Hard drive, MOTHERBOARD?

Similar Questions

• Problems of new messages after the new hard drive installed.

  Just had to have a new hard drive, motherboard, and installed video card. Used to be I could click the "e-mail" on my desk and my new email would open automatically when the Windows Mail open. Now, I can't my new e-mail unless I have manually click on the send/receive button. I have the parameters monitored to check for new messages every 5 minutes. What am I doing wrong now?

  Thanks for any help!

  Yes, I use Vista, funny... it's windown help that popped up for me! Sorry!

  It is ok. For most wanted if sure we had dealing with. This is the forum for Vista for the future.

  Vista implemented network, electronic mail and to get online
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  Tools | Options | In general. East: send and receive at startup checked? Also try to set it to 6 or 4 minutes. Send yourself a test message and immediately close WinMail. Wait a minute, then open a WinMail. A little luck?

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Get the old hard drive to work on the new processor

  I am a PC Tech company with problems on PC at home.

  My Win 7 Home Premium Dell Studio T435/9000 dead.  It was a motherboard problem, I chose not to replace the CPU/Mo with a duplicate.  The hard disk MBR is good, I could read it and when I installed in an Optiplex 990 at work, it is initialized.

  I had the chance to receive a new Dell T5610 with 2 CPUs of a parent.  It came with professional Win7 preinstalled on an SSD, UEFI boot on a GPT disk.  But all my apps are absent and even a rat-pack obsessives like me do not have all the CD and install the files for the various applications on the old hard drive.

  I want to use my old hard drive on the new PC, then after that it's stable, migrate the old hard drive to the SS disc supplied with the PC.

  First problem was to learn the differences between MBR and GPT.  After this was learning that Home Premium does not work on a PC with two separate processors.  I use Win7 professional for that.  With the help of this forum, I was able to do this by using the Optiplex 990.  I run Win7 Professional on the Optiplex 990.

  I take the former home of hard disk go BIOS to legacy.  Old hard drive that boots on 990, does not start on T5610.

  I try various advanced options, safe mode, low-resolution video, nothing works.  I get a BSOD is a hard drive error, STOP 040000007 B.

  I try Startup Repair tool and get the following:

  Problem event name

  Offline Startup Repair

  1 6.1.7600.16385

  2 6.1.7600.16385

  5 Autofailover

  6 1

  7. bad driver

  6.1.7601.2.1.0.256.1 OS version

  Locale 1033

  How can I get my old hard drive to work with the new processor.  Is it a question of Dell, a Win7 Office.  As the hard drive starts up successfully on another CPU, I believe that the hard drive is good.

  Thank you very much for your help!

  Thanks to you all.  But the solution was completely different.

  Dell said the motherboard on the accuracy was so different from my old PC that unless I reinstalled Win7 Professional from scratch on the old hard drive, motherboard would not work with the old hard drive.

  They have guaranteed that the old hard drive would work on a 8700 XPS.  After some problems, I managed to do the work.  Problem solved.

• I have blown my motherboard on an old computer and hooked up my old hard drive to the new computer and want to transfer my favorites on the new drive but cannot find where they are located on the old drive - any help?

  My motherboard went bad on my old computer, but the hard drive was OK. I bought a new computer and plugged my old hard drive to it via a usb adapter. I would like to import or copy my favorites from the old hard drive to my new, but I can't find where they are. I was unable to determine the search for articles on the web. Be advised that my old hard drive is basically nothing more than a place of storage for files at this point. My old operating system is windows XP, and my new system is Windows Home Premium.

  https://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Win XP and W2K:
  
  drive: \Documents and Settings\username Windows login\Application Data\Mozilla\Firefox\Profiles\profile_name

• Satellite C660 - compatibility between motherboard and hard drive internal

  Hi, I have a problem with the compatibility between the internal (1 terabyte) hard drive and installing windows 7 pro.
  I broke my old internal hard drive (320 GB) and I bought the new hd (1 tb), but during the installation it says that w7 cannot be installed on this new hard drive.

  Can my pc motherboard (serial number: 3B071014k) support the new hard drive (serial number: wd10jpvx)?
  and if the answer is 'yes', how can I make it work?

  First of all the question has nothing to do with the motherboard and HARD drive compatibility.
  If the HARD drive is visible in the BIOS (first page), the HARD drive is supported by the BIOS and HARD disk controller.
  In the case where the drive HARD isn't recognized, you will need to replace this HARD drive with another. I guess the smaller size of the 2.5 SATA HDD THAT would be taken in charge (500 GB)

  However, in case the HARD disk is visible in the BIOS, you should be able to install Windows 7.
  Before starting the installation, you must format the HARD drive and should create the system partition.
  For this procedure, I recommend to use some tools such as partitions for example: GParted
  GParted is a freeware Linux tool.
  You can create a bootable USB key in order to start the device using GParted:
  http://gparted.sourceforge.NET/LiveCD.php

  Then, you should be able to format the HARD disk and create partitions.

• Work 6 GB/s hard drive IDE oucederomsurlesecondport 3 Gbit/s of the motherboard?

  Hi-
  
  I have HP Compaq DC7700 Convertible Minitowers desktop for home use.
  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=3232028 & SPF...
  
  I would like to repalce the HDD (Seagate 160 GB, SATA 3 GB/s) as its problems donations.
  
  (1) do you think that any disk SSD will work with the above motherboard?
  
  (2) if not, SATA 6 GB/s Hard drive with 3 GB/s port of the motherboard above?
  
  (3) these discs hard SATA2 and SATA3 having the same type of power outlet?

  Hello:

  You may encounter a problem if you are installing a drive not HP SATA III any like I did with my dc7800.

  My PC has the first question appears on the document of support on the link below (even if the dc7800 was not among the list of the PCs).

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken & javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c02711513-3%257CdocLocale%253D%257CcalledBy%253D & javax.portlet.tpst = ba847bafb2a2d782fcbb0710b053ce01 & sp4ts.oid = 3718645 & ac.admitted = 1379354458533.876444892.199480143

  I had bought a HDD WD Caviar Black 500 GB SATA III and every time I want to reboot the PC or several times in a cold, start I'd get a disc hard not found error.

  Of course, I assumed it was a defective and returned for a replacement disc.  The spare drive did the same thing.

  I have a HP 8200 Elite CMT with a Seagate 1 TB SATA III hard drive.  I put this drive in my dc7800 and it worked perfectly for the last two years, who confirmed to me that the support document affects more than the models listed.

  My recommendation for you would be to get the equivalent Seagate HDD which was in my Elite 8200, which is this one or stick with a SATA II if you can find one.

  http://www.Amazon.com/DP/B004IZN3YI/?tag=mh0b-20 & hvadid = 2478383168 & ref = pd_sl_8m29k5ycix_e

• HP Pavilion dv6-6140tx: HP Pavilion dv6-6140tx cable hard drive (the one that connects HD on motherboard)

  Dear members,

  Asking for your help to find the cable from hard drive HP Pavilion dv6-6140tx (the one that connects the hard drive to the motherboard).

  It seems that the cable must have 7 + 15 pins.

  Please help find the right site to buy this cable. I tried ebay, amazon, etc. to no avail.

  Please consider this as an urgent request and help out me. Thank you

  Kind regards

  Vinciane

  Hello

  You need a good part number otherwise very difficult to find/search. If please use part number for drive on the following link and search. This can help

  http://PartSurfer.HP.com/search.aspx?SearchText=QC339PA

  Kind regards.

• MacBook Pro slow and stop, memory or HARD drive or motherboard?

  These last few months my Macbook Pro medio 2012 begins to slow down. I was thinking of a resettlement but has not had the time yet.

  Last month, he really slow started to freeze and stops instantly. It reboots and then I get a gray screen saying with the icon (a card with a questionmark in there) that it cannot find the boot disk drive. I close it again with the button and restart, then it starts normally. This would have me believe it has something to do with my HARD drive or the motherboard, but then again I'm not a tech guy so I guess just really. Then I got the idea to do a test of material, with this error as a result: 4MEM/62/40000000: 0x81d97590

  After searching the Web, it would mean that my memory would be bad/broken. I read in another post to download an app called 'Remember' which tests your RAM. I tried yesterday and it worked fine, nothing was wrong. But today I did once again when my Macbook was slow functioning again and went to do some other stuff. When I came back my Macbook has a black screen, a Word to insert a boot disk. I just stopped and restarted again and started normally. It is a little slow to clear grey screen with the apple logo.

  So my question is, does anyone know where the shoe pinches, RAM, HARD drive or the motherboard? Will also contribute to a reinstall? Can I check if my RAM is always placed properly or is maybe dirty? I use an application called memory monitor for clean working memory from time to time. I'm updating to El captain, wanted to do it instantly when I want to do a clean install on my mac, but I think I'll wait with that I know where the problem lies.

  Really hope someone can help me!

  Kind regards

  Mike

  This was the report on closing down:

  accident report

  Anonymous UUID: 2DD0FAD1-4D38-B739-F019-9F395B5DB6AD

  Sam Nov 28 17:54:55 2015

  Panic report *.

  panic (cpu 0 0xffffff80037c127e appellant): "launchd died\nState to the last Exception:\n\n"@/SourceCache/xnu/xnu-2782.50.1/bsd/kern/kern_exit.c:363.

  News of the UUID:

  uuid = 0x7fff61d7e000

  uuid = 0x108fa1000

  uuid = 0x108ff1000<4396b358-725e-3ec0-bcbb-e4bf75fe1fb0>

  RAX: 0 X 0000000002000001, RBX: 0000000000000006 RCX 0 X: 0X000000010A2800E8 RDX: 0 X 0000000000000000

  RER: 0X000000010A2800E8, RBP: 0X000000010A280190, IHR: 0X000000010A27FF40, RDI: 0 X 0000000000000001

  R8: 0 X 0000000000000000, R9: 0X0000000108FE09F0, R10: 0X00007FFF91399B02 R11: 0 X 0000000000000206

  A12: 0 X 0000000000000000 R13: 0X00007FFF9688D7E0, R14: 0X000000010A2805D0 R15: 0X000000010A280790

  RFL: 0 X 0000000000000206, RIP: 0X00007FFF9139795A, CS: 0 X 0000000000000007, SS: 0 X 0000000000000023

  Wire 0xffffff8021e8a970

  0x00007fff9768fdab

  0x00007fff9768fec8

  0x00007fff976893b4

  0x00007fff9c109a6c

  0x0000000108fcf907

  0x00007fff96a7de73

  0x00007fff96a80dc7

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff80220c1798

  0x0000000108fb8c91

  0x00007fff96a7de73

  0x00007fff96a815cd

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff8021e8a000

  0x00007fff96a8226e

  0 x 0000000000000000

  Wire 0xffffff8021fb15c0

  0x00007fff96a81925

  0 x 0000000000000000

  Wire 0xffffff803a4bd000

  0x00007fff96a8a4e6

  0x00007fff96a8293b

  0x00007fff96a813bc

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a821a3

  0x00007fff942c605a

  0x00007fff942c5fd7

  0x00007fff942c33ed

  0 x 0000000000000000

  Wire 0xffffff8037edb2e0

  0x00007fff8fbeaf1a

  0 x 0000000000000001

  0x00007fff61d8a475

  0x00007fff907537b5

  0x00007fff9765e648

  0x00007fff9688d7e0

  0x00007fff9688fddf

  0x00007fff96a7de73

  0x00007fff96a7e8ca

  0x00007fff9688e0a7

  0x0000000108fcc393

  0x00007fff96a7de73

  0x00007fff96a815cd

  0x00007fff96a81030

  0x00007fff96a813bc

  0x00007fff96a81030

  0x00007fff96a80bef

  0x00007fff96a80a1c

  0x00007fff942c5a9d

  0x00007fff942c33dd

  0 x 0000000000000000

  Wire 0xffffff8025fd2e28

  0x00007fff942c33dd

  0 x 0000000000000000

  Mac OS version: 14F1021

  Kernel version: kernel in Version 14.5.0 Darwin: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Name of system model: MacBookPro9, 1 (Mac-4B7AC7E43945597E)

  an application called 'Remember' which tests your RAM. I tried yesterday and it worked fine, nothing was wrong.

  This is not the right way to think about memory problems. When the test of the RAM ALL said that there is a problem, it's the truth. RAM problems are very difficult to isolate, and a diagnostic runs, but can't find the problem, if NOT "nothing was wrong" which is "he cannot find the problem immediately."

  This isn't a mystery. DIMM RAM, not another thing is more likely to fail. Then you could try Rember running all night, you could try to remove one of your DIMMs and see if chess stops, you can try to get a new DIMM and see if they work better.

• W510: How do I access my data from a failed hard drive after the failure of the motherboard

  I made a mistake and has paid for major .

  This error pouring a drink sweet on my laptop. I know, I know, my keyboard can and protect against damage caused by the spill, but it was a drink together. In any case, I panicked and shut down the system and it has upset and removed the keyboard. And be the impatient person that I am, I made what was probably the ultimate error. I do not give everything save a sufficient amount of time to dry and I tried to boot the system. There is my computer. Or at least I think.

  Symptoms: It began at the start, kept a beep, sometime just close and will start.

  In any case, I guess that my laptop went kaput. Now to the point of this thread. I had not been a recent backup and can't remember when the last backup was actually made. Assuming that my hard drive is ok, I want to get all my data, so I saw several options:

  -Send the system to a data recovery service where I will not pay less than $300, but probably 2 to 3 times what

  -buy an equivalent model laptop and put the HARD drive in there

  -by an external SATA hard drive enclosure and mount it via USB on another computer

  I bought a box external and assembled this evening. I had read about the data access of difficulty with a system non-Lenovo because of encryption of the data. I proved that by linking it to my work (a Dell) laptop and I couldn't access my data directories. If I have access to an another Lenovo Thinkpad, I'll be able to access the data if connected via USB? I had read that I can access the contents of disc hard if it is connected to an another Thinkpad, but I knew not that if it means that I have it connected via SATA connection or if there is work through the USB port.

  I'll appreciate any suggestions for accessing my data.

  Best regards!

  All,

  Thanks for the suggestions.

  I was able to recover my computer and all data on it.

  Just to describe what I have done, here are the details.

  Because of my concern about a failure of the motherboard, I bought a used/given new keyboard and an external SATA drive enclosure. I was not able to properly take possession of the car from my other laptop, but I was able to access the data in Mode without failure. With my data, I plugged the hard drive and the new keyboard in and started without problem.

  Thanks again,

  brent86

• The motherboard Μatx-RS880-H (Aloe) support 4 hard drives SATA

  Hello

  I have a desktop HP Pavilion p6218f with a H-RS880-Μatx (Aloe) motherboard I want to recycle in a NAS.

  He is already running FreeNAS on original material.

  Will be the hardware support, BIOS, etc. Powersupply a 4 additional hard drives, for example, Western Digital Red NAS Hard Drive WD30EFRX 3 TB IntelliPower 64 MB Cache SATA 6.0 GB/s 3.5 "hard drive NAS?

  Thank you

  Lil

  HP Pavilion p6218f Desktop specification
  http://support.HP.com/us-en/document/c01896274

  This computer has a 300 Watt power supply.

  Μatx-RS880-H motherboard specification (Aloe)
  http://support.HP.com/us-en/document/c01925486

  Integrated AMD RAID controller
  Supports only SATA I and SATA II standards.
  https://www.SATA-IO.org/technical-overview

• My computer motherboard laptop disappeared. Connected my hard drive to another laptop but still, no data is found, nor my hard drives are detectable? Very depressing and need the data. Help, please

  My laptop broke down (motherboard, Gone) and is not repairable. The technician took my hard MovieFrame and there is a very important document that I need very badly. I bought a proper case and connected my hard drive to another laptop but unfortunately no data can be found, nor my hard drives are detectable? I am very depressed and need the data. Please helllllllllllllllllllllllllllllllllllllllllllppppppp

  Hi Adel Bushager,

  I suggest you contact the store local tech or the manufacturer of the system to help with recovery of data from the hard drive.

  Hope this information is useful.

• I want to move my hard drive from a computer with a motherboard dead to a newer machine. The activation process for Windows XP SP3 failed.

  I want to move my hard drive from a computer with a motherboard dead to a newer machine.  The activation process failed.  How can I get the operating system XP Professional sp3 reactive?  I have the code original and other info.

  original title: Moving the death machine drive

  Hello CarrolScott,

  The activation problem arose because the hardware on your current computer does not match that of the hardware on the machine whose mother is dead.

  The best option for the reactivation is to use the telephone line. This, unfortunately, is automated and may refuse to turn on your system; However, don't despair just rest on the line after the automated atcivation crossed its procedure and you will be transferred to a real person. Tell this person you've done, and it should be able to help activate.

  See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Upgrade XP to Windows 7. Put my hard drive in my system that has a new motherboard

  I have to update my material, so that I can update my system to windows 7. I intend to use the same hard drive with a new motherboard, processor and other equipment that will be compatible with windows 7. Since I'm on the same hard drive I intend to buy the updated Windows 7 home version. I have a full version of Windows XP Home Edition that was used to install the OS on my current hard drive. Is that I have problems with questions of Microsoft or policy reguarding the software used on another computer when it is really the same computer thanks to the equipment updated, so that I can buy the update of win 7 and get current with the time?

  Hello

  If you wish to format your hard drive, and you use a Windows 7 upgrade version, do not use a program from another software manufacturer to reformat your hard drive before installing Windows 7.

  For more information, see link below: upgrading Windows XP to Windows 7: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-xp-to-windows-7

• Need a code product key for a change of hard drives. I need key product for the motherboard too?

  computer, I took the hard drive was an emachine with Windows XP home. I had another computer in a place away from giving old IBM computers with no working or deleted hard drives. I put the hard drive of the computer and now its wanting a product key code. I don't know where the original XP product key is for the moment. I do not know what is the product key for the motherboard because it was a used computer. If this does not work, what are my options for access to the info on my hard drive another way?

  The license for installing XP on an eMachines computer will be an OEM is restricted to use on this computer. It cannot be moved to an another computer/motherboard.

  If you want to make true on the new computer, first check and see if this computer has a COA OEM sticker on the case.

  If so, then you have use the product key update tool to change the key and then probably activate by phone.

  If this isn't the case, then your only hope is to see if you can find a reputable provider with stock of XP Home and purchase who then use the tool to update product key with the new key.

  http://www.Microsoft.com/genuine/selfhelp/PKUInstructions.aspx

• Installation of Win XP on a new hard drive with the new motherboard

  I have currently baught a new motherboard and hard drive.  I tried to load XP on a new 250 GB Western Digital SATA 2.0.  When you run the Windows Setup program formats the hard disk to NTFS and then said the system will restart and launch the installation.  Upon reboot, new XP starts the Setup program and wants to format the drive again.  It shows her format partition and when I go to format again once it is said that in doing so, I would be deleting files from windows that have already been installed on the system.  Why does this happen?

  Set the BIOS for SATA "Native IDE" then I deleted the partition.  RELOADED windows and the problem has been resolved.  Thanks for the help.