Participate in a network Windows with Samba server

Similar Questions

• How do I correspond to a network on a Samba server drive

  Data are collected to an Analyzer and stored in a specific network drive, in a Samba server.

  There is one person who can access the drive from a specific computer.

  I would like to know how to map that drive network hard so that all laboratory personnel can access the data.

  Hello

  What operating system do you work?

  People with privileges sufficient to access the shared network drive can also access the mapped drive. See the steps in the following article on how to map a network drive.

  Create a shortcut to (map) a network drive.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-shortcut-to-map-a-network-drive

• How to automatically synchronize with the server?

  Sometimes, know that the computer time is delayed by 1 minute.

  Not the window with the server automatically synchronize? or I have to do it manually?

  Can be set automatically updated time by server?

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  It does it automatically. See http://i.imgur.com/KH7s4q9.png

• WIndows 7 and Server 2008 machines won't remember preferences of network discovery, needs to set every time you start up or wake up.

  Hello

  I was wondering if anyone here could be kind enough to help me solve this situation

  I have two machines Windows 7 and Server 2008 machines remember preferences of network discovery.

  I use the software on the windows server that collects data and information to two windows 7 machines and discover the network is necessary for this purpose

  These machines are set up in an autonomous local network set up as a working group the only other points on the network are none based on PC hardware that fortunately, the server communicates with and reads the data of

  Once network discovery is defined for the network, the system works as expected, but on each startup (or wake up) network discovery is lost and need to be authorized. This is the case at the time windows server 20008 r2 and windows 7

  How can I make these permanent preferences. for that it restarts and re establish communication its self without intervention

  am I missing a setting or if not is there a way I can script the selection preference on each start (/wake) upwards.

  the end user must be able to turn on the system / restart and use it with needing to have any IT / networking of knowledge to the outside to get the system running.

  Thank you for taking the time to read my request

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• Windows 7 cannot see Raspberry Pi Samba Server

  Hello

  I have two Windows 7 computers portable and a raspberry on my network Pi domestic.  The Raspberry Pi is configured as a Samba server.  Both portable Windows can see folders and each other, but only one of the portable displays the IP on the network.

  As far as I can see, both Windows 7 machines are configured identically.  On the machine that does not see the IP, I tried to disable the firewall, but that makes no difference.

  How can I study and fix this please?

  Best regards

  David

  Hello

  Thank you for visiting Microsoft Community.

  According to the description, I understand that your Windows laptops can see shared folders and each other, but only one of the portable displays the IP on the network.

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

  Thank you.

  Sincerely,

  Ankit Rajput

• network card for windows 2000 advanced server

  Dear forum,

  Is the type of network E1000 has not quite with WIndows 2000 Adv Server SP4.

  My ESX Server is also 4.0 Update 1 and VCenter.

  Thank you...

  Flexible will be the choice for W2K

  http://KB.VMware.com/kb/1001805

• T200v server with Windows Small Business SERVER 2003

  Just ordered a server TS200v, can I install Windows Small Business SERVER 2003 on this server, or do I have to upgrade to Windows SBS 2008?

  Hello

  SBS2003 is not officially supported, I think that 2008 alone is. You can try but might be a problem with some drivers.

  J.

• Any server time I select to synchronize the time with, it is said: ' year error occurred while Windows timed with, (insert.server.here).

  Choose any server to synchronize the time with, it says, "an error occurred while Windows timed (insert.server.here) with," can someone please tell me why this is, or particularly how to solve this problem?  I am trying to connect to NetFlix with Windows Media Center, and as you can probably guess, I'll have no chance.  He told me, INVALID TIME SETTINGS.  Your computer's clock is set for an hour and invalid date or is not correctly adjusted for daylight saving time.  Update the settings of the clock, then try again.  Even when I set the time manually it will not work.  I just don't understand.  Help, please!

  Hello

  How to fix synchronization of time Internet - add your own time server
  http://www.edbott.com/weblog/?p=1779

  Dealing with Windows Vista time sync problems
  http://www.howtogeek.com/HOWTO/Windows-Vista/dealing-with-Windows-Vista-time-sync-problems/

  Synchronize your clock with time servers Internet from the Vista command prompt
  http://www.howtogeek.com/HOWTO/Windows-Vista/sync-your-clock-with-Internet-time-servers-from-the-Vista-command-prompt/

  Time synchronization on Windows XP and Vista with Internet
  http://www.techexams.NET/blogs/jdmurray/synchronizing-the-time-on-Windows-XP-and-Vista-with-the-Internet/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Mail is not interacting with the server.

  When Windows Mail (WM) is open, it will download 2 of each incoming e-mail.  Conducted a comprehensive analysis of the system, no problem.  Talked with our server provider, we ran the test emails to see if WM was interacting with the server and it is not.  Is also not to keep my ID and password to log on the server. Y at - it an update I missed it to avoid these problems?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It causes a frequent there have new antivirus scan program messages.  Uninstall your AV program and reinstall without any mail analysis feature.  You will be just as safe.

  Another common cause is to have two e-mail accounts, referring to the same mailbox.  The send/receive operation can access two accounts at the same time and both can download the message even if they both refer to the same mailbox. Brian Tillman [MVP-Outlook]

• MMC hangs with print server when I try to print a test page for the server. Windows Server 2008R2 Printer HP1606n

  MMC hangs with print server when I try to print a test page for the server.

  Windows Server 2008R2

  Printer HP1606n

  Signature of the problem:
  Problem event name: BEX64
  Application name: mmc.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc808
  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655
  Timestamp of Module error: 4dba6516
  Exception offset: 00000000000159bd
  Exception code: c0000409
  Exception data: 0000000000000000
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033
  Information additional 01:00 c 6
  More information 2: 00c62f6d4134d9a2c3306d7c5b5b94b0
  3 more information: c9eb
  Additional information 4: c9eba0fb841db4dab90b359385c03455

  The module that seems to be the cause of the accident is the hp1100su.dll:

  Fault Module name: hp1100su.dll
  Fault Module Version: 0.3.1.36655

  The hp1100su.dll is a part of the driver for the printer.

  What you could try is uninstalling and reinstalling the driver of printer using the version of HP.

  I believe that the following may be the printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110410

• My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.

  My computer is connected to the Windows 2008 R2 server and some of the users on this computer receive their network drive mapped on group policy and some do not.  I find nothing in Event Viewer that shows that there is a problem.  Please let me know what to do to get the disks appears

  Original title: Network Networking file sharing file sharing file sharing file sharing discovery sharing Fileshare share shared

  Hi,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

  Hope this information helps.

• Portable JDBC with SQL Server on 64-bit Windows computer connection

  I'm trying to set up this connection using a call for open source Modelsphere.

  I am running home premium windows version 7.

  I downloaded the 4.0 driver JDBC Microsoft SQL Server (sqldbc4.jar) and put it in this directory:

  c:\Program Files\Java\JRE6\Lib\Ext

  The class I use the Modelsphere application is: com.microsoft.jdbc.sqlserver.SQLServerDriver

  The database url is: jdbc:sqlserver://localhost: / CallSheet.

  I enabled using the Configuration of TCP/IP Manager.

  I also enabled the telnet, but when I try to command: telnet 192.168.0.0 1433 or telnet 192.168.1.1 1433 I get an error saying "could not open connection to the host on port 1433: connection failed."

  What else, need to do or change to get the connection work?

  Thanks in advance.

  Hi RStraka,

  I had a problem with SQL Server and I posted in the Microsoft Technet folder and it has helped me.

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/

  All the best!

• Windows store error "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  Original title: Windows 8 store does not.

  Whenever I try to open the windows store, I get the message: "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  This happens constantly, and because of that I have not been able to upgrade to Windows 8.1.

  Hello

  This behavior can occur if the antivirus application blocking the app Store or changes due to some recent on the computer.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Make sure that your PC is up to date

  Make sure that updates are installed on your PC and that your antivirus program does not prevent the application from running. For more information about installing updates for your PC, see Windows Update: frequently asked questions.

  Method 2:

  Run 'Windows Apps Store' convenience store

  You must be logged in as an administrator in order to run the "Windows Store Apps" troubleshooter. This tool can automatically find and fix some issues with applications. It is available in English only, but will work in all languages. You can let automatically try to fix any problems found, or select what you want made repairs.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 3:

  I suggest you delete the Windows Store cache and check how it works.

  1. Press Windows + R logo
  2. Type wsreset.exe in the run window, and then press ENTER.

  Method 4:

  Define the Apps approved in third program Antivirus- If you have a third party AV program installed, check its settings to make sure that the app Store works is not changed to be approved. If the AV program has the app as unreliable, it will block and prevent opening the app.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Problem with: Clone, windows with a single NETWORK adapter

  Hello

  I have some bad problems while trying to use the following workflow: 'Clone, windows with a single NETWORK card. I always get the following error message: "task"CloneVM_Task"error: a specified parameter was not correct. "

  "Spec.Identity.Password.Value (name of the dynamic Script Module: vim3WaitTaskEnd #20).

  So I guess I have a problem with a password but I don't know what password, I give for the input parameter "channel passwork. It is encrypted if the indicator planText partner is false"I do not understand what password I would give here because I do not give any account of domain user.

  Is there anyone who has already used this workflow and can give me some advice on how to use it properly?

  Any help is appreciated.

  Thank you

  If I remember correctly, that's your administrator password local if it has been defined or the new password set if the model is no password defined. But then I did years ago doublecheck Yes.