Had a BSOD

Similar Questions

• I had 3 BSOD relate to the windows kernel.

  Original title: BSOD (s)

  I had three BSOD on this installation of current w7 and all three of them are different.  According to bluescreenviewer, they relate to the windows kernel and a few others.

  (1) ntoskrnl.exe + 6f880 (03/09/2013)
  (2) fltmgr.sys + 323F (16/08/2013)
  (3) Win32k.sys + a4852 (22/07/2013)
  I run seatools since im using a drive hard seagate and it has passed all the tests achievable even a 6-hour test. There is no fragmentation on the hard drive.
  I also ran memtest86 for 6 hours and found no results.
  Also, I don't have Norton anti-virus. I have Avast running.
  My conclusion is faulty ram due to the error page file, but it could be a corrupted Windows file system. Given that the error spread both wise, it's hard to say its ram however.  Any help would be appreciated.
  Games also locked up for a while but that could easily be linked to the gpu, ram or hard drive.
  Photo included bluescreenviewer with the three listed.

  So far it seems SP1 and removal of third party AV software will do.  I'll post if happen again.

• Updates made, had a BSOD! Help!

  Here is the error I get.

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.0.6002.2.2.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode: d1

  BCP1: FFFFFA60012F5804

  BCP2: 0000000000000002

  BCP3: 0000000000000008

  BCP4: FFFFFA60012F5804

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini022710-04.dmp

  C:\Users\Jeremy\AppData\Local\Temp\WER-115191-0.SysData.XML

  C:\Users\Jeremy\AppData\Local\Temp\WER76A5.tmp.version.txt

  OK, so here's what I have improved.  I got a new motherboard ASUS P6X58D Premium LGA 1366, Intel Core i7 - 920 Bloomfield 2.66 GHz LGA 1366 CPU, OCZ Gold RAM 6 GB (3 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1600.

  My OS (Vista 64 Ultimate) was already on my hard drive from my old system, I just moved it into the new system.  I went on cases and power too, but I don't know if it's relevant.  Basically the only things from my old system that were recovered were my 2 ATI 4850HD vid cards and my hard drives.  Everything else is new.  I loaded all drivers of my motherboard, it was a bit of a PITA, but I did.  I was getting A LOT of BSODS in the beginning, but after that I loaded everything and did a registry clean it "seemed" he ran smooth.  It's always the same or similar message, the figures could change a bit, but it's the same fundamental mistake.  Any help is VERY appreciated.

  Jeremy

  N °

  Install the original operating system > then go to Vista.

  Contact your computer manufacturer and ask them to send a set of operating system recovery disk/s original.

  Normally, they do this for a cost of $ small.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer Vista will not start, the computer keeps restarting. Also had a BSOD "STOP: 0 x 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)" while trying to use reinstall OS Dell drive

  Original title: corrupted vista OS?

  My Dell studio slim desktop (Vista OS) that I have since Mar09 died on me 2 weeks back and I can't it start and it will keep rebooting until it resembles the wide long beep (as if a deceased person)

  Whenever my com has restarted, it shows the following:

  Safe mode

  Safe mode with networking

  Safe mode with command prompt

  Last known good configuration (Advanced)

  Start Windows normally

  All options will be led to the recovery of my com & return the same screen.

  It will always get stuck at the loading bar where the com starts boot & restarts itself.

  I tried to attach the hard drive to a different com as external hard drive, but it will begin to restart that com & hang the CMO as well

  I tried using the disc to reinstall OS from DELL and it will show a msg of error (blue screen) with the following text:

  Disable or uninstall the antivirus, Defrag disk or backup utilities. Check the configuration of the hard disk & check for any updated drivers.

  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  STOP: 0 X 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)

  NTFS.sys address 8CC143A1 base at 8CC06000, Datestamp 47918a 96

  Any idea of this situation?

  Is it possible to save my cause com have not all backups from my hard drive?

  Any help would be grateful.

  Thank you

  Hi Bill,

  I forgot to include some info as well... I replaced the 'touched' hardisk (Barracuda 500 GB) to an unused a (Barracuda 160 GB) and the problems disappeared. Whenever I change back the 500 GB in the com, the sound signal occurs only backwards the system continues the reopening for abt... 10 + times?

  "My Office studio slim (Vista OS) Dell I have since Mar09 died on me 2 weeks back and I can't it start, and he'll keep rebooting until it seems a beep long-lasting looks not (as if someone died).

  So the questions are now fixed, unless you put the other disk hard?

  Test the other hard drive.

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  And run the F12 as I advised you to do so.

  It is DELL's Diagnostics software.

  Good luck with it.

• Satellite L50 - A - 14 L - BSOD on Windows OS 10

  Hello

  I've recently updated my Toshoba Satellite L50 - A - 14 L according to the instructions on the site Web of Toshiba. After 10 days, I had a BSOD. I opened a post on Microsoft Community with the relative Minidump file and the result was that "Nvidia driver malfuction. My laptop is installed the Nvidia driver which is located on the site Web of Toshiba.
  Could you please help me?

  Thank you

  Could someone tell me please how to inform Toshiba support for this problem?

  If I decide to update NVIDIA driver, which one should I install?

• BSOD shutdowns and flakey firewire port - help?

  Well I'm getting really frustrated on this laptop, it's almost 2 weeks
  and I already had 2 BSOD the strange accident where the mouse moves, but nothing
  Otherwise, around, it works so a forced reboot was necessary.
  Today, I got a BSOD everything I did was run a few the taskbar called untility
  physician network or something.
  error message:

  PAGE_FAULT_IN_NONPAGED_AREA (no address information)
  STOP: 0 X 00000000050

  someone suggested that I may have a memory problem or my file is corrupted.
  in any case here is a run down on what I installed that day with my laptop.
  -Installed all XP security updates and patches
  -Installed Firefox 1.0.1 (do not trust IE6.0 yet)
  -Iriver (my mp3 player) installed Download Manager
  -Installed winamp 2.0 and Creative Cam Notebook.
  I ran a chkdsk forced start and no problems found.
  Another thing I found interesting was almost every time my laptop BSOD I usually
  find a yellow marker on my net adapter 1394 (firewire port) in device mananger
  ("cannot start device") don't know if that is related or not. A restart seems
  turn off this yellow marker, but I am rather unhappy that BSOD is none what laugh.

  My laptop model is the Equium A60-181 (Intel P4 HT 3.2 Ghz 512 MB RAM)

  Anyone else had problems or similar recommendations?

  see you soon,

  Richard S.

  Hi Richard

  I understand that you that you are unhappy with it all the problems, but there may be many reasons for this. In my opinion this can happen because of some useless day or some drivers installed by third-party software that you have installed on your laptop.

  Please reinstall OS using the recovery CD. After firs start check in Device Manager if there is some hardware problem. If not you than trying to start the free Config (doctor of connectivity) and a few other tools Toshiba to check if everything is ok.

  If everything is ok try to install SP2 if you n t have on your machine (just SP2 and not separately updates and patches). I don't know, but some of the A60 are delivered with SP2.

  Install all your programs slowly and carefully follow what happened after each step you did.

• Satellite A200 PSAE6E lights after BSOD

  Hello. (Sorry for my English)

  Last night I had the BSOD (driver_IRQ_NOT_LESS_OR_EQUAL). After memory dump that I restart laptop, but it doesn't.
  Starting the fan for 1-2 seconds, I hear some noise from the DVD player, led to power is blue, same as witness to power, seeing the battery cord is dark when the laptop is disconnected from the AC.

  Hello

  My laptop crashed and could not start because of problems with RAM.
  My modules of memory are dead for no apparent reason

  In my opinion the RAM modules need to be checked.
  Remove one and check both in each slot
  But it would be better to use the new modules.

  However, if the problem is not related to modules of RAM then it must be a serious problem of material possibly a motherboard or something like that

• Hello. I repeated the BSOD is since I've owned this computer. I'm tired of trial and error.

  Hello. I had repeated BSOD (Blue Screen of Death) since I've owned this computer.

  Product: HP TouchSmart 300-1017 PC Desktop

  Product # NY604AA-ABA; [Personal information]

  W7/64.

  "DRIVER_POWER_STATE_FAILURE.

  My last HP support ticket number is 805 154 7061.

  These BSOD occur only when the machine is in

  STANDBY or hibernation,

  NEVER when it is active. NEVER.

  I called support 5 - 6 times and spent hours trying to get the problem solved.

  They took control and made things such as the update of the BIOS, the DL updates, etc., but the problem persists. Then on a reminder 24 hours later, they ask if everything is OK.

  WELL, WHAT * IS * OK UNTIL THE NEXT BSOD.

  These efforts have NO analysis as to what could be the cause of the problem.

  I'm tired of trial and error approaches, involving mainly conjecture.

  I have right to more effort has been to resolve this problem.

  Information about the BSOD settings on the causes of the problem are listed below.

  The code is always "Stop 0x0000009F.» Track dump parameters:

  ==============================================

  Dump file
  050711-19000 - 01.dmp

  Time of the accident
  07/05/2011 09:47:02

  Bug control chain
  DRIVER_POWER_STATE_FAILURE

  Bug check code
  0x0000009F

  Parameter 1
  00000000'00000003

  Parameter 2
  fffffa80'05c0ca00

  Parameter 3
  fffff800'00ba2748

  Parameter 4
  fffffa80'04472180

  Caused by the driver
  Ntoskrnl.exe

  Caused by address
  Ntoskrnl.exe + 80640

  Description of the file
  NT kernel & system

  Name of the product
  Microsoft® Windows® operating system

  Company
  Microsoft Corporation

  Version of the file
  6.1.7601.17592 (win7sp1_gdr.110408 - 1631)

  Processor
  x 64

  Full path
  C:\Windows\minidump\050711-19000-01.dmp

  ==============================================

  This requires an ANALYST determine the CAUSE of this recurring problem.

  There may be a solution to the MS Support Article ID: 977186 - "error message when you try to resume a Windows 7-based or Windows Server 2008 R2 computer for.

  "hibernation:" Stop 0x0000009F "

  He said: "to resolve this problem immediately, contact Microsoft Customer Support Services to obtain the fix. For a complete list of the Support Services client Microsoft

  phone numbers and information on the costs involved, see the Microsoft Web site at the following address:
  http://support.Microsoft.com/contactus/?WS=support (http://support.microsoft.com/contactus/?ws=support).

  I think that MS wants to charge a person for download. But I think any charges should be covered by HP, under my support contract.

  I want a permanent solution so that I can keep from losing my job.

  Tom Jones, Burbank, CA

  Ox9F errors are pilot errors.   Often they are solved by updating the graphics driver, but it could be any driver.  Sometimes something wrong in the system can cause a problem to another driver - they can be very difficult to solve.

  I saw a document on the Microsoft Web site that may apply - I might try what it says and see if that makes a difference.   http://support.Microsoft.com/kb/982091

  Also - make sure that you have updated the graphics and TV tuner driver (and everything that needs to be updated) - there were a few difficulties for crashes and blue screens in some of them.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=da&sw_lang=&product=4007366#n142

  -DM (an employee of HP long)

• I get BSOD, Multiple_IRP_REQUESTS_COMPLETE and sometimes SQL_NOT_LESS_OR_EQUAL all the time randomly.

  I recently got new hardware,
  Radeon HD 6950 video card
  Corsair Dominator GT DDR3 4 GB to PC15000
  MSI P67A-GD65 Motherboard
  Intel i5 processor

  I installed everything on the disk, but when I went into my browser I instantly BSOD Multiple_IRP_REQUESTS_COMPLETE
  This has happened every time that I went on my browser, sometimes instantly, or up to 10 minutes
  Then I reinstalled my Internet Explorer browser(Firefox) and soon the IE BSOD

  A friend thought that maybe it was Ram related so I did a bios memory test and it worked perfectly
  then he told me to download the minidumps via xfire
  There was something in .sys associated with Daemon tools, so I uninstalled and deleted the .sys file
  It worked for maybe 2 hours until I had another BSOD
  So I decided to just play games (Bad Company 2) until I could get my friend on the computer again, I didn't have a problem with that, up to this that may have been 2 hours
  past and I got the BSOD in SQL_NOT_LESS_OR_EQUAL. I kept getting that at random times playing it.

  The friend finally got online and I gave him the minidumps, and he said that befcm3xp was in the files... Well, which is linked to my modem so I got rid of this file and got him a new file
  At this point the BSOD became less frequent, and after I got the new file I did not get an another BSOD until perhaps 7hours had passed, it was an another SQL_NOT_LESS_OR_EQUAL

  Today, I looked at the internet and got an another Multiple_IRP_REQUESTS_COMPLETE
  so I told my friend I was going to just to get a few mindumps more so he can review and it was an another two SQL_NOT_LESS_OR_EQUAL
  before I gave it to him, he said it is still associated with BEFCM3XP

  I have no idea what to do now
  Here is a link to all my minidumps
  http://www.mediafire.com/?yy1p177kicsrc1p

  Hello

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  Start - type in the box search-> auditor/Reset hit enter to disable

  ====================================

  References to Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (look for updates to the BIOS and the driver).

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
  a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For Vista/Windows 7 memory diagnostics tool

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
  Tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• T410 nvlddmkm.sys BSOD on startup

  Hi all

  I had my T410 since the end of last month and had a BSOD on startup several times so far. Whenever I caught, I noticed that the driver nvlddmkm.sys nvidia was the cause. Each time the BSOD, I get the prompt "windows did not start successfully", how by selecting "Start windows normally" translates the fine start System. Since this BSOD is only presented to a cold start, I'm not too hampered by it outside my boot up times by doubling the time it does. I ran the update of the bios/driver Thinkvantage, as well as I'm running with the latest updates for Win7 Pro x 64.

  Everyone knows this? If so, have you found a solution? No matter what Lenovo personal support out there have an entry?

  Thank you

  TSalinas

  
  

• Sudden BSoD. Kernel Power event 41 task 63. And other questions...

  While many may be called from a previous thread, I have made, my monitor that's happened wobbly with will power during the boot. I have not solved this issue, by the by, but think it's time for a new monitor.

  However, today when I went to go do something else while leaving the start the computer to the top, I came back and (while the screen was still ongoing and disable this monitor because), I noticed he had a BSoD. I couldn't read anything on this screen because of the screen, so I restarted the computer (what makes the monitor stop acting in place). Entered the event viewer and had found it to be an event 41 task 63. Whatever it may be. So that's what I see in the critical error XML view:

  -

  -

   

    41

    2

    1

    63

    0

    0 x 8000000000000002

   

    153812

   

   

    System

    Xenomic

   

   

  -

    0

    0 x 0

    0 x 0

    0 x 0

    0 x 0

    fake

    0

   

   

  I don't know what it means at all, but what I'm collecting, event 41 is related to the PSU? But if it is the power supply, what block of POWER of the MONITOR (which I guess would be the problem as the monitor was going to power he has) or power supply of the current COMPUTER (which I really hope is not the case)? Or is it something else entirely?

  In addition to all this, I noticed that everytime I start the computer and run Core Temp to check the temperature, I often find it starts at about 50-60 degrees and rest around there until some good long minutes (about 20-40 minutes) before it comes down to temperatures that are easier to manage (30-40 degrees). I guess that's just the Tower need ventilated, but that would be linked to the sudden BSoD on boot to the top?

  Hello

  Thanks for posting your query in Microsoft Community.

  The problem may be caused for various reasons and to diagnose the problem, we can try the following methods and check.

  Method 1: Start the computer Safe Mode and check if the problem persists. If the problem does not persist in safemode, turn on your computer in a clean boot state and check.

  Step 1: Start the computer in Safe Mode

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. The words Safe Mode appear in the corners of your monitor to identify which Windows mode you are using.

  Please refer to: start your computer in safe mode

  Step 2: Perform a clean boot in order to avoid any conflict of third party software.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Please refer to the article below and try the advice given to solve the problem.

  Resolve stop (blue screen) error in Windows 7

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• RDP hosts BSOD - Code SYSTEM_SERVICE_EXCEPTION: 0x0000003b

  Original title: RDP hosts BSOD

  We recently took 10 desktop computers that employees used in a branch at Headquarters and set them to remote desktop for the employees of the branch can have faster access to the resources of main office.

  Three of the new RDP to the headquarters hosts suffered a BSOD event. They are all:

  Chain: SYSTEM_SERVICE_EXCEPTION
  Code: 0x0000003b
  P1:00000000'c0000005
  Pilot: win32k.sys

  Each computer has undergone at least one of these since moved BSOD (one had 3, the most recent being yesterday) and never had a BSOD before moving.

  I made sure they are updated, sfc/scannow and antivirus scans have been done and revealed no problems.

  One of them was installed KB2939180 to respond to a question of freezing and had his first BSOD a few days later (in some cases that KB is used to solve this problem).

  In troubleshooting, I applied this patch: https://support.microsoft.com/en-us/kb/2525246

  From the application, machine a BSOD was again with exactly the same discharge.

  I fight on a path to go down.

  Before the move, those workstations had never BSOD had and were quite stable.

  They are all Lenovos (different models, different years of manufacturing), using cards Quadro and Windows 7 Ultimate edition.

  Hosted at Spiceworks dump results: http://static.spiceworks.com/attachments/post/0017/0233/BSOD.txt

  This issue is beyond the scope of this site which is for the consumer to related issues.
  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL (ndis.sys)

  Hello Microsoft community.

  Yesterday I installed Oracle VM and used for a short stint with no problem or what so ever, and all of a sudden today when my computer starts, I had this BSOD

  

  I have L17 no idea on what to do to solve this problem!

  Help: x

  They are related to your athrx.sys driver (atheros)

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Impact of the BSOD

  I recently had a BSOD with the following technical information:

  BUGCODE_CODE_DRIVER

  0x000000FE (0 x 0x000000000000000A, 0 x 0000000000000008, 0000000000000006, 0xFFFFFA8006036640)

  Don't know what that means. Can someone help, please?

  Audrey

  Have you installed a new hardware or software since you started facing this problem?

  You can try to perform a restore of the system before you start, facing this problem.

  How to use in Windows 7 system restore [easy, 5-10 Min]

• BSOD: 0 x 00000044 (Windows 7 SP1 x 64 Pro)

  Hello

  I had two BSOD today resulting with the same code 0 x 00000044. One was while I was playing the Sims 4 and have Firefox open.

  The second right after, when I started firefox.

  Here's the minidump: https://db.tt/AfAHg4tF (link dropbox)

  Thank you in advance!

  CA

  This isn't a final reading.  I would like to run it again.  If this is not a fall in the first pass of 6-7 is not bad.  If so, it could be either ram or the motherboard.