Hard drive support Dell Optiplex 790 (installation SSD 2.5 ")

Hello

I intend to install a new 2.5 "SSD in my Dell Optiplex 790 (mini lathe). Unfortunately, the original hard drive carrier (3.5 "?) was lost.

As the number of hard disk media (Dell) is quite overwhelming me, I would be very happy to help to find the bracket.

Laborec

DN8MY = set of support from Caddy drive 3,5 '' hard
R494D = support for 2.5 hard drive Caddy Assembly "

Tags: Dell Desktop

Similar Questions

  • install SATA drive for dell optiplex 170L

    Cannot install a new SATA hard drive in Dell Optiplex 170 L.  Windows XP Pro SP3 cd cannot find the hard drive. Need help please.

    Hello

    This problem is related to the installation of the equipment, I would suggest you get in contact with the system manufacturer for assistance that you need the BIOS (Basic Input Output System) Setup to install the new Windows XP SATA drive. Will also need you a floppy drive to install the new SATA drive.

  • Lack of Dell Optiplex 790, PCI Simple Communications controller driver

    Performed a clean installation of Windows 10 Pro on my Dell OptiPlex 790.  Everything went well and all device drivers have been installed except one, the Intel AMT - GROUND device.  The vendor id is 8086 and the device id is 1C3D.  Can help you with this question?

    Thank you.

    -Jim

    It seems that it is the Intel Series driver LAN.  Your computer was never tested by Dell for Windows 10, which means there is no new driver created by Intel, etc., that can work.  You can google Intel AMT/GROUND and see if Intel has a driver for your chipset that can work.  It looks like Dell stopped supporting your computer for Windows 8.0

  • (Redirected) Cannot boot from the HARD drive on dell n5010 with SSD and HARD drive installed

    I have my old dell n5010 (15R Inspiron) with SSD (Samsung EVO 840 120 G) installed on the main drive Bay and the HDD (Samsung HJJ 500 G) on the optical drive Bay.

    It is a typical way to add an SSD on such an old laptop (bought from dell.com.cn in 2011).

    My Windows 10 operating system has been installed on the SSD using Samsung Data Migration software, so the previous C drive was pointless. So I formatted and installed an operating system Ubuntu 14.04 on it, hoping the grub OSs double beginning located on the HARD disk.

    However, I find no the Dell bios boot option to boot from the HARD drive installed in my optical drive Bay. All the choices are 'Hard Drive', 'Network' and 'Diagnostic '.

    But I was definitely sure that my bios program has detected the SSD and HDD with information on the main menu of the bios.

    And the LED on the optical drive Bay was immediately once I pressed the Start button on my laptop.

    As a general rule, all things were right except for options of the bios boot.

    Is there a way I can boot from HDD (with installed Ubuntu) while remaining has my SSD on the main drive Bay? I don't want to swap their positions, because the SSD is super fast on the main drive Bay.

    I have alse won't migrate 10 Windows to the HARD drive and reinstall Ubuntu on the SSD, because I'd like my windows be loaded quickly.

    Someone at - it the same problem with me?

    Any suggestion is appreciated!

    As you have a laptop, better make this laptop in the computer Forum post here:

    http://en.community.Dell.com/support-forums/laptop/default.aspx

    Bev.

  • ESXi install on dell optiplex 790

    Hi experts,


    1A tried to install Native Vmware Esxi 5.1 OS on Dell Optiplex 790, reported Installation Wizard not found supported network cards.

    2. I tried Esxi custom Dell installation 5.1 on the same area, then received the same error message.


    sounds like network drivers is not included in both of the Esxi Images, any idea on this issue.


    Error message 'no network adapters detected' when installing ESXi on Dell PowerEdge servers 12th generation - Dell Dell TechCenter - TechCenter community.



    Dell optiplex 790 got the intel pro 100/1000 cards.


    Even when I installed RHEL, it's the same thing, but fortunately RHEL does not stop in the Setup Wizard if the card is not supported. After the Installation of OS RHEL. I installed the e1000 driver. It works very well.


    VMware should have the same opportunity to install drivers after installing ESxi OS.




    If you do not have a suitable driver for the specific NETWORK card package, you can use Image Builder to create a custom ISO Setup / CD. Take a look at http://www.v-front.de/p/esxi-customizer.html , which greatly simplifies this task.

    André

  • Upgrade hard drive HP Pavilion Sleekbook 15 to SSD

    Hello

    I have a HP Pavilion Sleekbook 15 with the following product information,

    Product name: HP Pavillion Sleekbook PC 15

    Product number: C6K58EA

    Will it be possible for me to upgrade my hard drive with an SSD? If so, what are the limits of the SSD that I can use?

    Thanks in advance,

    ISURU.

    Yes. You can upgrade the hard drive to a mobile (laptop) SSD. The SSD must conform to the following specifications.

    Hard disk, without illustration material, Kit (includes hard drive support and support)
    screws, cable and 2 bumpers) HP p/n 701945-001

    If your laptop is also a present SSD 32 GB mSATA, he can line be used as a disk cache via the software Intel IRST.

    The disadvantage is that it is that it will violate the guarantee that the hard drive is not known by HP to be part replaceable enduser. Upgrading a laptop of this type implies a disassembly.

  • Audio driver for Dell optiplex gx 620

    I need Audio driver for Dell optiplex gx 620 for windows 7 64 x

    Go to http://www.dell.com, click Support at the top of the page, select support for individuals, then drivers and downloads and finally put the number of serial number of your computer.  Downloads to be there.

  • I want to Exchange my hard drive of my iMac for one SSD. Existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

    Oh, I of course put the whole issue in the reference line.

    I'll repeat it here.

    I want to Exchange my hard drive of my iMac for one SSD. The existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?

    Thanks, Thomas

    Transfer facilities of Adobe does not normally operate.  You must reinstall using installation files.  At a minimum you must disable, but you may find that you need to uninstall and reinstall.

  • You can put a Dimension 3000 hard drive in an Optiplex GX240? [PLEASE ANSWER!]

    My dimension 3000 has the blue screen of death. [stop: 0x0000007E] and let me know if you can put a dimension 3000 hard drive in an optiplex GX240

    GX240 has LESS RAM than a dimension 3000.  You cannot run in a GX240 without reinstalling total.

    STOP: 0X0000007E (0XC0000005, 0X804E518E, 0XFC938104, 0XFC937E04)
    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

    A device driver problem or malware

    • If this issue occurs after the first restart during Windows Setup, or after installation is complete, the computer may not not have enough ram to run Windows XP.
    • The BIOS of the computer may be incompatible with Windows XP, or it might have to be updated.
    • The video card drivers may be incompatible with Windows XP.
    • A system service or a device driver may be damaged.
    • If the problem is associated with the Win32k.sys file, it could be caused by a third-party remote control trojan malware program.
  • Dell optiplex 790 and windows 8

    Hello guys

    What is windows 8 pro compatible with Dell optiplex 790?

    Are there problems with it or not so if I buy windows 8 pro 64-bit, how can I install the drivers?

    Hi raedov

    790 OptiPlex systems have been tested to support the upgrade of Windows 8. The 790 does support upgrading to Windows 8. You can also visit the below mentioned link for more help:

    http://Dell.to/XS5X49

    Before moving to windows 8, you can also run the Windows 8 Upgrade Wizard. It scans your current PC to see if it is ready for Windows 8 and provides a compatibility report and optional steps to make you buy, download and install Windows 8. Please click the below mentioned link to download the Advisor:

    http://bit.LY/Sz6gJP

    Regarding your second question I'll get back to you within 1 or 2 days.

    Please let me know if additional assistance is needed.

    Thank you & best regards
    Prateek K
    #iworkfordell

    For easy access to the drivers, manuals and updates, please visit our Support site  

  • Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!

    Ugggh.  I have a 27-inch iMac late 2011 and the hard drive was updated with a new SSD.  The integrated cd/dvd had to be taken out.  I then bought a thought of superdrive, it should work.  It's frozen on my iMac!  Gee, who could have possibly guessed that would happen?  I tried all kinds of silly workarounds, I found on the internet, but still it will not register the stack of DVDs and other discs I have.

    If you're like me and upgraded your iMac that came with a cd/dvd drive internal... so he has to come out to give way to the fusion or the SSD drive, do NOT buy the apple superdrive.  It will work with your computer!

    Think I'll get a laptop samsung...

    Ironic, isn't it? Own Apple SuperDrive will not work with Apple computers. Shame you don't check here first that we would have warned you. Return Apple overpriced and buy a nice third-party player for a third of the price. I love the LG units. You can consider a loading plate because they are more reliable, and you can use these pesky disc when you get one.

  • came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

    original title: lack of games
    I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

    I have no games. No solitaire, Minesweeper, no nothing.
    How can I, without seeking to erase and reinstall again?

    To activate the built-in Windows 7 games:

    1. click on Start (lower-left) and then on Control Panel.

    2. click on programs and features.

    3. on the left side of the screen, click on 'Windows turn features on or off".

    4. find the entry called games & check the box next to it.

    5. click on OK.

    6 reset.

    If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

  • Support MacBook Pro OS 10.7.5 using Time Machine on hard drive external & Clean install on new SSD capital El

    I ordered a new SSD to upgrade my 2011 MacBook Pro that runs on OS 10.7.5. I would like to install own El Capitan on the new SSD. Can I save my current hard drive using Time Machine and an external hard drive and then re - download my old stuff in the new SSD? Is this possible at all?

    Basically, I want the new SSD to be as clean as possible. Obviously, I would only the files and applications on my computer current to be transferred. I would be grateful and recommendations on the best way to do this. Thank you.

    Look at these links for orientation:

    http://pondini.org/TM/19.html

    http://pondini.org/TM/5.html

    I would format the new SSD in Mac OS extended (journaled), personally Run Time Machine to install your data and then install El Capitan.  In the end, it's your decision.

    Ciao,.

  • Replacement 250 GB C: drive in Dell Optiplex GX 620 with WD 750 GB SATA drive by cloning. BIOS sees the drive, Windows XP does not work.

    I have 5 Dell Optiplex GX 620 desktop computers.  All are about 5 years old.  Had a hard drive failure so I replace the disks C: by secondary SATA disk cloning, disk 1 in the bios.  BIOS sees drive when Windows XP on two systems and not on the other three.  Have no idea why.  All rooms have all the updates of Windows and Dell. A bought WD Caviar Green drives.  WD has replaced three with Caviar Black readers and still does not work.

    Level 2 support WD had response which was to creat Acronis True Image WD Edition BACK boot CD for the windows version of the software, (that I downloaded on www.wdc.com), boot to a CD and had the disc I cloned then.  I wish only the support level 1 guy was aware of this utility.

  • Reinstall XP OEM on Clean Hard Drive, but don't have installation disk

    I have a Dell Inspiron and it's just a user.  There is no bling for this laptop; built in ' 05, 40 GB HDD, 1 GB of RAM.  Supplied with Windows XP Home Edition on it.  I still have the product key.  However, I don't have a installation CD of any or anything of that nature.

    I recently wiped the HDD using DBAN, and I want to reinstall XP on it, using the existing product key.  This seems to be a trivial task, but I can't find anything on the net resettlement on from scratch.   I will be very put out if I did know that I have to buy a copy of the operating system.  That doesn't seem right, because I took the operating system out, I should be able to put it back on as if nothing happened.
    Basicall I'm looking for is a copy of the operating system to install on the HARD disk, where I can then put in the old key.

    you tell me, that even though I HAD a version of legitimate XP, when the circumstances where should, say the hard drive died and was unreadable and had to be replaced, it is impossible to reinstall an OS what I already purchased?

    No, you went just about this the wrong way.

    The seller of a computer came with Windows pre-installed is bound by the terms of its license with Microsoft to provide to the end user (i.e. you) with a way to restore the operating system.  A 'direct' (like Dell) OEM, it can do so by providing a restore partition hidden on the disc (which you wiped out if you said DBAN to wipe the entire drive) and/or a mechanism to restore on CD (which you apparently do not have).  The latter can be a 'true' Windows XP CD or a sort of 'restore' CD particularized.

    Since you have a Dell, you should get in touch with Dell support, who can (or cannot, given the fact that XP is no longer for sale) be able to provide with restoration of the media for a fee.  You will need the printer Dell 'service number', which should be on a label stuck to your computer.  See, for example, http://support.dell.com/support/topics/global.aspx/support/my_systems_info/en/details?c=us&l=en&s=hied

Maybe you are looking for

  • Satellite A60 - very slow USB transfer speed

    Hello I have a Satellite A60 with XP Home and the USB transfer speed is very very low. Is 2.0, but it is not working properly, because it takes about 30 minutes to copy the data from 1 GB on a USB 2.0 drive externally. I tried my USB drives on anothe

  • Pavillion dv7 recovery not work

    I got my recovery disks (both disks one and two and the driver and application disks) to retrieve my dv7.  I tried several times to have the work of recovery.  All files seem to copy on the hard drive ok and I inserted the disc Driver and Application

  • Photos of the tablet with the photosmart

    How can I get my pictures from my samsung p5100 tablet to my hp photosmart a516

  • Problems with opening the downloaded programs, specifically Photoshop 7

    Hi, my Adobe Photoshop 7 suddenly stopped opening. I googled the answer to that is: c:\documents and settings\\application data\adobe\photoshop 7.0\adobe photoshop 7.0 settings. After that, it is said to remove the preferences file in the system fold

  • Multi-router multi-homing with PfR

    I am trying to set up a connection to edge where we are served by two Internet service providers, each connected to an independent router in our site (i.e. ISP-1 connects to R-1, and PSI-2 connects to R - 2).  We eBGP peer tables full with each ISP a