Pavilion g6-2306el: problems with the recovery DVD-R discs

Similar Questions

• Problems with the software DVD-ROM discs

  My hard drive is not always save when I insert my Sims 3 disc. They are the software DVD-ROM discs. Recently, I was able to install a new but have not been able to get my computer to record the disc since then. How can I solve this problem?

  Hello

  1 are. what software you referring?

  2. what operating system is installed on the computer?

  3. you remember make changes to your computer before this problem?

  Try the steps in the following article: your CD or DVD cannot read or write media http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

• Problem with system recovery dvd

  I ordered the dvd from hp for my compaq presario notebook and when I got in I put disc 2, it won't return to the vista system recovery. and now my laptop does not start.

  I ordered the dvd from hp for my compaq presario notebook and when I got in I put disc 2, it won't return to the vista system recovery. and now my laptop does not start.

  Hey mjthomas1981

  you encounter a problem with the hp recovery discs, you should contact hp on their products

  Walter, the time zone traveller

• HP pavilion n242se 15: problem with the BIOS software

  Hello
  I have HP pavilion 15-n242se and I have the problem with the software of the BIOS, because when I restart the computer it turns off completely and go back a few seconds later.
  Please, I want to again software for BIOS for Windows 10 64 bit
  
  Can you help me?

  SyrianCow

  Sorry for the bad news, but HP does not update the BIOS of your PC for Windows-10.

  They planned them to Win8.1, and you should have to do the upgrades at the time, BEFORE you upgraded to Win10.

  The HP BIOS upgrades are OS-specific version, so now that you have upgraded, you can no longer run these.

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• HP Support Assistant unable to fix a problem with the CD/DVD not detected

  I have a G42-415DX laptop and I can not read cd/DVD, it was working fine 3 weeks ago and now nothing / I tried the support assistant and he could not solve the problem.  I got a message saying the driver must be reinstalled, how do I reinstall the driver?

  Hello

  If you do not get the chance to use another PC, I would definitely create the CD and the DVD bootable as it would give a clear indication if there is a hardware problem with the optical drive.

  In the meantime, try following the procedure in the title of the subheading "Let me fix it myself" on the link below to remove upper and lower filters (if these registry keys exist) and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  If find you the following registry keys and delete them, restart the laptop before checking the disc.

  Kind regards
   
  DP - K

• Pavilion 15-e070sl: problem with the key "cancelled."

  Hi guys,.

  I have some problems with the key "cancelled." It does not work for a few months. But the more serious problem is that sometimes when I double click on a file or a folder with my mouse compares the window cancellation asking me to confirm moving the file to the trash. This window disappears until I have restart the system. He thus annoyng. It seems that the key 'cancelled' suddenly to work again when I double click on something.

  I hope you find a solution

  With the availability!

  Hi @MichaelMazz ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-e070sl and the keys does not properly.  Select an on-screen keyboard layout using this document , as this could be the problem.

  If this is not enough, try this document on troubleshooting the keyboard. You can watch the laptop marked key stuck section.

  Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

  Have you tried to clean the key or use air to blow the key there could be debris in the key itself?

  I hope this helps.

  Thank you.

• HP Pavilion dv7t 3300: replacing hard drive SSD with the recovery DVD

  My Pavilion dv7t3300 has two hard drives... A SATA 500 GB of data and an SSD 128 GB containing the operating system and other programs.   The SSD drive that contains the operating system failed.  When I install the replacement SSD, I intend to use the HP System recovery DVD (2) which came with the unit.  If I load the recovery disks will be erase/format all my data-files in the 500 GB drive.

  The new drive is "naked".

  Thank you for your help

  Tim

  I just remove the second disk while making the recovery operation and slap it in when the process is complete. Better safe than sorry. Theoretically, the recovery disks will not affect the second drive, but it's really easy to be sure that they will not be 100%.

• Equium A200 - problems with the CD/DVD-RW and Realtek HD driver

  I'm having some trouble with my Equium A200-1VO.

  First of all, I can't get the CD/DVD-RW to write any dics. The Player opens also from time to time.

  Secondl, I just downloaded and installed the latest driver Realtek HD audio, under the guidance of Toshiba, to see that when I plug my headphones the sound always comes out of my laptop speakers.

  Any help or thoughts?

  Thank you

  Now, he can be really problematic. If you use your own installation of the OS, no one can say with certainty what can be the problem. Each laptop manufacturer, including Toshiba, offer recovery image installation and in using the factory settings, everything should work well. These recovery images are tested and they offer all the hardware and software features.

  Maybe you should install Vista using recovery media supplied and check if all these problems are happening again. If yes then we can talk about the unusual and serious issues.

• USB keys - problem with the Recovery Manager

  I bought a 16GB Kingston DataTraveler 112 USB key so I could copy the recovery as a backup image. He acknowledged the USB key and showed that the recovery image has been slightly more than 11 GB. But when he started to format the USB key, it returns to the previous screen and asking more of the car. At the bottom of the screen, he said to contact the HP Support, but it gives me an error message. Now when I try the Recovery Manager it does not recognize the USB at all.

  Before that, I had bought another 16 GB USB - don't remember what brand. I have 5 other USB drives, but they are all small, except a 32 GB Kingston DT101 G2 which does not work on this computer, even if it worked on my old computer (Pavilion w/Vista Home Premium) without problem. All these USBs, including the new Kingston are for USB 2.0.

  Operating system is Windows 8.1 64-bit on the desktop HP Pavilion 500 - A60. I tried the problem that USB keys in all 4 ports (2.0 and 3.0). Also in that I plug into a port to give me 3 USB ports, also used on my previous computer.

  Is it possible that this computer does not recognize Kingston or some other brands of USB thumb drives?

  The trick to this is to use a USB 2.0 port and use a non-windows 8 certified thumbdrive. If the USB flash drive shows as a 'removable device' there should be no problem in the use of the media to create a recovery media

  I had a lot of success with a 16 GB Transcend USB 3.0 flash drive.

  I own a couple of DataTraveler flash drives and had the same lack of success, creation of recovery media that you did. I have had zero success with 3.0 of Sandisk Extreme usb flash drives

• Two problems with the recovery disk

  Hello

  It's my PC Toshiba laptop 3rd and for the first time I have this problem:
  I just struggle and it come with C:233 GB and D 233 GB * or some. I try to divide the disk HARD C, D and E, but when I try to use the recovery disk disk resize my HARD drive for the factory with C and D only setting
  Is it possible to use the recovery disk, but to choose the partition that I want to be to install the operating system?

  Second problem is:
  before * begin to do something with * my HARD drive I did the USB recovery using the toshiba software
  but * when I say in the menu for starting a startup USB form comes only a black screen with white line in top left corner and so still why this is happening
  It's the information Satenv.ini are there is something wrong

  [Commune]
  Packer = ImageX
  InstallCMD = \inst.cmd
  FactoryInstallCMD = \facinst.cmd
  PartitionSizeGB =-1
  MinPartitionSizeGB = 15
  DefaultGUILang = English
  NumLang = 1
  Hnum = R11460EN
  [Lang1]
  Lang = FRA
  OS = Windows Win 7
  ImageName = 10185XSP.swm
  ImageIndex = 2
  WinREIndex = 1
  FS = NTFS
  StartMedium = 1

  Hello

  In the past, you probably had old laptop models shipped without recovery disc option HARD and recovery facility old ghost. Now it works a little different.
  Here is my little explanation:

  Question n ° 1
  > Is it possible to use the recovery disk, but to choose the partition that I want to be to install the operating system?
  N ° before installation of HARD drive recovery image will be erased completely and create new partitions (factory State).

  2nd edition
  It will not work. Installation of recovery work as installation DVD or HARD drive recovery procedure.

• H8-1447ez: problem with the recovery Image

  I have HP's ENVY h8 PC bought two years ago. Last week, I tried to update my OS to Win10 - in any case - I made the backup of the downloaded and installed on USB recovery Image Win10. Don't like it, then

  because win 10 deleted the entry of the new filming, I use my USB key to back to Win 8. After some problems, I successfully restored my old BONES, but it does not recognize the partition of

  the recovery Image - neither the original nor the USB.
  I mean, if I go to settings-> change the PC-> General settings-> delete everything and reinstal windows-> start-> Reset your PC-> next it says: cannot find the files needed

  Is it possible to fix this?

  Ladies and gentlemen: PROBLEM SOLVED...

  I have successfully restored my PC in its original configuration - if you want, I can write how separate article make (fix Recovery Manager and problem with Recovery Manager not seeing original missing recovery Image).

  @veilendank10: thanks for trying to help, but my problem is of a very different nature.

• problem with the CD/DVD ROM device

  Windows nofified it is problem with my CD ROM havin - two of them! I tried Windows troubleshooting. He tried to reinstall the driver but it failed.
  Then I tried Windows Update to see if I can find an update of the driver but he could not find any update related to my CD ROM
  Now I don't know wt to do at all!

  Hi khadija.

  1. you receive messages or error codes?

  You can read the following article and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope this information is useful.

• I have a problem with the CD/DVD-rom does not.

  Original title: CD-ROM/DVD-ROM and drivers

  Hello

  My DVD Samsung writer stopped working.  The model (SH-222) is a plug-and-play using CD-ROM/DVD-ROM drivers of the window.
  -cdrom.sys version 6.1.7600.16385 (win7 - rtm.090713 - 1255) in the folder: Windows\system32\DRIVERS\ and.
  -GEARAspiWDM.sys version 2.02.03.00 in the folder: Windows\system32\drivers\.

  I get the following error in the configuration of properties of CD-Rom drive: "Windows cannot start this hardware device because its configuration (in the registry) information is incomplete or damage (Code 19).»  I tried the windows troubleshooting hardware request without success.  I even swapped the the DVD burner with a new model of Samsung (SH-224) with the same results.

  I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

  What are my options?

  Mario

  I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

  http://support.Microsoft.com/kb/982116/en-us

  Your registry may be damaged. (Code 19)

  This problem occurred after cleaned your registry using "CCleaner database"? If so, then when running CCLeaner you would have the option to backup the registry keys. If you did, perhaps restore the backup keys. If not, read the article above (do not rely on the fixit).

• Pavilion 14-v202tx: problem with the driver

  Hello

  I got a Win7 64 bit and I have a problem with a driver: network controller pci device and BCM43142AO

  My laptop HP Pavilion 14-v202tx

  Please help me

  Hello

  Broadcom Wifi

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66445.exe

  Broadcom Bluetooth software

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66402.exe

  PCI device

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Kind regards.