hand tool shortcut does not

Similar Questions

• The space bar shortcuts: showing hand tool but does not

  Trial of runing the CS6 on a Windows 7 laptop (x 64). I was in Photoshop (64) and noticed that when I pressed the space bar for the open image panorama, would show the hand icon, but the tool will not work. No matter how many times I click and drag, the image remains. If I select MANUALLY select the hand tool, it works, but the SPACEBAR shortcut key does not work. This problem persists through the 32 & 64 bit versions of Photoshop.

  Ideas? Help?

  Thanks for the help, Dennis & Co.

  Now, it's embarrassing confession time. I did more tests and found that the problem has persisted through various Adobe Applications. So I started looking for the causes of the problem with my system and noticed that TouchFreeze, a utility to disable the trackpad of mobile during the seizure to prevent the cursor jump around the screen of the Palm of your hand, was running (I only turn it on when I went to type extended). And, as soon as I left it, the space key hand tool shortcut has started working again. I use a wireless USB mouse &, so I do not know why the conflict occurred. Guess on some small level, the two could not agree.

  I am concerned when I saw many similar messages from the forum as paulburd, which dates back to earlier versions of CS. Hope he and others manage to find other easy patches - I feel like I got lucky.

• Shortcut of the spacer for hand tool bar does not work in Photoshop CC - tried to close all other programs

  The shortcut of the space bar for hand tool works not in Photoshop CC - as suggested by this form & others, I tried closing all other programs without result. I have also reset to the default photoshop and this did not difference either.

  Hi, can you take a look at this forum thread please?

  http://forums.Adobe.com/message/4411318#4411318

• I just bought Photoshop CC and the shortcut of the space for the hand tool bar does not work?

  I googled solutions to the problem and most of them said that I need to close other programs that I opened, as well as photoshop and then restart the program, so I tried this and nothing seems to work. Tool hand by itself works, but I prefer by far with the SPACEBAR shortcut as I need to work fast and it's much easier.

  Is it possible that I need to activate the SPACEBAR shortcut, because I bought the software this morning?

  Thank you

  Hi Jessthristan,

  Hold the space bar to drag documents works very well for me. You can try closing out of all your other applications one by one and see if one of them interferes with Photoshop? Chrome is known for sometimes pleasant not with that.

• The SPACEBAR shortcut does not work.

  The hand appears, but I can't click to pan - it is not catching. If I switch to the hand tool, it does not until I click once, then work. I am running Illustrator CC on 10 of Windows on a new laptop Asus. Thank you in advance for your help!

  Found the problem! Asus has a default setting that helps the trackpad while typing, in order to avoid accidentally moving the cursor stop "helpfully". Once it comes into play, it is impossible to pan. Turned off the setting through settings > devices > mouse and touch pad and it works very well.

• (1) how to undo what I have done to my tools?  All I get is hand shoiwing when I click on a tool and tool wil does not. (2) how can I get my CC installed in my dektop in addition to my laptop?

  (1) how to undo what I have done to my tools?  All I get is hand shoiwing when I click on a tool and tool wil does not. (2) how can I get my CC installed in my dektop in addition to my laptop?

  Click window > workspace and restore of your workspace.

  to install the application of office cc, https://creative.adobe.com/products/creative-cloud

• 'Ctrl + End' keyboard shortcut does not work as expected. I tried safe mode. does not move the tab to the end of such specified list, just scroll to the end of the page.

  According to http://support.mozilla.com/en-us/kb/keyboard+shortcuts,.
  'Ctrl + End' should move the active tab to the end of the list of tabs.

  But the shortcut does not work. Only, it scrolls to the end of the current page as if only "End" is pressed.

  I tried the mode without failure of firefox and closed all other open programs.

  What to do to debug this problem?
  or may there is a bug in firefox somehow?

  See the post of dao in this MozillaZine forum thread: http://forums.mozillazine.org/viewtopic.php?f=23 & t = 1304895

  Add code to userChrome.css below @namespace.

  See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

  @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
  
  .tabbrowser-tab[selected="true"] {-moz-user-focus: normal !important;}
  

• OfficeJet Pro 8600 desktop shortcut does not open

  Het all. I just replaced my old HP 4180 with a new Officejet Pro 8600. We have three computer that connects to it, and the shortcut on the desktop to open the software of the printer communication does not work only on your laptop. I used the installation of itentical on all computers. The Office has the full package software and two laptops have only the basic print and scan package installed. I checked the target of the shortcut on two laptops, and they are identical. I also tried to disable the antivirus and firewall software, but that made no difference - still unable to open the software to set the printer preferences, etc.

  The laptop in qiestion is an EeePC H1000 running XP 32 bit, SP3. BTW, the laptop that has no problem is an identical unit.

  When I select the shortcut, the hourglass appears for a few seconds, the wireless icon flashes as it appears that the software is attemptong to connect to the printer, but the window indicating that it is retriving the device information will never appear and therefore also the printer wizard window also never appears.

  There's no problem with printing. Just get the Printer Wizard to open. Also for the record, if I select the printer in the Control Panel printer and faxes section, can I get the printer properties and preferences windows and make changes, but no way to get the companion window.

  I tried to reinstall the HP software without change. I also tried a "repair" and also no change.

  Any thoughts appreciated as to what else to look for that may be causing my problem.

  Finally, find my own solution. I followed the instructions in the Support Document HP c03640384 HP Printer Wizard opens with an error in Script or in Notepad.

  Even if it wasn't exactly my problem - I was just getting no response at all, - using the patch of registry (for my WinXP) of this document got my desktop shortcut does not work to open the Print Wizard.

  http://support.HP.com/us-en/document/c03640384

• My desk top of page shortcuts does not open in a full screen__

  My desk top of page shortcuts does not open in full screen

  No matter what shortcut you use to launch the window, right-click and select Properties. Under the 'Run' drop-down list, choose "expanded".

  If the window opens small, try the following:

  Take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first and this one last. Windows will remember the * last * screen size used the next time that you open the program.

  Bruce Hagen MS - MVP [Mail]

• HP Officejet 7110 shortcut does not open

  I have a very frustrating problem. My HP Officejet 7110 shortcut does not open when I try to open it. As a result, I can't check my ink level, etc.. I uninstalled the printer 5 times driver and reinstalled as USB or wireless or even offline, I disabled my antivirus program and disabled the internet during installation, but nothing has the desired result.

  Hello

  Try following these steps under a Solution to install the HP software patch, according to me, which should also help resolvng a question as describe you:

  http://support.HP.com/us-en/document/c03640384

  Shlomi

• shortcut does not

  All of a sudden mark (ALT + 2) shortcut does not work for me.  Seems that all the shortcuts which involve a certain number do not work.  If used with a letter - they are ok.  My number lock is not on.

  Try the numbers on the top of the keyboard.

• Case change keyboard shortcut does not work in the PL/SQL Editor

  I use the keyboard shortcut CTRL - SHIFT-"quite a bit to change the case of the code. I'm in the latest version of EA and this shortcut does not work for me in the PL/SQL Editor, but still does not work in SQL Editor. You do not know if this is normal or not, but miss me it.

  Unset for the Code Editor and spreadsheet and together for other category - then it will run in a SQL worksheet and an editor of proceedings

  The PPE of the cpu, if necessary, take a jstack and start a new thread.

• After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. How to fix?

  After upgrading to LR 6.2 G (grid mode) command shortcut does not work in the library module. It works well to return to the grid when in the develop module. The problem was not resolved with LR 6.2.1.

  PS: Being a urser LR since 2008 I hate the new import dialog so I have stopped using the program and will do so until the classic dialogue is back. Or it won't and I should start looking for alternatives?

  Rune

  One number of others have experienced this problem - please add your vote and details of this bug report in the Adobe official feedback forum: Lightroom: keyboard shortcut 'G' does not not in the library module.

  A few others have reported that restart the computer immediately after resetting preferences seems to fix the problem.  Also note that you can use the ESC key to exit the view library Loupe return to the display of the grid.

• content tool text does not allow me to adjust the attributes of individual word

  content tool text does not allow me to adjust the attributes of individual word

  You should be able to do all those without a problem...

  This screenshot I did all those you mentioned and the italics and underscore.

  

• InDesign cc - double keyboard shortcut does not

  Hey all,.

  I hope I can get an answer to this. It is not a huge problem, it just messes with workflow and as such is quite annoying!

  The problem is with other versions of Indesign, you can press "command + Alt + Shift + D to duplicate an object as many times as you wish. I tend to use this function a little. However with the release of InDesign CC the keyboard shortcut seems to no longer work. I can go to the Menu change and use the duplicate feature it... (the keyboard shortcut command is sitting next to the word again), but it's quite inefficient when you want to duplicate an object 25 + times. Someone else this problem? Is it possible to get this function to work?

  Thank you!

  --

  Using OSX 10.9.5

  I also work on a Mac with InDesign CC 2014.2. I am running Yosemite. I also noticed that this keyboard shortcut does not work. I can't see an obvious conflict (such as the system of shortcuts).

  Try using edit > Edit keyboard shortcuts to assign a different shortcut. On a Mac, you can use the Ctrl key, which is not usually used. CTRL-D works very well for me.