Had to install new HARD drive & restore to factory presets. Now in update Win XP & it won't work?

Similar Questions

• I just put in a new hard drive in my computer and now my sd card reader slot does not work. How can I get my computer to read the SD card?

  Computer crashed

  New hard drive in my HP laptop

  Computer is not reading my SD card

  Hello

  Make sure the SD card works on other computers.

  The card reader is a USB device to ensure that other USB devices work.

  Check with HP, their drivers support and documentation online and ask in the forums of HP where it
  others will be with the same or similar model. I hope this is just the driver. It is possible that the device has been
  back not connected properly or even damaged when installing the new hard drive.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Just installed new hard drive 1 TB

  Just installed new hard drive 1 to and vista only reads only 127 GB. How can I get vista to recognize the full 1 TB

  http://www.vista4beginners.com/how-to-manage-your-disks-using-only-Windows-Vista-disk-management-tool

  Take a look in disk management.

  See you soon. Mick Murphy - Microsoft partner

• I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.

  Download the CS5 products

• New hard drive; Restore System Image taken of the SAME computer Windows7: (RE-) ACTIVATION

  Daughter bought TWO IDENTICAL Windows7 Home, laptops Dell Inspiron, EACH WITH ITS OWN PRODUCT KEY. Was given a laptop to MOM as a gift. MOM's hard drive died later. Bought and installed a new hard drive with the same features in MOM's laptop. Used a picture of daughter portable computer system to restore Windows7 Home for MOM's laptop. Everything works perfectly. NOW WE WANT TO (RE) ACTIVATE Windows7 MOM home.

  I guess that (RE-) ACTIVATION must be done.

  QUESTION: Is it easier to enter the original product key to MOM which is a clone of Windows7 girl on MOM's cell phone, then do a normal activation?

  Thanks for your help.

  (While I have your attention, can you remind me what the path is to get to the place where I get the product key?) (Thank you.)

  Problem solved. Thank you.

  It was easy. When I went into the system on MOM's laptop he already said: "Windows is activated".

  Another question arises: the product key he showed, that must have been imported with the Image of the system taken mobile identical to daughter, had "OEM" in the middle of it. Does this mean that the product keys, use two laptops are actually some generic, common Dell product keys and NOT the product keys shown on the bottom of the respective laptops?

  A kind of activation of convenience for Dell customers?

  Thank you, again, for your help.

• Satellite Pro A120 - Jerky empty reading after installing new HARD drive

  Just installed a new hard drive in my Satellite Pro A120. Made a full new install Vista, installed all the drivers but video playback is choppy/jerky. Even google earth is juddery. It didn't use to be like this with the original hard drive.

  A I had a problem of driver somewhere? I think it's the 945 chipset.

  Hey Buddy,

  To be honest, it's really hard for us, users, to say what causes this problem and I think you should test more yourself

  Anyway, you have reinstalled Windows using the Toshiba Recovery disk?
  You should also check if all Windows updates are installed and if you have yellow exclamation points in Device Manager.
  For any use of video and multimedia substance High Performance plan wrote BobRock_1.

  Sorry, but I think that it s all we can say :(

• HP Probook 4520 s installed new hard drive with Windows 7 pro x 64 and drivers - very lag

  Hello

  I had my HP Probook 4520 s for 5 years and a few months ago, he started to become very lag, especially when you use the internet, streaming video and games.

  I thought I had identified the problem as a bad sector on the hard drive and so I bought a new hard drive and upgraded the RAM from 4 GB to 8 GB at the same time.

  When I installed the new hard drive, I couldn't burn an image of my old hard drive (it would stop during the process and was unable to do so because of an error). I used my little HP Windows 7 Pro x 64 operating system DVD and your HP Application and Driver Recovery DVD to install the necessary drivers on my replacement new drive.

  The RAM and the new hard drive seem to be good, however, it's more lag. I tried to use latancy monitors to see if the drivers are the issue. It seems that there is a huge amount of latancy and my CPU is at an almost constant usuage of 100%.

  LatancyMon points in the following drivers: usbport.sys, tcip.sys, acpi.sys, iastor.sys, ndis.sys, dxgkrnl.sys and so on.

  I've seen forums where they will guide you step by step how to determine what drivers are causing latancy. This I could do although he always seems to change drivers who are the cause of the problem and there seems to be a lot of pilots of causing this problem it is so difficult to bring out here that one. In addition, there seems to be no solution to these problems. The only one offered is to update the offending drivers. This does not solve the problem with lag and the latancy yet.

  Any ideas?

  P.s. I really don't know not what is the underlying issue is here so I don't know if this is the right forum to post in. Drivers may not at all be the issue, I spent the last four weeks trying to solve this problem.

  Hello skinandbones13

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• No input signal after installing new hard drive

  SUP guys, im need help, my hard drive on my computer has stopped working, I'd get an important flasher hits and it looks like it please insert a disk and when I did a diagnosis, I had hard drive errors I went and bought a new one.

  In order to take the old one out I had to remove the cables from the hard drive, the big white thing that plugs into the motherboard, the processor fan and cable.

  I put in new hard drive, put everything back as it should and when I boot it all im getting are no signal input on my screen, I have tried on 3 different screens and got the same thing.

  Here are some pictures of the inside of my computer:

  

  

  

  If you notice the VGA thing on the 2nd picture, should no more added to it? I mean in addition to plug the cable from the monitor, I have the impression that there should be something added to the back of it, I just noticed now, the computer and the screen worked perfectly before.

  It's a HP model number is a6655f, it came with vista, but after putting in the new HD, I intend to put windows 7, I have a copy of it.

  I guess with the new hard drive and I am I was right assuming that you have already installed windows 7

  Sounds like you need drivers for the drive, and sounds like a simple problem, download drivers and install I believe that when you install windows 7, it offers you the possibility of drivers installed.

  Oh and you could try to change SATA to IDE in the BIOS and see if that helps

• XPS 8300: Install new hard drive 3 TB BSOD results after imaging but not after Win7 clean

  I have a XPS 8300 and the original Seagate 2 TB hard drive is dead. Because being forced to install a new HARD drive, I opted for 3 TB and bought a WD because I had horrible luck with Seagate repeatedly.

  Anyway, I installed the new HARD drive and booted from the Windows 7 64 bit Pro installation disc and attached my external drive to backup and choose the backup image to the new disk. It completed without error, but when the computer restarts, I get a blue screen of death with the 7B stop code. I tried to put the HARD drive in a box and attached to another computer, and all my image files are there so I know that the computer was able to write the image to the new HARD disk. How to fix the BSOD errors? I set to update to the latest version of the BIOS (A06) but always the blue screen. I tried to install the latest Intel drivers also and which does not seem to do anything.

  Frustrated, I installed Windows 7 clean on this drive and I am writing this message from him. The drive appears in my computer as a 2 TB. Disk Management displays 100 MB System Reserved Partition, Partition C: of 2047 GB and 746 GB unallocated.

  Why a new installation does not seem to work (I know that I would have to format the 746 GB to use it and to give it a new drive letter) but the imagery that the disc breaks down. What Miss me?

  I've seen a lot of posts on using Intel drivers to solve similar problems. These drivers get breaths during the imaging process? Should they be installed before the imagery of the backup? (Thought that I did, but maybe I didn't do it right - their installation can be verified before the disk imaging?) Tried to call Dell and Windows support... am no where in a hurry.

  Hi LG1382,

  You cannot start Windows 7 on a 3 TB drive. You can use it for data, but not as the system drive. Windows 7 can only start TPG on systems with BIOS UEFI, which does not the 8300.

• Installed new hard drive

  Hello, I have just installed a new hard drive on my toshiba p755 and did a full system restore.  However, I can't work or any sound out of my laptop speakers.  I checked the control panel and it said everything was working properly and drivers are up to date.  The "speaker icon" shows that sound is produced but again once I have nothing come out of the speakers.  If someone could help I would appreciate it, thank you...

  Hello, I have just installed a new hard drive on my toshiba p755 and did a full system restore.  However, I can't work or any sound out of my laptop speakers.  I checked the control panel and it said everything was working properly and drivers are up to date.  The "speaker icon" shows that sound is produced but again once I have nothing come out of the speakers.  If someone could help I would appreciate it, thank you...

  ===================================
  The following article might be worth a visit:
  Open the drop on the right window and select your operating system.

  Windows 7 - no sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (valid for XP - Vista - 7-8 - RT)

• Catalogue lack of LR 5.7.1 after installing new hard drive

  A few days ago I was forced to install a new hard drive on my computer because of problems. I have re-downloaded all of my programs which included Lightroom. I had a disc for Lightroom 3 and then had updated to LR 5.7.1 online. I used a link to Adobe for re - download 5.7.1.  I have an Acer running Windows 7 Home Premium 64-bit.

  Now I have 2 major problems.  There are a total of 139 images in my catalog that I guess are the catalog in LR3. They appear when I click the icon in the grid. I got about 4000 processed images so why don't others appear under all the photographs?

  The way I work is to download my camera pictures in folders on my hard drive which is now renamed F drive.  Then I pass to the ones I deal with in Lightroom. Which causes probably my second problem. When I click on set to the point that one of these images to 139, the file is not found.

  How do I find the catalog for the rest of the 4000 images and how to 'find' the images first 139?

  Thank you.

  These photos are considered to be 'missing' by Lightroom... I can say because it is an icon of exclamation point on each of the photos in the Filmstrip at the bottom. You must reconnect the photos in Lightroom by pointing to the actual location on the hard disk of this photo, or alternatively, you can log records both.

  This document explains and illustrates how to do this.

  Adobe Lightroom - find moved or missing folders and files

• Problems opening Captivate 7 for Mac after installing new hard drive

  Hello!

  My HDD recently crashed and I need to install a new hard drive (OS x El Capitan, version 10.11.13) on my mac. They re-installed Adobe Captivate (I use Adobe Captivate 7 for Mac), but now the software and files that I created using the software will not open. Initially, I received an error message stating that I had to install a new version of Java, but even after I did it, it will still not open. I click on the link in the finder and it bounces on the taskbar at the bottom for one second, then disappears. I tried to restart the computer, but it does not help.

  Can anyone help? I need it immediately for work!

  Thank you, Ashley

  I suspect that the reason is the operating system. Even the Captivate 8 was not compatible with El Capitan, I doubt that is the case with CP7. Only CP9 is compatible with El Capitan.

• Install new HARD drive in a PC 2100

  If anyone can help, I bought a second hand Toshiba SP2100(Model no.:PS210E-0069-5M) with a TravelStar 20 GB HDD. I bought a Toshiba MK4025GAS 40 GB of HARD drive to replace the 20 GB HARD drive, but when I install it, it is not recognized in the BIOS. I connected the new HARD drive to my PC via a USB cable to the IDE and the disc is recognized. Any ideas.

  Hello

  Well, it's not easy to say why the HARD drive may not be recognized.
  I think because of the size of the HARD drive. But that's my own opinion. Have you tried to update the BIOS? Please see the Toshiba for the right BIOS download page. But beware because the incorrect BIOS procedure may damage the motherboard.

  Good bye

• How to install new hard drive

  I was wondering if there is a document that tells me how to install a new hard drive. I have a desktop Pavilion a6512p and was able to make recovery disks.

  I don't know much about computers and was hoping to find a guide step by step on how to do it.

  Thank you

  Install a new hard drive:

  HP and Compaq Desktop PCs - adding or replacing a hard drive (c01700809)

  This document relates only to HP desktop with the following computer case. (Your case may be slightly different).

  Image of the front and sides of the computer

  Before you start

  • Turn off the computer, disconnect all cables and transfer the computer on a clear work area, flat and stable on a floor of these.

• Bluetooth driver after installing new hard drive

  Hello:

  RE: HP Pavilion DV7 - 4270us Windows 7 64-bit

  Two weeks ago, I replaced the internal hard disk on the above referenced pc. I added slowly back the necessary drivers and software using a large HP Expert.

  (Note: I have create recovery discs when the pc was new, but for some reason, they would not install new hard disk.) This is the reason why I'm adding drivers and software available, one at a time.)

  3 questions please:

  (1) because my pc's bluetooth, I don't remember adding a bluetooth driver. How could I know?

  (2) Lightscribe software has been installed at the factory on my pc, but I have not just now. Is it possible to get that back?

  (3) reviewed the upgrade from Windows 7 to Windows 8.1, but was afraid that I wouldn't be able to find the drivers for my pc if I have upgraded. In addition, read on the forum, it seems to be quite a number of issues upgrading from Windows 7 to Windows 8. 1. What are your thoughts?

  Thank you for your help and suggestions.

  For the Bluetooth drivers:

  If you need drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

  Here is the link to the lightscribe software:

  http://download.LightScribe.com/LS/LS_Update_1.18.27.10_.exe

  Regarding Windows 8.1:

  If you are running Windows 7, you can use Windows 8.1 Upgrade Assistant to check if your programs and devices are compatible with Windows 8.1.