help - vm to 100% with Betclic resources cpu, but the ESX host to 15% cpu

Similar Questions

• Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  Hi, I use Adobe Photoshop Lightroom output CC Camera Raw 9.5 2015.5. I am now with Nikon D4s shooting but the lightroom does not read the RAW format. Why? Is it possible to import the RAW files in lightroom? Thank you for your help

  I'm not an apple person.  I read on a few different forums that apple has changed what is called 'writing' in a recent update to apple.  You may need to find an Apple expert to show you how to make sure you are allowed to write to files or locations on your computer.

• Question ESXi 5.5 with turn a virtual computer: "an error was received from the ESX host turning on VM" '22 (Invalid argument)"'DiskEarly on a power Module failed.'

  Here's what happens when you try to turn it on one of my virtual machines (see also accessories):

  Error stack:

  An error was received from the ESX host turning on VM vzilla-ws2012r2e.

  Unable to start the virtual machine.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_3.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  Power DiskEarly module has failed.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_4.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  This circumstance may be linked to a sata cable issue, with the possibility of temporary loss of connectivity, which could result in data loss/corruption, I realize.  It is a laboratory box.  Especially say that the 2 VMDK he complains (trying to light) is both on the grounds of a single physical disk. Data, read and written to the speaker, since the problem are very good (which indicates the wiring problem was resolved, and the VMFS5 file system seems to be in good health).

  No photos.  No related clones.  Just a 2012 Windows Server based VM, with several drive letters in, with those underlying files VMDK residing on different stores of data VMFS5.  Implemented end (these drives aren't really so huge), but far from running out of physical space for the data either. Everything is working great for months, until today, trying to it turns on again.

  You are looking for:

  "Failure error disk beginning module lit" results in this article:

  error disk on start module failed

  which indicates the .lck files may be present.  It does not exist.

  Then upwards, of a variety of other items:

  Re: Unable to start the virtual machine: invalid argument on *-flat.vmdk

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004232

  https://communities.VMware.com/message/search.jspa?peopleEnabled=true & userid = & ContainerType = & Container = & q = module + DiskEar...

  error disk on start module failed

  but alas, none of them seem to relate directly, or exactly.  My vmware.log file is attached below, as well as some screenshots of to show the structure of the unity of this virtual machine.  Hoping that this post proves fruitful, if anyone has had a similar situation.  The data at stake here are (mostly) redundant, but I would rather understand my way of it, in the case where it happens to me again, or can help others.  Many preferred rather than give up, reformat the VMFS and start again.

  Thank you!

  Good news, the best result I could hope. No data is lost. No corruption of the VMFS or NTFS don't drive in the virtual machine. Nice!  Saved me a few terabytes of data restoration and learned a little more on file system of troubleshooting along the way.

  It took a technician of VMware Service excellent, attentive, methodical remote 2 hours in a WebEx previously to resolve problems with these 2 files vmdk manually, because he found that there is a lock on them. I opened a request of Service (SR) # with VMware by following the instructions here:

  VMware KB: Cannot access certain files on a VMFS datastore

  To resolve this problem, apply for support from VMware Support and note this ID (1012036) Knowledge Base article in the description of the problem. For more information on the filing of a request for support, see How to submit a support request.

  I'll cover this saga and the exact process for collecting and downloading of newspapers, through to my TinkerTry.com, including the ride video.  I even captured much of the technical work that has been done. That said, it is true that little of the magic that was made to resurrect the metadata will remain a mystery, given that this piece is VMware.

  I'm ok with a bit of black box, considering how I'm happy that I got all my data, and time savings that the quick recovery represented.

  By clicking on the button "answer".

• I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TV says wrong user

  I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TVsaybadusername password or.

  Your ATV1 has an old software system not updated for years.  You have 2 factor (6 digits) or authorization of step 2 (4 digits) enabled for your Apple account.  Here are the characteristics of the latter.  I disable these on your Apple account and try again.

  For Apple ID - Apple Support two-factor authentication

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• OCIEnvCreate failed with return code-1, but the text of the error message was not available. »

  OCIEnvCreate failed with return code-1, but the text of the error message was not available. »

  I get this message (error) after update my customer Oracle 9.0 to 10.1 (used in the .net Oracle connection)

  I would like to get a resolution? If someone has experiece with her.

  THX

  Hello

  To improve assistance to this subject, you can ask your question in the MSDN Forums.

  NET Framework

  http://social.msdn.Microsoft.com/forums/en-us/category/netdevelopment

• Naming of the ESX hosts with the underscore. Best practices?

  I was curious as to what that the general eager to name the ESX hosts with underscores "_". I found an old post in 2006 related to it:

  http://communities.vmware.com/thread/64885

  In the thread, it is usually frowend against because she not compling with DNS internet naming standards. The underscore character is not recognized by the Web servers.

  He has been wondering if there would be no advantage to include similar underscore characters with no routable ip subnets, 192.168.x, 10, etc...

  If you have designed it correctly you already have your hosts on a subnet that is not routable, so you would get no real benefit.

  Beyond this thought experiment, there are problems with your esx host with ESX, vSphere, vCenter naming universe underscores?

  Just an info

  All my guests have underscore in them. I had to replace all of them with a dashboard because ESX 4.1 will not accept underscore after upgrade to the console.

• who can help me with "insufficient resources to meet the level of failover configured for vSphere HA.

  Hello world

  We tried to gif a 14GB of ram and make server complete a booking for her.
  This is a server for the exams and the vendor told us to do.

  I can't any more then 5500MB reservation on it, when I anymore that I get
  "Insufficient resources to meet the level of failover configured for vSphere HA.

  We have:

  2 X 5.1 ESXi hosts
  Each host has
  2 x processors (8 Cores each) with HT active.
  255,75 GB of Ram

  vSphere HA has been activated.
  Admission control policy is enabled and that the ability to failover is 1 host.

  What is the problem here?

  Thank you
  Ernst.

  
  

  Admission control policy is all about to give you the kind of guarantee that if the host failure happens then there will be enough resources to perform the successful failover.

  in simple terms, it comes to reserve the resources of failover.

  I would recommend going through the notion of vSphere HA, reduced control policy the following document.

  https://pubs.VMware.com/vSphere-60/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-60-availability-Guide.PDF

  From the Page number 22, the details that you need to study is given. Focus especially on part calculations Slot size of it.

  in your case you HA vSphere with number of failure of host to tolerate as admission control strategy defined.

  This means system will calculate CPU and memory slots out of the resources in your cluster, and the total number of units, it will keep some resources like reserved for failover, and others will be available to be used. It all depends on how much failure of hosts that you want to tolerate.

  now in your case, if you try to increase booking one of the virtual machine, which will then affect the number of locations in your environment, and so reserved ability to failover is violated, the system will not let you do what you want to do. As the energy on a virtual machine, or growing booking a powered VM etc..

  If you find that you have enough resources in your cluster and due to some virtual machines with very large cpu or memory reservation, number of places is less than you can still manage the settings some advanced in vSphere HA configuration, but I strongly recommend, try to take the help of someone who has done it before.

  also try to go through other admission control strategies which are explained in the document for more inputs.

• BlackBerry Smartphones HELP GUYS... App world installed, but the missing icon

  Hello.. Please please please give me a solution... I have a bb torch 9800... I received a msg to upgrade global app... after the upgrade... I can not find the global icon... Although it is installed on my phone... the icon is not the case to find. I tried to remove and reinstall but the icon does not appear... Help... I'm going you crazy... its so frustrating.

  Try this-

  When your device is turned on, remove the battery for a minute and then reinsert the battery. This do a reboot your device that addresses minor issues with the BlackBerry.

  If make above don't resolve the issue, then follow the instruction articles knowledge base being:

  • KB29422 BlackBerry App World icon is missing after upgrade to BlackBerry App World 4.0.0.63 to 4.0.0.65

• Problems with FTP - connected successfully but the site does not update.

  Hello

  I was in need of an update to my site and see now having problems using FTP Dreamweaver CS4.

  I had to reinstall Dreamweaver on my system (as also, need an update). And had to remind myself of all the information that must be entered in Dreamweaver. However, this is not where the problem is, I can successfully contect to my host and load the files on the server, but then I reload my page of website and nothing has been updated. I tried numorus attempts to solve this problem on mine but without success.

  Is this a bug with CS4? Or should I use an external FTP program such as FileZilla?

  Any help would be appreciated.

  > Would it be the only thing that would cause me problems?

  No, it could also be your local site definition. If your local site root is set to the level of the fake, so files don't download to the right folder either.  Can you show us a screenshot of your local site definition?

• My Calendars ipad2 entries synchronize with my iphone 6, but the 6 s iphone calendar entries will not sync at ipad2?

  My Calendars iPad2 entries synchronize with my iPhone 6, but iPhone calendar entries will not sync to my iPad2?

  If you use iCloud for you calendar, then they must synchronize.  Is enabled on both devices under settings-> iCloud calendar?

• Win7 with FF 31, smart phone 4.2 with FF letest ver. using the same account with 1 email. But the phone is not getting any collar, Bokmr, etc.

  Brother.
  We use win7 with Mozila 31, 4.2 with Mozila Android smart phone latest google app store on 04/10/0214. Using the same account with the same email. But the phone does not get any new information of win7 with Mozila 31. PL z give useful information.

  Hi w3ur_team,
  Thank you for your question. I understand that there are two features that are documented in the sync account. However the Android is not synchronized.

  There are two places we can check:

  1. In the Android settings, under accounts is the Firefox Sync or Firefox Sync (discouraged) joint account?
  2. Credentials work on accounts.firefox.com on the mobile device and are there any error messages in the synchronization of the settings menu > sync?

  See also Firefox Sync troubleshooting and tips for more troubleshooting steps.

• OK so I connected my iPhone 5 s for my Macbook Pro with a USB cable, but the system settings it is NOT CONNECTED, even if it triggers iTunes to open. Do not get internet connection on the MAC how come the system settings shows USB not connected

  I connected my iPhone to my Mac using a USB cable, but the Mac connected USB not appear, even if iTunes opens

  The Mac has no network to the internet via a port USB, WHY NOT?

  Where in the Panel are you looking for? And what you're trying to do with the phone? Transfer files? Share an internet connection?

• Average use of CPU and memory of the ESX host

  Dear team

  script of powercli necessary to fetch the last 2 month avg cpu and memory utilzaition for all ESX hosts that are managed by vcenter server.

  concerning

  Mr. Vmware

  Try something like this

  $esx = Get-VMHost
  $start = (Get-Date).AddMonths(-2)
  $metric = "cpu.usage.average","mem.usage.average"
  Get-Stat -Entity $esx -Start $start -Stat $metric | Group-Object -Property {$_.Entity.Name} |
  Select @{N="VMHost";E={$_.Name}},  @{N="Avg CPU %";E={$_.Group | where {$_.MetricId -eq "cpu.usage.average"} |
      Measure-Object -Property Value -Average | Select -ExpandProperty Average}},  @{N="Avg Memory %";E={$_.Group | where {$_.MetricId -eq "mem.usage.average"} |
      Measure-Object -Property Value -Average | Select -ExpandProperty Average}}
  

• Help, please! Problem with QuickTime audio recording of the iPod?

  Before you start: I one day 32 GB 6th gen (newest) iPod Touch and uses a MacBook Pro with OS X Yosemite 10.10.5 early 2015. QuickTime Player is Version 10.4 (833.7).

  I have an iOS game and you want to record a video of my game using QuickTime. I want to record is just two things: the screen of my iPod (to show the gameplay of course) and iPod audio (to listen to the music of the gameplay, sound effects, etc.). I play with headphones plugged into my iPod, so, naturally, I want to listen to the game and have the video recording, the audio of game as well.

  Unfortunately, a problem arises however. I insert my iPod in my computer, ready to start game and the headphones plugged into the iPod. I open QuickTime, then click on "file > new Movie Recording. From the drop-down list next to the button REC / I click on "camera > iPod of [my] Touch" and "micro >" of [my] iPod Touch '.» Immediately I can't hear my headphones... ! However the emulation screen iPod appears perfectly on my MacBook.

  If I press the record button when even just to see what happens. I recorded about 20 seconds of the game and click on stop. Pretty funny his returned to my headphones right when I stopped recording! Nevertheless, I plugged my iPod headphones on my MacBook and played the video I just recorded. The 20-second video has audio PERFECT, everything in the video went extremely smooth and no audio/visual of all issues.

  I wanted to keep trying, then instead of having already my headphones for my iPod, I tried to open QuickTime with my headphones unplugged; and then plugged my iPod after QT has been opened. The emulation screen FROZEN unlock and then when I unplugged the headphones. Unplug and plug in any again gave the same results. I waited a few minutes later headphones, then plugged back in. Surprisingly, I could finally hear audio and emulation of the screen has not frozen, but when I pressed on the record, the record got stuck on "0:00"- and when I pressed the stop button, it gave me an error message saying "unable to save" try save again. " I tried everything several times for a few hours and nothing has changed. Is there something I'm missing... ?

  (TL; DR) so I have to ask. Why play video recording of my iPod QuickTime audio perfectly, but when recording, I don't hear any audio through the headphones of my iPod at all? Audio output when recording is stopped.

  Sorry for the long message and thank you very much for reading and any help!

  Why play video recording of my iPod QuickTime audio perfectly, but when recording, I don't hear any audio through the headphones of my iPod at all? Audio output when recording is stopped.

  Your recording QT X settings say the iPod Touch to divert temporarily the iPod Touch audio pipeline (normally sent to the internal speaker/headphone port) to the Lightning-USB connector to connect to the application of QT X reader when recording. When the registration process is complete, the iPod Touch will automatically reconnect the audio pipeline diverted to the internal speaker/headphone port.

  

• How can I change an application to use another library with a different name but the same name for public (easily)?

  When you perform comparisons between the programming approaches I create two libs with the same public calls but different internal components. Nothing special there. Unfortunately when I pass my test app to a lib to another, the application loader asks an all audiences of vi. But I thought I read somewhere that the application loader would get the idea where to look after that I saw the first public call to the new lib. Doesn't seem to work. With the help of 2010.

  Pull the lib not used out of the machine. Rename the current library under the same name that you used. Project save everything. Close to LabVIEW. Remove the current lib. Copy the another lib to the machine. Not necessarily easy but here's how I did similar exercises in the past.