New hard drive; Restore System Image taken of the SAME computer Windows7: (RE-) ACTIVATION

Similar Questions

• New hard drive, cannot connect to PES on the second computer

  I use Photoshop elements 13 on an iMac at work and also installed on my computer at home when I'm not at home. My work iMac hard drive crashed and another was installed. Now my computer won't let me open PSE because he thinks that I installed it on three computers. I don't know what to do because Adobe doesn't seem to have a contact number for previous versions of the EP and suggests only go to discussions of community support assistance.

  so... Help!

  Please click on the following link to access to Chat support: Contact customer service

  *Remember to stay signed with your Adobe ID ( email id used to buy the product ) before accessing the link above*.

  Select the exact options indicated below in the capture to get support of screen options:

  

  Let us know if that helps.

• I got a new hard drive installed in my laptop. The difficulty to reconnect my printer.

  Recently, my computer crashed and I had to have a new hard drive installed.  When she came back to me I found that my printer to be connected to my laptop.  I tried to use the disc that I used when I purchased the printer.  But now, with this new hard drive, I need to connect to the printer to my laptop once again, and I have a problem that I can't fix it.  Please can someone explain what I need to do?

  Thank you.

  From Internet Explorer

  Original title: I got a new hard drive installed in my laptop. I need to reconnect my printer with my laptop - problems with this. Help, please.   

  Hi Jessie,.

  Unplug the printer first. Insert the Driver CD for the printer. install by clicking on Setup. continue when asked to connect the printer and connect the USB cable to the laptop. There is not any question...

• I have adobe CS6 on my old hard drive and I want to transfer more in my new hard drive. I don't have the disk that it came on more. How can I do this? also, I never put a single copy on a laptop and it is accepted 2... If this is important.

  I have adobe CS6 on my old hard drive and I want to transfer more in my new hard drive. I don't have the disk that it came on more. How can I do this? also, I never put a single copy on a laptop and it is accepted 2... If this is important.

  Disable (help > deactivate) on your old hd.

  then install it using the installation files and your serial number.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• How can I move my operating system to a new hard drive or other solutions, must be the Media Center

  My computer a gateway 815GM Media center PC has become black and start with some gray characters and words back up your data and replace the hard drive is bad. (or similar) My question is how can I move the operating system Windows XP Media Center Edition 2005 to a new hard drive.  Since the problem is the hard drive and all the computer a new operating system should not be purchased.  If there is no way to move it is it possible Microsoft send a replacement free of charge, or at least OS with only shipping.  My computer came with it pre-installed, and I have not received the drive with the OS on it.  What can I do?  Thank you for your information.

  When you received your entry door, it came with a CD or operating system recovery disc. If you no longer have that (or has not made a recovery disc set a utility included), contact Gateway to buy a set of recovery disks. It is normally fairly cheap. Then install the new hard drive and booting with the recovery disk to restore your computer to the factory State. MS - MVP - Elephant Boy computers - don't panic!

• New hard drive, Elements 9 continues to lose the image location

  Several months ago, I installed a new larger hard drive.  I had problems with it's partition table after using it for only a month and replaced by a similar drive.  I still had the old drive more small with almost all my files on it so I cloned these are partitions to my new work properly in the car.

  The operating system on the C: drive, my photos are on the old drive D: partition smaller non-corrupt is always in the computer and appears as drive I: I: dirve has more photos on it I backed up the addition.

  I discovered that items think my pictures can be found on the i drive: path is correct in the properties except it appear as I:\My Pictures\etc instead of D:\My Pictures\etc, if I'm trying to recconect in items when I navigate to the correct folder location he finds the picture but does not connect to give an error "the file is already in the catalog.

  I removed my catalog existing, made a new catalog and then get all the photos of my D drive.  At the beginning he showed all the files in the correct location, but the next day he still thought once the photos were on the I: drive.  I tried this twice and each time he returned finally to the I: drive.

  Anyone knows how I can get items to realize where my photos are really?

  I also tried to move all the photos on the i drive: reproduce the structure of folder, I then did a backup of the items and a restoration of items on the d: drive, when I've done that elements immediately said that the photos are still on the I: drive.

  Could drive cloning have confused elements?  I don't think that my hard drive for a short time with the problems of partition table is related to this.

  Thank you.

  Yes, the cloning is done.  PSE uses the volume as well as the drive letter ID to keep track of your photo locations.  The cloning tool most likely created volumes with the same ID of the volume.  Type 'flight' at the command prompt for each of your drives/partitions to see if the volume ID are the same.  If so, search the site of Microsoft for instructions change code. a reader

  Ken

• You want to transfer my Win XP system on a new HARD drive. Are there problems with the copying of the system partition?

  Want to transfer all the information on my current including system partitions and data to a new HARD drive than my current HARD drive shows signs of debris. I suspect there are a few problems in the copy of the system partition as some files are not available for copying while windows is running?

  I advise to read the article on the copy of the hard drive in the first place, you can learn more. (:

• New hard drive and cloning Windows asking for the password and end the session

  Hi all

  Need help please. I just bought a Cavior of WD 1 TB hard drive. I have used Norton Ghost to clone my old hard drive again. Then I removed the old hard drive and another to start the system. Currently, Windows XP was asked to enter the password (in my old drive hard, there is no password entry required). When I press ENTER, the windows log.

  Also, I tried to log in after you have set a password using ERD Commander (locksmith). I get the same result, that is to say Windows log off after entering the password.

  I am at a loss on how to proceed from here. I do not have the CD Windows XP that I bought this computer a few years and did not remember receiving the Windows XP CD. I don't have the product key which is glued on the computer case.

  Help, please. I have to activate Windows again?

  Ghost allows you to create a backup "Image", and then restore the image to the new disk.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Acer Aspire TimelineX 1830 68U118-t with a new hard drive. How can I get the bluetooth to work?

  I have an Acer Aspire TimelineX 1830 t-68U118.  The original hard drive died, so I replaced it with a new hard drive.  I loaded Windows 7 x 64 and loaded the chipset drivers and the network drivers.  The laptop is always my bluetooth equipment (even if I loaded the drivers Atheros).  Does anyone else have this problem?  How can I get the bluetooth to work?

  It would probably depend on the status of the warranty of the system.

  You must contact the service for options.

• New hard drive for HP6930 - BSOD when installing the OS

  I recently bought a new hard drive for my HP6930 so I can switch between my work and home demands (they cannot reside on the same hardware).

  Both drives are Fujitsu SATA 160 GB.

  After swapping the drives and boot from CD to install the operating system - I get a BSOD, hardware failure - "the system was arrested to prevent damage...". "with a comment about the check of the hard drive.

  Can anyone provide insight into what I'm doing wrong?

  Thank you

  Dave

  You can integrate the drivers Sata (ICH9M-E/M SATA AHCI) and burn a new cd XP with nLite .

   

  Here is a guide showing how to integrate and here drivers Sata. 7-ZIP or Universal Extractor are good at unpacking the installer.

• After you have reinstalled a new hard drive, my system is slower than before

  I have a dv6000 HP Pavilion with Windows vista 32 bit.  My hard drive crashed and we bought and upgraded to a 500 GB.  I reinstalled all my software and update everything, but it seems that it has not been installed correctly (vista).  This is my 2nd hard drive and the 1st time, we have not had any problems.  This time it does not appear that correctly reinstalled Vista.  None of my previous icons came back, I had to do these myself.  My system is "slower" than ever.  Commissioning is slow, clicking in IE is slow.  My system seems to freeze and lock up a lot now then that on the internet or turned off.  Sometimes just clicking on IE or even one of my programs, it takes a very long time to come.  No information has no reinstall my external hard drive, everything here is new and fresh.  I'm just uninstall everything and try everything again.  I am completely frustrated.

  Hi Jan,

  Do you have more details on the hard disk that you purchased? These can be signs that the drive is defective and fails.
  Usually, if a car goes to the failure of your computer behaves strangely. This could be anything to take time abnormally long starting or opening programs to receive errors trying to save files.
  Since how long have you bought the new drive? If he was recently, which means the last month or so, I think it would be better to return it to the store that you bought it and exchange it for a scratch disk.

• Need help please, bios sees the new hard drive but still cant boot from the cd-rom

  HI there, Im having some problems here. First of all, I have a Dell Dimension XPS Gen 2 with BIOS A06. I replaced the original hard drive to 120 GB because I received a stop error code with a new 320 GB (000000 x 24 or somethinglike that) but after research I was convinced it was the reader. I installed the new drive and the BIOS sees it under drive as primary drive SATA configuration... It's good, I guess, but now when I go to the sequence of hard drive I get (1. Unknown device (not installed) 2. System BIOS 3 boot devices. (Not installed) USB device) why the drive is not displayed here?

  OK, so now when I try to boot from a CD-rom Home XP I get "strike F1 to retry boot, F2 for Setup utility. I can't seem to get around this problem any time now. I can get it to boot from a floppy disk, but not the CD, why is this? The two CD-ROMs are appearing in the BIOS as second master and slaves. IM really stumped on this one, please help!

  Message edited by jaygen on 18/03/2008 20:22
  
  

• Cursor flashing at the start of the system and hard drive not working do not on the other computer

  Original title: I need help with my Hardrive

  Recently I had problems with a hard disk of computers. So I'm going to give guys the full story, I fell on this computer, it's actually my mums computer and it had a blue screen at startup error. I'm sorry, but I don't remember that the error was called on the top of my head, basiclly I quikly searched online and alll they say should use fixboot. So I did and the computer booted Windows XP very well. So the next day, when I was starting the machine (just to let you know, it would be the first start since I used fixboot, other than the right after that, I don't know if it would make a difference).

  In any case, while trying to start, there was just a slider, or as underscore that retain just flashing in top left corner. I thought that maybe I should reinstall windows on another partition so my files would be safe. I did it, the installation program had no problem with it, but when I booted up I got the same line of flashing underscore / cursor in the upper left corner.

  I thought that maybe I should back up the hard drive using my other computer so I tried to plug in the hardrive in my work computer and the hardrive started to heat up and as if it worked but any hardrive was getting into my computer, I refreshed it, started the computer upward once again, nothing.

  So my question is what is the problem with this hardrive and how I save? I'm ready to do anything, use the live CD, using another computer. I have precious moments of family on the hardrive.

  Thank you guys

  Hi Joemost,

  As you have important data on the hard drive. We recommend that you contact the vendor of hard drive to diagnose hard drive or visit the nearest tech store to save your data.

  There are chances that the boot files are missing on the computer and also you could have not connected the hard drive as a slave when you connected to the other computer. Once you have saved the data, you can repair the existing windows and check if it starts successfully.

  Try these steps to repair install Windows XP:
  a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
  b. on the "Welcome" screen, press ENTER to start the installation of Windows.
  c. accept the license agreement and Windows will search for existing installations of Windows.
  d. Select the XP installation you want to repair in the list, press R to start the repair.
  e. the installation program copies the necessary files to the hard disk and restart.  Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
  f. when the installation is complete, check if Windows starts correctly.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to install a new hard drive and I don't have the installation discs for Windows, is it possible to get my old copy of Windows as a download?

  Help download windows on old laptop but I have a problem...

  I have an old laptop that I want to install a new drive hard in and I don't have the installation discs for Windows, is it possible to get my old copy of Windows to download so I can fix it this thing? I have my code produces the thumbnail but no physical copy of the Install disks.

  Unfortunately, there is no download of Windows Vista available bits.  Please see: How to replace Microsoft software

• Accidentally, I installed the upgrade to Windows 7 without the first installation of Vista on a new hard drive. How can I remove the upgrade and install Vista?

  I replaced the failed hard drive and then inadvertently loaded upgraded Windows 7 before I reinstalled Vista.  Now I can't understand how to remove the upgrade to Windows 7, so I can install Vista.

  Boot from the Windows Vista DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Click on drive Options
  Select the disc/s click on Delete
  Click new
  Click on apply
  Click OK
  Click Format, and then click next to proceed with the installation

  or you can try this for Windows 7:

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.