The reports are limited to 100 pages only in ACS worm 5.4

Similar Questions

• Right side of the text in the report are cut during report generated in PDF format

  Right side of the text in the report are cut during report generated in PDF format.
  In the report layout text is FLUSH JUSTIFIED. Text block is the same size as the outer frame.
  When the report is generated in PDF format, text is only JUSTIFIED to the LEFT and to the right looks like cut. Text beyond frame is invisible.
  But when I text selection in the PDF report that all the text is selected and I can copy and paste this text into any editor.
  What is a cause of this error and how can I solve this problem? In my view, there is error in report engine.
  Report Server Version: 10.1.2.3.0
  
  See photo. [http://1.bp.blogspot.com/_tSW8j23gT08/TKXn84zyRMI/AAAAAAAAAGE/KkNibanTSao/s1600/report_error.JPG]

  Don't know what your operating system and it could make a difference. If you're on Unix/Linux, try changing the uifont.ali file. (make a backup first!).

  Here is an example of the changes that I made to correct a similar problem:

  # Mapping of MS Windows

  #Arial = helvetica
  # 'Courier New' = courier
  # "Times New Roman" = times
  #Modern = helvetica
  #"MS Sans Serif" = helvetica
  # "MS Serif" = times
  # "Small fonts" = helvetica

  #Arial = 'arial.ttf '.
  Arial = helvetica.8
  "Courier New" = courier.9
  Arial.12 = helvetica.8
  #helvetica.12.Bold = helvetica.9
  #ArilMT is helvetica.9
  # "Albertus Extra Bold" = helvetica.9

  [PDF]

  #Arial = courier
  #arial = courier

  # Support for the languages of the far East:

  #itcadvantgardegothic = arial
  # "ITC front guard Gothic" = arial
  #itcadvantgardegothic = arial
  # "ITC Avant Garde Gothic" = Arial
  # changed to courier 06-25-2009
  itcadvantgardegothic = Helvetica
  #itcadvantgardegothic = arial
  "ITC Avant Garde Gothic" = Helvetica.11

  # Required
  #itcadvantgardegothic = arial
  # "ITC Avant Garde Gothic" = Arial

  [PDF:Subset]

  #times = "times.ttf".
  #courier = "cour.ttf.
  #helvetica = 'arial.ttf '.
  #arial = 'arial.ttf '.
  #helvetica = 'arial.ttf '.
  # 'Avant Garde' = 'arial.ttf '.
  #arial = 'arial.ttf '.
  #helvetica = 'arial.ttf '.
  #arial = 'arial.ttf '.
  #itcadvantgardegothic = 'arial.ttf '.
  #helvetica = 'arial.ttf '.
  #courier = "cour.ttf.

• sidebar on the desktop are not displayed images of only a red cross

  sidebar on the desktop are not displayed images of only a red cross

  Take a look at the following:

  Sidebar will not run on start up
  http://www.Winhelponline.com/blog/fix-Windows-Sidebar-does-not-start/

  
  Component cannot start Windows Vista

  http://www.Vistax64.com/tutorials/117192-Windows-Sidebar-will-not-start-Vista.html

  Sidebar Gadget not working not properly
  Note: look for responses from the veebull
  and president of the DNA
  http://social.technet.Microsoft.com/forums/en/itprovistadesktopui/thread/5d734cdb-757f-4801-8f28-3cca36ccf7ba

  How can I restore windows sidebar
  http://support.Microsoft.com/?kbid=963010

  How to fix broken sidebar
  http://www.howtogeek.com/HOWTO/Windows-Vista/how-to-repair-your-crashed-or-hanging-Vista-Sidebar/

  From: Daniel Martin
  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/802e24fe-4DD3-4EE3-b2b5-5eba88595598

• Refresh the report area of PL/SQL (not Page) using the value of the select list

  Hello

  I have a report region based on a "body of the PL/SQL function returning a query'which SQL is generated on the selection of a value of an element from the selection list, select action list is"Redirect and set", but this causes the entire page refresh rather than just the region report." I tried to update the report using only a dynamic action on the item list select (Action now reset to 'None'), but now the report does not appear on the choice of the list. Can someone suggest a solution that will allow me to update this report without refreshing the page? I use APEX 4.2.2 and the syntax of the statement is as follows:

  DECLARE

  v_statement VARCHAR2 (500);

  BEGIN

  SELECT query_text
  IN v_statement
  OF sql_queries
  WHERE query_id =: P2_QUERY;

  RETURN v_statement;

  END;

  where P2_QUERY is Select list item,

  Kind regards

  Kevin.

  KevinFitz wrote:

  The displayed report region is subordinate to the point P2_QUERY is NOT NULL. I guess that the region appears not is because the Action for the select list item is set to None, and so P2_QUERY is always NULL.

  No, the region does not appear because it is subordinated to the P2_QUERY being NOT NULL. This means that the region of report never exists on the page displayed in the browser, so it cannot be updated dynamically. (Dynamic updating is not to evaluate the conditions of the region, and she makes only the content of the report, not the whole region again).

  Remove the condition on the region to report, check the update works and then go back on what exactly are the requirements here. If you want to the area appear only when P2_QUERY has a value, and you want it to be regenerated without submitting and reposting of the page, the region must then be hidden rather than conditionally restored and shown via dynamic when action P2_QUERY Gets a value.

  I tried to add a further Action for the event real value DA but has been a mistake, as stated above,

  All irrelevant if Page to submit items on the region is used correctly.

• Write name of series in the chart to the report area

  I have a sample application created for my use and its accessible via the link

  https://Apex.Oracle.com/pls/Apex/f?p=78540:1:106638818610570:

  Username and password is apex_global / apex_global

  workspace: SHASAPEX

  I'm doing an exploration down to a region of the graph to a regional report and when I click on my bar diagram - I want to be able to pass the name label and the serial in my region to report (Variables) - so in my example - I'm hoping to spend say - JUL-14 and eligible Evergreen when click on the blue bar in the region of JUL - 14 , then through java for the link action script, I do an update of my region to report after you have defined the required hidden items

  But I don't know - how to pass the series name of my table for the report region - as of now, I have a javascript function to do a pop up of my values passed which shows JUL-14 and 2 when you click on my region example

  Thank you

  S

  Hi Jeff / Mihai,.

  Just thought to share my discoveries - has been able to make it work as I wanted (i, e - one query with several series of that) and then click for the series name to dig another report

  The reason why this is essential, what I need where I don't know how much of series I'm going to so I'll construct my SQL in a function and return to the region of APEX - this way atleast I would like to know which series is clicked, and I would have to factor the name of set of real criteria SQL into sql report child I did ,

  I updated my original with her test area if you want to take a look.

  Basically, we need to make a listener on the loading of the page that looks something like (Note: here in static chart region ID is RG1_EVGEXP_BAR)

  AnyChart.getChartById($("#RG1_EVGEXP_BAR_chart object").attr("id")).addEventListener("pointClick",function(e){
    console.log(e);
  showChartPopup(e);
  });
  

  And a separate java script which binds the name of the series and then update my report region is.

  function showChartPopup(pEvent){
  alert(pEvent.data.Name);
  alert(pEvent.data.Series.Name);
  clickEvgExpBar(pEvent.data.Name,pEvent.data.Series.Name);
  }
  
  function clickEvgExpBar(pLabel,pValue){
     $x('P1_R2_PERIOD').value = pLabel;
     $x('P1_R2_EVG_ELG').value = pValue;
     $('#R2_EVGEXP_CAT_DTLS').trigger('apexrefresh');
  }
  

• Record masters above / group report are repetitions on overflow page (s)

  I use 9.0.2.0.3 Builder to build a report from Above/Group of a relationship master / detail table. Each master record prints on a page, followed by its linked below details. When the secondary table contains more records will fit on the same page, the overflow of details on the next page. However, every time that happens the original masters record data are repeated on the overflow page, followed by the rest of the details records.
  
  Does anyone know how to remove this record master re-appearing on the overflow page? Any help would be much appreciated.
  
  This report generates a manifest for international shipping and customs officers do not really understand why the totals at the end of the manifest does not match the actual been worth printed on each page.

  Hello

  For all the fields of the master group on the 'walk' Print object - property "first page".

  If the fields are locked into a nonrepeating framework, you must set "Print object we '-'First page' property for the frame.

  Also, you must assign a vertical elasticity of all fields (and not extensible framework if it exists) to the variable.
  If it is not set to variable on the second page if there are the detail records, there will be a gap of exactly the same space the masters field.

  I hope this helps.

  Best regards

  Arif Khadas

• Subject domain changed after all the report are built? As soon as possible the necessary responses.

  Hi Sir, OBIEE,
  
  I've created more than 30 report, and now it is askin customer change the domain name of object in the presentation layer, when changed following error appears.
  
  * ' * Either you are not authorized to use the DOMAIN NAME of the SUBJECT area in the responses, the area in question do not exist.*. "
  
  Useful answer will be marked.
  
  Thank you.

  Go to the offline catalog manager and use search XML and replacement tool to replace the old domain name to the new domain name. This should solve your problem.

  Another method you can use is described in this forum post: Rename the model commercial and field

  Please award points if helpful/correct.

• List of selection in the report area. Everything is not in order...

  I want to have one item in a report from the region. The selected item in the list of selection of is the 'master' for records in the region. It worked very well, but after the removal of another region on the same page that the selection list is now displayed under the State rather than on the top of the report. I can't find a way to get back on top.
  
  In fact I can't find any attribute that determines what comes first in this situation. It is bad practice to use an item in a report region?

  Hello René,.

  What is the view point of your region? Try the configuration in "body of Page Template (3.» (éléments ci-dessus contenu région) ".

  Kind regards
  Dirk

• The fonts are pixalated. It is only in Firefox after I scrool to the bottom of a page. I used the clear Type, but it is only in Firefox 19

  Some letters are inserted in each word. If I highlight the sentence, he returns to normal. Or, if I scroll down and back, it's not bad yet. It's not on any word document or in the Internet Explorer browser.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Need help Urgent, a Site on the 2 areas, edge of animation works only for a single domain (not the domain clients)

  Hello

  need help with something really strange.

  I create a Restaurant website: www.arkadasch.de

  I test on my server the Site: www.bbaur.com/arkadasch

  As you can see I got the top of the page an element Ede animated.

  When I look at the site on my server www.bbaur.com/arkadasch, you see the element works correctly. You see on the two sites of the 'face' of the apearing name.

  I have download the site now the clients site and the edge of animation is showning only half? Only the name of the left site is apearing and not that of the right?

  I downloaded the same site two areas and it is always the same. My only he is on the right.

  I have delate my cache also.

  Someone has an idea?

  WOW-found the error.

  The name is written 'o'. and the psd file is named «Özden»

  I have change the name of "ozden" to "zden', delate the German symbol 'o'.

  Modify the edge of animation, save again, insert into Adobe Muse and now it works

• Lookup field to the report area - small problem

  Hello guys!
  
  I have a report and a search box that is used to find a specific report column. Only I could get it to work using an instring function. However, in fact it should be an exact match. So when you enter "9"only the folder with ID 9 must be displayed.»
  The instring function logically returns all rows that have a 9 match.
  
  My problem is that nothing should be filtered if my Page-Item used for the statement of the chain and the number of input search is null.
  
  Is there a way with sql to return all the rows when normal: P8_POINTSEARCH is null?
  
  {code} select *)
  Select
  p.inv_pt_id_main as ptidm,
  p.inv_pt_id_main as p_bestand,
  p.inv_pt_id_main as p_schichtigkeit,
  p.inv_pt_id_main as p_entwicklung,
  p.inv_pt_id_main as p_verjueng,
  p.inv_pt_id_main as p_totholz,
  p.inv_pt_id_main as p_biotop,
  p.inv_pt_id_main as p_alter,
  p.inv_pt_id_main as p_beeintraechtigung,
  p.inv_pt_id_main as p_verjueng_aussen,
  p.inv_pt_id_main as p_seltene_ba,
  p.inv_pt_id_main as p_punkt,
  l.str_lebensraumtyp,
  p.str_gebiet_main as str_gebiet,
  p.str_lrt_main as str_lrt,
  l.str_kurzform_lrt,
  p.int_inv_pt_nr_main as punktnummer,
  p.int_be_main as bewertungseinheit,
  p.int_wg as wuchsgebiet,
  decode (int_status_sub, 1,' < img src = "#WORKSPACE_IMAGES #neu.png" > ', 2,' < img src = "#WORKSPACE_IMAGES #bearbeitet.png" > ', 3,' < img src = "#WORKSPACE_IMAGES #fertig.png" > ', 4,' < img src = "#WORKSPACE_IMAGES #unbrauchbar.png" > ', 5,' < img src = "#WORKSPACE_IMAGES #unklar.png" > ",)
  6, "< img src =" #WORKSPACE_IMAGES #Keine_Auswertung.png "(>') like bild,"
  i.str_status
  vt_punktdaten_join p,
  vt_tbl_status I,.
  vt_tbl_lebensraumtyp l
  where
  (p.int_status_sub = i.cnt_status) and
  (p.str_lrt_main = l.str_kurzform_lrt)
  and (p.cnt_gebiet =: p8_cnt_gebiet)
  and nvl(p.bool_show,0)! = 1) where)
  InStr (upper ("PUNKTNUMMER"), upper (nvl (: P8_POINTSEARCH, "PUNKTNUMMER"))) > 0
  ) {code}
  
  Otherwise, I tried to implement the query in pl/sql.
  However, I get an ORA-06550 error when you try to compile the following pl/sql code. Miserably, I can't find the error.
  Maybe you have an idea?
  
  {code} declare q varchar2 (4000);
  Start
  q: = ' select *)
  Select
  p.inv_pt_id_main as ptidm,
  p.inv_pt_id_main as p_bestand,
  p.inv_pt_id_main as p_schichtigkeit,
  p.inv_pt_id_main as p_entwicklung,
  p.inv_pt_id_main as p_verjueng,
  p.inv_pt_id_main as p_totholz,
  p.inv_pt_id_main as p_biotop,
  p.inv_pt_id_main as p_alter,
  p.inv_pt_id_main as p_beeintraechtigung,
  p.inv_pt_id_main as p_verjueng_aussen,
  p.inv_pt_id_main as p_seltene_ba,
  p.inv_pt_id_main as p_punkt,
  l.str_lebensraumtyp,
  p.str_gebiet_main as str_gebiet,
  p.str_lrt_main as str_lrt,
  l.str_kurzform_lrt,
  p.int_inv_pt_nr_main as punktnummer,
  p.int_be_main as bewertungseinheit,
  p.int_wg as wuchsgebiet,
  Decode (int_status_sub, 1, "< img src =" #WORKSPACE_IMAGES #neu.png ">", 2"< img src =" #WORKSPACE_IMAGES #bearbeitet.png ">", 3, "< img src =" #WORKSPACE_IMAGES #fertig.png ">", 4"< img src =" #WORKSPACE_IMAGES #unbrauchbar.png ">", 5, "< img src =" #WORKSPACE_IMAGES #unklar.png ">",)
  6, "< img src =" #WORKSPACE_IMAGES #Keine_Auswertung.png ">") such as bild,.
  i.str_status
  vt_punktdaten_join p,
  vt_tbl_status I,.
  vt_tbl_lebensraumtyp l
  where
  (p.int_status_sub = i.cnt_status) and
  (p.str_lrt_main = l.str_kurzform_lrt)
  and (p.cnt_gebiet =: p8_cnt_gebiet)
  and nvl(p.bool_show,0)! = 1)
  ' ;
  
  If: P8_POINTSEARCH is not null then
  q: q = |' where Punktnummer =: P8_POINTSEARCH';
  Another null.
  end if;
  
  Return to q;
  end; {code}
  
  
  Thanks for your comments!
  
  Brgds,
  
  SEB
  
  Edited by: skahlert the 19.07.2010 06:32

  This should give you what you need:

  SELECT *
    FROM (SELECT p.inv_pt_id_main AS ptidm, p.inv_pt_id_main AS p_bestand,
                 p.inv_pt_id_main AS p_schichtigkeit,
                 p.inv_pt_id_main AS p_entwicklung,
                 p.inv_pt_id_main AS p_verjueng, p.inv_pt_id_main AS p_totholz,
                 p.inv_pt_id_main AS p_biotop, p.inv_pt_id_main AS p_alter,
                 p.inv_pt_id_main AS p_beeintraechtigung,
                 p.inv_pt_id_main AS p_verjueng_aussen,
                 p.inv_pt_id_main AS p_seltene_ba, p.inv_pt_id_main AS p_punkt,
                 l.str_lebensraumtyp, p.str_gebiet_main AS str_gebiet,
                 p.str_lrt_main AS str_lrt, l.str_kurzform_lrt,
                 p.int_inv_pt_nr_main AS punktnummer,
                 p.int_be_main AS bewertungseinheit, p.int_wg AS wuchsgebiet,
                 DECODE
                    (int_status_sub,
                     1, '',
                     2, '',
                     3, '',
                     4, '',
                     5, '',
                     6, ''
                    ) AS bild,
                 i.str_status
            FROM vt_punktdaten_join p, vt_tbl_status i, vt_tbl_lebensraumtyp l
           WHERE (p.int_status_sub = i.cnt_status)
             AND (p.str_lrt_main = l.str_kurzform_lrt)
             AND (p.cnt_gebiet = :p8_cnt_gebiet)
             AND NVL (p.bool_show, 0) != 1)
   WHERE UPPER ("PUNKTNUMMER") = UPPER (NVL (:p8_pointsearch, "PUNKTNUMMER"))
  

  It returns all the lines if you do not enter anything and will match your entry if: p8_pointsearch is not NULL.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• When you print documents from several web pages (HP) (Yahoo Finance), pages 2 to the front are different font than page 1. How can I make them all the same as page 1?

  I tried different configurations of Assembly page and different configurations of printer without result. Basically, the formatting on page 1 is not beyond this page when printing. It happens on all websites, so is not limited to Yahoo Finance.

  I've also updated for Firefox 7.0.1 and the situation persists.

  When you use the Safari browser, the problem occurs.

  I'm glad to hear it!

• Rows in the table are break on separate pages...

  I have 20 lines equipped table:

  first 3 lines are on one page, then half of the page is empty hen remaining 17 rows is on the second page.

  How can I keep table to break the lines. I want all rows in the table to succeed himself.

  Help, please. Thank you.

  Keep them with parameters are in the table > Format > Format line...

  

  Note: the first row on the second page may also have a start parameter that indicates that it is at the top of a page or column.

  The control of widows and orphans just specifies how many rows to keep together (widow is the first page; ( orphan , is the second page) when a table has over a page. The higher the number, the more lines are forced to remain together.

• HA/FT if the hosts are remote of 100 m (330 ft)

  I have 2 servers and they are about 100 m (330 ft) apart from each other.

  I need to set up FT for some virtual machines, and now I intend to buy a storage shared for guests.

  ISCSI with copper cables will do the trick or should I choose the solution of CF?

  Question goes both - storage area network and network FT.

  100 m is too long for FT work?

  CAT6 Gigabit speeds is evaluated for exactly that distance. Are your leads patch will lengthen?

  This is what your network can push more than a question of VMware. More than90 is generally regarded as requiring fibers, once you install hotfix leads.

• Closure of several tabs and do not receive a warning but the tabs are saved even if its only one tab, it was fine yesterday. Firefox 5 btw

  Yesterday it was working fine but what happened to idk

  Firefox 4 and later versions Save the previous session automatically, so it is no longer need for the dialog box asking if you want to save the current session.
  
  Use ' file > leave "or" Firefox > Exit "(Mac: ' Firefox > quit Firefox") If you want to restore multiple windows.
  
  You can use ' history > restore previous Session ' to get the previous session at any time.
  
  You may need to click the Firefox orange/gray button to see history.
  
  There is also a button 'Restore previous Session' on the default on: Home home page.