Issue suplly of power of the Satellite 1410-303 - need motherboard

Similar Questions

• More than maximum memory on the Satellite 1410-303 (512MB)

  According to the manual the 1410-303 can only install 512 MB memory.

  Wonder just that someone has already tried to install more than that? Currently installed 512 MB, the machine is still kind of slow Photoshop running. Ideally the memory 768 MB or 1 GB. any ideas/experience?

  The machine works rather well, so any plan to get a new one anytime soon. Thank you!

  [Edited by: admin on 22 July 05 18:11]

  Hello

  I try still didn t but friend of mine has had bad experience with it. He has used more than max but just defined by Toshiba memory max memory has been recognized. In my opinion, you can try to use more than 512 MB. I'm not so sure that any capacity to be recognized.

  As far as I know your unit has only 16 MB of video RAM and I'm pretty sure that this low capacity of the graphics card is the reason for slow graphic illustration or graphic editing.

• Satellite 1410-303-the s key is blocked

  Hello, I have a * Toshiba Satellite 1410 303 * and the "s" key is annoying me a lot.

  It does not work either, it keeps on himself. I must + ESC + to stop it. Should I clean under the keyboard? And how there?

  Please answer 4!

  Hello!

  Try to turn off the laptop, press the s key and use the jet of compressed air to remove dirt or something else which is located under the key.

  I hope that it works and if not, I think that you need a new keyboard because it is not possible to Exchange simple keys on the keyboard. :(

  Good bye

• Satellite 1410-303: black vertical banner on the far right of the screen

  Hi all

  I had to format my Satellite 1410 303, and then I added also 256 MB of RAM so the total is now 512 MB. It works fine but the problem is that now I have a black vertical bar, which covers about one inch from the far right of the screen and when you move the mouse it the "offsets" to the right, but the black bar monitor remains in place. Very annoying.

  Also, since I formatted the laptop, I do not have the controls in Toshiba or utility, so I can't change the width of the screen, or perform any other work related operations.

  Your help is very appreciated.

  As a first step, it will be interesting to know something about the pre-installed OS and drivers. I assume that you used your own CD of facilities and the recovery media not original. Am I right about that?

  What drivers you have installed, in particular display driver?

• I want to install the new HDD for Satellite 1410 303

  Can I install the MK8032GAX HARD disk (80 GB Toshiba 2.5 "IDE, 5400 RPM, 16 MB) on my Toshiba Satellite 1410 303? BIOS will detect it?

  Unfortunately there no document on this subject because the HARD drive upgrade is dealer so-called option, and because of this, there is no specific info on the upgrade of the HARD drive. According to the specifications of the laptop, this laptop model comes with 20 GB of HARD drive.

  I'm sure you can use 40 or 60 GB without any problems. About 80 GB I won't speculate, but maybe someone has already tested and will post here in the next few days.

  Good luck!

• Need BIOS 1.2 for Satellite 1410 303

  Hi all Toshiba Satellite 1410 303 users.

  I'm having a problem with my video card bios.
  My computer's DMI system Version PS141E - 0502 X - VIDEO adapter nVIDIA GeForce4 420 Go (Toshiba),

  The victory of Bios 1.40 toshibas page does not work for me.
  So, if someone could make the backup to its bios,
  I NEED bios version 1.20 (THE ORIGINAL ONE for TOSHIBA 1410-303) will be very happy.

  If you could post it to my email [email protected].
  Tounsiiaa

  Hello

  The latest BIOS 1.4 - winner which is placed on the page of the Toshiba driver is good.
  I put t know why you said that this don't work on your Satellite 1410 but older BIOS versions of the BIOS are not available for download.
  I m not quite sure if an ASP technician could help you but it s worth a try to get in touch with one of the ASP and ask for the old BIOS.

• Satellite 1410-303-new CPU does not work

  Hi all
  MI name Fabio, I'm an Italian boy, sorry for my bad English...

  I have a problem with my Toshiba Satellite 1410 303, I buy a new processor (Pentium 4 mobile 2 GHz 512 k 400bus) but it does not work.
  When I turn on my laptop, I hear the system Speaker beep contiunos that never stop until I turn off the system.
  I clear CMOS, and then I spend my BIOS with the latest 1.40 version.

  Do you have a solution?

  Thanks for the help

  Bye!

  Hello

  Have you installed the same CPU than before, or have you installed a different CPU?

  I checked the manual of the Satellite 1410 and he normally equipped with an Intel Celeron CPU processor and in my opinion, it is the reason why it doesn't work.
  Upgrading the CPU is not being official and it seems that the motherboard and BIOS don't support this CPU.
  Check this Toshiba document: http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

  Welcome them

• Problem of monitor Satellite 1410 303 after Windows XP pack 2

  After you install Windows XP Service Pack 2 on my Satellite 1410 303, a vertical strip about an inch of width is lost and remains black on the right side of the screen. Is their a way to fix it?
  Thanks in advance
  George

  Hello

  as a first step, you can uninstall and update your displaydriver of toshiba homepage https://eu.computers.toshiba-europe.com - Support & downloads - driver update

  You reinstall all the drivers after the upgrade to SP2 in the right order? The order could lies in the HTML on CD tools & utilities. It must be done because there may occure problems like yours!

  Try this!

  Pete
  Try this and

• Power on the Satellite Pro 3000 problem

  Wives Satellite S3000 has developed what appears to be a power problem

  Last night it started indicating that he doesn't have the power of the DC input... This seemed to be a fault of internittent stirring casued DC input light to return cable. Taking the DC Jack off main cable, I discovered that one of the two pins was broken.

  Is out today and bought a new 5.5mm/2.5mm DC Jack and reconnected thinking that everything would be OK... but there is no response from the laptop... the DC input light does not come on and neither does the indicator "charging battery".

  A multimeter indicates there is 19v DC decision-making.

  It seems to me that there may be an internal power problem. Otherwise there may be a problem with the power with respect to the current delivery.

  A battery totally buggered may this "non-response"? I expect the laptop to operate on DC power regardless of the internal State and secondary battery.

  Ideas appreciated... will see if I can alternative power source and try it before resorting to delve into the bowels of the thing!

  Thank you

  Hello

  > A battery totally buggered may this "non-response"? I expect the laptop to operate on DC power regardless of the internal State and secondary battery.

  The laptop should run without battery. If the adapter is ok and if it was connected to the laptop, then it should be possible to start the machine.

  If the laptop does not start, then it must be a hardware problem.
  But believe me; It's not easy to say what exactly is the problem.

  Maybe you bought only a bad power adapter that is not compatible with the Sat Pro 3000?
  Or maybe there is something wrong with the electronic power supply on the motherboard?
  Who knows?  :| Only the technician who checked the laptop can provide an exact error diagnostic.

• How to start the unit without password on the Satellite 1410?

  HOW TO SLOVE ON TOSHIBA SATELLITE 1410-S173 PASSWORD PROBLEMS?
  IT ASK FOR PASSWORD AS AON AS I PRESS IT IN

  Password =

  Help, please

  Hello Sam

  If the password is not known to you fair partner in your country can help you.

  Contact with them and they can remove for you, if the unit is not stolen of course.

• Problem of management of power with the Satellite S2430-402

  Every time is start my laptop, I get a message saying "%1 is not a valid Win 32 application" under the heading "E-power", thus the Toshiba power management does not load. I tried to uninstall and reinstall the software from the cd, but it does not work, and I still get the message.

  The problems began after I installed a program called Ghost Surf 2005 and ran for the first time. Since then I uninstalled but still has problems. I am running Windows XP operating system.

  Can anyone help?

  Hi Dan,.

  It seems that the software corrupted a file which is responsible for the powermanagement! There is what we call common files and it can be replace a file, the installation of Ghost surf!

  You can try to solve it with the Windows XP system restore when you set a restore point! Back to a restore point that was resolved before installing the software!

  Hans Bye

• Power of the satellite S3000 - X 4 question.

  I got an S3000 - X 4 to look at, and I can't seem to find the problem. (I searched these Forums and Google before this announcement and can't seem to find a result)

  The Machine lights.

  I had the original power supply, Battery, DVD player and memory. If I hit the power button the camera seems to try to start up, the hum of hard drive noise, the led power and HD light turn green (alternating current is already on), happening for about 5 seconds, then it stops everything and let me just with the AC power light.

  I tried to use a different power supply with the same output (voltage and AMPS), and the same thing happens.

  I removed the battery, just on the AC and still the same thing. This too after the DVD-Rom has been removed, and even I remove the memory and he gave a wipe incase it was a bad connection.

  When the battery is connected, I get a flashing Orange (about 1 second for 4 seconds) I guess that's the charge of the battery? Although my Acer laptop, when he is in charge there is static, I don't know if Toshiba shows differently.

  If I just have the battery connected, and no current it won't start at all, so I think the battery is dead, and flashing errors say maybe the battery does not charge, but with him does not not on AC only, it's confusing me.

  The Toshiba worked well at a time, then the next day, they went to turn it on, and it would be not just turn it on. I thought that it could hiberated, but I can't find a button that he brings back from hibernation. (If that is the question)

  Can anyone shed light on this problem, because I want to help my friend before there to make any money on repairs. (Willing repaired at all, after all the prices for laptops are so cheap now, it might be worth buying a new one)

  Kind regards.

  Hi Paul,.

  from your description of the symptoms, I suspect a faulty motherboard. As you say rightly, the laptop must turn on without the battery in place, so I think that can be eliminated as a possible cause.

  Having removed / clean the modules of RAM as well as the optical drive only hard disc and even if it didn't it should still turn on the laptop.

  Kind regards

• Satellite 1410-303 - CPU upgrade options / tests

  Hello

  Sometimes I have a really rather old satellite S1410-303, which sports a * Celeron processor 1.5 ghz (256 k /400FSB). *

  As I have the latest Bios installed (v1.40 / 03 Sept), I'm curious to know if it would be possible to switch to a Celeron faster, released around this time. I am aware that the CPU should match some criteria, even 256 k of cache / FSB / Northwood arch etc and I was wondering if an update to a Celeron SL75T might work?

  The SL75T is a Celeron 2.5 ghz processor, it's a reasonable bump in speed. Sockets correspond to @478 / mPPGA too.
  The only thing maybe the draw the fate/energy are higher than the amounts

  Any thoughts?

  I am aware this Forum * an Italian guy tried putting a pentium 4 base FSB CPU @400 2.0 ghz in the same laptop computer and it didn't work *. So it seems Celeron only, probably 128 / 256 k cache according to.

  Anyone have a list of definitive of what the BIOS v1.40 supports?

  Thank you, john

  Eh, it's very old piece of hardware, and it is not easy to pick up some info on this.
  What I found is the info the 1410 has been delivered with different processors Mobile Intel Celeron:
  1.6 GHz (1.45volts)
  1.7 GHz (1.45volts)
  1.8 GHz (1.45volts)

  Then maybe you can check if you can find a faster clocked at 1.8 GHz and update.

  Sorry, but everything what s that I can write about it.

• Display failed on the Satellite P100-434 - need to change the boot order

  Hello
  My Satellite P100 suffered a failure of the display last night. I can confirm that the backlight is working but I do not get a display.
  I think it's to reach the windows logon screen, certainly the disc is rotating upward and if I plug an external floppy drive in, the system reads what it wouldn't if it did not clear the message.
  Is what I would try booting from the dvd, but I need to know the keystrokes and above all, the timings.
  I think memory, it's F12 on first boot, but not sure after that.
  Running Windows 7 Home premium.
  Sorry for the lack of information, by making this post via my Nokia.

  > What I would try is booting from the dvd, but I need to know the keystrokes and, especially,.

  Try F2 or esc (it can also be a delete key)

• New HDD for Satellite 1410 303

  Hi, I need to change the disk HARD-1410-303 can someone tell me the max capacity and how physically change the hd on this laptop?
  I indetified HARD disk location, but I don't understand how to disconnect the HARD disk.

  Thank you and sorry for my English

  Hello

  As far as I know, the machine was delivered with 20 GB of HARD drive.
  After a long search I found a 100 GB HARD disk for this device.
  I think that there is a maximum size.
  Check this box:
  http://www.Kahlon.com/rm30859_Toshiba_Satellite_1410-303.html

  Also it is not very difficult to replace the HARD drive. On the site from the bottom of the laptop, you can find the cover of the HARD drive. You must remove it. As far as I know it s a single screw. Then you can remove safe HDD form Bay.

  Best regards