H50-55 - is my motherboard SATA 2 or 3

Similar Questions

• Installation DVD HP 1040i on the motherboard SATA system

  Trying to install a HP 1040i drive of DVD (IDE) in a new desktop PC of HPE 250F as second optical drive.

  I bought a converter card that fits 1040i data (converts SATA drive

  SATA to IDE to disk).  Rosewill (New Egg) IDE to SATA host is the name of the product.

  Power supply for mini card connected to the drive of DVD from PC.  Data for the second SATA data on the motherboard connector.

  Another MB SATA data cable goes to original BD/DVD from the optical drive.

  New disk causes Win 7 Pro install driver indicating "HP psc 2210xi USB Device" under disk drives

  OEM BD/DVD drive appears as DVD/CD-R) OM category.

  Second DVD player does not meet all the commands as Eject or play.  She has no power.

  Any suggestions?

  MrBobs wrote:

  Thanks for the reply.

  I think the card is defective.  Based on many forums of users and sites to return product I went with a new SATA DVD burner (Samsung).  a perfectly worked in my Win 7 system.  It was cheap and I should have started with a new drive instead of try to reuse an old DVD burner.

  Also, the site you recommended is a pay-for the site and a subscription is required for download.

  I'm sorry. Never used it myself, but the driver was there.

• SSD Raid 1 on the PowerEdge 100 motherboard Sata ports

  Hello

  I have a PowerEdge T100 with a Raid 1 SAS. I want to upgrade the server with 2 SSD connected to the Sata ports directly on the motherboard. They would Raid 1.

  Do you know if this is possible with the T100 PE?

  Hello

  I can't say with certainty. It is theoretically possible, but here are some things to consider:

  1. I show that we validated a SSD for the T100
  2. I do not show that the T100 is supported by the AHCI. Better SSDS feature with AHCI
  3. Although the ICH9R chipset is capable of RAID I do not show that it is a feature of the version installed in the T100 system map. You will need to run the RAID software within the operating system if you want a RAID array.

  Another thing to note is that the SATA ports are locked when a RAID SAS controller is present. Some of the ports are unavailable if this controller is present in the system.

  Thank you

• Workstation HP xw6200 motherboard: connecting HDD SATA 2 hp 08B8h

  Hello

  I want to connect a second hard drive to my XW6200.  On Tuesday, wb2001 kindly gave me the login procedure:

  "The manual shows that you can have 2 Sata Serial ATA drives. See the manual.
  Refer to article 69 pg 19 and 20 for the Sata data headers. Refer to pg 100
  for the hard drive Bay.
  The PSU has 2 Sata power cables, so all you need is a Sata data cable.
  Just imitate existing lead. »

  Unfortunately, when I tried to put it into practice, I discovered that Item # 19 of the SATA was used by my CD/DVD drive (it could be question No. 20, I'm not sure). I would like to know what are the options that I have now.

   

  Thank you very much for your help.
  

   

  Boyar
  

   

  
  

   

  
  

  All we hear is an opinion, not a fact.
  All we see is a point of view, not the truth.
  [Marcus Aurelius]

  Hello

  I see that your motherboard has a PCIe slot - x 8 on this subject. Is currently available? If so, you could purchase a controller card SATA PCIe - x 8 and that connect your extra hard drive.

  If you don't have an available PCI slot I recommend connect the DVD player to the PCI SATA controller card (you need to buy) and plug your HARD drive into the motherboard SATA slot currently used by DVD.

  Another alternative is to buy an external SATA USB2.0 Converter and use your HARD drive as an external drive instead.

  Thank you
  M

• No satellite P770-111 no SATA cable to connect the 2nd HARD drive

  Hello!

  I bought by Satellite P770-111 3 days and was hoping to insert another HARD drive that I had in my old laptop.
  OK, I opened the plastic cover on the bottom side of the laptop and there are 2 slots of HDD (2.5 ") but a single HARD disk.
  A HARD disk that is currenty in the laptop's big 500 GB. I would like to install another, but there is a problem:
  There is no cable to connect it to the motherboard SATA.

  Basically, there are 2 slots hard drive but only a connection interface. Could you please tell me how could I install a 2nd HARD drive?

  Thank you in advance!

  Damjan

  > there is no cable to connect it to the motherboard SATA.
  The fact is that not all laptops of the same series of notebook models are equipped with the same motherboard and controllers of same.
  This means that even if there is a second HARD-drive Bay, you will not be able to use a 2nd HARD drive. You know

  The chassis is the same in all models of laptops but there are different motherboards and not all supported 2nd controller.

• Pavilion a1700n: expansion of SATA for Pavilion a1700n

  How can I add a SATA drive to my desktop? I opened the computer and tried to juggle the SATA drive in the Bay, but do not have enough access to fix the 4 small screws. I tried to open a SIDE PANEL for GREEN, who seemed to be locking drive Bay. After reading the Pg 17 of the guide, I will try to identify the open with a screwdriver. Next problem: I found a SATA connector spare but a single POWER cable which is already set on the HARD disk. Is there an another power cable? I'll keep looking, but it must also attach to the motherboard - where?   There is of course the strap connectors master slave, but these do not have SATA connectors. When I get the above with your help, is there any necessary reconfiguration or MS 7 automatically detects the new SATA? Can I use this 256 GB SATA as an extension of memory because I'm already maxed out at 6 GB?  Or am I recorded to use as a shadow to the top?

  Your help would be greatly appreciated. Thanks in advance.

  First of all - the motherboard SATA profits are found down in the lower image irght on THIS PAGE.

  second - the power connector can be a bit harder to find.  If there is no other power SATA cables, then maybe an adapter will help you.  If there is a spare Molex power connector, you will need an adapter SIMILAR TO THE.  If not, then maybe A SPLITTER would be an option.

  Third - SATA drives should not normally the master/slave settings.

  As long as the ordinary reader works, then the added disc must be considered as additional storage space.  Assuming that MS 7 means that Windows 7, then it should recognize the drive.  It may take formatted to be usable.

• need to replace the SATA cable, cannot find the right

  Hello

  My HARD drive to my motherboard sata cable is broken and I need to replace it and I can't find the right cable, I hope you guys could help me and give me the correct link, I would like to buy an alternative and not of HP parts store

  I have a hp pavilion 2255sb g7

  Thanks for the help!

  Jonathan

  Here is the part number you are looking for:

  Not illustrated material hard drive Kit (includes hard drive support and support)

• HP Pavilion Desktop PC 550-126: SATA 3

  I'm about to buy a HP Pavilion 550-126 Desktop PC with a motherboard of Pegatron Odense. Is this motherboard SATA 3? It will allow a 1 GB Samsung SSD 850evo upgade?

  Hello

  Yes, H110 Intel Chipset on the card mother Odense supports SATA III (6 Gb/s)

  http://Ark.Intel.com/products/90590/Intel-GL82H110-PCH

  http://support.HP.com/ca-en/document/c04790427

  Description of the motherboard

  • Manufacturer name: Pegatron

• Pavilion 500-366: sata to esata support connection

  On the motherboard sata port works fine with a sata drive (i.e. 3.5 "HD) connected, but does not work when I connect an esata bracket for use with an external hard drive. I tried two different sata ports.  I did not have this problem on other motherboards. Support connects to the motherboard via a regular sata cable port.  I'm sure it's a simple solution, but little aid is necessary and would be appreciated. Thank you.

  Keep the external hard drive powered and connected eSata cable. Restart the system.

  Suspect that Hot-Swap is not active.

• Want to 700-414: SATA cable to drive 2nd on Envy 700-414

  In seeking to add a second internal drive, there is no motherboard SATA cable.   It's disappointing.  Where can I get a cable?

  Hello

  NewEgg.com or most electronics stores like Best Buy should have SATA data cables.  A cable SATA III about 12 "long should suffice.  In addition, wiil you need 4 x HP Compaq blue screw 6-32 SFF Hard Drive isolation mounting Guide-450712-001.  Review the results of Google for 450712-001.

  These HP How-to - articles should be useful.

• To install the new eSATA / SATA to USB 2.0 hard drive in an external enclosure but the computer does not recognize the drive in disk management

  I have an old computer with installed Microsoft Windows XP SP2 and 3.  I bought a new hard drive and also a new external hard drive for her case.  I have correctly installed the hard drive inside the enclosure, and I think that I have installed correctly (in the motherboard SATA port) eSATA port, according to the manufacturer's instructions.  I plugged everything... first eSATA, then power and power switch.  I restarted the computer, and I chose to analyze disks in disk management.  However, the new drive is not recognized.  The SATA port on the motherboard could not work or did I buy the bad, perhaps, hard drive enclosure for my system?  Or something related to the software?  Thank you.

  Hi Donnadream,

  Connect the hard drive to another port and check if that makes a difference

  Step 1: You can follow the steps mentioned in the article below, which deals with a similar question

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 2: Download and install the latest drivers from the chipset of the computer or the manufacturer of the motherboard and check

  Step 3: Hard disk can be turned off in the BIOS; You may want to enable

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, it is a hardware problem, contact the manufacturer of the hard drive for a more specialized help

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What for new ssd sata port?

  I was wondering which of the 4 ports on the motherboard sata should I choose for my new ssd, there are 4 ports sata with different colors.

  System:

  HP Pavilion Elite H8-1140sc

  If you plan to use the SSD drive for a boot drive, then after cloning the C: drive current, use the port that your current boot drive is in. If you are Ingo to use it for storage, then place it in any empty port.

  Best regards
  ERICO

• Support SATA 3 (6 Gb/s) on a HPE - 570 t.

  I just buy a desktop HPE - 570 t and would add a 510 Intel SSD as boot drive.

  I understand the motherboard in my new PC is a Petagron (Cleveland) with an Intel H67 chipset and that this chipset supports up to two SATA 3 (6 Gb/s), and 4-port SATA 2 (3 Gb/s).

  Two quick questions:

  1 is one of the 4 SATA ports on my motherboard SATA 3? If so, which?

  2 Intel has a reminder of the high profile of his SB chipsets earlier this year - are the chipset on the free current mothers of previous problems?

  Thank you!

  Hello

  Read the specification again.  They indicate SATA 3 G (3 GB). This means that SATA II.

  The OCZ Vertex 3 seems to be top dog for SSD (excluding the SSD PCI - E).

• R720 can I connect drive sas/sata hard without controller card?

  I have a r720 without raid card.  When I plug a ssd or disc of 15 k / 10 k sas on the hotswap backplane, chassis recognizes the drive is connected (I get an orange light and lcd to alert that the disc is removed when I go out).  However, the bios and the operating system does not recognize any disks hotswap (they see only the optical drive connected to the ports on the motherboard sata.

  Do I need a controller card to use drives connected on the backplane, or is it possible to use backplane without controller card?  I didn't need raid functionality.

  Thanks in advance.

  -shane

  Hello Shane

  ntshane

  Do I need a controller card to use drives connected on the backplane, or is it possible to use backplane without controller card?  I didn't need raid functionality.

  Yes, you must have a controller connected to the bottom of basket. If you have purchased the system without a RAID controller should have a SAS cable that goes from the backplane to the slot of controller S110 chipset on the system board.

  You can use the S110 SATA controller on board for communication with backplane. Well, there are limits to the S110 controller, so may not suit your needs. You can probably buy LSI 9207 if you want readers to run in a non-RAID. The other options are a H710 PERC; which you can set the readers to the single drive RAID 0 s. In this State, they function as drives no RAID. You can also get a H310. The H310 supports the RAID mode, but we have added a few features to the H310 who do not find in previous versions of the card. In doing so, it reduced performance when operating in a mode non-RAID.

  The reason why I say that you'll probably want another controller than the S110 is because you mentioned that you have SAS disks. The S110 is a single SATA controller. In addition, the S110 is supported up to 4 discs.

  To access the BIOS RAID make sure the S110 is turned on in THE system BIOS. In the BIOS, go to SATA settings. In the menu choose the RAID mode. It will turn on the S110 controller. You can configure the drives in the BIOS S110 when booting with the CTL R. I do not know what operating system, you perform the installation, but the S110 is compatible with Windows.

  Thank you

• Idrac6 select boot from percRadi6 or internal sata single drive

  Hello

  I have a DELL T310 with idrac6

  a raid array with XenServer and a single sata disk with windows 10 is directly connected to motherboard sata port.

  I want to select the first boot device in the control panel of perc to start xen or windows 10, but I can't figure out how, I tried all the options start from the control panel web perc.

  I need somethings in the bios to perform this action?

  Thank you.

  There is not as many options as those you see on this screen.