had a problem w hile that burn CDs in my Media Player

Similar Questions

• Can't burn CDs with Windows Media Player

  Hello

  I have problems with CD burning on my computer satellite phone. Had the laptop for a few months and have had no problems. However only found an extra software with the DVD drivers CD so downloaded it - big mistake!

  I had to restore in settings a few weeks that I could not delete the programs. That s all is well now, but since I was unable to burn CDs in Windows Media Player. I click on "burn" and nothing happens, and the right side says CD has nothing on the subject (it s a blank CD).
  All tried and checked my settings, etc, can't think of what it could be.

  Does anyone have any suggestions? I would be grateful for any help.
  Thank you

  Hello

  I guess that's because other applications have disabled the function of registration of Windows operating system.
  Go into the my computer and right click on the CD/DVD drive. Here, please select the properties.
  Click the recording tab and enable the option enable the writing of CD on this drive

• Problem: Burning CDs with Windows Media Player

  I'm having a problem with burning to a blank CD using Windows Media Player.  The songs that won't burn have a red "X" next to them and details of the mistake of saying "this file cannot be burned to a CD, because it is not on your computer."  I looked at the location of the file, and it is located on a web address.  I would really appreciate any advice you have to offer on how to solve this problem.  Thank you.

  The files must be downloaded to your hard drive.  Windows Media Player cannot burn files on the internet.  Are these songs to a music streaming service?  If so, they must be purchased before burning.

• text to burn cds on windows media player

  I would like to know if it is possible to add text (the album title, artist name, song title) in the CDs that I burn on Windows Media Player.

  Hi FreddieHayes,

  Windows Media Player does not burn audio CD, CD text, and it doesn't have the plug-ins Windows Media Player from Microsoft which will be added to this support.  There are many applications that make the third party CD burning. Moreover, if the CD supports playback of WMA or MP3, you can use Windows Media Player to burn your CD with more songs by CD and all track information.

  However, there are third-party applications that will enable this feature. You can check on the internet for plugins like these.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can also check the links:

  Add items to the Windows Media Player library

  Add or edit media information in Windows Media Player

  Add or change album art in Windows Media Player

  Hope this information is useful.

• Unable to play the song or burning CDs in windows media player 11 error message: "Windows Media Player cannot find the file.

  Original title: the windows media player 11

  I have the media player 11 and my operating system is XP Home Edition, but for some reason, when I try to play a song or burn it to a CD, this is the error message I get.  Can someone help me with this?

  Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. reason for which each song I ever download from the internet is going to play is no longer...

  Thank you.

  Hi NancyCamper,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• Impossible to burn CDs with Windows Media Player

  Media Player

  I can burn CDs, it will say that I have the cd durty or I donth have my burner workin but I can burn in media center always shows that I have the full cd when is a new thank you

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Center

  Burn a CD or DVD in Windows Media Center

  You can burn different types of CDs and DVDs in Windows Media Center. This allows you to decide what type of DVD or CD you want to create, based on the way and you want to use to read the content after it is burned to a disc.

  And read the links there, too.

  See you soon.

  Mick Murphy - Microsoft partner

• Burning CDs with Windows Media Player in Windows 7. "Error: connect a burner and restart the player.

  Original title: CD burning with Windows Media Player in Windows 7

  When I try to burn an audio CD with Windows Media Player, I get the message "connect a burner and restart the player.

  I am able to burn audio CDs using ITunes, so I don't think that my CD/DVD burner is defective.

  Thanks for your help.  The "fix it" has not worked, but I checked the settings of my Nero 8, Nero Toolkit, Nero Burn Rights program, and he was the one who said "everyone has burn rights" or "nobody burn rights.  When I changed the option to "everyone", everything started to work properly.

• I had my computer going on 2 years never had any problems until I try to play my Windows media player and it say validation and he said that counterfeiting please help

  I have windows xp edition sp3 media 11 family

  There is a Microsoft Forum dedicated to problems with Genuine Advantage.

  I suggest you post in the Windows XP Genuine Advantage Validation Issues link below.

  http://social.Microsoft.com/forums/en-us/genuinewindowsxp/threads

  They would be better able to solve your problem.

  Thank you

  Marilyn

• Impossible to burn CDs in Windows Media Player 7

  I can not burn CD more. It just stopped burning. Some of the music I want to burn also has a red x on it. I don't know what is happening.

  I just stopped and bought Memorex CD - R and it started working. Maybe he just will not take Maxell more. That's what I had always used. Maybe this will help. Thanks for the reply.

• Too high bass after burning CDs with Windows Media Player 12

  When burning the CD on WMP the bass is medium to high.  I noticed happens that on some CD burning, but the amplification of the bass is very noticeable.  Even if I turn down the bass on my player it still sounds weird.  There is a sort of change in equalization going on during the burning process.  When this happens on a CD, it affects ALL the songs on it. Then I will burn another mix CD and the same exact song will not have the bass amplification.  Is it possible to prevent this?  It might have something to do with the characteristic sound of leveling?  Or maybe the burning speed?

  I record on CD - R discs.  It does not do anything on MP3 or Audio on the disc, just CD - R.  I noticed this on my car player CD system.

  Audio/mp3 is how to actually burn the disc... Audio discs are similar to a cd... upto 80 minutes in length classical music, but many modern readers will also play cds that have MP3s on them.

  If you want to re - rip to wma lossless format just make sure that you copy protect them. (under settings "rip music" in the options of wmp)... come back to me, if you need more advice. Best - R.

• What burning CDs in Windows Media music system prepares all the files listed.

  What burning CDs in Windows Media music system prepares all the files listed.  When the system starts writing the files on the disc it gets through about 4 songs and then goes to finalize the disc and ejects the disc.  The disk does not appear to have anything on it.  Can I do anything locally to solve the problem?

  My system is XP.

  I burned the disc a lot in the past

  There has been no major changes to the system

  The files I am to burn to the disc are previously ripped files on the disk hard, some of them were burned on another drive before.

  I tried to slow down the burn speed, but that did not work.

  CD burning problem

  Hello

  • You receive an error message when burning CDs?
  • What were the changes made before the issue started?
  To resolve this problem, do one or more of the following and then try again:

  a. Verify that the CD burner is properly connected.

  b. clean the disc and verify that it is not damaged.

  c. try a different brand of blank discs.

  d. If another program is currently burning files on the CD, wait until the burning process is completed.

  e. Quit other programs that may be using the CD burner.

  f. restart Windows Media Player.

  g. restart your computer.

  h. use the Windows error-checking tool to find system errors of files with bad sectors on your hard drive. For more information about the error-checking tool, see Windows Help and Support.

  You can check: http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C00D10DA&contextid=30&originalid=C00D0019

• Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

  I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

  Hi N2tjq,

  Are a. When you facing this problem?

  B. is - what happens with all DVDs?

  C. recent changes made on the computer?

  I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

  Choose a speed slower burn to your DVD recorder as follows:

  1 back to adding photos and video to the DVD page and then click on Options.
  2. in the DVD burner speed box, select medium or slow.
   
  Change-Windows-DVD-Maker-DVD-Video-settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  If the problem persists, download the service pack 2 for windows vista on the computer
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791

  See the link below:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
  http://support.Microsoft.com/kb/949281 
   
  For more information, please see the links below:

  Burn a DVD video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  If you use windows media player, see the link below:
  Burn-a-CD-or-DVD-in-Windows-Media-Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
   
  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Currupted Burn installation in Windows Media Player. Error a critical process of Windows Media Center has failed.

  Original title: Currupted Burn installation in Windows Media Player for Vista Home laptop

  Currupted Burn installation in Windows Media Player for Vista Home laptop.  My registration cripting of Window Media Player and streaming facilities have been corrupt, but have been corrected, but I can't burn CD/DVDs.  The appearance of the message tells me "a critical Windows Media Center process has not, can someone please help me with this problem.

  Thank you for your help, the problem has been resolved.  Much apprecited.

• When I try to add music to the video that I created on Windows Media Player, it says file not found... It is clearly there... I downloaded it from i tunes... advice?

  I am trying to add music to video, that I created on Windows Media Player... When I select the song in my Itunes list it says file not found.  Don't know why he is here... somewhere!  Any tips?

  Because Windows Media Player cannot create videos I have
  assume that you are talking about Windows Movie Maker.

  Try to browse to your music folder and see if you can
  Add a music file to your project. If you have problems
  You may need to convert the music file to the. WMA
  format before importing.

• I have a problem with the active WiFi Seagate GoFlex TV Media Player asking for a net user ID and a password.

  Original title: Net User ID & Net password

  After the upgrade from Vista to W7-64 CV, I have a problem with an active WiFi Seagate GoFlex TV Media Player asking for a "Net User ID & Net password" to log.  I used all imaginable combinations of IDs & passwords, but they all lead to logon fails. I'm almost certain that it is a W7 security problem because others with the same players who went to W7 face the same problem.  I found many supposed fixes online, but none works.

  I am aware that MS W7 works as it should and Seagate is not their problem, but if anyone can recommend a change of security to help this issue, I guarantee a pass towards the sky.

  PS: All the sharing, etc. continuously.  are installed as they should be.

  The only reference to Net User ID and password I can find is on page 46/47 of the User Guide. If this is not the user name and password of the Windows account that you want to share files with, I don't know what it is.

  I guess patches that you tried to include those that are mentioned here:

  http://forums.Seagate.com/T5/FreeAgent-theater-and-GoFlexTV/logon-fail-home-network-Windows-7/TD-p/70540

  I would have suggested the registry change.

  It might be worth checking that you have the latest firmware, just in case.

  http://knowledge.Seagate.com/articles/en_US/FAQ/216931en?language=en_US