Have a dialog box showing when the page is to submit.

Similar Questions

• Report do not show when the page is refreshing

  Hello
  
  I have a report of patient privacy and I have a column in the report at the end of TREATMENT DETAILS. When I click on DETAILS of TREATMENT and then move page command no 2. This page show me last visit treatment details report in a region and here I use the second area I add the current processing status. There is point four
  
  Checkbox name 1-disease
  2 - symptoms name box
  Checkbox name of 3 treatments
  medicine-4 Select name
  My first query of the region is

  select A.P_NO,A.P_NAME,B.DISEASE,B.SYMPTOMS, B.VISITING_DATE,B.TRET_NAME,B.MED_NAME,B.MED_COUNT FROM PATIENT_DETAILS A, PATIENT_SYMPTOMS B WHERE A.P_NO=B.P_NO AND A.P_NO =:REQUEST

  using these four point I fill in the details of current patient treatment and resend medicine by using select list but if he is NOT as medicine of Disprine salt; ECT list then add new drug I create a link when I click on this link then control will again page-3 and add new drug .but after submitting the new medicine and click on the "BACK" button then control access page - 2 and the treatment of the patients first region report do not show.
  
  I want to show this report when I click the back button on the page of no - 3.
  
  How can I do this...
  
  Thank you
  
  Published by: Ed on April 30, 2010 04:57
  
  Published by: Ed on April 30, 2010 04:58
  
  Published by: Ed on April 30, 2010 05:48

  Hi Maury,

  I changed your application and it's working now. The problem is, you set the number of patients at the request of page No - 7 when the link in the page no-6 is clicked. When you get back from page no-5 after the addition of medicine, demand comes from page no - 5 and it doesn't have the patient not inside, so the report query returns all the data.

  I added an item hidden in page 7 and I am the focus with the patient No. 6 and used page in the report query. The value of this element will not change until you change it or the session expires or you click on the link in the page no-6 for another patient. Hope this helps :)

  Thank you
  Machaan

• Problem with the dialog box displayed when the RadioButton is selected.

  It is an application with 3 buttons button1, radio 2 and output key that uses System.exit (0)
  The problem is with the dialogs first two buttons

  1. I open the application

  2 Select a radiobutton, I get a dialog box, I click 'ok', dialog will, that's fine.

  3. I choose an another radiobutton button1 or button2, I get the corresponding dialog, BUT know I have to click 'ok' twice to keep it alive.

  I don't know what could be the problem, here is the code:

  package com.thinkingblackberry;
  import net.rim.device.api.system.Display;
  import net.rim.device.api.ui.Color;
  import net.rim.device.api.ui.DrawStyle;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.Graphics;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.component.PasswordEditField;
  import net.rim.device.api.ui.component.RadioButtonField;
  import net.rim.device.api.ui.component.RadioButtonGroup;
  import net.rim.device.api.ui.component.RichTextField;
  import net.rim.device.api.ui.component.Status;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.container.VerticalFieldManager;
  import net.rim.device.api.ui.component.PasswordEditField;
  
  public class HelloWorldScreen1 extends MainScreen implements FieldChangeListener, DrawStyle {
  
      protected static final int RED = 0;
      MButtons fullscreen;
      //protected RadioButtonGroup rbGroup= new RadioButtonGroup();
      public HelloWorldScreen1() {
  
          final RadioButtonGroup rbGroup=new RadioButtonGroup();
  
          setTitle("Application");
  
          RadioButtonField rbField= new RadioButtonField("RadioB1"){
  
              protected void paint(Graphics g){
                  g.setColor(Color.ROSYBROWN);
                  super.paint(g);
              }
          };
          RadioButtonField rbField2= new RadioButtonField("RadioB2"){
              protected void paint(Graphics g){
                  g.setColor(Color.SIENNA);
                  super.paint(g);
              }
          };
          RadioButtonField rbExit=new RadioButtonField("Exit"){
              protected void paint(Graphics g){
                  g.setColor(Color.DARKSLATEBLUE);
                  super.paint(g);
              }
          };;
          rbGroup.add(rbField);
          rbGroup.add(rbField2);
          rbGroup.add(rbExit);
          add(rbField);
          add(rbField2);
          add(rbExit);
  
          rbGroup.setChangeListener(new FieldChangeListener() {
              public void fieldChanged(Field field, int context) {
              if (rbGroup.getSelectedIndex() == 0) {
                  Dialog.inform( ""+rbGroup.getSelectedIndex());
  
              }
              else if (rbGroup.getSelectedIndex() == 1) {
                  Dialog.inform( ""+rbGroup.getSelectedIndex());
              }
              else if(rbGroup.getSelectedIndex()==2){
  
                  System.exit(0);
              }
  
              }
          });
  
      }
  
      public HelloWorldScreen1(long arg0) {
          super(arg0);
      }
  
      public void fieldChanged(Field field, int context) {
  
      }
  
  }
  

  I guess the event changed field is called twice, once deselection button1 and once to select button2. you pay your processing logic to account for this.

• Why is that when I run AE I have a dialog box indicating, renew the subscription? Is there a way to fix this?

  I have CS6 and I do not wish to upgrade since I use this program for your pleasure and not for business. I would like to know why this message after downloading the update for AE cs6 run on my mac 10.9.5.  Is there a software patch or future fix?

  Thank you.

  In the same pop-up, locate the option " have a different Adobe ID ".

  Click it, and then sign in using the same Adobe ID n password once again...

  Always the same?

  Disconnect from The Adobe Creative Cloud app and sign in again and check:

  Connect and disconnect activate Cloud Creative applications

• Hide/show items based on another point when the page is rendered.

  Hello
  
  I am trying to hide or display the elements on the page when the page is rendered according to the value of a checkbox control.
  
  That's what I use.
  
  Body HTML attribute:
  
  OnLoad = "initialCheck (); »
  
  
  Header HTML:
  

  function initialCheck () {
     if (html_GetElement('P21_BEN_SAVINGS').value != 'YES') {
        html_HideItemRow('P21_COST_SAVING');
        html_HideItemRow('P21_LOCATION_CODE');
        html_HideItemRow('P21_ACCOUNT_NO');
        html_HideItemRow('P21_SVG_DEPT');
        html_HideItemRow('P21_RATIONALE');
     } else {
        html_ShowItemRow('P21_COST_SAVING'); 
        html_ShowItemRow('P21_LOCATION_CODE');
        html_ShowItemRow('P21_ACCOUNT_NO');
        html_ShowItemRow('P21_SVG_DEPT');
        html_ShowItemRow('P21_RATIONALE');
     }
  }

  I want the items listed to show when the page is loaded when the P21_BEN_SAVINGS is checked (equal to 'YES'), but they are hidden in this situation.
  
  I see not the onload call in Firebug, and I don't know if it is the configuration of firebug or that JavaScript is not fair.
  
  Thanks for any help!
  
  Matt

  Hi Matt

  Try this

  function initialCheck () {
     if ($v('P21_BEN_SAVINGS') != 'YES') {
        $x_HideItemRow('P21_COST_SAVING');
        $x_HideItemRow('P21_LOCATION_CODE');
        $x_HideItemRow('P21_ACCOUNT_NO');
        $x_HideItemRow('P21_SVG_DEPT');
        $x_HideItemRow('P21_RATIONALE');
     } else {
        $x_ShowItemRow('P21_COST_SAVING');
        $x_ShowItemRow('P21_LOCATION_CODE');
        $x_ShowItemRow('P21_ACCOUNT_NO');
        $x_ShowItemRow('P21_SVG_DEPT');
        $x_ShowItemRow('P21_RATIONALE');
     }
  }
  

  Max

  Published by: - Max - April 28, 2010 10:42

  Published by: - Max - April 28, 2010 10:43

• While to download Adobe Camera Raw 5.5 plug, the download dialog box shows completeted, and immediately the page internet explore Flash

  Original title: download problems

  I am running vista with internet explorer 7.

  While I try to download the plugin Adobe Camera Raw 5.5, the download dialog box shows completeted and immediately the internet explore page statrsts flashing. I can't do anything with the computer out to turn it off manually.

  I have Adobe flash Player version 10.3 installed and you have disabled the pop ups.

  Help.

  Nick.

  Hi Nick,

  1 download of Adobe successful or you trying to download again and again?

  2. other than this issue is IE works well?

  You can try to download any add ons mode and check.

  You can temporarily disable all add-ons and check what is happening.

  a. click the Start button, click principally made programs, accessories, click System Tools and then click Internet Explorer (No Add-ons).

  You can visit the following link to download the Adobe Camera Raw 5.5 update

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=4578

  You can also check out the following link and check:

  When you start Internet Explorer, it opens, flashes and then closes immediately

  http://support.Microsoft.com/kb/967896

  Hope this information is useful.

• I can't transfer files flv to mobile to the computer, when I tried to transfer the file, a dialog box indicates that the file is opened in the Media Foundation Pipeline. Exe

  I can't transfer files flv to mobile star Samsung Galaxy of the computer, when I tried to transfer the file, showing a dialog box indicates that the file is opened in the Media Foundation Pipeline. Exe

  Discussions were merged.

  Deleted duplicate.

  Hello Arun,

  Thanks for posting back.

  If you have successfully transferred your files and they are stored in a location on the hard disk, that is, in a folder or drive on your computer, they will remain on your computer, regardless of any number of reboots.

  Hope this information is useful. If the problem persists, please post back for assistance.

• can someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of violeted files

  Ideas:

  • Programs you arecan someone help me! I have a P4 with service pack 2 Professional windows installed in it, my problem is that I am unable to copy all files or other animals. a dialog box appears indicating the integrity of files violeted the problems with
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  bastyav,
  We use the exact and some error message in more detail on the issue.  This problem occurs with any file on the disk or only some of them?  You are logged as administrator?  Has anything changed recently (hardware or software)?

  The first thing I would say to run a Virus scan and malware.  If you do not have an antivirus program, then you can get one here: http://www.microsoft.com/Security_essentials/

  If there are no problems found then not try the following steps:
  Run the following commands.

  Chkdsk /r

  http://support.Microsoft.com/kb/315265

  sfc/scannow

  http://support.Microsoft.com/kb/310747

  Let us know the results and the information requested.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The Apple showing in the page settings of ICloud ID does not go and watch my old email address that does not exist as an Apple ID.

  ID showing in the page settings of ICloud Apple won't and watch my old email address that does not exist in the Apple continues to him I identification code is required to sign in this old apple ID, but when I try to reset the password of the site Web of Apple tells me that this 'old' email address is not a piece of identification If that makes sense. I tried to disconnect from ICloud, but always keep asking the password sign to find my Ipad.

  I know my good Apple ID and password and have checked the details on Apple's site that shows the Ipad on the list of devices.

  The Ipad will connect has WiFi and I took it at John Lewis today where I bought it and they think that the problem is being caused by this problem of ID.

  Another that take it to the Apple store, anyone have any suggestions please?

  Welcome to the Apple community.

  If you are unable to remember your password, security issues, do not have access to your address of rescue or are unable to reset your password for any reason, your only option is to contact the Support of Apple ID, to speak to an operator you should explain that your problem is related to your Apple ID This way you can be attributed to the assistance, even if you do not have an AppleCare plan.

  You will need to be patient with the process and to be ready to prove without doubt that the account belongs to you. Do not expect access to be restored immediately and if you are not the owner of the Apple ID saved to the device the account will not be reset.

• whenever I start my windows, the dialog box appears with the words "persistence module a work stoppage" how to fix this problem?

  whenever I start my windows, the dialog box appears with the words "persistence module a work stoppage" how to fix this problem? someone help me please tell how to fix

  Hello

  1. have there been recent changes to the computer before the show?

  I suggest you to try the steps below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• File copy/delete dialog box is off the screen in a staggered multiple follow Setup

  I'm on Windows 8 on a ThinkPad W520 with a 1920 x 1080 screen and a secondary antibody NEC LCD2070NX 1600 x 1200 display connected via DisplayPort. The NEC is positioned to the left of the ThinkPad and raised higher than the ThinkPad display; the bottom of the NEC is near the center of the left edge of the ThinkPad.

  I put to the top of the poster in the Panel to take account of this arrangement:

  http://mg.to/bugs/Windows/display-settings.PNG

  If I have a window of the Explorer of files open in the secondary monitor on the left and use this window to copy or remove some large files or folders, the progress dialog box is not visible. It is currently displayed in the "man no of land" above the main monitor and the secondary screen.

  The problem occurs when the secondary monitor is on the right, or above or below the primary. (I have tested some of these cases, but not completely). Also, this does not happen when the Explorer window is on the primary monitor. The problem does occur at all on Windows 7.

  Here's a film that illustrates the problem. For each image, I copied a large directory on the network and took a screenshot to display side by side and move the secondary display up to about 120 pixels in the control panel every time. You can see how the copy dialog box follows the secondary monitor vertically, but her left side is pinned to the left edge of the main screen, so he ends up disappearing from the screen.

  http://mg.to/bugs/Windows/multiple-display-bug.wmv

  It is easy to see what is happening here: Explorer normally centers the dialog box of progression on the same screen as the Explorer window that opened the dialog box. This does not work as expected in the direction, but on the axis X to the left edge of the dialog box's get pinned to the left edge of the main screen.

  As the corner at the top left of the primary monitor is always (0,0), it acts as if the dialog box was positioned like this pseudo-code:

  monitor = getWindowMonitor (feed)

  dialog.centerOnMonitor (monitor)

  If dialog.left< 0:="">

  Dialog.Left = 0

  When the dialog box is off the screen, it's a bit disturbing, because it makes the impression that the Explorer window is locked. The only way I know to make visible the dialog box is with this exercise of the superpowers of keyboard shortcut:

  1. use Alt + space to open the system menu of the dialog box. The menu will open on the screen no matter where is the dialog box.

  2. Press m to move (or click on move).

  3. you will see a four-headed mouse cursor, just to fool you into thinking the mouse could do something now. It will not!

  4 instead of this, you have to hit any key of the arrow, which begins the displacement of the dialog box.

  5. now you can use the mouse (or the puree on the arrow keys) to move the dialog on the screen.

  A bit of good news...

  I just tested this on the latest version of Windows preview 10 technical, and it seems to be fixed.

• Get the values of default table row when the page loads

  Hello

  I am running JDev 11.1.1.7. We have a page that contains two tables in a relationship of the master / detail of nickname. We can do a real master ADF / detail with view items related because the query for the 2nd table is complex and works best when queries with binding settings. The View object for the 2nd table has a request with 2 link params as it can get in the first table. Thus, when a line is selected in the first table we want to execute ExecuteWithParams on the object from view of the table 2. We do it in the Bean managed for the page in a method that is the selection to the first table listener. It works fine except when the page initially loads, the first line is selected by default. When the default value is selected the selection listener is not triggered.

  I've seen the suggestion of not having a line selected by default when the page loads by removing the value selectedRowKeys on the table. However, we do not want that the 1st row of the table secondary master to be selected by default and we as the table of detail to show the correct corresponding lines.

  Steve

  Steve,

  Not really sure when you say that the 2nd table is complex and may not use the master detail. If the settings link in the parent table, you can set the ViewLink accordingly and it should work, right?

  In any case, if you're after the execution of methods on the loading of the page, you will find the links below.

  If it's a working group, you can add a methodCall as activity by default and UTF, you can use phase listener (if listener server does not).

  https://blogs.Oracle.com/aramamoo/entry/an_epic_question_how_to

  Advice from the Oracle Johny: ADF: how to run the ViewObject with a ViewCriteria on the PageLoad in Application Web ADF

  It will be useful.

  See you soon

  AJ

• Bug in dialog box "... the form" adjustment of the mask?

  I just posted this in the Adobe bug report, but wanted to make sure it is a bug of software, not a personal fault. Did anyone else encounter this problem and have you found a solution?  Thank you!

  Problem: Definition left and right side a rectangular mask to the same number in the mask dialog box "Form."... "causes the mask to be unusable.

  Steps to reproduce the Bug:

  1. create a new model of px 500 x 500, new comp solid size and double-click Rect. mask tool to create a full size mask.

  2 adjust the mask using the "Shape" dialog box to set the left and right to 250. Output dialog.

  3.re - enter in the dialog box and try to make any changes to the left and to the right, or try to reset the rectangular box.

  Results:

  The changes will not be saved out of the dialog box.  This is the case when you work with keyframes or not. It should also be noted that if a mask is done this way, then a new keyframe, the mask is "reset", the shape will not change, but I noticed that points are.

  It seems that when the mask sharing the left and right sides identical, it confuses the points and cannot properly open the mask up.

  Hi Greg,.

  I saw your bug report and was able to reproduce the problem.

  The problem occurs only when the left/right or up/down pairs have exactly the same value. Changing the value of the left or top will also change the law or low value, respectively. and change the value to the right or bottom is not saved when you OK from the dialog box.

  My hunch is that this bug is related to the logic in the form of mask Panel that corrects the values so that the left value can never be greater than the fair value or the value never greater than the background value. (This logic ensures that left is always left or right and top are always above the background.)

  This bug seems to have been in After Effects at least several years (9.0 or a previous version). Anyway, apologies for the disruption.

• How to display data when the page loads

  I use JDeveloper/Oracle ADF 11.1.2.3.0.
  
  I have a jsf with a table page that was built by a named query. I chose the research with the table option when you drag the query named on the page.
  
  The named query uses a connection variable which is not set with the loading of the page. Therefore, no data is display even if the query is executed.
  
  But, I can then click on the button Search and display of the data.
  
  I tried to set the default value of the variable binding '%' in the OV, but that did not work.
  
  So, is it possible that I can get all the data displayed when the page is loaded. Perhaps by the calling program the by clicking the search button?
  
  Thanks for your help.

  Open the criteria to view that you defined in the t for your group, "indication of interface user" tab and check the box 'automatically interrogate. "

  Timo

• Open pop-up window when the page opens

  HI, I need to have a box pop up of whatever nature which opens when the page is opened and can be closed by the user.  It will contain an important news flash.

  I know that this should be possible using behaviors, but cannot get out - can anyone help?

  Thank you

  SW

  Google brings a few - this should suit your needs:

  loading the page http://www.dynamicdrive.com/forums/showthread.php?56899-jQuery-Popup-Window-that-opens-on-