Pixel size of Keynote slides

Similar Questions

• Is there a coding to resize the screen of the application to adapt to any type of android devices? pixel size is 480 (height) x 800 (width)

  I have an application in which the pixel size is 480 (height) x 800 (width) and have everything set up, but when he in two android debug different with different screen sizes, adapted, while the other is not entirely planned out there. I tried it coding the way that some of the forums talked about but it doesn't seem to work. So I hope that if anyone out there has an idea on what I need to do for this fit into the second screen, please help.

  Flash a step different scale modes, which can help you with this. The default scale mode is showAll, which will make what you see. You could stay in this mode and just have extra graphics on the edges of the scene, which will appear on devices wider or higher. An alternative is noBorder, which would make the central fill step screen area. On larger screens, you lose a bit of the sides of the stage, and on larger devices, you would lose some top and bottom.

  Put one of these lines at the beginning of your document class, see the effect of different:

  stage.scaleMode = "noBorder"

  stage.scaleMode = "showAll";

• Max pixel size photoshop supports

  Max pixel size photoshop supports

  The size of the max pixel photoshop support is 300 X 300 000px 000px

• Mosaic - how limit/set colors Pixel & size

  Hello

  I am trying to create a mosaic from a photograph

  Want to make 3mm square pixel size (when printing) and limit the range of colors in the colors of 7 or more (white/black to shades of blue in the middle and the extremes). Juggle with the size of the image seems to adjust the size of PIxel - enlarge the overall picture in terms of 'cm', but the image doesn't seem to be larger on the screen.

  FYI will use print as a "guide to support" for the construction of the mosaic. Is there a 'best' approach to use when you print very large images - in photoshop or another app/plugin?

  Either had some progress with the colors using grayscale or black & white - though, in trying to use "replace color" for my desired gray scale etc., it doesn't seem to change the color of a pixel to a different shade of gray - rather than one of the blue shadows

  Any suggestions on the best way to approach the aspects of color and pixelate/mosaic of color?  Seems to be a lot of different alternatives

  • Color: posterise, gray levels, replace color, indexed, colors black and white etc.
  • Mosaic: Mosaic Image size, pixelation, etc.

  So many choices - I'm a little stuck on the part of color...  Thanks in advance

  See you soon

  Understand the final image size and how much 3mm square you want for the height and width. crop or reduce your image size in pixels. Speed of image in your print size using nearest neighbor. This will create the correct number of 3mm squares. To force the colors, use Index color with a custom color table. Once you do this, you'll want to convert to RGB for printing and any other work you want to do with the image.

• How can I cut a picture to a pixel size you want quickly?

  How can I cut a picture to a pixel size you want quickly? for example, 600 x 600 pixels? I know as the 'cut', but how can I quickly cut it to the exact size without having to cut and cut, it is a tool for the cutting of a specific pixel size?

  Thank you

  Use the rectangular selection tool to a size fixed.

  Then transform the selection where you want it to be.

• Change the pixel size

  help with resizing 480/640 pixels for a pixel size of large 1000, resizing doesn't seem to work for me?  Windows Vista - Cannon A2500 - obviously not very well with my editing skills.

  Hello!  Try to use the size of the Image, in the Image menu.

  

  Because you want to increase the width of a specific pixel dimension, type "1000" in the 'Width' field, and then click OK.  This should do what you want.

  

• Increase the pixel size?

  How can I increase the pixel sizes

  Hi, can you be more specific in your question? Are you trying to 'rasterize' your image like this?

  

  Pixellisant image:

  Go to filter > Pixelate > mosaic.
  

  

  Then increase the size of the cell to achieve your desired look.

  

  Or you try to increase the pixel dimensions (i.e. the size of the image)? As Silkrooster said, you would go to image > image size, as shown below.

  Increase the pixel dimensions:

  

  

  You would increase the values in the areas of pixel dimensions to enlarge the image. However, your image will not retain the quality, that he was on the smaller size. See this article for more information on this subject.

  Please let me know if you have solved your problem, or if we can offer any assistance more.

• How can I manually set up a pixel size

  When you set a pixel size, it corresponds to horezontal and vertaical. I am trying to set different sizes and is not allowing me to do such as size 200 by 150 automatically when you set the other does its thing to match.

  

• Is there a way to determine the pixel size of type displayed in the browser?

  I'm always struggling with is type of line break, as I see it in Dreamweaver.

  "Actual size" in Safari, the type is bigger that I see it in Dreamweaver. I determined that 12px is the proper size, while work in Dreamweaver, but when I find the text online, it is much larger and line breaks do not fall where the author wants well to them.

  Here is the page in question:

  http://www.kgngroup.NET/logos_and_packaging.html

  I guess I'm wondering first, if there is a "sizeometer" that allows to identify real type pixel size as it appears, I can't say how much more it is actually what I am trying to build.

  TIA,

  Ken

  You can download a very popular plugin for Firefox called "Firebug". With this tool, you can inspect the items and view CSS properties on each. On the right side of Firebug, there is a tab for the values calculated , which will show you exactly what you are looking for, the extent of px of the text in question.

  That said, trying to nail line breaks in an HTML document is like nailing jelly to a wall. Users can (and do) change their font size in their browsers. You should address web design so that it accommodates various screen sizes, sizes of police and browsers. What you offer to your customer is literally impossible how you are trying to do.

• Blind Presenter: apply the font size to all slides

  Hi all!

  Keynote is a great tool for blind people create presentations; It works very well with the Apple own screen reader, VoiceOver.

  I have a few questions for you guys. your answers will make my workflow much more effective.

  (1) I know, use the minimum font size is 30. How many characters will fit online?

  (2) I've copied the text in a text document in a slide; of course, the font and size are not the same. Can you assure me that all fonts and sizes remain the same throughout the presentation?

  (3.) I have a table of 5 x 5 with numbers on a slide. I was told by sbd. who could read but not edit the documents Keynote (with Open Office) as the table is readable, but could be many, many more great. Is there a way of self-centring a picture so that it fills the slide?

  any ideas would be very appreciated. Thanks & best regards, Markus

  I regularly create educational materials for students with visual impairments through audio recordings.

  I can't imagine the challenge for blind people, creating material with Keynote.     I hope that the following remarks are useful as a point of departure if nothing else.

  I know, use the minimum font size is 30.

  In fact, the font size must be determined by the final product, which the spectators and the environment where the presentation takes place. Text at the point indicated 30 in a conference room is far too small to be legible, 30 points may be appropriate when sitting in front of a screen of 2 feet farther.

  How many characters will fit online?

  This, once again, must be determined by the final product, and not the number of characters can be demonstrated. What is really important is the number of words on a slide, not the number ofcharacters.

  The number of words that are easy to read on a projection screen in a small training room will be different for the number of words that are easy to read in a web browser on a computer screen.

  The rule for text created by professional designers on television broadcast as well as projected communications is a maximum of five words per line and 6 lines per page, a maximum of 30 words per slide. For example, in Europe, there are legal requirements imposed on broadcasters for viewers to read text easily.

  I copied the text to a text document in a slide; of course, the font and size are not the same. Can you assure me that all fonts and sizes remain the same throughout the presentation?

  Use the dough and the Style of game in the edit, the keyboard is shift option order V

  the table is readable, but might be much, much more. Is there a way of self-centring a picture so that it fills the slide?

  Select the table, and then increases the font size of the required amount.

  I am happy to answer questions about my answer.

• PSE7, how can I change the image pixel size?

  Hello

  PSE7 I am trying to resize photos at a lower resolution (100 pixels x 750 pixels) for a slide show of Premiere Elements.  In the editor, when I choose Image->-> resize, I only have the ability to change the size of the Document.  Can someone tell me how to access the dialog box that allows me to change the width and height in pixels?

  Thank you

  Patti

  First of all, you need to activate resampling before the dimensions of the window pixel box becomes active.

• How Label Keynote slides and elements of construction

  I'm on a Macbook Pro OS 10.11.4. I'm not as smart as other users, so I would be recognizing some grace if my question annoys experienced users out there. I have the latest version of Keynote and trying to find away from naming/labeling of each slide, but also from other things (like groups of measures/builds and builds).

  I am well aware of the position of Apple (I think) that we (the user) should simply not want , to do certain things, in their view. The context for me, I am the creation of animations and other graphics and want to be able to have a called "presentation", for example, 'technology '. Who would be in a slide that has televisions, mobile phones and so on. It would be great to be able to name a slide and a group of measures/builds and save these groups to a reusable template.

  I can't imagine for one minute that Apple will implement this because I think it's a great idea, but I was wondering if there was anything that I did not see, and if there is no useful reviews out there (not necessarily a 10-point work, impractical, even if I'm always intrigued on how people come with smart workaround solutions.

  Hi RhinoReturns,

  Thank you for using communities Support from Apple.

  From your post I understand that you want to not only rename slide masters that use you in a presentation, but also builds.  You can rename these slides masters by following the steps below.  Currently entertainment and generations cannot be saved in a template of slides, which must be created on a basis of slides.

  Add a master slide

  1. Click view in the toolbar, then choose Modify Master Slides.

  2. Do one of the following:

     • Click on in the toolbar, and then select a master slide.

     • In the Slide Navigator, select a slide with a layout similar to the layout of your choice, and then press ENTER.

  3. Double-click the name of the slide in the Slide Navigator, and then type a new name.

  4. Change the slide as you like by adding text, images, shapes, placeholders or other objects.

     If you want objects on slides that are based on this mask to the layer on the main objects, select "Allow objects on the slide to the layer with master" in the sidebar. (If you do not see a sidebar or sidebar is not to say Master Layout at the top, click on the slide in the Slide Navigator, and then click on the toolbar.)

     To learn more about layers, see layer, group and lock objects.

  5. Click done at the bottom of the slide canvas, or click display in the toolbar, then choose Exit Master slides when you are finished editing.

  Keynote for Mac: Add and edit the slide masters

  Take care.

• How can I increase the pixel size in iphoto

  Hi, I'm trying to increase the size of the pixel in iphoto - they need to have a minimum of 500 that can be used on ebay.  Any ideas?

  Photos does not increase the size of the pixels when exporting.  You get just the size of maximum pixels is your photo.

  Try this web page: http://www.imageenlarger.com

  The image enlarger tries to fill in pixels without blurring the picture.

  A quick and dirty method would be to zoom on your photo in pictures and take a screenshot.

• Why text inserts back on Keynote slide?

  With Keynote 6.6.1 with El Capitan 10.11.2.    Suddenly the text that I entered a slide is BACK.  IE SDRAWKCAB.

  I think I must have inadvertently clicked... but can't understand why it's happening.

  The text is back if NEW or CHANGED to another copied line.

  Any suggestions are welcome.

  Try to reset the Keynote:

  Perform all the steps in the order shown:

  • Keynote, you must use a request to work procedure removal tooluninstall: Appcleaner is free and works perfectly for this procedure
  • Empty the trash
  • Shut Down the Mac (Apple menu > turn off)
  • Wait 10 seconds, then press the power button
  • As soon as you hear the startup tone, hold down the SHIFT key
  • Release the SHIFT key when you see the gray Apple screen, start-up will take a few minutes longer than usual as the Mac performs a software repair
  • After the repair and the Mac is completely started, restart the Mac normally (Apple > restart)
  • Install Keynote from the Mac App Store

• Pixel size of current art

  I have an Illustrator image that I need to submit by 2400 pixels wide. I tried to 'export for the web', but do so includes the jury art format letter (and mostly empty) as part of my real image. It appears as a dotted rectangle that surrounds the actual image which is only about 1/10th/the size of the Board of Directors art. How can I determine the exact eight and the width in pixels of the image less art Board? So, how can I save the picture, and not to the art Committee, at 2400 pixels wide? Thanks in advance for your help.

  Choose: File > Document Setup... and set the unit th Pixels

  Select what you want to export.

  In the transformation Panel make sure that w and h are linked and type: 2400 px in the w box.

  Choose: Object > plans > selected Art coupon

  Export at 72 dpi (you can choose to use work plans)