Satellite P200: Creator of recovery disc - error code: 0E01B5-26-2A030C00

Similar Questions

• Failed to create the recovery disk - error code: 0E01B5-26-00037304

  Hello

  I bought the new laptop Satellite A300-1MC, but I was without recovery disc, so now I try to do disk recovery, but his show me then the following error:

  A power calibration area error
  and
  error code: 0E01B5 - 26-00037304

  I tried 5 times 4, and used a NEW disc, but still show me the above problem.
  Will thank you for answer you.

  Thank you
  Jan

  Use please TDK or Verbatim DVD-R media and I think everything will work OK.
  I created the recovery media on several laptops using these media. It works perfectly.

• I get error code 0e01b5-26-00037200 creating recovery disc

  Original title: what is the 0e01b5-26-00037200 error code

  By making the recovery disc received this error code 0e01b5-26-00037200.

  If you have problems with the process of recovery of the manufacturers make recovery disks or their use at a later stage, contact the manufacturer

  It's their recovery process not microsofts

• Recovery creator disc error code: 1100 8-48-00000002. Satellite Pro L300-15

  Hi all.

  Satellite Pro L300-152 of the Vista 32 SP2.

  This laptop was gave me to try to repair (another instance of stolen suicide Vista).
  After retrieving the system (no re - install wasn't necessary), I would like to create a disc of recovery for the owner.

  However, when I try to run the "Toshiba Recovery Disk Creator", I get an 'Error' window with the following message is displayed "an unexpected error has occurred. Exit this application and start it again. (Error code: 1100 00000002-48-8). Of course restarting the application generates another identical message.
  No one knows what could be the cause of this error and how do I create a recovery for this notebook drive.

  Take care of all.

  Mike

  Hello

  This error message usually appears because the non compatible CD or DVD.
  I think you should first check if there is an ODD firmware update.
  On the Toshiba European page driver you might find updates firmware for different CD/DVD drives.

  You should check your CD/DVD drive and a compatible firmware is available, then you need to update this
  If there is no update firmware, then you must try different discs from different manufacturers to create a recovery disk.

• Satellite L500-12 q Recovery Disc Creator Error

  Hello

  I have a laptop Satellite L500-12 q. I used the Recovery Disc Creator to make recovery disks. It needs 4 discs. The 1st was writtenk ok, but on the second, towards the end of the current status, it stopped advancing. It's almost an hour, and it is still not finished. I'm on the second try. The disc is spinning and the drive makes noise as if it was written, but it does not advance at all.

  Please, could you help me?

  Thank you
  Claudiu

  Claudiu Hey,.

  What kind of DVD that you use to create the Toshiba recovery disks? I got also some problems to create a recovery disc but I changed DVD + R, DVD-r media and everything was ok! I used Verbatim discs to create because I have really good experience with this kind of discs. In addition, it seems that TDK discs also work quite well. Check this box!

  If it doesn't work check the Toshiba page for an update of the firmware of your WEIRD!

• Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not work properly

  Hello

  I am trying to create a recovery for my Toshiba Satellite L500D PSLK0A-00U009 disc.
  When I run the Recovery Disc Creator he starts to open then it comes up with a box with an exclamation point, he says: 'cannot open target partition. Then the recovery disc creator will open. It seems normal, then when I insert a CD for the process seems to work then it says error and stop and ejects the CD, the error is that the code is: 0E01B5-26-510444 D 9

  I already uninstalled and then program then reinstalled with the help of a download from the Web MyToshiba site and this has not fixed the problem.

  Any suggestions?

  Hello

  Have you tried different discs from different manufacturers?
  How about you, USB flash memory usage? AFAIK, you can create a bootable Recovery USB flash stick too.

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• Satellite U400-10J - Toshiba Recovery Disc Creator fails!

  I just bought a Satellite U400, and when I try to create the recovery with Toshiba Recovery Disc Creator program disc, I get an error message: "cannot find the HDD Recovery folder on the second disc of the first hard drive. There is no valid disk HARD recovery environment on this computer.

  I haven't changed anything on the HARD drive! How can I create my recovery disk?

  I did a lot of experiences with Vista preinstalled fees and this message is the folder with the recovery image is missing. Is the folder and the data is gone.

  Are you sure you didn't do anything? Has anyone further access to your laptop?

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• Webcam on the Satellite A200-175 does not work - error code 10

  Hi all

  I bought a Satellite A200-175 yesterday and I am trying to use the webcam, but it does not work. I searched the forum for possible solutions, but so far I have not found anything that solves my situation.
  The laptop came with a preinstalled Vista OS, but the software of the webcam was not preinstalled. So I downloaded the latest Toshiba download page doftware and installed.
  Subsequently, it still does not work and so I changed drivers for generic Microsoft (based on the advice of the forum).

  I tried to reinstall drivers (several times), but that did not help. Device Manager keeps giving me the error code 10 (device cannot be started).

  I'm a bit of idea, so any help would be appreciated!

  Hello Franca

  It's very strange because I installed the recovery image on notebooks P200 and U300 (both with the webcam) and I didn't notice any problem. After the first boot the cam will be recognized as new hardware and installed correctly.

  Have you installed some Messenger like Yahoo or MSN and try to use it with one of them?

• Satellite U405D - creator of recovery CD missing

  HI -.

  I can't find the software Toshiba Recovery Disc Creator on my satellite U405D.
  It should be pre-installed, but I can't. I have request for Toshiba Disc Creator, which is the same thing?
  I am upgrading to Windows 7 and I was advised to create a recovery CD and first rebuild the image of my hard drive but, once again, I can't find the program of recovery.

  Can someone help me either

  A: find him, or
  B: another method to create a set of recovery discs?

  Is it possible to download the recovery CD Creator?
  I realize there are already a lot of posts on this, but I can't find anything that specifically addressed my situation.

  Thank you

  Hello

  Your laptop belongs to the Toshiba US series.
  I'm not very well if the Toshiba Recovery Disc Creator software would be preinstalled on the US m laptop models.

  My laptop Toshiba European knowledge have a preinstalled Toshiba Recovery Disc Creator, which allows you to create a recovery disk.

  In any case, you should read your owner's manual for more information, maybe you'll have to use other software or any other method

• Satellite L350-17Z: Question recovery disc creation - problem with calibration

  I'm eager to get win xp instead of vista current on Satellite L350-17Z because some soft is not stable and vulnerabilities, while under xp on the desktop computer, I had no problem. XP compatibility mode is not solve this problem.

  So I decided to do it in a cruel manner as a laptop is new and almost empty, not to mention the habit of hard drive xp. Still I tried to make a recovery, using TOSHIBA Recovery Disc Creator.

  Buta * during DVD burning there is a fault and message about some problems with the calibration. I tried a few discs - same result.

  Hi Snen,

  It would be interesting to know what CD/DVD drive you have. Maybe you should try to update the firmware of the drive. For some readers of Toshiba and Pioneer, the site shows an update of the firmware. It s worth a try!
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  And what kind of DVD that you use to create a recovery disk? I have good experience with the types of DVD - R and I use Verbatim.

• 10-FC06-0002 - HARD drive recovery disc error load XP and Windows 7 very well

  OK, so I have a Toshiba laptop I want to restore because I had used it for school and he had a lot of things about what I didn't need and turned slowly. Rather than take things one by one, I thought it would be better to start from scratch. I jumped in the recovery discs, I created, restarted the computer and booted from the DVD. I have chosen all the settings to restore the computer to out-of-the-box settings and a time window that says «copy files please wait...» "After that the screen disappeared after 10 minutes or so, another window flashes on the screen for a split second (has not yet the chance to see what it was) and then an error window pops up error 10-FC06-0002. The only thing I can do is shut down my computer, and it does not start after that. After trying several times, I decided to come here.

  I know what you say. "Before coming here, search or something, there are tons of problems like that here." Well, I'm looking, and all the results told me to "make a copy of your drive and see if it works, if not its your HARD drive ' tried to make an exact copy of the disk using a tool to copy DVD of Google, no dice. I tried copy the files from the disc on the desktop on disk, did not work. Copied files on an old thumb drive and booted from it. The same problem. Make one. ISO disk image and it has burned, triggered the error as well. No matter how I try to run the restore files, the same error message prevails. This would point to the hard drive being broken, correct? This is where I get lost, Windows XP installs flawlessly and works faster that any other computer I used it, as well as Windows 7 beta does.

  -------

  Does anyone know a fix to this error so I can restore my computer? Should I order new disks of recovery at Toshiba? How much do cost?

  -------

  I created these recovery disks about a week after the computer is turned on for the first time. The only software on the subject was the preloaded software, Mozilla Firefox, and MSN Messenger. These two programs would have caused corrupted recovery discs to bring?

  THANKS FOR ANY HELP IN ADVANCE! : D

  -----------

  EDIT: Should probably tell you some info on the laptop. It is a Toshiba A200 - AH6, try to restore Windows Vista recovery disks created in the Toshiba Recovery Manager.

  Hello!

  To me it sounds like it's your Toshiba Recovery disk is noisy or something else. It seems that the disc can't be read properly.
  I doubt that s a hardware issue because you tried a XP and Windows 7 disk successfully.
  But as Akuma says that this can happen also due a poor quality DVD media.

  In any case, I think you need to order a new drive Toshiba Recovery directly.

  Finally and above all the software that you have installed (Firefox and MSN) didn t cause corrupted recovery disk. Theoretically, you can install what you want before you create the recovery disk. The recovery disk creator burning a disc bootable with the files in the folder HDDrecovery on the second partition. All programs that you have installed must be installed after recovery again.

  Good bye

• Satellite M70 - cannot install recovery disc

  Hello

  I had to remove the drive HARD Toshiba Satellite M70 for use on my Compaq laptop (Compaq HDD crashed). I had to install XP and other stuff after you have 2 left and used with a Compaq laptop with no problems. Now, I had a new HARD drive for compaq and fixed the Toshiba HDD back in.

  Using the recovery CD I wanted to restore the Toshiba to its original state.

  I have the recovery DVD-ROM product. F12 abd selection cd/dvd would not recovery.
  Error loading operating system is the message I get.

  I can even install with my other XP pro original cd.

  Once I put the HARD return drive to Compaq its job very well, I can even install XP.

  What is the cause. Is that it has nothing to do with the MBR?
  I am very familiar with computers so please give me a way out of this!

  Thank you all,.

  Kind regards

  Hello

  In my opinion, the case is clear. If you install the laptop with a normal installation of Microsoft disk and the HARD disk works fine in another computer it something wrong with the Toshiba Recovery disk, maybe it s scratched.

  What you can do is to install the laptop using the disc of Microsoft. Then download and install all the drivers from the Toshiba site.

  Alternative order you a new drive for recovery of an authorized service provider.

  It of your choice what you do. ;)

• Satellite L350 - Question about recovery disc creation

  Help, please.

  I read in the manual for my new lap top before setting up and feel rather nervous.

  The seller said that he had to open automatically when I start it, and all I had to do to install the printer and my word m/s (for example) program and I would be in place and running.

  But it seems that I should first do some recovery disks.
  How many disks is necessary? DVD no doubt - or D/L.?
  The recovery discs are possible after other programs installed?

  Secondly, he mentioned the manual online. Where can I find it?
  I have a scanner and a Seagate external hard drive, but these can be added later.
  I use the laptop as a desktop replacement for my old Mesh PC of five years.

  Thank you for your help.

  Hello

  Yes, it is very important to create the recovery disk before you change anything on your HARD drive laptops.
  When you have completed the installation of Vista, you must start the application called recovery Toshiba disc Creator.
  This application will help you create the recovery disk.

  As I m not wrong not you would need a DVD. I recommend using a DVD-R.

  Notes; in some cases, you might get an error burning the recovery DVDs. This may happen because not all drives are fully compatible. So if you get this error please check different DVD from different manufacturers

  Good bye