Hardware migration - how to enable the support group to perform this task

Similar Questions

• How to enable the Support of Legacy desktop Z240

  Hello

  Does anyone know how to activate the legacy on Z240 workstation support?

  Under "secure boot configuration" in the BIOS I chose "Legacy Support enable and disable start-up secure", but after I save and reboot, it reverses to 'disable Legacy Support and allow to secure boot.

  Any suggestions please?

  BIOS version is 1.24, which is the last.

  Thank you very much

  I thought about it later.

  When you disable "Secure starting" or any other option in the BIOS security, you will be asked to enter the 4 digits to restart.

  I was typing the 4 digits while having "num lock" so while I thought I was typing the numbers, the BIOS would not accept the changes simply because what I was typing was 'empty '. Make sure you actually see the numbers, you are required to enter the screen.

  

• How to get an answer from the support group?

  I tried to get help actually download Adobe elements.

  When I put in my details for the purchase - the system says "system error". I called the support group and was told that the charge on my card has gone through and that they were awaiting a response from my.

  I asked him 'what response' and since this time - nothing!

  Not happy... and it now lasts over two days and several entries for customer...

  I'm open to ideas - or I can download it, or cancel the transaction.

  Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• Satellite L500 - how to enable the WLAN?

  I replaced a hard drive of mine (L500 PSLS0A - 08 p 002) and I installed Windows7 64 bit on it.
  I used to market its WIFI by pressing the FN + F8 keys.
  But now I can't on it using the method.
  I downloaded its end drivers.
  In reality its all the function keys do not work.
  Please let me know how to enable the WLAN and function keys.

  Hi kim2kjy,

  You have installed Windows 7 Toshiba or normal Microsoft disk recovery disk?

  The FN keys to install Toshiba Value added Package, and Flash Cards Support utility. These two tools can be downloaded on the official page of Toshiba.

  Check this box!

• How to remove the support contact at screenshot using the "home" button

  guys, please help, how to remove the support contact at screenshot using the "home" button? I use 6 s ios 9.2, but when I take screenshot with the menu help key, the help key disappear on my photo, but the problem is, I want to take screenshot with my home button, please help... Thank you

  What turned the problem into a screen with the home button? Quickly, you press the power off button and home together and release - if the sounds are enabled - you should hear the camera shutter sound and have the capture in your app screen shots. The help key is not displayed

• How to enable VT support on new HP Compaq Elite 8300?

  I received my new small form factor desktop - HP Compaq Elite SFF 8300.

  It comes equipped with Intel Core i7 - 3770 Quad core CPU @ 3.40 GHz processor.

  According to the site web of Intel, this processor has the full support of VT (virtualization), however, when I install the VMware (ESXi) product, it tells me that VT is not enabled and I need to enable it in the BIOS.

  I tried to get into the BIOS by "ESC", but I don't see an option on how to enable VT support. I installed the latest available BIOS too, it did not help to unlock this option.

  What do I need enable VT support on my computer?

  Thank you!

  DM

  Hi, DM:

  On my 8200 Elite, the option enable the VT is in the Security menu.

  I think it would be the same on the 8300 elite.

  Paul

• How to enable the continuation of the Standby Option for a USB mouse: I do not see the "allow this device to wake the system from standby mode' check box__

  I use Windows XP Home Edition and I am fully up to date with the latest version of the software.

  I would like to activate my mouse USB power out "sleep mode" on my computer.  I found the help topic that describes how to do this: http://support.microsoft.com/kb/280108 how to enable the continuation of the Standby Option for a USB mouse

  However, when I follow these steps, I don't see the 'allow this device to wake the system from standby mode ' check box on any of the windows as described in the documentation for Ms.
  I use a Microsoft Comfort Optical Mouse 3000 (IntelliPoint) USB

  Any help would be greatly appreciated!

  This gives a test:

  1. click on START
  2. click on 'run '.
  3 type "notepad" (without the quotes) and press enter
  4. copy and paste this into Notepad:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb]
  "USBBIOSHACKS" = DWORD: 00000000
  "USBBIOSx" = DWORD: 00000000

  5. click on file > save as
  6. change the dropdown to "all files".
  7 type usb.reg as the file name and save the file somewhere easy to access
  8 go find the file and double click it. Confirm that you want to add it to the registry
  9 restart the computer and see if you can wake the system from standby mode

  For reference, take a look at this:
  http://www.dslreports.com/Forum/r19635912-missing-power-management-tab

  Let us know,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to enable the automatic configuration service in Windows XP

  How to enable the automatic configuration service in Windows XP

  Hi SamuelOkon,

  Are you facing any problem on your computer?

  You can follow the steps in this link & check if it helps.

  How to activate the Wireless Auto Configuration startup type?

  Hope the helps of information.
  Please post back and we do know.

• How to enable the ReadyBoost feature?

  I would like to know how to enable the ReadyBoost feature.

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  I would like to know if it is possible to assign an SSD internal to do this instead of using a USB drive or not.  I tried ReadyBoost option in SSD drive is not available.

  Do you have any suggestions?
  Thanks a lot for your suggestions :>

  Hello

  Sorry, but you cannot use an internal hard drive for ReadyBoost. Indeed, an SSD can not use ReadyBoost.

  This feature can use a USB flash drive external as a hard drive cache to improve the disk read performance.

  More information on the following links.

  Understand the ReadyBoost and the question of whether it will Speed Up your system
  http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

  Turn ReadyBoost on or off a storage device:
  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Concerning

• How to enable the remote desktop on windows 7 because it is missing in system properties | using Remote tab

  How to enable the remote desktop on windows 7 because it is missing in system properties | tab use remotely.

  I am running Windows 7 Ultimate edition with service pack 1.

  I used to connect my mac via the desktop tool to remotely (2.1) on my mac to my pc windows 7.

  Now, it does not.  Check the services of windows 7 I have ensured that all the remote control * services are enabled, but I still do see the Remote Desktop option in system, under the remote settings properties.

  Any help would be appreciated.

  MasterJay1

  Click Start, click Help, and then type this phrase in the search box:

  enable remote desktop

  Article 5 will have explicit instructions for the task.

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.

• How to enable the CDI an area of weblogic (not IntegratedWeblogicService)

  I created a project with IDC in Jdeveloper 12.1.3 and it works very well in IntegratedWebLogicService. I deploy it as a WAR file to a weblogic domain. However, the jsf pages cannot get the value of beans and just show #{items.smallest} , #{items.biggest}.

  How to enable the CDI in a weblogic domain base?

  Thank you very much.

  CDI is not an option available on Weblogic server or a configurable parameter.

  It is a feature of the Java EE 6 platform and you can not disable/enable the only feature on weblogic server.

  Try it below to solve the problem

  Connect to the stand-alone server administration console and check if libraries necessary dependency for your application is deployed, or the necessary components have been extended during the creation of the field.

  You could quickly check comparing deployments of libraries on both stand-alone and integrated administration console weblogic server.

  Registered the application libraries is also written in the config.xml file, which can also be used to compare.

  It could be useful!

  Thank you

  Vijaya

• How to enable the TOC in cp Bill?

  I am a new user to Captivate.

  How to enable the TOC in cp Bill? Please suggest

  Go to option menu project-> Table of Contents-> select Show TOC.

  Table of contents will be activated.

• How to enable the Welcome screen in photoshop cc?

  With photoshop the new se update. The home screen has disappeared and I wanted it back. I found it very useful with some of my drawings. How to enable the Welcome screen?

  And just to clarify: Welcome screen has been replaced by the workspace of departure, completed by the advice that the Welcome screen was (although I admit that's exactly as good).

• How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  This is not possible with the way in which we collect information.