Handwritten scanned to Tiff - DPI/pixel size requirements for printing

Similar Questions

• I have a hp printer and cannot figure out how to load envelopes size 10 for printing

  I have a hp printer and cannot figure out how to load envelopes size 10 for printing. Any help would be appreciated.

  Hello HeidiZarecky,

  You can follow the instructions in this document to load envelopes for your printer.

• Size required for El Capitan USB flash drive?

  What is the size of the flash drive USB should have so that it contains a bootable installer from El Capitan?

  Intend to upgrade my HD for one SSD and want to restart from a USB key.

  The installer for OS X El Capitan takes approximately 4-5 GB of storage, so I suggest you use a 8 GB USB drive at least to create an OS X El Capitan bootable Installer.

• HP Deskjet 2540: Cannot scan multiple pages into a single PDF for printer Deskjet 2540 Windows 10

  I'm scanning several pages (5) in a single document.  I followed the instructions in the other answers to the questions - I chose the type of pdf file, I chose a less than 300 DPI resolution (I use the default value of 200 dpi), and I clicked on Preview (and not scan).  However, there was no option 'Add' page when you preview is posted.

  

  I don't know that I've scanned multiple pages in a single document, following the intructions of same, before moving on to Windows 10.  It is no longer possible with Windows 10?

  Thank you.

  Is this program, the program of HP that was loaded with the drivers and full software?

  You should have something like this with a sign at the 07:00 position.

  

• Toshiba Satellite C55-B5362: how to scan multiple pages in a 1 paper for printer HP Photosmart 6520?

  I use Windows on a Toshiba Satellite C55 B5362, 64-bit version 8.1 and have printer HP Photosmart 6520.  This is a new printer for me.  I have scanned multiple documents to discover that they were recorded on the computer individually instead in a single document.   How to scan multiple pages in 1 document?

  Thanks for any help!  Please let me know if any additional information would be helpful in order to answer you.

  Hello dru98,

  Please click HERE to access the procedure which should solve the problem.

  PS: Expand ""How to scan with HP software " and"How to scan an original of several page into one file " "

• the value of the units and incriments pixels new documents for print, Web & interactive

  Hello

  Is it possible to change the units and increments of pixels?

  I think in terms of pixels. Same po would be better than some 51 0 and 66p 0 means for a document to the letter.

  Seriously.

  I set and reset it in preferences, and it does not stick.

  This has been a problem since CS3 or earlier.

  Why is it even a question?

  
  If I am delayed?

  The set prefs to no open file to make them the default values of the new files...

• Windows 7 drivers required for printer Canon MPC190

  are there drivers available yet for Win7 to use a Canon MPC190 printer? If yes where can I find them?

  Windows 7 drivers (canon?)

  "kiwi2k1" wrote in message News: cc87a008-6e7e-4016-a01b-72eca2ab113f...

  are there drivers available yet for Win7 to use a Canon MPC190 printer? If yes where can I find them?

  All Canon printer drivers are available on www.canon.com and select the country where the printer was purchased.  I can't find a printer MPC190 on US site but see a Canon MP190's inkjet printer. Does not check any another country and Canon and other companies to produce and sell different models in different countries.

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• Scanning at 600 dpi on HP Photosmart 7520

  Hello everyone

  Can someone help with the following:

  I do about 80 color A4 photo book and b & w prints and want to print the majority in format full page (A4).

  I already scanned successfully (7 x 5 "in size) black and white prints at 600 dpi and got 3.5 MB + scans files sizes.

  I went on the scan (10 x 7 "in size) color prints at 600 dpi and get the following error message appears:

  Large file

  Cannot get the device files.  The file exceeds the maximum size limit.  To decrease the size of the file, try reducing the resolution of image or dimensions.

  I am a novice to the scanning of fingerprints.  It justs strange it is a maximum allowed size when you can scan at 1200 dpi on HP Photosmart 7520... It will scan at 300 dpi color prints, but I do not know dimensions/size is good enough for printing in A4.

  Any advice would be welcome.

  Thank you very much!

  Hi Rennes,

  This problem occurs when scanning via HP Scan?

  I would recommend scanning using HP Scan to see if you encounter the same problem:

  Scan from Windows 7 with full features HP software

  Please let me know!

• Pixel size of Keynote slides

  Hello!

  I created slides to a keynote presentation in the SGP and I was wondering if anyone knows what is the size of slide keynote default widescreen?

  

  Photoshop has a 'film & video' preset and under size has several options b UT none for keynote or projection...

  Also, as it is planned I guess it's 72 dpi as opposed to a higher resolution like 300 for printing?

  Any info would be greatly appreciated, thank you!

  Keynote projects on any screen you have, so the resolution (in pixels) is not relevant. What is important is the aspect ratio. This should be 16:9 in many cases.

  Now when you design for projection images and they are not the correct size in pixels, they get scaled down or explode with all the problems that are related to this (time, quality, etc.). R_Kelly guess is a good proposal, as it is about the size of a HD screen.

  The DPI value is completely irrelevant, as it is said only an image of 1920 pixels wide should be disseminated to 26.6 inches. But if my screen is smaller or greater it will be always screened, because we will use the format full screen. Even if project you onto a screen of 4 k, it will be the full screen size to use. On a VGA size screen, it will be reduced...

• A value between 0.00 18.00 Pixels and pixel is required.  Close value inserted.

  I'm having a problem where the type SIZE is unable to go beyond 18px.

  I tried to enter a value of 21px and the following message out: ' the value ofis between 0.00 18.00 Pixels and pixel is required. "  "More close inserted value."

  I have re-opened photoshop now shift + Option + command to remove settings from photoshop, but no luck.

  I checked the preferences of Photoshop in the software itself and reset dialog box, but still no luck.

  I don't know if the question related to the recent established.

  Anyone who could throw a few lights in this problem is greatly appreciated.

  -Steve

  PS: I use Adobe Photoshop CS6 & MAC OSX 10.9 +.

  

  Hi Trevor,

  I appreciate the help. Turns the problem is with THIS particular file per inch pixels is somehow on a 1 "vs 72".

  Simply, I entered Option-command-i to open the page size dialog box.  Uncheck resampling and replace the PPI 72 ". Checked again, and then click ok.

  That seemed to do the trick.  Thanks for the effort

  -Steve

• How to export an image from .tiff without pixelation 72 ppi?

  I see images for printing on vinyl, with the printing press demanding 72 ppi .tiff files.

  Produce the Illustrator (.ai) file and printing it produce a clear image on paper without pixelation.

  However, when I export to .tiff @ 72 dpi, the result is heavy pixelization that I can't print.

  How to avoid this pixelation when exporting to .tiff in Illustrator CS6?

  Thanks for any help you can give.

  I really know whst you can do on such a small iteem except to find another printer that cn print 125 P3S.

• Scan at 4800 dpi with CanoScan LIDE 210

  I have a Canoscan LIDE 210 connected to a Mac running OSX Mavericks (10.9.5). I downloaded the latest version of the driver and the latest MP Navigator. I need to scan at 4800 dpi (depending on the specifications of the LIDE 210), but the driver and the MP Navigator app only to select a dpi, 600 dpi maximum when scanning. I can also access the scanner with PhotoShop Elements 9, which, oddly enough, lets me select up to 1200 dpi - not yet enough. I've hunted settings or preferences that would stimulate the dpi avaiolable selections, but found nothing. Can someone help me understand how I can reach maximum scanning capacity of 4800 dpi scanner? Thank you.

  HI brewzzzer,

  You can scan at 4800 dpi with access from the driver of the scanner within the MP Navigator program.  To do this, please follow these steps:

  1. launch MP Navigator ex

  2. click on the PICTURES/DOCUMENTS (PLATINUM) on the SCAN/IMPORT tab.

  3. when the Scan/Import window, check the box for USE THE DRIVER of the SCANNER, then click on the green button. The ScanGear (scanner driver) window opens.

  4. Select the ADVANCED MODE tab.

  5. in the RESOLUTION of OUTPUT drop-down list, select one of the predefined resolutions, or enter a desired resolution.

  6. Select other settings as you want, then click on the SCAN button to start scanning.

  I hope this helps!  If you need help, we ask that you call please 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays).  A Canon technical support representative will be happy to help you.  There is no charge for this call.

• 7520 photoSmart All in One: error scan at 2400 dpi

  When I try to scan old photos at 2400 DPI in JPEG, I get an error at the end of the analysis.  If I scan at 1200 DPI it works, but then I can't change.  Error message indicates that the file is too large.

  The bit depth said 24.  Who is the problem and if so can I change?

  Hey @JL11,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see you having problems with a high-resolution scan to your PC for Windows 8.1. I can help you with that.

  What is happening is scanning at 2400 and 1200 dpi creates some massive files. Your PC is having memory problems when handling of 2400 dpi and has difficulty at 1200 dpi. You may be able to save the file at 1200 dpi, and then edit the file in another program instead. If this does not work then you will need to use 600 dpi or 300 dpi, which are two quality settings above.

  I hope this helps with your analysis and I hope you have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• Is there a coding to resize the screen of the application to adapt to any type of android devices? pixel size is 480 (height) x 800 (width)

  I have an application in which the pixel size is 480 (height) x 800 (width) and have everything set up, but when he in two android debug different with different screen sizes, adapted, while the other is not entirely planned out there. I tried it coding the way that some of the forums talked about but it doesn't seem to work. So I hope that if anyone out there has an idea on what I need to do for this fit into the second screen, please help.

  Flash a step different scale modes, which can help you with this. The default scale mode is showAll, which will make what you see. You could stay in this mode and just have extra graphics on the edges of the scene, which will appear on devices wider or higher. An alternative is noBorder, which would make the central fill step screen area. On larger screens, you lose a bit of the sides of the stage, and on larger devices, you would lose some top and bottom.

  Put one of these lines at the beginning of your document class, see the effect of different:

  stage.scaleMode = "noBorder"

  stage.scaleMode = "showAll";