannot set

  Since the new update of firefox, I can't put my home page, it opens to a blank screen, I also lost my pop up blocker and I can't reinstall restore my computer to an earlier point and still can not set my homepage and restore my pop-up blocker. I tried all the suggestions and I still have this problem. Can you help me or do I uninstall mozilla firefox.

  • Backup and restore Firefox profiles information

  Then:
  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
  2. Once the download is complete, close all Firefox Windows (or open the Firefox menu

     

     Click the close button

     

     ).

  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.

  Please report to say if this helped you!

  Thank you.

• I get a "MALICIOUS URL BLOCKED" message when you connect to gmail or iGoogle home page, ONLY WITH FIREFOX (not with Internet Explorer). Help!

  For the past two weeks, whenever I connect to gmail or iGoogle home page I get a message from avast! Antivirus (free version) saying that it has detected a malicious site. This only happens when using Firefox. No message is displayed if I connect using Internet Explorer 8. I use Windows XP Pro Service Pack 3, avast! Version 6.0.1367 (updated daily), Mozilla Firefox 10.0. I also use Malware Anti-Malware and SUPER Anti Spyware, bytes that are also updated regularly. The only recent downloads in my system were version 10.0 of Firefox and Microsoft Updates. I even tried to roll back to version 9, no change or improvement. This is the URL that is blocked, as shown in the pop-up message: OBJECT: http://74.50.117.107/js/je.php?u=739ec4a2-4903-4c0d-aee6-bdb3d2cdb87c & a = 200 & i = 111 & s = 0 INFECTION: PROCESS URL: MAL: C:\Program Files\Mozilla Firefox\firefox.exe. What worries me, because it barely resembles the horizon, and I do not use IE, it is slower and does not include Ad Block, which I use a lot (apart from the fact that Microsoft is trying to push me to buy Windows 7 * IE9 does not work with XP *, which would require the upgrade my computer and for the moment there is no budget available.). I thank in advance for the help, you can send my way.

  Follow the suggestions mentioned in the following articles:

  • Clear the Cache and Cookies
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  Check and tell if its working.

  May not be related to your problem, but some of your Firefox Plugins are out of date

  • Update all of your Firefox Plugins-> https://www.mozilla.org/en-US/plugincheck/
  • During the installation of the Plugins download files hotfix, remove the check mark to download any other software options with your Plugins (for example, toolbars, McAfee, Google Chrome, etc.)

• computer blocked the installation of updates for Vista Edition home premium

  I restart my computer (11 December 2009), and before it did, he said it was installing updates. He has been blocked for at least 12 hours of update 2 of 9. Is this normal? Is it possible to stop him with damage them the computer? I use Windows Vista Edition home premium and my computer is a Toshiba M305-S4019. I have just purchsed my computer in April 2009.

  Thanks in advance for your help.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Work from home remote access denied because the application is blocked by security settings - never happened before

  (Please excuse my ignorance - I'm not the person more in computer science)

  I worked for a few years with a secure address and open a session using a generated continually home access code.

  Very recently, I tried to log on and a box will appear indicating that the application is blocked by my security settings.

  I tried to reinstall Java to version more up-to-date. It has no effect.

  Any ideas how I can fix this problem?

  Thank you very much

  [moved from Virus & Malware]

  NOTE: http://www.Microsoft.com/en-us/Windows/enterprise/endofsupport.aspx

  I'm guessing here but it could be a problem because you are still using XP which is no longer supported by Ms.  Some entities are beginning to restrict access to their databases by computers using XP.

  I suggest that you speak with the COMPUTER consultants to the organization where you work.   Maybe you need a different code or COMPUTER consultants can tell you how to change your settings.

  Good luck...

• XP PRO XP Home keeps blocking printing

  I have a small network of 5 computers at school.  All computers have XP Home Edition (SP2) installed except 1 which has XP Pro.  Our printer is connected to the XP Pro (parallel port) station and I have enabled file and printer sharing.  I disabled the Windows Firewall, because the network has no external access because the network isn't only the Installer files and printers do share - no internet access.  When I install the network printer on the other 4 workstations, it requires a username and password for the XP Pro workstation.  I have all good enter, tell him to remember the password and everything seems to work properly.  The problem is that if I stop/restart XP Home positions, I can no longer connect to the printer attached to the XP Pro machine.  A way to remove the password of security on the printer and sharing just like XP Home installation?  Thank you.

  Hello

  You are missing some verification from somewhere.

  This link should remind you of the points which had to be verified.

  ---------------

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357

  Jack-MVP Windows Networking. WWW.EZLAN.NET