HA does not not as expected on the ESX host

Similar Questions

• After that I changed the Duplex parameter on NIC's Service console, I am not able to connect the ESX host

  Hi all

  Please help solve my problem.

  After that I changed the Duplex parameter on NIC's Service console, I am unable to connect the ESX host. How can I reset the 100 MB NETWORK card duplex. Can someone help me please.

  Concerning

  Vijay

  Hello

  As the bulb you have two problems that are not related.

  (1) duplex setting, your switch and NIC must match. If one is assigned to auto-negotiation, then the other must be set to auto-negotiation. Personally, I tend to let auto-negotiation unless there is an absolute reason to spend. If you then turn on the both sides of the interface, the switch port and esxcfg-NICS allows you to change the duplex, etc.

  (2) passwords for root are not related to the network unless you have also run esxcfg-auth authentication remote.  The only time I saw what you have here is when the system is configured to try to authenticate remote and not locally.

  The two problems are fixable by booting into single-user mode, set the duplex and reset the password.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• VMWare Server 2 does not automatically start on the Linux host

  Hello

  My problem:

  When I start my computer (Linux Suse 11 (64-bit), then VMWare Server is not running. So I have to open a terminal, get root, and then /etc/init.d/vmware start.

  I would like to have this done automatically.

  I have an entry in /etc/init.d/rc5.d/ called S19vmware, but it seems that it doesn't matter, and I can't find an entry in dmesg or var.

  I have a few entries in /etc/init.d/: vmware, vmware autostart, hearts vmware, vmware-mgmt, the link in /etc/init.d/rc5.d/S19vmware tip vmware_start to... /VMware is that correct?

  Any help appreciated.

  Thank you

  Dirk TheSheep

  I had the same problem on my openSUSE 10.3 x 64 host and found that setting RUN_PARALLEL "no" in/etc/sysconfig/boot ensured that vmware services launched at startup.

• help - vm to 100% with Betclic resources cpu, but the ESX host to 15% cpu

  Hi all

  5 * HP BL460c Blade each with two Quad Core Xeon E5450 and and 8 GB of RAM.

  ESX 3.5

  VirtualCenter 2.5.0

  DRM and active HA.

  I need assistance with resource pools. Currently I have them all together for:

  • expandable

  • unlimited

  for the CPU and memory. I tried without reserve and with reservations, and it is indifferent to the result.

  I'm running a server SQL2008 (2 * vCPU, 3.5 GB of RAM) which is pretty hard. and from time to time the cpu usage spikes to 100% (6 GHz) and saturate at this time here. When I go to the graphs of the ESX host, I see up to 3 physical processes responsible... and all the others are dormant...

  I'm working on why he no longer not affected resources of the ESX host. I thought that because of the resource sharing (unlimited), he could catch resource from the pool of resources of the parent (unlimited). And our Installer is very very little used - so much processing power/mem available spare parts.

  I have also some really stupid questions:

  • with SMP, 1 vCPU means only 1 pCPU host is used?
    I never thought that this true, but in this example, it seems that only 2 pCPUs on the host are used... maybe 3,.., it is difficult to tell from the graph

  • a virtual machine can use more resources from a host at the same time?

  with SMP, 1 vCPU means only 1 pCPU host is used?

  I never thought that this true, but in this example, it seems that only 2 pCPUs on the host are used... maybe 3,.., it is difficult to tell from the graph

  Yes, assign you a resource equivalent to a virtual machine to the host.  Therefore, if you assign 1 vCPU which is equivalent to a unique Jepp on the host computer in the slot.

  a virtual machine can use more resources from a host at the same time?

  No. a resource pool is on a cluster, but VM inside this POOL can only use a single host resources.  The case is from ESX can use DRS to load balancing force of the VM, the pool determines the overall consumption and that you assign VM accordingly.  But ESX is not yet there to physical resource take other hosts.  What ever host is on, it is that the only place these resources can be achieved.

  What process the SQL 2008 taking up the CPU process?  I think it's SQL Server, in which case it is not that you can do.  One of the reasons that I discourage using VM for SQL, SQL works not virtualized.

• iTunes on pc does not recognize my iphone. the pc does. the iphone asks me to allow access to what I do

  iTunes on pc does not recognize my iphone. the pc does. the iphone asks me to allow access to what I do

  Hello

  Check this help page: If iTunes does not your iPad, iPhone or iPod - Apple Support

• As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will

  As it can be seen in the OS 3 Web page will be available today, 13 September. However my Watch App does not seem to see the update according to the availability. When I go to software update, he repeats that my watch is up-to-date with OS 2.2.2. OS3 will be available today?

  Hello

  Yes - Apple advises that watch OS 3 is scheduled to be released sometime today.

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• By pressing the home button does not take me to the home screen of iOS 9.3.3

  I have recenly updated upgraded to iOS 9.3.3 and I noticed that pressing the home button does not take me to the home screen. The only way to get there is by using the creature of multitasking. (double pressing the home button) Also, some applications seem to freeze if turn my phone off and then turn it back on, or when I access it via the multitasking function. Can someone please help?

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• address bar does not respond by typing the URL and press on enter

  Address bar does not respond by typing the URL and press to enter. All the other links work well. I used version 7 and version 8 upgrade did not fix the problem

  I had the same problem. I just uninstalled digsby ask toolbar, and now it works.

• My firefox does not work llook like the most recent version. I downloaded it on my aunts comp and in the corner upper lft, there's a firefox orange box but still just mine has firefox symbol.

  I had firefox for over a year and I recently installed on my computer of aunts. When I've done in the upper left corner, there was an orange box that says firefox on it. I have recently installed on my computer and it's always the same, as I had before. (Just the symbol of firefox) How can I get the latest version? It does not say I have the 6.2 or what is the most recent. Thank you in advance for the quick response to my question.

                                      Amy Vitko
  

  The current stable version is Firefox 6. 0.2

  https://support.Mozilla.com/en-us/KB/how-do-i-get-Firefox-button
  Why can't I see it?

  To make Firefox look like other programs in Windows XP, the menu bar is displayed instead of the Firefox button, while under Windows Vista and Windows 7, the button is displayed by default in Firefox.

• Corsair POWER supply update does not post, powers of the powers of 5 seconds down and loops...

  Have the HP Pavilion Elite m9650f with motherboard replaced in April 2012 class good to go.

  Replaced the stock GPU Nvidia GeForce 9800 GT with a Zotac GTX 560 Ti GPU and

  the stock HP 460 Watt power supply with a W0388RU Thermaltake TR2 600 Watt PSU in may 2012.

  All goes well until October 2012.

  PC randomly starts shutting itself off the coast and not feed until I have unplug the power cord and wait 5-10 minutes.

  Finally, he stopped turning on all together.  Reinstall all power PSU connectors, etc.  same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstall the stock HP 460 Watt PSU, now everything works fine.

  Thought it was a premature failure of Thermaltake PSU.

  Bought and installed a Corsair CMPSU - 850TXV2 850 Watt power supply for a few days but still not good to go.

  Lights, fans spin, but no MESSAGE, no video, tracks for all

  5 seconds, stops, turns on itself over and over again.

  Reinstall all power PSU connectors, etc. same result.

  Removed all cards, etc, same result.  Cards reinstalled one by one, etc., same result.

  Reinstalled the HP PSU stock, now everything works perfectly again.  ?

  Spends hours reading the forums...

  Some say that the RAM may not report correct voltage for power supply.

  If so, what can I change RAM voltage in the BIOS?

  Others say reset CMOS I did, same result.

  And someone on this forum HP thought that perhaps the Pegatron IPMTB-TK

  Card mother Truckee can only accommodate up to 750 Watts POWER supply.

  Any ideas?

  Can I get away with just using my HP 460 Watt power supply after all stock?

  Thank you.

  I have an additive to add to this topic.

  To refresh, my questions focus on a possible shift of the power supply and card mother specs:

  What is an ATX 12 v 2.0 and above technical problem or a power CAP problem?

  I posted my questions on the Forum of power SUPPLY Corsair PSU

  at the same time and I paste it here now, a response

  to GUY of RAM.

  "Hey RAM GUY."
  
  Sorry I couldn't answer until now.
  
  Please specify the difference between the ATX 2.0 specification and 2.01
  
  Spec that the negative - 5 v Rail is not present in the 2.01 spec and
  
  beyond.  As I mentioned previously, the Thermaltake PSU that has been
  
  running in my 2009, HP i7 tour for 7 last month said 12 volt ATX 2.2
  
  on the case and even if the power supply HP OEM said 12 volt ATX
  
  2.0 in the technical literature, that I found on Google, the real PSU I have does not work
  
  have any note on the case ATX specification.  So I think it's safe to say, my
  
  motherboard does not have the negative Rail v-5 at which he played
  
  nicely with 12 volt ATX 2.2 spec, until recently.
  
  Although theoretically it is supposed to be no limit on the amount of
  
  Absorbed power, you can use to power your motherboard, the motherboard because
  
  is supposed to use only what suits him and cap the rest, it seems that the OEM
  
  can dial up limitations of power if they deem necessary.
  
  Could be as simple HP, without wanting to compete with some of his HPs
  
  Professional workstations, caps so power on some Pavilion Elite
  
  Series models to prevent them from becoming a much cheaper
  
  solution.
  
  In any case, I think that all the available information, digested, he does not speak
  
  Specification of the ATX, but rather my motherboard HP has a limit of 650 Watts of power
  
  If I think that I read that someone else got the same motherboard goes with
  
  750 watts, but I do not remember where to find this announcement. »
  
  I'm back and Yes!
  
  Thanks again Lasvegaswireman!

• I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help!

  I accepted the last update. Now, I can not display to the right of the main Itunes store, where top songs, etc would be. As the screen does not. Only on the HOMEPAGE of ITUNES STORE! Help! I've tried everything. Google it. Searched through itunes, etc. It MUST be a bug, because it started right after I accepted the 12.3.3 update on my laptop running Windows 7 32.

  I count on the part of the main screen, which is not. Its strange. PLEASE HELP ME! In addition to the main page of the Itunes Store, everything else works fine as before. Music from my library work screens, etc.

  I also have exactly the same problem since the last update. Tried to find a way to solve the problem but no luck. Someone please help!

• Why did I downloaded Firefox 4.0, but I do not have the firefox orange box in the upper left corner of the screen. My screen still looks like the old version of firefox. My screen does not resemble that of the video. nothing like that

  My Firefox 4.0 does not resemble something like the videos you show on the new Firefox features. My screen looks completely different from yours. It doesn't have the orange box in the upper left corner of the screen. My screen still looks like the old version. I have the logo on the top of my screen with ask a Question, a vertical line helps Firefox - Mozilla Firefox.
  Under this heading, I have File, Edit, View, history, Favorites, tools, and help. Below this line is a tab Ask a Question Firefox Help and has +. The screen of my husband looks identical to the orange box of Firefox in the upper left corner of the screen. I wish that my screen look identical to those shown in your videos. I have a version of Firefox 4.0 my husband has the Firefox 4.0 and the beta version. How to add the beta version? I have Windows Vista running systems. Help, please. Thank you

  To get the new interface, you need to hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

  If you need to access the menus, you can press Alt or F10 to display temporarily.

• Whenever I run Firefox, it appears an error message indicating "Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist." Contact the author to this problem. »

  Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist. Contact the author to this problem.

  The above statement is in the box pop up error every time, when I run Firefox. If I click on ok in the box of Firefox opens. How can I solve this problem of initialization/launch?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')