H8-1447ez: problem with the recovery Image

Similar Questions

• USB keys - problem with the Recovery Manager

  I bought a 16GB Kingston DataTraveler 112 USB key so I could copy the recovery as a backup image. He acknowledged the USB key and showed that the recovery image has been slightly more than 11 GB. But when he started to format the USB key, it returns to the previous screen and asking more of the car. At the bottom of the screen, he said to contact the HP Support, but it gives me an error message. Now when I try the Recovery Manager it does not recognize the USB at all.

  Before that, I had bought another 16 GB USB - don't remember what brand. I have 5 other USB drives, but they are all small, except a 32 GB Kingston DT101 G2 which does not work on this computer, even if it worked on my old computer (Pavilion w/Vista Home Premium) without problem. All these USBs, including the new Kingston are for USB 2.0.

  Operating system is Windows 8.1 64-bit on the desktop HP Pavilion 500 - A60. I tried the problem that USB keys in all 4 ports (2.0 and 3.0). Also in that I plug into a port to give me 3 USB ports, also used on my previous computer.

  Is it possible that this computer does not recognize Kingston or some other brands of USB thumb drives?

  The trick to this is to use a USB 2.0 port and use a non-windows 8 certified thumbdrive. If the USB flash drive shows as a 'removable device' there should be no problem in the use of the media to create a recovery media

  I had a lot of success with a 16 GB Transcend USB 3.0 flash drive.

  I own a couple of DataTraveler flash drives and had the same lack of success, creation of recovery media that you did. I have had zero success with 3.0 of Sandisk Extreme usb flash drives

• Qosmio X 70-A - need help with the recovery image installation

  OK, so I recently bought a new laptop (Qosmio X 70 - A) which came with pre-installed Windows 8.1.
  First thing I did was to make a backup of the system, all good and beautiful image... installed a program for a better partition the HARD drive and the program dirty windows. It would not start (a blue screen appeared with the error 0 x 80070035).

  Searched the web for solutions and managed to repair using a recovery media, but the laptop was moving to slow down, the best thing that I thought was a restore with the system that I've done before image.

  I put the image on a blu - ray player and entered the recovery media, troubleshooting, advanced option, image system restore, choose the blu - ray and he went for one minute after this error appeared 0x8078002c and my HD is completely erased...

  Please help me
  Laptop did not come with any dvd/cd etc.
  I don't know the serial number of Windows (there is no sticker on the laptop with the sticker).

  Generally the recovery image installation should not be problematic.
  A few months ago I ve installed Win8 recovery image on friends laptop U940.
  If I m remembering well, I just choose recovery image installation (out-of-box) and the recovery image has been successfully installed.

  There was no some don't troubleshoot option.
  Start your laptop and press F12 to get into the boot menu. Put recovery media in the optical disc drive, choose the CD/DVD/BD drive in the menu and press ENTER.

  Just follow the on-screen menu and choose recovery image installation (State out-of-box).

• problems with the restore image on dreamweaver cs3

  I'm a GoLiver trying to learn Dreamweaver. I'm having a problem with the image of restoration on the bearing.  Here's the url

  http://www.allthegills.com/meadowcroftweb

  Not sure where I was wrong.

  Thanks for any help.

  The onmouse above and on the need to go in your href tag. You have them in your img tag. Should look like this

  

• Two problems with the recovery disk

  Hello

  It's my PC Toshiba laptop 3rd and for the first time I have this problem:
  I just struggle and it come with C:233 GB and D 233 GB * or some. I try to divide the disk HARD C, D and E, but when I try to use the recovery disk disk resize my HARD drive for the factory with C and D only setting
  Is it possible to use the recovery disk, but to choose the partition that I want to be to install the operating system?

  Second problem is:
  before * begin to do something with * my HARD drive I did the USB recovery using the toshiba software
  but * when I say in the menu for starting a startup USB form comes only a black screen with white line in top left corner and so still why this is happening
  It's the information Satenv.ini are there is something wrong

  [Commune]
  Packer = ImageX
  InstallCMD = \inst.cmd
  FactoryInstallCMD = \facinst.cmd
  PartitionSizeGB =-1
  MinPartitionSizeGB = 15
  DefaultGUILang = English
  NumLang = 1
  Hnum = R11460EN
  [Lang1]
  Lang = FRA
  OS = Windows Win 7
  ImageName = 10185XSP.swm
  ImageIndex = 2
  WinREIndex = 1
  FS = NTFS
  StartMedium = 1

  Hello

  In the past, you probably had old laptop models shipped without recovery disc option HARD and recovery facility old ghost. Now it works a little different.
  Here is my little explanation:

  Question n ° 1
  > Is it possible to use the recovery disk, but to choose the partition that I want to be to install the operating system?
  N ° before installation of HARD drive recovery image will be erased completely and create new partitions (factory State).

  2nd edition
  It will not work. Installation of recovery work as installation DVD or HARD drive recovery procedure.

• Pavilion g6-2306el: problems with the recovery DVD-R discs

  Hello, it's only now that I saw that the DVD + R is suggested for all recovery discs burning. A little too late for me, since I bought several DVD-R to produce my game. Here is what happened: each disk has been created with difficulty; the burning process failed on all the others try. But in the end, I finally got the DVD-R 4 program have been burned and verified correctly. Now, when I tried to insert each disk to make sure that the laptop was able to read properly (the content supposed to be confirmed, after all), to my horror, I realized the first two discs were not being recognized. However, my patience was rewarded when, after a long time, suddenly, an Explorer window showing the contents of the disc. Taking advantage of the situation, I immediately copied this content in a folder on the desktop. It took me a long time to do this process for the content of the first two discs that had recognized problems. Subsequently I also copied the contents of the discs 3 and 4, which was much faster. Now, I have four folders with the corresponding content of the recovery disks in the office. The question is: can I use these content and burn on DVD + R this time, in order to have a working set of recovery disks? Thank you very much.

  Hi @anthony_s

  Thank you for your query.

  I understand that you have created your recovery on the wrong type of DVD disc and does not work.  You have copied the contents of folders on the desktop you and want to know if you can now create new recovery DVD on the appropriate type of files.

  No, it will not work.  I suggest that you contact HP support and inform about events and inquire about obtaining a recovery kit.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I found this link on the HP forum, that you can read, I don't know if it works or not. Please let me know if it is successful.

  This is how to do a 2nd set of recovery disks.

  Good luck!

• Problems with the updated images licensed library

  Images of Adobe are not updated in the library when a license always naked and the watermarks, unless it is downloaded to the desktop. When will this problem be resolved?

  It's slow the flow of work and extremely frustrating when the seamless integration was an important reason regarding, reason why we bought this package.

  Everyone knows about this problem?

  Go to Adobe Stock

  Hello

  Please see Stock troubleshooting: FAQ: how to solve problems with images of Stock?

  Hope that helps!

  Kind regards

  Sheena

• Big problem with the D810 images

  I have a big problem with lightroom. He presents objects in images to avoid. An example is the following:

  

  The same image converted with Nikon ViewNX 2, does to 16 bit TIF and reimported into Lightroom is much better:

  

  Is there something I can do? Is there a problem with my settings? Is this a known on the side of lightroom problem? Will there be improvements corrections? This may be due to active d-lightning without knowing about this in lightroom?

  Thanks for any help and suggestions!

  There is a problem of Posterization with the camera matching profiles having Lightroom for the D810. This could well be her. As I know there is no update for those yet. Try a different camera such as Adobe Standard profile. If this resolves the Posterization that this question and you will have to wait for the next update of Lightroom to get updated profiles to update (I hope).

  > This can be caused by active d-lightning without knowing about this in lightroom?

  No, but it is advisable not to use all modes like this in camera when you use Lightroom or any other software gross non-Nikon because all that camera RAW isn't to underexpose it and save a statement to apply treatment HDR with Nikon raw software. Other software will not be able to read as the statement and it will make images appear underexposed because they are in reality.

• Problem with the uploaded images.

  Having a problem with images is uploaded to the site. On a page, I have a tag div set to a certain size, but if someone downloads an image that is larger that the size of the div ignores the div size The size of the div is 500px 500px. I even tried a table with a size of game and still no go. I thought to use the cfimage resize function, but go thinking thought that if someone downloads an image that is not more then500px X 500px it will prolong the size I put and can blur the image, so I guess that's a no.

  Is there a way to force the image to do not extend beyond the size, I put in the div?

  OK, let's say the user downloads the image to/home/user/www/uploads, and file name is avatar.jpg

  You can do this:

  <>

  action = "resize".

  width = "500".

  height =""

  source = "" #uploadfile # ""

  destination="/home/user/www/avatars/avatar.jpg".

  Overwrite = "true" >

  <>

  action = "move."

  source = "" #uploadfile # ""

  destination="/home/user/www/avatars/avatar.jpg" >

  If the avatar is on 500px wide, it resizes and puts it in the folder avatars (or wherever you want to go).  If this isn't the case, it just moves.  The 'userimage' in userimage.width is just the name = "" of the first tag . "  It can be anything you want, as long as it fits the name.

• Problem with the import image

  I'm having a problem with an image that is deformed when fired in Captivate.
  
  Here's the original image in PowerPoint:
  [IMG] http://img511.imageshack.us/img511/5215/originalinpowerpoint.jpg [line]
  
  Here are what Captivate 3 pulls inside:
  [IMG] http://img255.imageshack.us/img255/8338/problemincaptivate.jpg [line]
  
  Notice the right side of the red zone? As you can see, even if it is the only slide, without text, it always distorts. I tried as an animation and a background image, each time the same mistake.
  
  Any direction as to what I can hurt? Unfortunately, my company does not allow my update to Captivate 4, so I'm stuck here where I am at the moment be.
  
  I have appreaciate the assistance.

  Hi there Hexfyre

  I can't explain why it happens. But if it's a one, you could work around it by simply screen capture the image in PowerPoint and it burst in Captivate. Which should make an exact copy of what you see in PowerPoint.

  See you soon... Rick

• HP 620 Notebook PC: Problem with the recovery disk

  Hungry, I got the recovery disc for this laptop. After that reinstall operating system, again once there is no recovery partition and cannot install Recovery Manager. Is a way to make a partition recovery manually, or with other solutions?

  Thanks in advance

  lulemaster0 wrote:
  Two disks
  With os
  The one with the applications and drivers.

  Did you follow this restore configuration...

  HP computers - performing a recovery of system HP (Windows 7)

• Problem with the documents/images being too large

  I can scan using the HP Officejet J3680, but the images are too large to email. I tried scanning the documents in TIFF files, PDF files, JPEG files, and they all do the same thing. I recently bought a computer from Gateway with Windows 7 already installed. My last computer has XP and worked very well with the same material. I updated the drivers and downloaded the HP Solutions Center, and nothing seems to help. I have cause to scan and send documents frequently and it is very frustrating.

  Looking for a parameter in the scanning software can specify a lower resolution.  Boulder computer Maven
  Most Microsoft Valuable Professional

• I have a problem with the recovery of the saved games.

  I like playing Solitaire on Windows 7 games.  I saved games with settings; cumulative totals, always open the saved games and enjoy a setting up a pretty good score.  Recently, I save the game before closing the it and instead of opening of saved game, a cool game starts with a balance no (-$52.) in the score.

  I remember a time looking for parts saved and by opening from somewhere else.  I can't find any saved games.  How can I locate and open them to continue?

  They are not saved in Onedrive or icloud I have to accommodate the Mac with the PC and the phone.

  Thank you

  Hi John,.

  Please check if the first answer by Syed N in the addresses of next the same situation as you thread cross with Solitaire:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/saving-Windows7-solitaire-games/ae9112ef-061C-47eb-8a66-49600aadc032

  Please keep us informed. Thank you and have a nice day.

• Problem with the BLOB image recovery

  We are on Coldfusion 9,0,1,274733. I checked on "Enable recovery of binary large object (BLOB)" on the database, but the picture is always cut (3/4 in part gray). On our dev server, it works perfectly, our production server gives just partly gray images. I checked the settings of CF database between dev and production, and they are exactly the same. We rebooted the server, but still the same problem. It's like Coldfusion does not see tuning changes. Does anyone else have this problem?

  We have found the solution. Our production servers are in a clustered environment. You must enable "Enable recovery of the binary large object (BLOB)" at the level of the instance cluster. You will need to make this change on all instances in the cluster. I was only to 'local' level on each server in the cluster (which didn't work).

  In CF Admin:

  Enterprise Manager > Instance Manager > select the instance and select BLOB

• Strange problem with the preview image paused in the two Source/program monitor

  

  I have updated to OS X El Capitan (impossible to uninstall El Capitan currently) and now whenever I'm on break on any image in first Pro CC 2015 (Source/program time) I get this strangeness of ideas? Once I hit the game everything is good and normal, once again but the second I stop playing, that it is this strangeness.

  Rendering the chronology did not jack and I deleted all my preferences / uninstalled and reinstalled the program also. Help please, I have two projects I need to finish but I can't do all the color currently fixes.

  See you soon,.

  Heads up on first with El Capitan