Hard drive could be damaged. CHIP is triggered. Is it safe to use?

Similar Questions

• I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog update saved on thehard d

  I installed lightroom on a new computer (windows 10) cc. I copied all of my original photos on a hard drive and them imported by adding them on the new computer using the import function. I have a catalog to date backed on thehard drive and have tried to insert into the new folder to lightroom. Unfortunately none of my changes, collections etc. seem to be present on the new computer. I still work lightroom with any changes on the old computer where all the photos. Help

  He seemed to have solved this problem - the catalogue of the old computer has been saved as a zip file. Once extracted, it could be used as the primary catalog for lightroom on the new computer

• CQ62-423NR: can I attach a hard drive Sata III of PNY CS2211 for my laptop CQ62-423NR using usb adapter?

  Can I attach a hard drive Sata III of PNY CS2211 for my laptop CQ62-423NR using usb adapter? I have the maximum memory (8 GB)

  Hello

  Yes, you can put any SDS/disc HARD SATA to USB HDD enclosure and you can use it as any HARD drive externally.

  Kind regards.

• I can't use my external hard drive from toshiba on computer in the window, but I can use it on apple.

  I can't use my external hard drive from toshiba on computer in the window, but I can use it on apple. Is there someone who can help me solve it I will be grateful for it :)

  When it is connected to the PC, it is visible in disk management?

  Was this a drive that has been formatted using your Mac with the mac file system? If so it will not turn on the PC, without the use of third party software

• My hard drive is damaged. I got a new hard drive and now I want to reinstall Windows. Can I use my existing product key?

  original title: my hard sucks

  my hard is damaged in some portion.can, I changed the new hard drive and reinstall Windows vista with the existing product key?

  Hello

  Yes, you can reinstall vista with your product key on the new hard drive

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Here's how to do a clean install of Vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• My hard drive is failing to CHIP

  
  

  Hi DahianaB,

  Page 46 of Maintenance and Service of Guide , you will find the reference numbers for compatible hard drives for your model. It also includes instructions on how to replace the hard drive as well. If you have any other questions please let me know.

  Thank you

• Seagate 120 GB external HARD drive could not be detected

  We use Win XP Pro, when you plug the HDD of the promt "Cypress AT2LP RC42" System. How to detect this material?

  In the Device Manager Composite Device failed to start Code: 10

  Hello

  I think it might be 2 possibilities, why it does not work.
  First the external drive is dead and that is why it does not work or there is something wrong with the USB ports.
  Sometimes after installing SP2, the ports will not work.

  For this, I found this Microsoft Knowledge base article:
  http://support.Microsoft.com/?kbid=873169

  I think you should try to connect this USB HDD on another computer, make sure that the HARD drive is not altered.

  My brother uses a with USB cable external HARD disk that supports 2 USB connectors.
  This cable allows you to use the USB ports and dual power.
  I think that's not a bad idea, try using a USB hub with an external power supply and then connect the HDD to this hub.

  Eventually, it helps.

• Responsible for Vista and works fine for about 2 days now, I get the product in use key try AnotherOne coming soon. I have old MB and HARD drive if that can help prove that I only want to use the key on a single machine.

  As noted, my motherboard has failed.  IDE only AGP CPU core.  Not much use trying to find anotherof those.  Replaced the motherboard with a newer version.  It has SATA, multi core processor, etc.  Processor and HARD drive had to be replaced.

  My Vista home premium 32 bit running on my machine for years.  I loaded it on the upgrade with no problems.  Went to windows update and SP1 and then SP2 and all other windows updates suggest and worked very well, for a few days.

  Now, I get a message that the product key is already used and need to buy AnotherOne coming soon.

  I didn't really want to do.

  Ray

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - R3PWW - Q9F83-MPGXJ
  Windows product key hash: V0k0X5Bh6bySPjhN3xP0FNlEfXY =
  Windows product ID: 89578-OEM-7359704-12357
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {694FC5E9-29B3-4912-BE59-B80F163CD007} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6002.vistasp2_gdr.111025 - 0338
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {694FC5E9-29B3-4912-BE59-B80F163CD007}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-MPGXJ89578-OEM-7359704-123573S-1-5-21-4094595745-936093891-605987175Gigabyte Technology Co., Ltd.. GA-990FXA-UD3 Award Software International, Inc.. F5 20111013000000.000000 + 000F1303507018400FC04090409Time(GMT-05:00) Standard is03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_COA_NSLP
  Activation ID: f3acdd3c-119a-4932-a3d7-0b6f33a1dca9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89578-00146-597-012357-02-1033-6002.0000-1272012
  Installation ID: 008920048280820090098534504852850165622866742580089774
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: MPGXJ
  License status: initial grace period
  Time remaining: 36240 minute (s) on (25 day (s))

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEABgABAAEAAQACAAAAAgABAAEA6GHA7Qx13N/cFZRlVPIQM4gsPm + 8 t/L0Yj1Q1KyJrFYgIQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC GBT GBTUACPI
  FACP GBT GBTUACPI
  HPET GBT GBTUACPI
  MCFG GBT GBTUACPI
  MSDM GBT GBTUACPI
  CARPET GBT
  TAMG GBT GBT B0
  CARPET GBT
  SSDT AMD POWERNOW

  OEM copies are not transferable between different motherboards.  The license is linked to the mobo mounted.  You are allowed to reagent a mobo replacement of the same make and model, but not an 'upgrade '.  However, you can try to activate by phone.  An agent can help you.

  Activate by phone.  http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx

  Or click Start and type ' slui.exe 4.

• I have CS5 - need to reinstall after a hard drive change - it doesn't accept my box serial number (as used above)?

  I had my computer upgraded with a new hard drive.

  I temporarily installed CS5 on the "desktop", while the update was made.

  Now when you reinstall CS5 it will not accept the correct serial number on the box provided

  What can I do to make it registered on the computer being updated?

  If you are referring to the external cardboard box which is not likely the serial number.  It is normally located inside on the case/box/CD.  Check your Adobe account online for the serial number.  If you have registered the software, it may be there.

  Quickly find your serial number

• Error: "drive could be damaged, or it could be in a form that is not compatible with Windows.

  Original title: CD - R driver problem please help if you can

  I have a white mark of Memorex CD - R into my drive (D :) and when I try to read it, this happens, "disk may be damaged or it could be in a form that is not compatible with Windows. I have Windows XP on my desktop, any suggestions for help? :(

  Hi MichaelPrincipe,
  -Other recognized CDs without any problems?
  Try to use the CD on another computer and check if it is recognized without any problems.

  Run the fix it tool is given in the link below and check if it helps.

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• I replaced the hard drive in my system. How can I reinstall Windows and use my key to activate it?

  Vista operating system software

  I have a HP laptop running windows vista.  The crashed(non-recoverable) of hard disk and I have replaced the material.  I have a valid license key of Vista code and would like to know if I can download vista and use my codekey to activate it on the original laptop which has windows vista sticker Home premium OEMAct on the back.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact HP and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://h20566.www2.HP.com/portal/site/hpsc/public/help/contactHP/home/?AC.admitted=1340852823523.876444892.199480143

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Pavilion p7-1254: I have added a second hard drive then how closely I put it to the top and use it?

  A year or two ago the original HD died and I took it to a shop and they replaced and now I did know they put in a Western digital 320 GB which is full now. so, I got a seagate 2 TB and have it instaled in the case and now I need to know how to set up? should I move or clone all the info on the new drive, or use both at the same time?

  Hello

  Now, you have two drives, C: and another new letter (e.g. D on your computer.) All new file you save on D:, not C:. After a week or two to settle down, if you want, you can start to move old data/files in C: D:, especially videos, music or old files.

  Kind regards.

• Virus SMART HARD drive - cannot access Admin folder or WF - error 0 x 80070005 using system restore

  original title: need help for the restoration of the system

  I got the SMART HDD virus. I thought that this one has been removed. I can access everything but my admin folder and my Windows Firewall. I tried a system restore but I get an unknown error 0 x 80070005.

  4/11 is also the furthest I can go back when there was an update. Why can't come back all other - can only be hidden by the virus too?

  Hello

  Disabled first happened to scan your system with MSE or another anti-virus program? You have scanned your system with Malware bytes? Before restoration, it is best to make sure that your system is clean. Some viruses will infect the system and also infected restore points, you did.
  MSE: http://windows.microsoft.com/en-US/windows/products/security-essentials
  Malware bytes: www.malwarebytes.org
  If you are unable to run these is normal mode, then try safe mode by pressing the F8 key for the system to start.
  I hope this helps.
  Jim

• Pass water damaged hard drive Macbook Pro (mid-2010) to another Macbook Pro (mid-2010)?

  Someone accidentally spilled water on my MacBook Pro 'Core i7' 2.66 GHz 15 "mid-2010 and after trying to dry out for a few days, I'm sure that the keyboard is in ruins, and it may be worse (I suspect the logic board like most people), but I need to (would really) keep my documents etc. However, we happen to have an another i7 2.66 GHz 15 "mid 2010 Macbook Pro lying around not being used. I'm a student in computer engineering and I'm pretty good with electronics and figure, that I can use the practice, so I was planning on trying to replace the keyboard myself, but I plan on getting a new MBP in the next few months, so I'd rather do less work if possible. MY MAIN QUESTION IS: since I'm very lucky and I have two little nearly exact same model MBP can put the hard drive of the damaged water MBP (also long the HDD no is not damaged by water) in the MBP running? And if so, what would be my challenges and if it works well enough to use for a month or two? Thank you!

  TLDR: I can take a HDD on a MBP and put it in a similar model without too much difficulty?

  Yes, but you're probably better to put in an envelope instead. If you start another Mac, or in an enclosure closed or internally, a very small number of parameters will not be postponed, and some commercial programs may refuse to run.

  (142891)

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!