HARD 301, problem with recovery disc error

Similar Questions

• Install windows 7 on a new hard drive by using recovery discs. (Pavilion all-in-One MS215UK)

  Hard drive crashed and HP sent a new with recovery discs that say they will reinstall windows 7. Discs and installed hard drive run for 'restore factory settings' by following the instructions. Takes about an hour and all 4 disks are asking but then becomes at the end and left with white screen saying "no operating system installed."  Left on for a period simply show this message in case something happening in the background, but nothing happens.

  2 extra drives came with set, but they simply refer to the instructions that make no mention of them.

  Please help I am a novice total things withthese

  Hello

  Download and create the bootable CD as described at the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-80183-1&cc=us&LC=en&DLC=en

  When you created this CD, insert it into the system that fails to start, restart, and wait until you see a window with a green check mark.  Next, remove the CD and insert your first recovery DVDs.  Reboot the PC and go through the process of installing the operating system again.  If all goes well, it should install properly this time.

  Best wishes

  DP - K

• Having a problem with the script error message

  The error message and web page script error every move I make now. I tried to check and uncheck boxes tab in advance internet options. I also ran a check of the system that did not help either. Any suggestions? Thank you

  Hi Mic,

  From the description, it seems that you have a problem with the script error message in Internet Explorer.

  To better understand the question, please answer the following questions:

  1. is specific to a particular Web site question?

  2 have you made changes on the computer before this problem?

  3. What is the exact full error message and web page of script error message?

  4. When you get exactly the script error message and web page error message appears?

  5. what exactly you're talking about when you say "system check"?

  See the article mentioned:

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

• I bought a physical copy of Lightroom 5, but I'm having a problem with my disc drive (iMac - vintage 2009 - running os10.7.5).  I tried to download a trial of LR5 creative cloud and using the serial number of the box, but the license key is not vali

  I bought a physical copy of Lightroom 5, but I'm having a problem with my disc drive (iMac - vintage 2009 - running os10.7.5).  I tried to download a trial of LR5 creative cloud and using the serial number of the box, but the license key is not valid.  Is there a way I can download a copy so that my license key will work?

  A download of Cloud will not work for a licensed version.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• 10-FC06-0002 - HARD drive recovery disc error load XP and Windows 7 very well

  OK, so I have a Toshiba laptop I want to restore because I had used it for school and he had a lot of things about what I didn't need and turned slowly. Rather than take things one by one, I thought it would be better to start from scratch. I jumped in the recovery discs, I created, restarted the computer and booted from the DVD. I have chosen all the settings to restore the computer to out-of-the-box settings and a time window that says «copy files please wait...» "After that the screen disappeared after 10 minutes or so, another window flashes on the screen for a split second (has not yet the chance to see what it was) and then an error window pops up error 10-FC06-0002. The only thing I can do is shut down my computer, and it does not start after that. After trying several times, I decided to come here.

  I know what you say. "Before coming here, search or something, there are tons of problems like that here." Well, I'm looking, and all the results told me to "make a copy of your drive and see if it works, if not its your HARD drive ' tried to make an exact copy of the disk using a tool to copy DVD of Google, no dice. I tried copy the files from the disc on the desktop on disk, did not work. Copied files on an old thumb drive and booted from it. The same problem. Make one. ISO disk image and it has burned, triggered the error as well. No matter how I try to run the restore files, the same error message prevails. This would point to the hard drive being broken, correct? This is where I get lost, Windows XP installs flawlessly and works faster that any other computer I used it, as well as Windows 7 beta does.

  -------

  Does anyone know a fix to this error so I can restore my computer? Should I order new disks of recovery at Toshiba? How much do cost?

  -------

  I created these recovery disks about a week after the computer is turned on for the first time. The only software on the subject was the preloaded software, Mozilla Firefox, and MSN Messenger. These two programs would have caused corrupted recovery discs to bring?

  THANKS FOR ANY HELP IN ADVANCE! : D

  -----------

  EDIT: Should probably tell you some info on the laptop. It is a Toshiba A200 - AH6, try to restore Windows Vista recovery disks created in the Toshiba Recovery Manager.

  Hello!

  To me it sounds like it's your Toshiba Recovery disk is noisy or something else. It seems that the disc can't be read properly.
  I doubt that s a hardware issue because you tried a XP and Windows 7 disk successfully.
  But as Akuma says that this can happen also due a poor quality DVD media.

  In any case, I think you need to order a new drive Toshiba Recovery directly.

  Finally and above all the software that you have installed (Firefox and MSN) didn t cause corrupted recovery disk. Theoretically, you can install what you want before you create the recovery disk. The recovery disk creator burning a disc bootable with the files in the folder HDDrecovery on the second partition. All programs that you have installed must be installed after recovery again.

  Good bye

• "HP pavilion slimline: problem with the disc of"recovery"would be"

  I just got a Seagate 1 TB drive backup and have backed up my entire computer to him.  My concern is that my "D" drive, the separate part of my computer that contains the disc "recovery", is almost completely full - its presentation as a solid red bar on my screen - only left 320Mo of 11.7 GB - would have this effect, the performance of my computer at all?  Why is it so plenty of anyway and what can do about it?  Problems with my email and its indicating that I am "" out of memory "-well, I've got a lot of memory on my C drive, which is not a problem, but the same effect my email D drive?"  I use Windows LIVE mail incidentally, and I had problems in the past with it, been quite some time however.  Woud grateful for the help with this.  He used to ask me to put in CD on backup drive D with - don't know why, but I immediately my Seagate drive, now, just do not know what I have to do at this point.  Thanks for any help.

  I have no idea why the "D" drive is a solid red bar, nor why it is so full.  I've changed nothing since I bought the computer.  How would I know if something is to use the D drive?  I thought that it was 'partitioned' off so that he couldn't be touched?  I have everything on my laptop hard drive Seagate, and I mean everything.  I also have system recovery disks of mirror image right after I bought the computer, but that does not tell me why that drive D is now completely "full", it should not be.

  I don't know if you have "solved" the problem, but I guess that the D drive is of no consequence right now even if its 'full' and probably shouldn't be.  Maybe my problem is WINDOWS LIVE MAIL, and I maybe need to do another post to see if anyone can help with the next.  Thank you.

• Pavilion G7-1328dx: I have a problem with recovery disks

  I have recived a message error (error bios 501) was one that says windows could not start at this point I did a system restore, it worked then it instaled updates and when I turned it off it seamed ok a few days elapsed before I go back and it didn't start so I tried to do the same restore point who had worked but im guess I chose the one bad because after that I could get in the bios for the test command and start system and info windows recovery tool not forbear even so I am really crazy and just ordered the HP recovery disks have tried a couple of times he says it didn't I saved a copy of the details , but I don't know how to open it so I can copy and past I also tried putting it in a windows disk because I realized that one problem I had is a new hard drive my boyfriend out the HDD without asking and wiped it and put it in his laptop, my friend was helping me with the laptop, but cannot stop now can someone please help

  Assume your drive recovery is ongoing demand... because the 501 error has not might be related to your operating system... or the hard drive...

  Maybe think I didn't read clearly on your description, but it seems that you already have recovery files broken, or the HARD drive is on form, no? Suggest that you call service help find someone help on data recovery. If the HARD drive has already been fomatted, it will take a few HARD drive recovery professional technician to do this action, using special equipment or tools. Sometimes it can get the restored data sometimes it breaks down, according to the State of the HARD drive. If he's already got formatt low level, it would be very unlikely to recover data... Then... you'd call better help service. Hope you can recover data.

  If you have already saved data I just re - install the operating system. It is easier. Alternatively, you can call the service provide the recovery disc number (printed on the label on the disc) see it's the right disc for your device. And try to use the right disc for re-installing.

• Satellite M30X: Trojan horse - total Formate with recovery disc?

  Hello

  I had a Trojan horse on my Satellite M30X. My Antivirus deleted, but every time I've been connected to the Internet, it appeared again. Not connected to the Internet it doesn't give me any problems. As I couldn't get rid of him, I backed up all my data and do a fresh install from the recovery disc. As long as the button for LAN wireless is disabled, everything works fine, but just a little while, after I turned on it, I get a blue screen. When I restart my computer with WIFI turned on, it produces a blue screen before Windows is properly loaded, even during installation. I tried restoring 3 times, but it's always the same result.

  1 is it possible, that the Trojan horse destroyed things of the pre installation?
  2. I can't choose to make a formatting during the recovery process. All data are lost, but I feel that's not formate the hard drive correctly, when everything is destroyed. It crushes just stuff?
  3. is there a way to make a good formatting, then install completely new Windows?

  It is not a problem of my WLAN card, internet being no problem under Linux.

  Thank you for your help

  Todier

  Hello!

  If you use the whole HARD disk Toshiba Recovery disk will be formatted so if you have any virus or Trojans on your laptop, they will be also deleted.

  But what BSOD code are you have? Are you sure that's the reason why the virus?
  You have the same problem if you connect a network cable to the laptop?

  Good bye

• Satellite C655D - problem with recovery

  Hello
  I have the Satellite C655D-S5515 with no additional DVD.
  I want it back or fabric.
  When, during boot press 0, not getting no RECOVERY option not only choose the operating system (Windows 7 only).
  How can I make laptop recovery?

  At first, I must say that since a long time, Toshiba and many other manufacturers of laptop also, doesn t offer disk facility with new laptops. Recovery image is saved on the HARD drive and the laptop owner should create backup recovery, recovery media creation. Its operation is clearly described in the document s user manuals.

  In General, when your laptop has a factory settings and changes nothing, you should be able to begin the installation of HARD drive recovery. I don't know what the problem with your machine and what is the reason why this option is not available, but what you need now is the installation of recovery disc.

  If you don't you should be able to order it. For making this visit https://support.toshiba.com/repair?orderType=SFF

  Good luck

• Satellite P200: Creator of recovery disc - error code: 0E01B5-26-2A030C00

  Hello

  I am trying to create the recovery disc for my new Sat P200 and it gets 1/3 of the way (1/2 way through the first disc) and displays an error message:

  "The question has occurred during the recording of the data on the disk. The current process will be stopped.

  An error occurred during the registration phase. Please check if the disc is scratched or dirty. If so, please try again with a new disc.

  (Error code: 0E01B5-26-2A030C00) »

  I tried twice on nine discs Verbatim DVD + R.

  Any suggestions as to what causes this problem?

  See you soon
  sophiajs

  I recommend you test different DVD media.
  Try DVD-R and from different manufacturers.

  From my own experience, not all CD and DVD is cared for and compatible.

  Greetings

• M1V66UA: problem with recovery media disk drive

  my laptop is HP envy x 360 bought around December 2015(it is still guaranteed).

  Today, I had a problem with my laptop (inaccessible boot device error) and a HPteam even could not able to solve it and told me that the recovery order media disk.

  the problem is:

  I bought the laptop in the United States when I was a customer place and now I am in India .

  HP India has informed me that they will not consider my request for recovery media order disk since I bought the laptop outside the India and told me to contact them.

  My question is

  How can I order the disc of recovery in India?

  Hello

  First of all, you can download microsoft iso and burn it to DVD or USB without needing a key, so do a good job of it for future use.

  If you have a real Windows 10 installation the system map is saved as your key with microsoft, so you do not need a new.

  Once you have fixed starting problems, MAKE YOUR OWN RECOVERY MEDIA IMMEDIATELY.

  Jelly Beanstalk will find your product key for future use, but it is locked to the system board.

  Piriform Speccy and Belarc Advisor will also add your serial number for a knowledge need.

  If in doubt please ask.

• Problem with recovery Partition(After i got a Virus)

  Hi all

  I use HP Envy 15 laptop with windows 7 Home premium x 64 bit installed. I don't create the recovery discs since I've had this laptop and what happened is that I had a virus on the internet but I have fixed almost all the defects of the system caused by the latter, but the main problem for me, is that it changes all the Player main file name in Virus1232 for example (d:\recovery converted d:\virus1234) and I spent hours on the internet for the names of folders and files right and I got them all but only a single file, not sure. My problem is when I enter the Recovery Manager it detects none my recovery partition (but the virus is not responsible for any deletion of file it just caused some change system) and just to talk I've also corrected the names of folders and files in the c: drive, since they are necessary also.

  

  What are the names of files I got in the D: drive: bootmgr - BT_HP.flg - CSP. DAT - DeployRp.log - HPSF_Rep.txt - language.ini. and let him file name is the one im not sure of: "HP_WSD.dat" (it's a file of size zero).

  The recoverymgrdump.txt just works & "leaving CSBRMgr::GetRPTOOLPartIndex!
  then he said to me:

  "Win32 System Info Code = 3, Message Info = the system does not have the specified path."

  and he also said:

  "CSBRMgr::HpcdFlgIsExistInUP : \WINDOWS\hpdrcu.prc does not exist."

  I don't know if this is normal, but also the deployrp.log gives me this error:

  "The package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab.

  of course there are errors more in both files, but I guess that those who are the most important.

  
  

  So my question is: the attributes of file in the d: drive would be responsible for this error (I changed all the attributes to be hidden and read-only system)

  OR

  If anyone has a solution please tell me what to do.

  Thank you.

  
  

  You are the best to order that a set of recovery disks from HP, doi a full restore using those.

  You can order here recovery media

  http://support.HP.com/us-en/document/c00810334

  .

  Or call HP on the phone to order a set.

  U.S..
  http://welcome.HP.com/country/us/en/contact_us.html

  Everywhere else
  http://welcome.HP.com/country/us/en/wwcontact_us.html

• Problem with recovery dvd - Win 7

  Hello

  After you perform a clean installation of Windows 10 I had problem with closing down my pc, it's a bug to win 10. So I decided to reinstall Windows 7 on my Acer Aspire M3920 of my recovery DVD made by Acer eRecovery management.

  The problem is, Setup stops and the #1 restore disc pops out after that the files were loaded from disk and is ready to begin the installation.

  This is the message: "there isn't enough free disk space on the drive for the files needed to continue the operation.

  PS: Before installing Windows 10, I deleted all the files and partitions on the hard drive. Maybe it's the origin of the problem?

  Someone who can help me?

  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  Download the .iso file
  then use a software to burn CD/DVD or USB flash drive and burn the .iso file
  Once completed, put the CD/DVD/USB on your PC, boot from CD/USB (maybe you need to start under the legacy if you have the UEFI BIOS)
  Press F12 on startup and choose the CD or USB
  at the level of the Office
  Select your HARD drive
  Right-click on the icon for your HARD drive and choose completely erase your HARD drive (it will erase any GPT or MBR at the disk), choose the first option after selecting the clear function.
  Exit the wizard partition, boot from the BIOS, UEFI return of the Legacy (if you have the UEFI BIOS) and boot from media erecovery.

• Can I retrieve C only on Satellite A300 with recovery disc?

  Hello!

  I am new to the new installation Windows built-in type. I was familiar with the old with Norton ghost. It was easy for me, but I have a problem with the new. I wants to recover C only on my laptop with a different size than the size of the plant.

  I want to delete the first partition and reorganize others because I want bigger partition for my data and small Partition for my system. Can I start the program with the CD, and then insert the Toshiba recovery disc and use the image of Vista on recovery DVD to recover only the C drive?

  Excuse me for my English. :-)

  Hello

  At first, I must say that your English is very good and understandable. ;)

  Back to the question of the recovery. I agree with you. With old Norton ghost recovery image, it was possible to install the operating system on a partition only. Unfortunately with the recovery media that you can create with your Satellite A300, something like this is not possible.

• 03-EEEE-0000 Recovery Disc Error

  Bad recovery disk. I installed an OEM version and everything worked fine.

  Hello

  It may be more useful to provide more details on your problem.
  What cell phone do you have?
  When have you seen this error? He appears during the creation of the recovery disc or during execution of a process of recovery?