HA/FT if the hosts are remote of 100 m (330 ft)

Similar Questions

• The reports are limited to 100 pages only in ACS worm 5.4

  Hello

  I can't export more than 100 pages of report viewer. Is it possible to export a full report to CSV?

  Kind regards

  SYED

  This is known to cisco. The GBA 5.2 guide speaks of the same.

  «The observer logs & reports ACS is limited to 100 pages.» ACS applies filters as last 30 days only on the pages of the top 100. In case of very strong load monitoring reports & ACS Viewer may not able to view complete information for the filters such as 30 days. During the critical period, it is recommended that you export the data to a CSV file after generating the report for every one or two hours. »

  User Guide:

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_system/5.2/user/guide/viewer_troubleshooting.html#wp1077489

  CSCtq06579    ACSview reports carry only 100 pages

  I guess that in ACS 5.5 this limit will be 500 pages.

  Now you can go through the link below:

  https://supportforums.Cisco.com/docs/doc-28117

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• ESXi hosts are disconnected from the vCenter (5.5)

  Hi all

  We have a little problem with our vCenter.

  We have two hosts that are connected to the vCenter, unfortunately, they are listed as disconnected.

  It seems that the problem are the SSL certificates on ESXi hosts that are no longer valid.

  If I replace the old certificates with new ones, that I have to restart the ESXi host, am I right?

  If so, that's the problem.

  We do not use any what automatic vMotion and as long as the hosts are not connected to the vCenter I can't manually, move right?

  Is it possible to connect hosts to vCenter without SSL?

  Sorry for my bad English, I'm not a native speaker.

  See you soon,.

  Johannes

  You need to replace the ESXi host SSL certificates.

  See the Docs for the replacement of ESXi Cert below.

  ttp://www.BlueBox-Web.com/2013/04/18/replace-ESXi-certificate/

  Documentation Centre of vSphere 5.5

  I had regenerate the ESXi 5.5 SSL certificates, which I did without any stop to virtual machines.

  Certificate replacement process can change based on the esxi version.

  According to the Doc, vSphere 6.0 Documentation Centre ESXi6 host must be rebooted to replace certificates.

  Anyway, in current state disconnected, you can try to regenerate the self signed SSL certs, restart management agents and try to reconnect host in vCenter.

  Thank you

  Hentzien

• Configuration of host and remote business partners

  Hello
  
  As new B2B, I have a very basic question.
  I have two machines, one which I use as a host of trading partner the other remote business partner. The steps in configuring the host partner would be the same as those required for the configuration of the remote trading partner?
  Currently the commercial host end partner, in addition to create identifiers for the host partner commercial, I am also
  1. create the remote partner
  2. create the credentials for the trading partner in the distance
  3 assign documents to the remote trading partner and
  4. creation of the delivery to the business partner channel.
  
  I guess I should do a similar configuration to the remote end of trading partner, before creating agreements for business partners.
  Is there something else that needs to be handled?
  
  It would be awesome if someone can share step-by-step instructions that would be required to set up the host and remote business partner. I use Oracle 11g B2B and have not worked with previous versions of B2B.
  Any help in this direction will be greatly appreciated.
  
  Thank you
  Priya.

  Hi Priya,
  Steps are correct and you must configure both machines.

  You can reference B2B samples available in samples of SOA in link below:
  http://www.Oracle.com/technology/sample_code/products/SOA/index.html

  In this step by step instruction, guide is available.

  You can check out below recipe books:
  http://www.Oracle.com/technology/products/SOA/B2B/collateral/B2B_TU001_EDI.PDF
  http://www.Oracle.com/technology/products/SOA/B2B/collateral/B2B_TU002_HL7.PDF
  http://www.Oracle.com/technology/products/SOA/B2B/collateral/B2B_TU003_ebxml.PDF

  Please let us know your protocol and usecase to know more details.

  Rgds,
  Nitesh jegou

• Clean shutdown for EqualLogic PS6100 without stopping the host/iSCSI initiator

  In fact, I've known the procedure on how to stop the Equallogic PS storage. But I have a question as well as the procedure.

  Do you really need to stop the iSCSI initiator or the host connected to the storage before you shut down the storage controller?

  Because we move the Equallogic box on the rack on the other. I just want to stop the Equallogic without stopping the hosts.

  Hello

  The hosts are connected to some other storage that you want to keep as you move the table EQL?  If you stop the storage, it is similar to pulling on a hard drive in its operation.  Most of the time nothing bad will happen.  But all entries that did not allow the storage is lost.   For applications such as SQL or Exchange is not something you want.

  If you need to keep the server up, stop all applications accessing the volumes, then disconnect all EQL volumes first, and then stop the EQL table.  Will be served waiting for the written word.

  Kind regards

  Don

• iSCSI storage presented to the hosts managed by different vCenter Server - questions?

  I currently have three hosts (esxi 5.0) that are managed by vcenter server 5.5 U2. The hosts are attached to iSCSI LUNS (data warehouses) 10.

  I'm migrating to esxi 6.0 U2. For this, there are three new hosts have esxi 6.0 installed and managed by vcenter server 6.0 U2 U2.

  The plan is to detach/remove 5.0 5.5 U2 vcenter esxi hosts. Then import it into vcenter 6.0 U2 (a new cluster will be created). Once imported, uninstall the 5.5 vcenter u2. Then turn off the resident VMs imported esxi 5 hosts and move them to 6.0 esxi hosts.

  My query is regarding regarding storage.

  At present, three new guests see all storage the old 5.0 esxi hosts to see (guests are not in the cluster. "I'm still trying to put things up). That's because the new hosts were deposited to the same group on the side iSCSI initiator storage. Now things, data warehouses are visible by the hosts with esxi 5.0 (managed by vcenter 5.5 u2) and also the esxi hosts 6.0 (managed by vcenter 6.0 u2). The only VMs residing in esxi environment 6 is vcenter 6.0 u2 and update manager 6.0 u2. These are in a data store that is not any other virtual machines.

  That's no problem during the migration? I have not created a cluster for the esxi 6.0 hosts yet and plan to do after obtaining your entries.

  Thank you!

  No problem whatsoever, regardless whether if you do or that you add no vSphere 6 hosts in a HA cluster.

  If you temporarily enable EVC on the vSphere hosts 6, once all hosts are connected to the same vCenter you can VMotion all VMs to new hosts even without any stop. Clear CVS once the migration is complete.

• Impossible to select the host for the pool, can only select Cluster

  Hello

  I try to assess the view and go into the Guide of the evaluators.  When I set up the parameters of resource under the vCenter part settings of the linked Clone Pool where I'm supposed to be able to select a host or a Cluster, I have only the option to select my (not an individual host) cluster.  The problem is that not all hosts in my cluster have access to the SAN that I use for this assessment, so I wanted to be able to isolate the pool to a single host.  Is there some kind of trick to get the hosts present themselves individually?  The hosts are 5.5 ESXi and vCenter vCenter 5.5 Standard

  Thank you

  Dylan

  You can only select the cluster. "Host or a cluster" refers to the fact that if you have a stand-alone Host which is not in a cluster, you can use - so you'd have to move the host you want to use on a stand-alone host or in its own cluster.

  Mike

• Sharing data between the host computer stores in different groups.

  I read in several places that sharing of data warehouses between the host in different groups is possible, but I don't get the warm and fuzzies when the hosts are different versions.

  vCenter is 4.1

  Group Alpha is 4.0 vmfs 3.33

  Bravo of cluster is 4.1 vmfs 3.46

  My goal is to move the virtual machines that meet the specific criteria of group Alpha for Cluster Bravo then the availability of flowing freely between clusters.

  The only concern I have is when adding Cluster Bravo to the same host of 3PAR alpha value of Cluster sharing all the data store, Cluster Bravo will try to reformat to vmfs 3.46 break Cluster Alpha to see the virtual machines stored in the warehouses of shared data?  I don't want to present the old warehouses of data to the new cluster only break from old cluster.

  Hello vmsjsn

  ESX/ESXi 4.X supports all versions of VMFS file system.

  Using your example of Alpha and Bravo. Kudos to will write more Alpha. you will be able to cross all hosts on the shared storage.

• Not able to connect to the host ESX 3.5 by VC so customer VI

  The host ESX 3.5 has been disconnected from the VC, and we are not able to connect customer using VI as well. The virtual machines on the host are running without any problem.

  Got the message when tried to restart/start services of Mgmt. below

  # Service mgmt-vmware restart

  stopping VMware ESX Server management services:

  VMware ESX Server Host Agent Watchdog

  VMware ESX Server host agent

  Starting VMware ESX Server management services:

  Agent Host VMware ESX Server (background)

  Availability report startup (background)/etc/init.d/mgmt-vmware: fork: Resource temporarily unavailable.)

  # Start of Service mgmt-vmware

  From the VMware ESX Server management services:

  VMware ESX servre Agent Host (background)

  Availability report startup (background)

  status of service mgmt-vmware #.

  VMware-pass is stopped

  hostd.log - entries

  /etc/init.d/sshd command failed

  Didn't the /etc/init.d/sshd fork: Resource temporarily unavailable.

  Let us know the fix for this problem other than restarting the host.

  To know how to clean it, please read KB1007887 - defunct cimservera of process on VMware ESX 3.5 hardware management agents run and follow the instructions.

  André

• Vary the size of the host and the load balancing

  I have a 4 4-host ESX cluster that is almost the maximum ability to manage virtual machines ~ 80 (and growing).  The hosts are configured with 4 to 8 cores and 32 GB of RAM each.  RAM is currently the bottleneck; Processor is not far behind.  I plan to replace one of the hosts with a much larger machine, 12 cores, 96 GB of RAM.  If a host is significantly larger than the other hosts in a cluster, DRS will still do a good job of load balancing?  I guess the DRS will place multiple virtual machines on the host to the largest.  Is there a risk of DRS. putting too many virtual machines on the largest node?

  Until the cluster is in CVS mode, or processors are compatible vmotion, you can vary the size of the resource of physical machines in the cluster.  DRS will try to balance the load, the better it can over all cluster resources.  Depending on your level of DRS aggressive, improving to a particular machine in terms of past performance is considered, so more that likely, that you will have more vm on the host of the largest.

  -KjB

• Why the guests are locked on the 100% on HP DL 385 G5p memory usage?

  I have performed nearly identical systems in several secondary schools.  Some are based on HP DL 385 G5 with 2356 processor and some based on HP DL 385 G5p 2378 processor with.  Aside from the slightly different patterns of the host, the rest of the systems are the same (amount of RAM, number of processors, etc.).  Host servers running Windows 2008 core server.

  When I look at the graph of the memory (%) running, the virtual servers on the G5 rise and fall use and release memory as expected.  However, all the servers on the G5p are locked at 100% use of memory and never move.  Can someone explain this difference in behavior?  Influence the way I should plan for future expansion of the system, etc.?

  This is a bug... just install the exs4 update 1

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1014019

• Configure the virtual server to 2003 to use two physical network adapters on the host

  I have a virtual server (Server 2003) that I'm trying to point two virtual NETWORK card to two different physical NICS on the host computer.  The two network adapters on the host are on separate networks, and I can't get virtual network cards to connect properly.

  I use VMWARE Server 2 with the virtual network manager.  All good instructions would be greatly appreciated.

  Thank you

  Run the virtual network Editor.  Disable the automatic bypass.  Then, specify which of your physical NIC to the bridge to VMnet0 and specify the other physical NETWORK adapter on one of the switches (2-7, 9) unused VMnet.  In the settings of your virtual machine, select a virtual NETWORK adapter to be filled, and a 2nd we use custom connection and specify what VMnet switch to use (the one you filled the 2nd NETWORK card physical to).

• Install HA agent on ESXi 3.5u3 failed: ' year error occurred when setting up the HA agent on the host ".

  Hello!

  I of the improperly installed HA agent via vCenter to clean newly installed ESXi 3.5u3. It occurs in about 60% of the process 'Reconfigure for VMware HA': ' year error occurred when setting up the HA agent on the host ". Remote syslogI now have:

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.412 "TaskManager" 49156 info created task: haTask-ha-host - vim.host.NetworkSystem.refresh - 237

  Jan 14 14:19:56 80.251.112.51 spend: 2009-01-14 11:18:44.412 "NetworkProvider" 49156 info update the configuration of the entire network...

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.425 "NetworkProvider" 49156 information updated configuration of the entire network.

  Jan 14 14:19:56 80.251.112.51 pass: 2009-01-14 11:18:44.425 "TaskManager" 49156 info task completed: haTask-ha-host - vim.host.NetworkSystem.refresh - 237

  and no warnings or errors.

  In the list of features HA doesn't speak on the use of HA between the hosts, its all about the components within a single host HA capabilities.  You can cluster VMs on different hosts to VM HA, but not VMware ESXi HA

• How to change the pages look one at 100% to 90%

  All my pages can load on 90% - my husband added a printer wireless to my laptop and now the pages are loading in 100% - I want to return to the 90% load - HOW?

  If you are referring to IE, try this:

  In your status bar, bottom-right, Point on the Zoom, click the menu drop down > click Custom > set it to 90% >, click OK.

  HTH

• Start the host lock screen remote desktop session

  Is it possible to call the lock of a host machine screen remote desktop without interfering with any active session on this host?

  The host machine might have been locked by someone who just walked away from him or the host computer can be used remotely by its regular users.

  But despite this, I would use it to run a remote session to my regular machine.

  Hello

  Please contact Microsoft Community.

  I understand you are trying to call the remote desktop of the lock of a host machine screen. I suggest you post your question on scientists on TechNet.

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  Hope this information helps.