Handles sign and reminders

I'm having some problems with the Panel handles and reminders, I think I can be misunderstanding exactly what consititues a 'panel '.

My program has only a single panel with three tabs, namely panels and section orders of my .h file looks like this:

#define PANEL 1 / * callback function: panelCB * /.
#define PANEL_TAB 2

My problem comes in the reminders when I try to set or get values of control, I have a reminder of command button that looks like this:

int CVICALLBACK StartLoggingClicked (int, int int event, control panel,
void * callbackData, int eventData1, int eventData2)
{
switch (event)
{
case EVENT_COMMIT:
SetTabPageAttribute (panelHandle, PANEL_TAB, ATTR_DIMMED, 0, 1);
SetTabPageAttribute (panelHandle, PANEL_TAB, ATTR_DIMMED, 1, 1);

SetCtrlAttribute (Panel, TAB_MON_COMMAND_PAUSEMON, ATTR_DIMMED, 0);
SetCtrlAttribute (Panel, TAB_MON_COMMAND_STOPMON, ATTR_DIMMED, 0);

break;
}
return 0;
}

panelHandle is the global variable assigned by the call to LoadPanel. When I look at the table of values and panelHandle they are different (for example, panelHandle = 1, Panel = 4). Coincidentally (or not...) 4 is the value assigned to the command button in the .h file.

If I do: SetTabPageAttribute (Panel, PANEL_TAB, ATTR_DIMMED, 0, 1).

I get an error "the control is not of the type expected by the function", but it works very well with the global panelHandle.

If I do: SetCtrlAttribute (panelHandle, TAB_MON_COMMAND_PAUSEMON, ATTR_DIMMED, 0);

I get an error 'Invalid control ID', but it works with the parameter callback 'panel '.

I have another article of the code in a function called by the recall:

GetCtrlVal (panelHandle, TAB_BOARD_STRING_DATAFILENAME, & t_LogFilePath);

Gives the error "the command has not value.

If I pass the value of the 'panel' reminder to the function and do:

GetCtrlVal (Panel, TAB_BOARD_STRING_DATAFILENAME, & t_LogFilePath);

I get "invalid arugment type: found"pointer to table 260 char", should"pointer to int.

It seems to me that the values of the Group and panelHandle do not match to what I think they do because, it seems, control of the values that I'm passing are false (i.e. do not correspond to the correct Panel) in some cases. Any help would be greatly appreciated.

I searched for details about what did and did not imply a Panel to try to understand why I see different values, but I have not found anything. If there is a reference that I missed please point me to it.

We are here in the typical question everyone who uses a tomb tab control. Be telegraphic,

each page of a tab control (actually is) a panel separated with its own handle to use when it comes to control over the page of the tab itself.

To be more clear, the tab is control over your main table and dealing with the tab control must be made with the handle of the main panel (panelhandle in your case): this is the case, for example when you use SetTabPageAttribute or GetTabPageAttribute or the setting / recovery of the attributes of the tab itself control (ATTR_TOP and so on); This is also true if you want to run the control tab with InsertTabPage, CopyTabPage and so on.

However, before turning to a control on a page of tabs, you must retrieve the handle Panel appropriate to the page of the tab itself, for example using GetPanelHandleFromTabPage. With this handle, you can send commands located on the tab page. Only in the case where your reminder is triggered from a control in a page of tabs and wants to act on another control on the same page, you can use 'panel', which is the first parameter in the callback of control: this is the case when the reminder of a button on the tab page should read the value of a control on the same page. But if your button is elsewhere (outside of the tab control or on another page of the tab) you will need to retrieve the correct handle before you attempt to set a control: otherwise will result in errors that you find and a little more, you don't have yet.

The example of TabExample bundled with the CVI (\samples\userint folder) can be useful depth in the use of the tab control.

Tags: NI Software

Similar Questions

two locks of laptop see the light as lock sign1 and lock signed and fully offshore

Hello

I have HP 6730 laptop computer b today, when I start it show me

two locks light as ld (lock sign1) and (lock signed) and turns it off completely

lock sign1 means a pic of lock with number 1

average of locking signed a lock with a text pic

It's not start all these two locks photo blick 2 times, then turns off completely another conduit of speakers and! and illustrated also box.

No display at all.

Please help what is this error?

Thank you

Those are the LEDs for shift caps lock and number lock. The fact that your computer does not come on and the lights flash means that the laptop trying to communicate an error code. See LED display empty Error Codes for more information.

What the handles, threads, and processes means or function, they are performing?

My son will ask me a question and I could not answer (it is perhaps a good thing because I think he will try to enter and change something he doesn't know) so I thought that I felt I'd better try to find out. He and I are eager to know what the handles, son and process average or functions, they do. They are in the performance tab in Windows Task Manager.

Thank you

Hello

A process handle is an integer value that identifies a Windows process. The Win32 API call a HANDFUL.

When you start a program, this program runs as a "process". It's something that runs in its own protected area, with its own memory. Other processes cannot touch this memory.

A few times, the program needs to do several things at once in a way of multitasking, similar to how the multitasking process. For example, a spreadsheet can recalculate the cells you enter data. He * could * start another process, but they can't (easily) share the memory, he would need to if recalculate cells!

Must be a different sort of process that is not quite as separated. It is a "thread".

Process: the number of applications that are running at some point in the computer.

Hope this information helps.

RealTek HD Audio driver "stdriver64.sys" not digitally signed, and update returns the message "everything is up-to-date.

Hello

Recently, I checked my RealTek HD Audio drivers and found that the "stdriver64.sys" driver is not digitally signed. It can be connected to a crash problem that I have known for two weeks now, so I try to update all the drivers and see if it will solve this problem. When I click on update drivers for RealTek HD Audio, a message returned quickly saying that all drivers are up-to-date. But again controlled the pilot "stdriver64.sys" shows that it is not digitally signed. Is there another way to update this driver or another way to take with this? Thank you for your help.

Preston

* original title - RealTek HD Audio driver "stdriver64.sys" not digitally signed and update returns message "everything is up-to-date. How can I solve this? *

Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

See you soon.

Mick Murphy - Microsoft partner

How to save sign and passwords on sites I visit

Hello.. until I uninstalled and reinstalled firefox, I was able to save my sign and passwords, he filled in when I started typing 23 I can't find how to rebuild, I have go to the options but the "Save password" is grayed out and I can't click on it... I don't have the orange word of firefox at the top left of the homepage... How can I get that and then return to the location the file, edit, view, history etc.? Thanks for your help

Hello Joan.

If the Security tab is always grayed out, go to the tab privacy, beside him, to ensure that private browsing is not verified and 'play' with privacy settings until the password box is not grayed out (I think I remember having to play with it a bit in order to release this box) , but it does not work afterwards.

Let me know if this solves the problem for you.

Kind regards

BearPup

Mouse randomly turns into a bigger sign and does not act as a cursor to all the

original title: the behavior of the cursor

Sometimes, and often, my cursor turns into a huge sign and does not act as a cursor at all; Let me not select, click or anything like that. Acts as a tool "edit page." I can't understand why or how it turns into that.

In the mouse settings, make sure that ClickLock is unchecked. This feature, if enabled, will cause the cursor being stuck in the corresponding mode.

How should I organize appointments and reminders

How should I organize appointments and reminders

Usually using an e-mail management program, you need to install

for example, Windows Live Mail (free), or MS Outlook usually a part of the paid for the MS Office suite

Windows that display no real sign and how can I activate it now? Display of error 0xC004c008

Windows that display no real sign and how can I activate it now? Display of error 0xC004c008

http://Windows.Microsoft.com/en-us/Windows7/Windows-7-activation-error-0xC004C008

How to activate Windows 7 manually (activate by phone)

1) click Start and in the search for box type: slui.exe 4

(2) press the ENTER"" key.

(3) select your "country" in the list.

(4) choose the option "activate phone".

5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

(6) explain your problem clearly to the support person.

PCA sign and singular values

I have read some pretty good information on PCA, so I grok in the MDGS, APC tries to reduce the number of attributes by projecting on the vectors 'feature '. I am curious about the sign of the singular value. It is my understanding that the magnitude is the 'distance' so far that the feature should be projected onto the characteristic vector. I think, but I'm not positive, that the sign of the singular value is the direction along the axis of the attribute attribute must jump to this projection.
I searched a bit for this information, but cannot be verified. Can someone comment?

The singular values are associated with swine vesicular disease from PORK and are always positive. The question is probably on the sign of the value of the function that is the projection on the new coordinate axis. The feature vectors represent a new coordinated basis. The bases have directions, so there is a sign associated with the projection. Note that the directions of the axes are somewhat arbitrary, and different solvers may differ in signs and nothing else. If the value of the characteristic is the projection of the point of origin on the new axis and can have a positive or negative sign and the extent of the projections can be used for comparisons. Projections of PCA are preserving distance, so you can compare the data points in the new space.

Adobe sign and the SFDC approval process

Is it possible to approve records of Salesforce.com (SFDC) using Adobe sign auto approve once a signed agreement has been returned?

Hi arris-divg ,.

Automatic approval is not possible using the sales force.

Signer and approver must manually sign/approve the documents.

Let us know if you need additional assistance.

Concerning

Sarojini

Use of Adobe sign and cloud

I work as a librarian and trying to help a client to fill out an application. She has completed an application on Adobe sign and tries to send to a potential employer. I have no experience with this program. From what I can find, it must be saved in the cloud; However his potential employer said 'send to him '. Is it possible or can she trust that sound in the cloud and the employer can access?
Thank you!

Hi Sarah,.

By clicking on send after signing the contract, an email will be sent to him as well as his employer with a signed copy of the contract attached to this mail. A copy of it is also recorded in database Adobe sign (cloud referred to above), but it will create an Adobe account sign to access his copy of the contract online. Same copy will be available to the sender (the employer) in his account of sign of Adobe.

I hope this helps!

Sameer Puri

In an attempt to sign and date a w-9, I get the following message. "This form is editable in Adobe Acrobat DC. Please use Adobe life cycle Designer. "How can I get this document dated and signed without having to buy the life cycle Designer?

Please provide ideas to the next question. In an attempt to sign and date a w-9, I get the following message. "This form is editable in Adobe Acrobat DC. Please use Adobe life cycle Designer. "How can I get this document dated and signed without having to buy the life cycle Designer?
Thank you
Rick

Assuming that you are dealing with a PDF file provided by the IRS, you will not be able to e-sign. but you can fill the fields using Adobe Reader or Acrobat. The version of form W-9 that I have does not include a date field, but you can use the feedback tool add text to add a date. You can also digitally sign or use the annotation of pencil tool to draw a signature.

I signed and saved the document. As soon as, I can still change the document and therefore can't send an email safely.

I signed and saved the document. As soon as, I can still change the document and therefore can't send an email safely. How can I fix it?

Nothing will stop a PDF to be edited or tampered with; a few things will make it harder. That's why we use digital signatures. They don't stop editing, they mean that any change will be recognized as after the signature, so it is an unauthorized change. The signatures are on the interception of fakes, do not stop them.

I follow the plan. But he still need me to buy the app. It shows that the trial has expired. And then I had to buy. He asked to sign and said: I have subscription to use.

I follow the plan. But he still need me to buy the app. It shows that the trial has expired. And then I had to buy. He asked to sign and said: I have subscription to use.

Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

When I send a Document to sign, and when it is signed, two emails go directly to my trash. Why do they not appear in my Inbox?

When I send a document to sign, the confirmation e-mail arrives in my trash can rather than my Inbox. Even when the document is signed and sent back to me, the email goes directly to my trash and not Inbox. Why and how I fix this?

Hello Albert,.

It seems to be a problem with your mailbox you use. I would recommend safelist "[email protected]" and then they would come directly to your Inbox. If the problem persists, I recommend contacting your in-house IT.

Kind regards

-Usman

Handles sign and reminders

Similar Questions

Maybe you are looking for