hardware device Wem Cam APP-TECH

Similar Questions

• Camera App in WIndows8 does not work

  I recently bought an ASUS TP300L laptop, it works perfectly well until the camera app no longer works. I tried to go to settings, then Manager of devices, however, whenever I open the camera application and its settings immediately, he goes out and so is its parameters. That said, I can't even start to fixing or troubleshooting because he always turns where minimizes immediately. I did not any changes to the laptop or all facilities since its just new. What should I do? What could be the problem?

  You are connected to the pc via a USB port. Try to update the pc hardware

  drivers/software, they controll USB/network/etc.

  If intel based, go to intel.com/support/drivers/software

  Run the update utility from intel, it scans any pc processor intel for updates, or locate

  manually through the Download Center, the chipset software

• the iPhone camera App is not memorize the recording mode

  Hello

  I use the default photo from Apple on my iPhone App, especially because I can shoot while the iPhone is locked. No other applications can do that, not even using the Notification Center (other applications for registration as Strava can do it, but not to record video).

  However, I noticed that most of the time (but), mode (video, panorama, photo,...) is not like it was before.

  I turn almost only videos (idling, when outdoors). Whenever I start the camera application, either in the "sweep upward" screen (locked phone), or from the home screen in unlocking the phone, the camera always (or almost) default is still Photo. I have not found a way to default to the video.

  When you have to take action, it is very annoying to have to fumble with the buttons until you can actually draw. Not to mention that the app is so slow that initialize in the meantime, you cannot drag on the video mode (until the camera is completely initialized); then you drag too and the video mode Miss... it's a mess...

  However, sometimes, apparently when you start the camera after making a video, the unit starts in video mode... but you expect it to start in photo mode, you can already drag by anticipation and video mode Miss yet :-)

  The behavior is not very consistent.

  Unless there is something that the camera behave correctly, I think apple should seriously improve at least 3 things in the camera application:

  (1) in previous versions of iOS, the initialization of the camera was not otherwise slow. How about you do it as fast as it was before?

  (2) pass from still photo to video, then to move slow takes too long. The control must be more effective and faster. You should have a faster and more direct access to the different modes of recoding. How about a configurable "by scanning screen?

  (3) the camera app to set the frequency of default images for videos. What about settings for the default recording mode? (video, panoramic)

  Hi there redtomato,

  I understand that the camera on your iPhone app will automatically in video mode you want. If I always had to take videos, I think it would be very convenient to open the camera in video mode application every time I opened it.

  I tried what you said on my end, opening the camera my screen lock and video mode change application then blocking of my iPhone, and then repeat the same steps. Surprisingly, when I conducted my test of the camera to video mode application.

  I'm quite uncertain that if if it is a small problem with iOS, or if it was something that apple designed specifically, or maybe I'm just having chance repeating the steps you mentioned. To help troubleshoot your device, I recommend you to make sure that you use the latest version of iOS if your device is up to date. Once you have done this, try to restart your iOS device and see if you're still having problems.

  On reflection, maybe you can force the camera app to quit smoking? If this is the case, this could explain why you may need to manually change the camera in video mode application each time.

  I think your suggestions are great ideas, and if you want too, you can submit your ideas to Apple directly here: http://www.apple.com/feedback/.

  I love my iPhone and I like the camera on it and especially photography, so I can understand how you feel about the inconvenience, but I really hope the information I've provided help it it, otherwise, if all goes well it will be or is somehow.

  Continue to take great videos!

• computer fails to install the hardware device connected to USB

  computer recognizes the new device but said device is configured incorrectly (code i1) It does not install the driver for the device. The USB port works OK with a mouse and a printer. It will not install the items include a wireless, software modem mobile camera and flash drives. All these work OK on another computer. It seems that for some reason any driver is not installed when connected to the defective computer. The driver file to be installed is c:\windows\system32\drivers\usbstor.sys

  Hi dorothy.k,

  1. did you of recent changes on the computer?

  2. What is the exact error message that you receive when connect you these devices to the computer?

  3 - is the first time that you connect these devices to the computer?

  4. the other computer have also Windows XP installed?

  Method 1

  See the link below and run the fixit tool available, check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2

  Check the status of the device to the computer by using the Device Manager and later, see the Microsoft article below and according to the error code try the steps mentioned in the article.

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

• USB keyboard & mouse error "Windows cannot start this hardware device - code 19.

  Original title - USB keyboard & mice problem

  Hello

  I'm under 64-bit Windows 8.

  Problem: Keyboard Logitech wireless & mouse (S520) does not work.

  1 week ago that I tried my HARD drive on different USB ports on my PC. I disconnected the keyboard and mouse wireless receiver and reconnected. Since then he has stopped working.

  In Device Manager, it has a typical yellow marks against HID keyboard and mouse. I tried to uninstall and reinstall, off and on, makes no difference.

  When I go into the properties by right-clicking, the status is 'Windows cannot start this hardware device Code 19'.

  I tried Googling this error but I found that the solution is only for CD/DVD problems.

  I uninstalled USB Root Hub that is not made any change in the problem.

  Have restarted severl times and power disconnected from the PC and thus reloaded.

  I am currently my PC from iPad using the app Splashtop.

  I really hope that someone can help me.

  I've restored my windows from 16 April that solved the problem. However, I learned a lot about the registry keys and all.

  Thank you for taking the time from your busy schadule and answer my stupid questions.

  Thank you.

• photos of iCloud in Photos and camera app

  Since coming to iOS X and Sierra when the photos are downloaded from Photos on the cloud, they appear on my phone in pictures as well as my photo app. If I delete my photo app, they disappear from the Photos app as well. I had never planned on camera as being a place of storage for all my photos. One is enough. Any help solving this would be appreciated

  Turn off sync iCloud in the camera app.

• Camera app missing

  The camera app is missing from my iPhone 6 s. I don't have an idea how it happened and how to restore

  Check the Restrictions

  1. Open "settings".
  2. Select 'General '.
  3. Select "Restrictions".
  4. Make sure that the 'camera' is not limited. It must be on 'On '.

  You can reset the layout of the home screen: settings > general > reset home screen presentation

• I have Iphone with SER. DN number * RY9. I want to know the number of hardware device.

  I have an Iphone 6 with number of ser: DN * RY9. I want to know the number of hardware device. Is - this samsung or other?

  Thank you

  < personal information under the direction of the host >

  Please, do not post your serial number i public forum na.

  There is no way outside of disassembly of the iPhone to see what kind of CPU, there is a, nor is it important. Both processors are made to the exact same specifications and perform exactly the same.

• iPhone Camera Apps

  Is there an alternative enforcement camera ios, which will offer the possibility to open the mode 'video? I need to use the video a lot and now I need to use the camera app standard (which open always s on the image mode, which then requires me to select the "video" mode before I can start recording).

  If I could find an application with an option directly on the video mode, I could start much faster recording and don't miss some crucial documents.

  Thank you very much

  iOS has a "quick access" option to your camera. You have even to unlock the iPhone. She remembers and opens to fashion as last use, such as video.

  When your phone is turned off, click on the power side button. The lock screen resulting has a small camera icon in the lower corner on the right. Move the cursor to the top. Press the Red record button.

  

• WEBCAM HP HD 3100 want support for windows 8 pro camera app

  Hi, this is first time I write a post, because I am not able to find any support for my HP WEBCAM HD 3100 for windows 8 pro , with windows 8 I have a camera app name , and what problem I face is that whenever I want to use my webcam with this application, the error message has just been not detect camera , I went for the support of the windows forum 8, they said to refer to the manufacture for driver problem, and there is not the issue, that the software HP HD 3100 driver installation is ARCHSOFT and ARCSOFT I VISION which I had already installed on my PC, the webcam works perfectly with other services webcam chat webcam with another application , Its just that it does not work with the individual CAMERA app.

  Please tell me what I can do to remove this problem with the camera application.

  Respect of

  Amit

  Yes, it is compatible with Windows 8.1 since it works in my laptop even without installing the supplied software suite. I had to install it for Win XP but win 8 pilots inside to operate the camera. Try it on a different usb port. Remove and uninstall the software from the Control Panel programs and do a system restart. Let the appliance must be installed by windows with it is in built drivers. This would remove any incompatibility between Windows and drivers you have installed.

• HP au003tx: blurry photos of the camera app

  Recently I bought hp au003tx laptop.camera app watch too blurry photos and vedios.how I can fix it.

  @babadt

  System:

  HP Pavilion 15-au003tx

  babadt wrote:
  Recently I bought hp au003tx laptop.camera app watch too blurry photos and vedios.how I can fix it.

  What is the name of the application that you use to display pictures?

  What is the name of the application / / program you are using to view videos?

  In general, the programs that are included for free as part of the standard Windows Operating System 10 are adequate without necessarily being "best in class".

  No matter what you use now, there are alternatives to the native products installed on your computer.

  You can choose to download / buy tools that meet your standards.

  Examples:

  The best free alternatives to the default Windows 10 applications

  How to enable the Windows Photo Viewer in Windows 10

  Three impressive alternatives to Windows 10 Photo Viewer

  Video player VLC vs Windows 10

  10 best video players for Windows 10

  Comment

  All programs and applications that discovered the Photos and allow you to view videos are dependent on the ability of your computer to display the content in a high enough resolution to make the Visual result is pleasant to the eye.  This means that your computer must be able to display the content.

  The specificationsindicate that your computer has a resolution of 1366 x 768; This limitation can lead to (seemingly) minor gaps when you try to view certain types of HD content (very high density photos and videos).

  Good luck.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• CD/DVGW SN - S082D question - Windows cannot start this hardware device Code 19

  I've had my laptop for a little over a year now and it's had its fair share of problems, which most is repairable or there is a solution.
  Earlier today, I inserted a disc in the drive and tried it opens, went into "My Computer" and find the disk was not displayed.

  It's happened a couple times and a simple reboot fixes the problem.
  I rebooted twice and this time, that the problem was not fixed, after going in 'Device Manager', I found there was a problem with the device and he gave me the following error message

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  As usual "search for the solutions" is useless and doesn't return any results.
  Thanks in advance for any response.

  Some info that may help
  OS: Windows Vista editions Home Premium
  Laptop model / number: Medion MD 98300
  DVD drive: TSSTCorp CD/DVD W SN-S082D ATA Device

  Thank you

  First of all, I wonder why you post this here in the Toshiba forum if you don t have a Toshiba laptop
  It's a little strange for me... anyway I'll try to help you.

  It seems that the registry keys are corrupt and so your CD/DVD drive does not work properly.

  Just try the proposed solution mentioned here in the doc of Microsoft:
  http://support.Microsoft.com/kb/270008/en-us

  Good luck

• How can I see which device downloaded an app?

  How do I know which downloaded camera app?

  What you mean?

  App store Mac download on your Mac.

  Download iPhone app store on your iPhone

• K4 Note-Lenovo snapit camera app

  I noticed k4 hv. But I don't know where I get snapit camera app

  Comment to Moderator: The model is added to the object for clarity.

  Do you mean the default camera for Lenovo Vibe so soft?
  If so, it is a same camera app in note K4

• No puedo instalar hardware device Epson Stylus Photo T50 y el problemas windows solucionador no lo can reparar una respuesta por favor Necesito UN

  No puedo instalar hardware device Epson Stylus Photo T50 y el problemas windows solucionador no lo can reparar una respuesta por favor Necesito UN

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page for answers click v (English) in the United States and set on your tongue.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">