problems with the restore image on dreamweaver cs3

Similar Questions

• H8-1447ez: problem with the recovery Image

  I have HP's ENVY h8 PC bought two years ago. Last week, I tried to update my OS to Win10 - in any case - I made the backup of the downloaded and installed on USB recovery Image Win10. Don't like it, then

  because win 10 deleted the entry of the new filming, I use my USB key to back to Win 8. After some problems, I successfully restored my old BONES, but it does not recognize the partition of

  the recovery Image - neither the original nor the USB.
  I mean, if I go to settings-> change the PC-> General settings-> delete everything and reinstal windows-> start-> Reset your PC-> next it says: cannot find the files needed

  Is it possible to fix this?

  Ladies and gentlemen: PROBLEM SOLVED...

  I have successfully restored my PC in its original configuration - if you want, I can write how separate article make (fix Recovery Manager and problem with Recovery Manager not seeing original missing recovery Image).

  @veilendank10: thanks for trying to help, but my problem is of a very different nature.

• Problem with the design view in Dreamweaver CS5

  Hi all

  I'm having a problem with my creation mode on a page I created in Dreamweaver CS5.

  The files can be found here as well as a jpeg file showing the issue I'm having.

  http://www.siltd.co.UK/PRB/

  Everything was fine until I added the three classes:

  {.crproductsrightpanelheading}

  Width: 186px;

  top of the margin: 25px;

  background-image: url (.. / images/crproductsrightpanelheadingbg.jpg);

  background-repeat: no-repeat;

  background-position: left;

  padding-left: 28px;

  do-family: Arial, Helvetica, without serif.

  color: #FFF;

  do-size: 14px;

  line-height: 27px;

  float: left;

  Clear: right;

  }

  {.crproductsrightpanellist}

  Width: 199px;

  top of the margin: 5px;

  padding-left: 5px;

  float: left;

  overflow: auto;

  }

  .crproductsrightpanellist li {}

  do-family: Arial, Helvetica, without serif.

  color: #FFF;

  do-size: 12px;

  list-style-image: url (.. / images/crdash.jpg);

  line-height: 18px;

  list-style-position: inside;

  }

  Now, I can hardly see what is happening.

  It's good in Live View mode and also when published, but design view is like having a steering wheel towards the bottom of my pants... It's driving me crazy!

  What it looks like when published can be seen here:

  http://www.siltd.co.UK/new%20SI%20Site/crproducts.html

  Any help telling me where I went so wrong would be appreciated.

  Thanks in advance.

  Andy

  Run your pages through this validator and clean up any errors...

  http://validator.w3.org/

  For now, you have a large number of errors that need to be addressed, about 90 altogether.

  While some browsers allow to better interpereting what you wanted to do than others (IE being the absolute worst), DW is a maniac, especially in Design view. It is still displayed incorrectly in DW after you fix all the problems, after return and we can take a closer look.

• Problems with the updated images licensed library

  Images of Adobe are not updated in the library when a license always naked and the watermarks, unless it is downloaded to the desktop. When will this problem be resolved?

  It's slow the flow of work and extremely frustrating when the seamless integration was an important reason regarding, reason why we bought this package.

  Everyone knows about this problem?

  Go to Adobe Stock

  Hello

  Please see Stock troubleshooting: FAQ: how to solve problems with images of Stock?

  Hope that helps!

  Kind regards

  Sheena

• Problem with the restoration of the database

  Hello world

  I have a strange problem while restoring the database with rman. The problem is that the data are not restored at all.

  Let me show you what I do step by step:

  1. create the test table:

  $ sqlplus / as sysdba

  SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 22:51:58 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > create table test (ID);

  Table created.

  SQL > insert into values test (1);

  1 line of creation.

  SQL > commit;

  Validation complete.

  2. backup the current database:

  rman target $ /.

  Recovery Manager: release 11.2.0.1.0 - Production Fri Apr 17 22:56:44 2014

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: ORACLE (DBID = 1672007929)

  RMAN > backup database;

  From 17 April 14 backup
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 6 type of device = DISK
  channel ORA_DISK_1: starting full datafile from backup set
  channel ORA_DISK_1: specifying datafile (s) in the backup set
  Enter a number of file datafile = 00001 name=/u01/app/oracle/oradata/oracle/system01.dbf
  Enter a number of file datafile = name=/u01/app/oracle/oradata/oracle/sysaux01.dbf 00002
  Enter a number of file datafile = name=/u01/app/oracle/oradata/oracle/undotbs01.dbf 00003
  Enter a number of file datafile = 00005 name=/u01/app/oracle/oradata/oracle/example01.dbf
  Enter a number of file datafile = name=/u01/app/oracle/oradata/oracle/users01.dbf 00004
  channel ORA_DISK_1: from room 1 to 17 April 14
  channel ORA_DISK_1: finished piece 1 to 17 April 14
  piece handle=/u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_nnndf_TAG20140417T230734_9o1j980f_.bkp tag = TAG20140417T230734 comment = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:57
  channel ORA_DISK_1: starting full datafile from backup set
  channel ORA_DISK_1: specifying datafile (s) in the backup set
  including the current control in the backup set file
  including current SPFILE in the backup set
  channel ORA_DISK_1: from room 1 to 17 April 14
  channel ORA_DISK_1: finished piece 1 to 17 April 14
  piece handle=/u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_ncsnf_TAG20140417T230734_9o1jc09s_.bkp tag = TAG20140417T230734 comment = NONE
  channel ORA_DISK_1: complete set of backups, time: 00:00:01
  Backup finished on 17 April 14

  3. change the data in the test table

  $ sqlplus / as sysdba

  SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 23:10:16 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select * from test;

  ID
  ----------
  1

  SQL > update test set ID = 2;

  1 line update.

  SQL > commit;

  Validation complete.

  4. restore the database

  RMAN target /.

  Recovery Manager: release 11.2.0.1.0 - Production Fri Apr 17 23:11:15 2014

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  connected to target database: ORACLE (DBID = 1672007929)

  RMAN > shutdown immediate;

  using the control file of the target instead of recovery catalog database

  database closed

  dismounted database

  Instance Oracle to close

  RMAN > bootable media.

  connected to the database target (not started)

  Oracle instance started

  mounted database

  Total System Global Area 835104768 bytes

  Bytes of size 2217952 fixed

  629147680 variable size bytes

  197132288 of database buffers bytes

  Redo buffers 6606848 bytes

  RMAN > restore database;

  From restoration to April 17, 14

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 156 type device = DISK

  channel ORA_DISK_1: from the restore backup set data file

  channel ORA_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_DISK_1: restore datafile 00001 to /u01/app/oracle/oradata/oracle/system01.dbf

  channel ORA_DISK_1: restore datafile 00002 to /u01/app/oracle/oradata/oracle/sysaux01.dbf

  channel ORA_DISK_1: restore datafile 00003 to /u01/app/oracle/oradata/oracle/undotbs01.dbf

  channel ORA_DISK_1: restore datafile 00004 in /u01/app/oracle/oradata/oracle/users01.dbf

  channel ORA_DISK_1: restore datafile 00005 to /u01/app/oracle/oradata/oracle/example01.dbf

  channel ORA_DISK_1: backup /u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_nnndf_TAG20140417T230734_9o1j980f_.bkp piece reading

  channel ORA_DISK_1: room handle=/u01/app/oracle/flash_recovery_area/ORACLE/backupset/2014_04_17/o1_mf_nnndf_TAG20140417T230734_9o1j980f_.bkp tag = TAG20140417T230734

  channel ORA_DISK_1: restored the backup part 1

  channel ORA_DISK_1: restore complete, duration: 00:00:55

  Restoration finished in 17 April 14

  RMAN > restore database;

  To go back to April 17, 14

  using channel ORA_DISK_1

  starting media recovery

  media recovery complete, duration: 00:00:03

  Finished recover at April 17, 14

  RMAN > sql 'alter database open;

  SQL statement: alter database open

  5. check if the data has been restored

  sqlplus / as sysdba

  SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 23:14:39 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  
  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select * from test;

  ID
  ----------
  2

  Summary:

  Data has not changed. Provided the ID is 1, but after the success of data recovery is not restored (ID is always 2).

  Can someone help me? What I am doing wrong?

  Database is Oracle 11 g with archivelog active

  Ol6 2.6.39 Linux OS - 300.17.2.el6uek.x86_64

  RMAN > restore database;

  To go back to April 17, 14

  using channel ORA_DISK_1

  starting media recovery

  media recovery complete, duration: 00:00:03

  Finished recover at April 17, 14

  RMAN > sql 'alter database open;

  SQL statement: alter database open

  5. check if the data has been restored

  sqlplus / as sysdba

  SQL * more: Production of release 11.2.0.1.0 Thu Apr 17 23:14:39 2014

  Copyright (c) 1982, 2009, Oracle.  All rights reserved.

  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options

  SQL > select * from test;

  ID
  ----------
  2

  Summary:

  Data has not changed. Provided the ID is 1, but after the success of data recovery is not restored (ID is always 2).

  Can someone help me? What I am doing wrong?

  Database is Oracle 11 g with archivelog active

  the recovery was successful, but achieved your goal.

  There are several options to reach your goal to recover your database to a particular State that is point in time.

  1 restore the file of control as noted above. you restore the control file must not be aware of the generated once archivelog that you update your table. IE backup controlfile prior you updatedyour table.

  2. do not apply archivelog all during recovery. You can use SNA, SEQUENCE, RESTORE POINT option of the recover command. This option requires that you open your database with resetlog.

  read: scene of Flashback and the database Point-in - time recovery

  After a restore successful your database (before the recover command), you can "alter database open read-only" to check and confirm the values in the table.

  HTH

  Tobi

• Big problem with the D810 images

  I have a big problem with lightroom. He presents objects in images to avoid. An example is the following:

  

  The same image converted with Nikon ViewNX 2, does to 16 bit TIF and reimported into Lightroom is much better:

  

  Is there something I can do? Is there a problem with my settings? Is this a known on the side of lightroom problem? Will there be improvements corrections? This may be due to active d-lightning without knowing about this in lightroom?

  Thanks for any help and suggestions!

  There is a problem of Posterization with the camera matching profiles having Lightroom for the D810. This could well be her. As I know there is no update for those yet. Try a different camera such as Adobe Standard profile. If this resolves the Posterization that this question and you will have to wait for the next update of Lightroom to get updated profiles to update (I hope).

  > This can be caused by active d-lightning without knowing about this in lightroom?

  No, but it is advisable not to use all modes like this in camera when you use Lightroom or any other software gross non-Nikon because all that camera RAW isn't to underexpose it and save a statement to apply treatment HDR with Nikon raw software. Other software will not be able to read as the statement and it will make images appear underexposed because they are in reality.

• [HELP] Problem with the restoration and recovery in the new host

  Hi, guys!
  
  I have tried for two days, but still can't make it work.
  I took a hot (online) full backup archive as well as the control file logs with the SPFILE and then copy the backup to the new host with the same directory structure and parameters. Finally, I tried to restore and recover the database on the new host, but failed during the restore process.
  
  The original host and the new host have the same subject Oracle installed until the patch level. I couldn't understand the solution to this problem based on my knowledge on Oracle DB.
  
  Could someone help me out here? Any advice would be appreciated!
  
  -----
  RMAN > restore the database up to the wire of the sequence 10 1;
  
  From restoration to November 8, 11
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01. DBF
  restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01. DBF
  restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01. DBF
  restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01. DBF
  restoring datafile 00005 to D:\ORA_DATADATA01. DBF
  restoring datafile 00006 to D:\ORA_DATA\DATA02. DBF
  restoring datafile 00007 to D:\ORA_DATA\INDX01. DBF
  restoring datafile 00008 to D:\ORA_DATA\INDX02. DBF
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BK
  P
  
  switch to the previous backup
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 11/08/2011 11:41:33
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore
  -----
  
  Here is some additional information you might want to know about:
  
  -----
  RMAN > list incarnation;
  
  
  List of Incarnations of the database
  DB key Inc key STATE ID DB name DB reset reset time SNA
  ------- ------- -------- ---------------- --- ---------- ----------
  1 1 PRODDB 3774691295 PARENT 1 17 APRIL 07
  2 2 3774691295 PRODDB PARENT 521803 6 OCTOBER 11
  3 3 3774691295 PRODDB PARENT 1595143 20 OCTOBER 11
  4 4 3774691295 PRODDB PARENT 1600974 20 OCTOBER 11
  5 5 3774691295 PRODDB PARENT 1952053 27 OCTOBER 11
  6 6 PRODDB 3774691295 CURRENT 2146951 7 NOVEMBER 11
  
  RMAN > backup recoverable list;
  
  
  List of backup sets
  ===================
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  37 full 822,34 M DISK 00:29:47 7 November 11
  BP key: 37 status: AVAILABLE Tablet: NO Tag: TAG20111107T175037
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BKP
  List of files to backup data value 37
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  2149673 full 1 7 November 11 D:\DBDATA\PRODDB\SYSTEM01. DBF
  2 full 2149673 D:\DBDATA\PRODDB\UNDOTBS01 7 November 11. DBF
  3 full 2149673 D:\DBDATA\PRODDB\SYSAUX01 7 November 11. DBF
  4 integer 2149673 D:\DBDATA\PRODDB\USERS01 7 November 11. DBF
  5 integer 2149673 D:\ORA_DATA\DATA01 7 November 11. DBF
  full 2149673 D:\ORA_DATA\DATA02 6 7 November 11. DBF
  7 full 2149673 D:\ORA_DATA\INDX01 7 November 11. DBF
  8 whole 2149673 D:\ORA_DATA\INDX02 7 November 11. DBF
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  38 full 6.95 M DISK 00:00:03 7 November 11
  BP key: 38 status: AVAILABLE Tablet: NO Tag: TAG20111107T182034
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_07\O1_MF_S_766606834_7CH8Q439_. BKP
  Control file included: cash SNA: 2151141 cash time: 7 November 11
  SPFILE included: Modification Date: 7 November 11
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  18,46 39 M DISK 00:00:05 8 NOVEMBER 11
  BP key: 39 status: AVAILABLE Tablet: NO Tag: TAG20111108T093359
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_. BKP
  
  List of newspapers archived on backup value 39
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 1 2146951 7 NOVEMBER 11 2149493 NOVEMBER 7, 11
  1 2 2149493 7 NOVEMBER 11 2149519 NOVEMBER 7, 11
  1 3 2149519 7 NOVEMBER 11 2149565 NOVEMBER 7, 11
  1 4 2149565 7 NOVEMBER 11 2149641 NOVEMBER 7, 11
  1 5 2149641 7 NOVEMBER 11 2172859 NOVEMBER 7, 11
  1 6 2172859 7 NOVEMBER 11 2197851 NOVEMBER 7, 11
  1 7 2197851 7 NOVEMBER 11 2220349 NOVEMBER 8, 11
  1 8 2220349 8 NOVEMBER 11 2222621 NOVEMBER 8, 11
  1 9 2222621 8 NOVEMBER 11 2222729 NOVEMBER 8, 11
  1-10 2222729 8 NOVEMBER 11 2223088 NOVEMBER 8, 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  40 full 6.95 M DISK 00:00:00 November 8, 11
  BP key: 40 status: AVAILABLE Tablet: NO Tag: TAG20111108T093411
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_08\O1_MF_S_766661651_7CJY84LK_. BKP
  Control file included: cash SNA: 2223097 cash time: November 8, 11
  SPFILE included: Modification Date: 8 November 11
  -----
  
  Thanks in advance!
  
  Jay

  In short, the RCS of the controlfile will be generally higher than corresponding SCN of the data in the event of hot backup (online) file; However, the two SNA will be the same in the case of cold (off-line) backup. Am I entitled?

  Yes, it's true. In a backup cold (assuming that the CLOSURE was not a SURRENDER but was NORMAL, TRANSACTIONAL, or IMMEDIATE) all files in the database (data files, redo log and controlfiles files) are 'compatible' - at the same point in time, to the same SCN. In a hot backup, the files are updated. RMAN is not necessarily take all the data files at the same time - for example when you have several data files, RMAN would backup the files in batches of 4 or 8 - data files are therefore controlled at different points in time. Similarly, the controlfile is saved last.

  Hemant K Collette

• Problem with the uploaded images.

  Having a problem with images is uploaded to the site. On a page, I have a tag div set to a certain size, but if someone downloads an image that is larger that the size of the div ignores the div size The size of the div is 500px 500px. I even tried a table with a size of game and still no go. I thought to use the cfimage resize function, but go thinking thought that if someone downloads an image that is not more then500px X 500px it will prolong the size I put and can blur the image, so I guess that's a no.

  Is there a way to force the image to do not extend beyond the size, I put in the div?

  OK, let's say the user downloads the image to/home/user/www/uploads, and file name is avatar.jpg

  You can do this:

  <>

  action = "resize".

  width = "500".

  height =""

  source = "" #uploadfile # ""

  destination="/home/user/www/avatars/avatar.jpg".

  Overwrite = "true" >

  <>

  action = "move."

  source = "" #uploadfile # ""

  destination="/home/user/www/avatars/avatar.jpg" >

  If the avatar is on 500px wide, it resizes and puts it in the folder avatars (or wherever you want to go).  If this isn't the case, it just moves.  The 'userimage' in userimage.width is just the name = "" of the first tag . "  It can be anything you want, as long as it fits the name.

• Problem with the import image

  I'm having a problem with an image that is deformed when fired in Captivate.
  
  Here's the original image in PowerPoint:
  [IMG] http://img511.imageshack.us/img511/5215/originalinpowerpoint.jpg [line]
  
  Here are what Captivate 3 pulls inside:
  [IMG] http://img255.imageshack.us/img255/8338/problemincaptivate.jpg [line]
  
  Notice the right side of the red zone? As you can see, even if it is the only slide, without text, it always distorts. I tried as an animation and a background image, each time the same mistake.
  
  Any direction as to what I can hurt? Unfortunately, my company does not allow my update to Captivate 4, so I'm stuck here where I am at the moment be.
  
  I have appreaciate the assistance.

  Hi there Hexfyre

  I can't explain why it happens. But if it's a one, you could work around it by simply screen capture the image in PowerPoint and it burst in Captivate. Which should make an exact copy of what you see in PowerPoint.

  See you soon... Rick

• Problems with the restoration of a previous session

  Hello! Earlier today, I closed my window with the option "save the tabs for the next time." I then restarted my Firefox and all I got was a blank white screen. I waited for awhile and then closed the window. When starting Firefox again once, I looked at the option "recently closed windows" and it is the normal color of black, not gray. When I moved to select, it did not bring the list of my windows closed, but a very very small white box. Clicking on it did nothing. I tried to go to about: sessionrestore, but the box had no option in it at all. Nothing to click or highlight. I read a little on similar issues, and I backed up all my "sessionstore" type options in the profile folder just to be safe. I tried the method of the first name change the sessionstore.js to sessionstore.old and took the file sessionstore.bak - 20132025151332 and replacing the .js .bak. No luck. I also tried to delete the original .js file and try again the .bak to step .js. I have to do something wrong, because whenever I have restart Firefox, all I get is the start page. I activated the option "when Firefox starts, show my windows and tabs from last time '. It is said that the original .bak file is dated 11/04/2013, and I also have a file sessionstore-1 dated 6. The original .js is dated from 10. Any help is very appreciated! It is quite upsetting to lose so many important tabs. Also, my computer is running Windows XP. Thank you very much!

  If the sessionstore.js file is corrupted, then you may not be able to restore this session

  There are a few examples of how extract a sessionstore.js file links in this mozillaZine forum thread.

  • http://forums.mozillazine.org/viewtopic.php?f=38 & t = 622036 & start = 60 & p = 12098147 #p12098147

  In case you use "clear history of Firefox closing:

  • do not erase browsing history
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/clear+recent+history

• Problem with the restoration of the system

  Hello

  I can't restore my system to an earlier time. When I try to restore, the computer stops and seems to go through steps, he needs to in order to restore but when starting, even once, it displays a message saying "system could not be restored (date/time). Please select another restore point. "The problem is that even if you select another restore point, is the same thing. I ran my anti-virus program and no viruses are detected. Any ideas?

  Hello

  Maybe the created restore point has been corrupted or the option has been disabled.
  I studied in the net and found the FAQ from Microsoft document on the Restore tool in Windows XP.
  http://www.Microsoft.com/technet/community/newsgroups/faqsrwxp.mspx

  Maybe it will help you.

• Problem with the documents/images being too large

  I can scan using the HP Officejet J3680, but the images are too large to email. I tried scanning the documents in TIFF files, PDF files, JPEG files, and they all do the same thing. I recently bought a computer from Gateway with Windows 7 already installed. My last computer has XP and worked very well with the same material. I updated the drivers and downloaded the HP Solutions Center, and nothing seems to help. I have cause to scan and send documents frequently and it is very frustrating.

  Looking for a parameter in the scanning software can specify a lower resolution.  Boulder computer Maven
  Most Microsoft Valuable Professional

• Problems with the restore points very limited available in the system restore

  I found that I can't go further than 3 days on the system restore points. I have noticed for some time and it causing problems. I can't go back to the previous month. Can someone tell me why?

  YES-open SR-glance left to SR parameters - click sur-put slider for max.

  min he won't give you a few days.

• Strange problem with the preview image paused in the two Source/program monitor

  

  I have updated to OS X El Capitan (impossible to uninstall El Capitan currently) and now whenever I'm on break on any image in first Pro CC 2015 (Source/program time) I get this strangeness of ideas? Once I hit the game everything is good and normal, once again but the second I stop playing, that it is this strangeness.

  Rendering the chronology did not jack and I deleted all my preferences / uninstalled and reinstalled the program also. Help please, I have two projects I need to finish but I can't do all the color currently fixes.

  See you soon,.

  Heads up on first with El Capitan

• Problem with the BLOB image recovery

  We are on Coldfusion 9,0,1,274733. I checked on "Enable recovery of binary large object (BLOB)" on the database, but the picture is always cut (3/4 in part gray). On our dev server, it works perfectly, our production server gives just partly gray images. I checked the settings of CF database between dev and production, and they are exactly the same. We rebooted the server, but still the same problem. It's like Coldfusion does not see tuning changes. Does anyone else have this problem?

  We have found the solution. Our production servers are in a clustered environment. You must enable "Enable recovery of the binary large object (BLOB)" at the level of the instance cluster. You will need to make this change on all instances in the cluster. I was only to 'local' level on each server in the cluster (which didn't work).

  In CF Admin:

  Enterprise Manager > Instance Manager > select the instance and select BLOB